imgalt

GOST 9562-81

ГОСТ 9562-81

Basic norms of interchangeability. Trapezoidal single-start screw thread. Tolerances

Основные нормы взаимозаменяемости. Резьба трапецеидальная однозаходная. Допуски

Status: Valid - Supersedes

The standard applies to single-thread trapezoidal threads with a profile according to GOST 9484-81, diameters and steps according to GOST 24738-81 and establishes a system for tolerances of trapezoidal threads. The standard does not apply to trapezoidal threads intended for precise movements.

Стандарт распространяется на трапецеидальную однозаходную резьбу с профилем по ГОСТ 9484-81, диаметрами и шагами по ГОСТ 24738-81 и устанавливает систему допусков трапецеидальной резьбы. Стандарт не распространяется на трапецеидальные резьбы, предназначенные для осуществления точных перемещений.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: USSR State Committee for Standards, 4/30/1981

SKU: RUSS69162

Price: $446.00



imgalt

The Product is Contained in the Following Classifiers:

ISO classifier » 21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES » 21.040 Screw threads » 21.040.30 Special threads »

National standards » 21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES » 21.040 Screw Threads » 21.040.30 Special threads »

National Standards for KGS (State Standards Classification) » Latest edition » G Machines, equipment and tools » G1 General parts and units of machines » G13 Threads »

National Standards for OKSTU » SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS » Detachable connections (threads, keys, splines, etc.) »


As a Replacement Of:

GOST 9562-60: Tolerances of trapezoidal thread for diameters from 10 to 300 mm

The Document References:

GOST 24738-81: Basic norms of interchangeability. Trapezoidal single-start screw thread. Diameters and pitches

GOST 9484-81: Single trapezoidal thread. Profile. Basic dimensions

GOST 9562-60: Tolerances of trapezoidal thread for diameters from 10 to 300 mm

The Document is Referenced By:

GOST 10071-89: Gauges for trapezoidal tread. Tolerances

GOST 12461-67: Nuts hexagonal high with acme thread. Design

GOST 12462-67: Nuts hexagonal with bead and acme thread. Design

GOST 12464-67: Threaded bushes. Design

GOST 13432-68: Pressure dog point screws with hole for handle for machine retaining devices. Design

GOST 13433-68: Pressure screws with hole for handle and point for foot for machine retaining devices. Design

GOST 13434-68: Hexagon head dog point pressure screws for machine retaining devices. Design

GOST 13435-68: Hexagon head pressure screws with point for foot for machine retaining devices. Design

GOST 14725-69: Eye bolts with acme-thread. Design

GOST 14732-69: Sliding swing clamps shaped. Design

GOST 16261-70: Chill moulds. Screwed locks. Construction and dimensions

GOST 16345-70: Universal single-rolled devices for a surface hardening of machine parts by rolling. Types. Technical requirements

GOST 17574-72: Multiball hard differential rollers by diameters from 40 to 300 mm for dimension-finishing of openings of machine components by pressure. Technical requirements

GOST 19135-80: Domestic siphons. Specifications

GOST 2016-86: Thread gauges. Specifications

GOST 20928-75: Shank of the unit for changeable compression moulding press-moulds. Construction and dimensions

GOST 22473-77: Devices for fixing and securing the patterns on master pattern plates. Design and dimensions

GOST 24739-81: Basic norms of interchangeability. Trapezoidal multi-start screw thread

GOST 24939-81: Gauges for parallel threads. Types

GOST 26540-85: Straight shanks for adjustable bushes and arbours and locking nuts main characteristics

GOST 26582-85: Food (manufacturing) industry machines and equipment

GOST 27204-87: Steel moulds for reinforced concrete members. Sides. Construction and dimensions

GOST 27962-88: Industrial equipment

GOST 28119-89: Building-block machines. Adapters and adjustable bushes and locking nuts. Design

GOST 30894-2003: Production well head equipment. General technical requirements

GOST 31.0171.01-91: Devices for metal cutting machine tools. Parts and assembly units of general application. General technical requirements

GOST 31.111.41-83: System of standards for technological arrangement. Elements and assembly juntions of universal assembly devices for metal-cutting machines. Basic parameters. Constructive elements. Precision norms

GOST 31.111.41-93: Parts and assembly units of universal assembly devices for metal-cutting machines. Basic parameters. Constructive elements. Norms of accuracy

GOST 31.121.41-84: Elements and assemblies of universal built-up and readjusted equipment for metal-cutting machines (ubre)

GOST 31.211.41-93: Parts and assembly units of collapsible fixtures for assembly and welding

GOST 31.211.42-93: Elements and assembly units of detachable fixtures for assembly and welding

GOST 4734-69: Swing clamp straps. Design

GOST 4735-69: Sliging clamp straps. Design

GOST 4740-68: Adjustable forced rests for machine retaining devices. Design

GOST 4741-68: Thread ransitional bushes for machine retaining devices. Design

GOST 6628-73: Ramshorn hooks. Blanks. Type. Construction and dimensions

GOST 9057-69: Double-sided swing clamp straps. Construction

OST 24.191.04: Single-end hooks. Types and dimensions

OST 24.895.03: Wedge jacks, mechanical and hydraulic. Parameters, basic dimensions, technical requirements

OST 26-07-1232-87: General engineering pipeline fittings. Running thread pairs. Main dimensions. Technical requirements.

OST 48-41-91: Engineering products of non-ferrous metallurgy. General Specifications.

RD 153-34.1-39.603-99: Fittings repair manual of high parameters.

RD 22-207-88: Lifting machines. General requirements and production standards

RD 24.207.08-90: Pipe fittings. Running threaded pairs. Main dimensions and technical requirements. Recommendations for use

RD 34 02.028-2007: Technical rules. Mechanical equipment and special steel structures for hydraulic structures. Manufacturing, installation and acceptance.

RD 34.39.601: Guide to Repair of Fittings for Piping Systems at Pressure of 64-100 kgf/sq. cm

RD 36-62-00: Hoisting equipment. General technical requirements.

ST TsKBA 060-2008: Pipe fittings. Running threaded pairs. Main dimensions, technical requirements

ST TsKBA 099-2011: Pipe fittings. Repairs. Organization of repair and general repair manual

TU 34-38-20197-94: Valves for steam and water DN 10, 20, 40, 50, 65 mm Chekhov factory of power engineering. Technical conditions for major repairs

TU 34-38-20365-94: Power valves. General technical conditions for major repairs

TU 34-38-20409-94: Pulse-safety devices Chekhov factory of power engineering. General technical conditions for major repairs

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English
Price: $201.00
imgalt
Metals. Methods of tension test
Language: English
Price: $469.00
imgalt
Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
Language: English
Price: $398.00
imgalt
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English
Price: $295.00
imgalt
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English
Price: $299.00
imgalt
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English
Price: $282.00
imgalt
Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
Language: English
Price: $96.00
imgalt
Dependability in technics. Terms and definitions
Language: English
Price: $233.00
imgalt
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English
Price: $542.00
imgalt
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English
Price: $205.00
imgalt
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English
Price: $282.00
imgalt
Natural gas for industrial and municipal purposes. Technical conditions
Language: English
Price: $267.00
imgalt
Global navigation satellite system. Emergency response system in case of accidents. Test methods for emergency services call device/system for compliance with the requirements for the quality of loudspeaker communication in the vehicle cab.
Language: English
Price: $1,126.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!