GOST R 8.568-97
ГОСТ Р 8.568-97
|
|
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Государственная система обеспечения единства измерений. Аттестация испытательного оборудования. Основные положения
Status: Not effective - Superseded. Registration information 2121-st dated December 29, 2017 (official website of Rosstandart); IUS 3-2018
This standard establishes the main provisions and procedure for the certification of test equipment.
Настоящий стандарт устанавливает основные положения и порядок проведения аттестации испытательного оборудования
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of Russia,
11/10/1997
SKU: RUSS69170
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
03 Sociology. Services. Organization of firms and their management. Administration. Transport »
Construction (Max) »
Standards »
Other state standards used in construction »
17 Metrology and measurements. Physical phenomena »
Standards for pipe fittings (TPA) »
8. Piping valves (TPA) design »
8.1 General design issues piping valves (TPA) »
8.1.3 Metrology »
Standards for pipe fittings (TPA) »
11. Piping valves (TPA) tests »
11.2 Basic test procedures »
PromExpert »
SECTION II. METROLOGICAL »
I Organizational and technical bases of metrological support »
1 Organization and management of metrological support »
1.3 Accreditation infield of ensuring uniformity of measurements »
ISO classifier »
03 SOCIOLOGY. SERVICES ORGANIZATION AND MANAGEMENT OF COMPANIES. ADMINISTRATION. TRANSPORT »
03.120 Quality »
03.120.20 Certification of products and companies. Conformity assessment »
National standards »
03 SOCIOLOGY. SERVICES ORGANIZATION AND MANAGEMENT OF COMPANIES. ADMINISTRATION. TRANSPORT »
03.120 Quality »
03.120.20 Certification of products and companies. Conformity assessment »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.020 Metrology and measurements in general »
National standards »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.020 Metrology and measurements in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T8 State measurement system »
T80 Rules, norms, regulations infield of ensuring uniformity of measurements »
National Standards for OKSTU »
SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS »
State system for ensuring the uniformity of measurements (GSI) »
The Document is Replaced With:
GOST R 8.568-2017: State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
The Document References:
GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions
GOST 2.601-2006: Unified system for design documentation. Exploitative documents
GOST 24555-81: The state system of testing the production. The procedure of verification of testing equipment. General principle
GOST R 51672-2000: Metrological ensuring of product testing for the assurance of conformity. General principles
GOST R 8.563-96: State system for ensuring the uniformity of measurements. Procedures of measurements
PR 50.2.008-94: National Measurement Standards. Procedure for Accreditation of Lead and Central Organizations of the Metrological Service of Russian Federation Government Administrative Agencies and Associations of Juridical Persons
The Document is Referenced By:
GOST 34468-2018: Center plates for freight cars of 1520 mm track gauge railways. General specifications
GOST 10180-90: Concretes. Methods for strength determination using reference specimens
GOST 10921-2017: Radial and axial fans. Methods of aerodynamic tests
GOST 11030-2017: Motor graders. General specifications
GOST 12.0.005-2014: System of labor safety standards Metrological support in the field of occupational safety. The main provisions
GOST 12.2.063-2015: Pipeline valves. General safety requirements
GOST 12182.0-80: Cables, wires and cords. Methods of control of mechanic action strength. General requirements
GOST 12997-84: SSI Products. General specifications
GOST 16349-85: Cyclic mixers for building materials
GOST 16765-87: General-purpose self-propelled boom cranes. Acceptance and testing methods
GOST 18464-96: Hydraulic fluid power. Hydraulic cylinders. Acceptance rules and test methods
GOST 20.57.406-81: Electrical equipment, devices for electronic technology and quantum electronics
GOST 21216-2014: Clay raw materials. Test methods
GOST 23789-2018: Gypsum binders. Test methods
GOST 24975.1-2015: Ethylene and propylene. Chromatographic methods of analysis
GOST 25.506-85: Design, calculation and strength testing. Methods of mechanical testing of metals. Determination of fracture toughness characteristics under the static loading
GOST 25051.2-82: The state system of testing products. Test chambers of heat and cold. Certification methods
GOST 25051.3-83: Vibration testing equipment. Method of verification
GOST 28570-2019: Concrete Methods for determining the strength of samples taken from structures
GOST 28570-90: Concretes. Methods of strength evaluation on cores drilled from structures
GOST 28697-90: Programme and test methods of bellows compensators and seals. General requirements
GOST 28724-90: Speed gas meters
GOST 28785-90: Preparative ultracentrifuges and rotors
GOST 29037-91: Electromagnetic compatibiliтy of technical means. Certification tests. Ceneral rules
