imgalt

GOST R 53192-2008

ГОСТ Р 53192-2008

Welded steel structures of freight cars. Technical requirements

Конструкции стальные сварные грузовых вагонов. Технические требования

Status: Not effective - Superseded. Registration information 1985-st dated 12.12.2014 (official website of Rosstandart); (IUS 8-2015)

This standard applies to rail freight cars (boxcars, gondola cars, platforms, tanks, specialized freight cars: bunker-type cars, thermoses, refrigerator cars, including stand-alone refrigerated cars, grain carriers, conveyors, container ships, and special freight cars ). This standard establishes the technical requirements for steel welded structures of freight cars of climatic versions U and UHL according to GOST 15150

Настоящий стандарт распространяется на грузовые вагоны железных дорог (крытые вагоны, полувагоны, платформы, цистерны, специализированные вагоны для перевозки грузов: вагоны бункерного типа, термосы, рефрижераторные вагоны, включая автономные рефрижераторные вагоны, зерновозы, транспортеры, контейнеровозы, а также специальные вагоны грузового типа). Настоящий стандарт устанавливает технические требования к стальным сварным конструкциям грузовых вагонов климатических исполнений У и УХЛ по ГОСТ 15150

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 12/18/2008

SKU: RUSS69100

Price: $430.00



imgalt

The Product is Contained in the Following Classifiers:

Welding regulations » Welding work »

Welding regulations » Main materials »

Welding regulations » Pipelines »

Welding regulations » Welding materials »

Welding regulations » welding equipment »

Welding regulations » Welding staff »

Welding regulations » Admission Testing »

Welding regulations » Certification »

Welding regulations » Documentation »

Welding regulations » Non-destructive control »

Welding regulations » Mechanical Testing »

Welding regulations » Heat treatment »

Welding regulations » Defects »

Welding regulations » Assembly devices »

Welding regulations » Welding work » Manual welding »

Welding regulations » Welding work » Mechanized welding »

Welding regulations » Welding work » Surfacing »

Welding regulations » Welding work » Dusting »

Welding regulations » Main materials » Steel, cast iron »

Welding regulations » Welding materials » Electrodes »

Welding regulations » Welding materials » Wire »

Welding regulations » Welding materials » Fluxes »

Welding regulations » Welding materials » Gases »

ISO classifier » 45 RAILWAY ENGINEERING » 45.060 Rolling stock of railways »

National standards » 45 RAILWAY ENGINEERING » 45.060 Rolling stock of railways »

ISO classifier » 45 RAILWAY ENGINEERING » 45.060 Rolling stock of railways » 45.060.01 Rolling stock of railways in general »

National standards » 45 RAILWAY ENGINEERING » 45.060 Rolling stock of railways » 45.060.01 Rolling stock of railways in general »

National Standards for KGS (State Standards Classification) » Latest edition » D Vehicles and packaging » D5 Rail transport » D55 Frames, units and parts of rolling stock of railways »


The Document is Replaced With:

GOST R 53192-2014: Welded joints in steel structures of railway rolling stock. Requirements for design, production and quality control

The Document References:

GOST 5264-80: Manual arc welding. Welding joints. Main types, design elements and dimensions

Federal Law 184-FZ: About technical regulation

GOST 10052-75: Metal covered electrodes, for manual arc welding of high-alloyed steels with special properties. Types

GOST 10157-79: Gaseous and liquid argon. Specifications

GOST 103-2006: Hot-rolled steel strips. Dimensions

GOST 103-76: Hot-rolled steel strip. Dimensions

GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications

GOST 10885-85: Hot-rolled two-ply corrosion-resistant steel sheets

GOST 11533-75: Automatic and semiautomatic submerged arc welding. Acute and blunt weld joints. Main types, design elements and dimensions

GOST 11534-75: Hand arc welding. Acute and blunt weld joints. Main types, design elements and dimensions

