GOST 19681-94

ГОСТ 19681-94

Sanitary technical water mixing and distributing accessories. General specifications

Арматура санитарно-техническая водоразборная. Общие технические условия

Status: Not effective - Superseded. Registration information 1920-st from 12/02/2016 (the official website of Rosstandart); IUS 5-2017

This standard applies to water fittings: mixers, taps and laboratory fittings: nipples, panels, etc. (hereinafter referred to as fittings) for cold and hot water at an operating pressure of from 0.05 to 1.0 MPa and temperatures up to 75 ° C, designed for sanitary appliances and water heaters open type, installed in buildings for various purposes. The standard does not apply to valves intended for sea and mineral water and for working in aggressive environments, as well as to filling valves for flush tanks and flush valves.

Настоящий стандарт распространяется на водоразборную арматуру: смесители, краны и лабораторную арматуру: ниппели, панели и др. (далее - арматуру) для холодной и горячей воды при рабочем давлении от 0,05 до 1,0 МПа и температуре до 75°С, предназначенную для санитарно-технических приборов и водоподогревателей открытого типа, устанавливаемых в зданиях различного назначения. Стандарт не распространяется на арматуру, предназначенную для морской и минеральной воды и для работы в агрессивной среде, а также на наполнительные клапаны к смывным бачкам и на смывные краны.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Ministry of Construction of Russia, 10/9/1995

SKU: RUSS69026

Price: $187.00




The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Documents System of normative documents in construction » 4. Normative documents for engineering equipment of buildings and structures and external networks » к.40 Water supply and sewerage »

Standards for pipe fittings (TPA) » 3. Piping valves (TPA) standards for industries » 3.7 For construction and housing and communal services »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.13 Testing and control of products of engineering industry » 4.13.2 Machines and equipment for special purposes » 4.13.2.14 Fire equipment, machinery and equipment for public utilities »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.140 Installations in buildings » 91.140.70 Sanitary equipment »

National standards » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.140 Installations in buildings » 91.140.70 Plumbing equipment »

National Standards for KGS (State Standards Classification) » Latest edition » Zh Construction and building materials » Zh2 Sanitary, engineering and fire fighting equipment for buildings » Zh21 Water supply and sewerage »


The Document is Replaced With:

GOST 19681-2016: Sanitary and technical water fittings. General specifications

As a Replacement Of:

GOST 19681-83: Water mixing and distribution accessories for sanitary and laboratory applications. General technical requirements

GOST 4.216-81: Quality ratings system. Building. Water mixing and distribution accessories for sanitary and laboratory appelication. Nomenclature of characteristics

The Document References:

GOST 10007-80: Polytetrafluoroethylene. Specifications

GOST 1020-77: Cast brass ingots. Specifications

GOST 1020-97: Casting brass in pigs. Specifications

GOST 10589-87: Moulding polyamide 610. Specification

GOST 1066-90: Brass wire

GOST 1215-79: Malleable iron castings

GOST 12920-67: Brass wire for cold upsetting. Specifications

GOST 13536-68: Round thread for sanitary fittings. Profile, basic dimensions, tolerances

GOST 14192-77: Marking of cargoes

GOST 14192-96: Cargo marking

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 15527-70: Copper zinc pressure treated alloys (brasses). Types

GOST 15834-77: Wire from beryllium bronze

GOST 15846-2002: Production for transportation to the areas of Far North and similar regions. Packing, marking, transportation and storage

GOST 15846-79: Products for transportation to the areas of the far north and remote regions

GOST 16338-85: Low-pressure polyethylene. Specifications

GOST 17711-80: Cast copper-zinc alloys (brass)

GOST 17711-93: Cast copper-zink alloys (brass). Grades

GOST 18829-73: Rubber o-ring seals for hydraulic and pneumatic equipment. Specifications

GOST 19681-83: Water mixing and distribution accessories for sanitary and laboratory applications. General technical requirements

GOST 20419-83: Ceramic electrotechnical materials

GOST 2060-90: Brass rods. Specifications

GOST 2208-91: Brass strips for general use. Specifications

GOST 2405-88: Pressure gauges, vacuum gauges, pressure-vacuum gauges, pressure meters, draft gauges and draft-pressure gauges

GOST 24705-81: Basic norms of interchangeability. Metric screw thread. Basic dimensions

GOST 24737-81: Basic norms of interchangeability. Trapezoidal single-start screw thread. Basic dimensions

GOST 25809-83: Water supply mixing valves. Types and main dimensions

GOST 25809-96: Water supply mixing valves and taps. Types and principal dimensions

GOST 26358-84: Pig iron castings

GOST 26996-86: Polypropylene and copolymers of propylene. Specifications

GOST 27679-88: Noise protection in building. Appliances and equipment used in water supply installations. Method of laboratory measurement of noise

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST 28250-89: High-impact polystyrene. Specifications

GOST 380-88: Common quality carbon steel. Grades

GOST 380-94: Normal quality carbon steel

GOST 4.216-81: Quality ratings system. Building. Water mixing and distribution accessories for sanitary and laboratory appelication. Nomenclature of characteristics

GOST 494-90: Pipes of brass

GOST 5221-77: Tin-zinc bronze wire

GOST 5222-72: Silicon-manganese bronze wire

GOST 5362-78: Brass ribbons. Specifications

GOST 5496-78: Rubber technical tubes. Specifications

GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades

GOST 613-79: Tin foundry bronzes. Grades

GOST 614-73: Tin bronze in pigs. Specifications

GOST 614-97: Casting bronzes in pigs. Specifications

GOST 617-90: Copper tubes. Specifications

GOST 6357-81: Basic norms of interchangeability pipe cylindrical thread

GOST 7293-85: Cast iron with globular graphite for foundry

GOST 7338-90: Rubber and rubber-fabric sheets. Specifications

GOST 8870-79: Water heaters for baths. Specifications

GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements

GOST 9.301-86: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. General requirements

GOST 9.302-88: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods

GOST 9.303-84: Unified system of corrosion and ageing protection. Metallic and non-metallic inorganic coatings. General requirements for selection

GOST 931-90: Brass sheets and strips. Specifications

GOST 9833-73: Rubber toroidal sealing rings for hydraulic and pneumatic equipment. Construction and dimensions

OK 005-93: All-Russia Classification of Products (Part 1)

OK 005-93: All-Russia Product Classification (OKP) (Part 13)

OK 005-93: All-Russia Classification of Products (OKP)

OK 005-93: All-Russia Classification of Products (Part 17)

OK 005-93: All-Russia Product Classification (OKP) (Part 3)

OK 005-93: All-Russia Classification of Products (OKP) (Part 4)

OK 005-93: All-Russia Classification of Products (Part 5)

OK 005-93: All-Russia Classification of Products (Part 6)

OK 005-93: All-Russia Product Classification (OKP) (Part 7)

OK 005-93: All-Russia Classification of Products (OKP) (Part 8)

OK 005-93: All-Russia Classification of Products (part 9)

OK 005-93: All-Russia Classification of Products (OKP) (Part 10)

OK 005-93: All-Russia Classification of Products (Part 11)

OK 005-93: All-Russia Classification of Products (part 12)

OK 005-93: All-Russia Classification of Products (OKP) (Part 14)

OK 005-93: All-Russia Classification of Products (part 15)

OK 005-93: All-Russia Classification of Products (Part 16)

OK 005-93: All-Russia Classification of Products (Part 17)

OK 005-93: All-Russia Classification of Products (Part 18)

OK 005-93: All-Russia Classification of Products (Part 19)

OK 005-93: All-Russia Classification of Products (Part 18)

OK 005-93: All-Russia Classification of Products (Part 21)

OK 005-93: All-Russia Classification of Products (OKP) (Part 22)

The Document is Referenced By:

GOST 13536-68: Round thread for sanitary fittings. Profile, basic dimensions, tolerances

GOST 25809-96: Water supply mixing valves and taps. Types and principal dimensions

GOST 34059-2017: Internal buildings and structures utilities. Arrangement of heating, heating and cooling water supply systems. General technical requirements

GOST 8870-79: Water heaters for baths. Specifications

GOST R 54865-2011: Heat supply of buildings. Method for calculation of energy requirements and efficiencies for of heat generation with heat pump systems

ST TsKBA 007-2004: Pipe fittings. Organizing and conducting an industrial safety review of pipeline valves operated at hazardous production facilities

Customers Who Viewed This Item Also Viewed:

Petroleum for oil-processing plants. Specifications
Language: English
Price: $18.00
Electrical articles. General requirement for environment mechanical stability
Language: English
Price: $28.00
Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
Power transformer on-load tap-changing devices. General specifications
Language: English
Price: $167.00
Conical pipe thread. Profile, basic dimensions and tolerances
Language: English
Price: $71.00
Glass and glass products. Visual faults. Terms and definitions
Language: English
Price: $158.00
Glass and glass products. Inspection methods for geometric parameters and appearance
Language: English
Price: $110.00
Weldable deformed reinforcing rolled products of A500C and B500C classes for reinforcement of concrete constructions. Specifications
Language: English
Price: $112.00
Crude petroleum. General specifications
Language: English
Price: $58.00
Power transformers. Test methods of tap changing devices
Language: English
Price: $626.00
Unified system for design documentation. Stages of designing
Language: English
Price: $71.00
White sugar. Specifications
Language: English
Price: $279.00
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $215.00
Rolled of normal, increased - and high-strength steel for shipbuilding. Specifications
Language: English
Price: $1,639.74
Guidelines for the photometric determination of hydrogen sulfide in the air
Language: English
Price: $62.00
Tempered glass. Specifications.
Language: English
Price: $149.00
Glass with low emissivity hard coating. Specifications.
Language: English
Price: $212.00
Glass laminated. Specifications.
Language: English
Price: $231.00
Water quality. Sewage water
Language: English
Price: $120.30
Passenger cars. Windscreen defrosting and demisting systems. Technical requirements and test methods
Language: English
Price: $97.00

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!