GOST 12.1.004-91: Fire safety. General requirements

GOST 12.1.005-88: General sanitary requirements for working zone air

GOST 12.1.019-79: Occupational safety standards system. Electric safety. General requirements and nomenclature of kinds of protection

GOST 12.1.030-81: Electrical safety protective grounding, neutral grounding

GOST 12.2.003-91: Industrial equipment. General safety requirements

GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements

GOST 12.2.007.8-75: Devices for electric welding and plasma treatment

GOST 12.2.008-75: Equipment and facilities for gas-flame treatment of metals and thermal

GOST 12.3.002-75: Occupational safety standards system. Manufacturing processes. General safety requirements

GOST 12.3.003-86: Occupational safety standards system Electric welding works. Safety requirements

GOST 12.3.036-84: Occupational safety standards system. Flame machining of metals. Safety requirements

GOST 12169-82: Steel blanks for oxygen cutting. Allowances

GOST 13585-68: Steel. The bead method for determining the allowed welding and building procedures.

GOST 14.201-83: Provision of technological efficiency of products design. General requirements

GOST 14637-89: Thick sheet rolled stock of normal quality carbon steel

GOST 14771-76: Gas-shielded arc welding. Welded joints. Main types, design elements and dimensions

GOST 14776-79: Arc welding. Button welds. Main types, design elements and dimensions

GOST 14792-80: Parts and work pieces made by oxygen and plasma arc cutting. Cut face accuracy and quality

GOST 1497-84: Metals. Methods of tension test

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 15878-79: Resistance welding. Welded joints. Design elements and dimensions

GOST 16037-80: Welded joints in steel pipelines. Main types, design elements and dimensions

GOST 16098-80: Welded joints of clad corrosion resistant steel. Main types, design elements and dimensions

GOST 16523-97: Rolled sheets from quality and ordinary carbon steel for general purposes. Specifications

GOST 19281-89: Rolled steel with increased strength. General specifications

GOST 19903-74: Hot-rolled steel sheets. Dimensions

GOST 19904-90: Cold-rolled steel sheets. Dimensions

GOST 21694-94: Mechanical welding equipment

GOST 2246-70: Welding steel wire. Specifications

GOST 22536.11-87: Carbon steel and unalloyed cast iron. Methods for determination of titanium

GOST 22536.12-88: Carbon steel and unalloyed cast iron. Methods for determination of vanadium

GOST 22536.1-88: Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite

GOST 22536.3-88: Carbon steel and unalloyed cast iron. Methods for determination of phosphorus

GOST 22536.4-88: Carbon steel and unalloyed cast iron. Methods for determination of silicon

GOST 22536.5-87: Carbon steel and unalloyed cast iron. Methods for determination of manganese

GOST 22536.7-88: Carbon steel and unalloyed cast iron. Methods for determination of chromium

GOST 22536.8-87: Carbon steel and unalloyed cast iron. Methods for determination of copper

GOST 22536.9-88: Carbon steel and unalloyed cast iron. Methods for determination of nickel

GOST 23518-79: Cas-shielded arc welding. Welded joints. Main types, design elements and dimensions

GOST 24643-81: Basic norms of interchangeability. Tolerances of form and position of surfaces. Numerical values

GOST 25347-82: Basic norms of interchangeability. Unified system of tolerances and fits. Tolerance zones and recommendable fits

GOST 25348-82: Basic norms of interchangeability. Unified system of tolerances and fits. Series of tolerances, basic deviations and tolerance zones for sizes over 3150 mm

GOST 2601-84: Welding of metals. Terms and definitions of basic concepts

GOST 26271-84: Flux-cored wire welding carbon and low-alloy steels. General specifications

GOST 26388-84: Welded joints. Test methods on resistance to cold crack formation under fusion welding

GOST 26389-84: Welded joints. Test methods on resistance to shrinkage crack formation under fusion welding

GOST 30242-97: Imperfections in metallic fusion welds. Classification, designation and definitions

GOST 380-2005: Common quality carbon steel. Grades

GOST 5267.0-90: Hot-rolled sections for car building. General specifications

GOST 5267.10-90: Section of tread rings. Dimensions

GOST 5267.11-90: Section of car threshold. Dimensions

GOST 5267.12-90: Section for door closing. Dimensions

GOST 5267.13-90: Section for door binding. Dimensions

GOST 5267.1-90: Channels. Dimensions

GOST 5267.2-90: Z-section. Dimensions

GOST 5267.3-90: Z-section for centre girder. Dimensions

GOST 5267.4-90: Section of upper binding. Dimensions

GOST 5267.5-90: I-beam section № 19 for centre girder. Dimensions

GOST 5267.6-90: Section of car post. Dimensions

GOST 5267.7-90: Section of upper sheet of open-box car frame cross beam. Dimensions

GOST 5267.8-90: Section of automatic coupling thrust plates. Dimensions

GOST 5267.9-90: Section for automatic coupling wedge. Dimensions

GOST 535-2005: Common quality carbon steel bar and shaped sections. General specifications

GOST 5457-75: Dissolved acetylene and gaseous acetylene for technical purposes. Specifications

GOST 5520-79: Carbon, low-alloy and alloy sheet steel for boilers and pressure vessels. Specifications

GOST 5583-78: Industrial and medical gaseous oxygen

GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades

GOST 6032-2003: Corrosion-resistant steels and alloys. Test methods of intercrystalline corrosion resistance

GOST 6331-78: Industrial and medical liquid oxygen

GOST 6713-91: Low-alloyed structural rolled stock for bridge building. Specifications

GOST 6996-66: Welded joints. Methods of mechanical properties determination

GOST 8050-85: Carbon dioxide,

GOST 8239-89: Steel hot-rolled I-beams

GOST 8240-97: Hot-rolled steel channels. Assortment

GOST 82-70: Universal hot-rolled steel wide strips. Dimensions

GOST 8278-83: Roll-formed steel equal channels. Dimensions

GOST 8479-70: Structural carbon and alloy steel forgings

GOST 8509-93: Hot-rolled steel equal-leg angles. Dimensions

GOST 8510-86: Hot-rolled steel unequal-leg angles. Dimensions

GOST 8645-68: Rectangular steel pipes

GOST 8713-79: Flux welding. Welded joints. Maih types design elements and dimensions

GOST 8732-78: Seamless hot-deformed steel pipes. Range of sizes

GOST 8734-75: Seamless steel tubes cold deformed. Range

GOST 9087-81: Welding melted fluxes

GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature

GOST 9466-75: Covered metal electrodes for manual arc welding of steels and deposition. Classification and general specifications

GOST 9467-75: Metal covered electrodes for manual arc welding of structural and heat-resistant steels. Types

GOST 977-88: Steel castings. General specifications

GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions

GOST R 52400-2005: Air reservoirs for railway brakes. General specifications

PB 03-273-99: Rules for qualification test of welders and welding production specialists

PB 03-576-03: Regulations of design and safe operation of pressure vessels

PB 03-584-03: Rules of design, manufacturing and acceptance of welded steel vessels and apparatuses

PB 12-529-03: Gas distribution and gas consumption system safety rules. Series 12. Revision 4.

SN 245-71: Sanitary standards for the design of industrial enterprises

The Document is Referenced By:

GOST R 55819-2013: Brake block holder and key for railway rolling stock. General specifications

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English
Price: $1,060.25
imgalt
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English
Price: $198.62
imgalt
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English
Price: $41.00
imgalt
Diesel fuel EURO. Specifications
Language: English
Price: $233.00
imgalt
Inch thread with a profile angle of 55 degrees
Language: English
Price: $121.00
imgalt
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English
Price: $178.00
imgalt
Norms of structural design of nuclear power plants with reactors of different types
Language: English
Price: $12.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!