GOST 30248-2013: Electrical carbon products. Electrical heating appliances made of carbon fibre materials. General specifications
GOST 30380-95: Electromagnetic compatibility for consumer video tape recorders. Immunity to electromagnetic disturbance. Test methods
GOST 30381-95: Electromagnetic compatibility of technical means. Specification of electromagnetic waves absorber for shielded chambers
GOST 30513-97: Abrasive and diamond tools. Test methods for safety
GOST 31376-2008: Dry building mixtures based on gypsum binder. Test methods
GOST 31447-2012: Steel weldes pipes for trunk gas pipelines, oil pipelines and oil products pipelines. Specifications
GOST 31812-2012: Civil aviation aircraft and helicopter ground support equipment. General technical requirements
GOST 31817.1.1-2012: Alarm systems. Part 1. General requirements. Section 1. General
GOST 31830-2012: Electrostatic precipitators. Safety requirement and methods of testing
GOST 31841-2012: Petroleum and natural gas industries. Well service equipment. General technical requirements
GOST 31844-2012: Petroleum and natural gas industries. Drilling and production equipment. Hoisting equipment. General technical equipments
GOST 31901-2013: Pipeline valves for nuclear stations. General specifications
GOST 32207-2013: Wheel for railway stock. Methods of residual stress determination
GOST 32210-2013: Emission of the exhaust gas pollutants by the main-line and shunting of the special-purpose railway rolling stock. Norms and determination methods
GOST 32320-2013: Anti-theft protection technical means and systems. General requirements and test methods
GOST 32410-2013: Emergency crash-systems railway rolling stock for passenger transportations. Technical requirements and methods of control
GOST 33105-2014: Electric generating sets with internal combustion engines. General specifications
GOST 33115-2014: Electric generating plants with diesel and gas internal combustion engines. General specification
GOST 33116-2014: Generating sets driven by gasoline internal combustion engines. General specifications
GOST 33257-2015: Pipeline valves. Methods of control and testing
GOST 33330-2015: Railway rolling stock driver's (operator's) armchair. Specifications
GOST 33435-2015: Control, monitoring and safety means of railway rolling stock. Safety requirements and control methods
GOST 33436.3-2-2015: Electromagnetic compatibility of technical equipment. Railway systems end equipment. Part 3-2. Railway rolling stock. Apparatus and equipment. Specifications and test methods
GOST 33436.4-1-2015: Electromagnetic compatibility of technical equipment. Systems and equipment of railway transport. Part 4-1. Devices and equipment of railway automatics and telemechanics. Requirements and testing methods
GOST 33463.6-2016: Life support systems on railway rolling stock. Part 6. Methods of hygienic assessment of the water supply system
GOST 33477-2015: System of development and launching into manufacture. Railway infrastructure equipment. Procedure of development, launching into manufacture and tolerance for use
GOST 33661-2015: Protecting constructions of the railway rolling stock premises. Test methods for determining the thermal technical indicators
GOST 33749-2016: Hydraulic clampers for railway rolling stock. General specifications
GOST 33797-2016: Cross beams of rigid portals for overhead contact line of railway transport. General specifications
GOST 33852-2016: Pipeline valves. Knife gate valves for trunk pipelines. General specifications
GOST 33939-2016: Cast details for freight wagons’ bogies. Methods of durability testing. Part 1. Side frame
GOST 34029-2016: Pipeline accessories. Check fittings for main oil pipelines and oil product pipelines. General specifications
GOST 34069-2017: Gas supply system. Main pipeline gas transportation. Mobile compressor unit. Control and testing
GOST 34077-2017: Hydrodynamic transmission for the railway rolling stock. Specifications
GOST 34204-2017: Surge suppressors are non-linear for the railway traction network. General technical conditions
GOST 34437-2018: Pipe fittings. Methods of experimental determination of hydraulic and cavitation characteristics
GOST 34450-2018: Details and assembly units of coupling and automatic coupling devices of railway rolling stock. Test methods
GOST 34451-2018: Motor car rolling stock. The method of dynamic strength tests
GOST 4835-2013: Wheelsets for freight and passenger car. Technical specifications
GOST 7328-2001: Weights. General specifications
GOST 7370-2015: Railway frogs. Specifications
GOST 7409-2018: Freight cars. Requirements to paint coatings and corrosion protection and methods of their control
GOST 7502-98: Measuring metal tapes. Specifications
GOST 8.259-2004: State system for ensuring the uniformity of measurements. Electrical induction active and reactive energy meters. Methods of verification
GOST 8.584-2004: State system for ensuring the uniformity of measurements. Alternating current static meters for active energy. Methods of verification
GOST 9.906-83: Unified system of corrosion and ageing protection. Test climatic stations. General requirements
GOST 9356-75: Rubber hoses for gas welding and metal cutting. Specifications
GOST R 12.4.186-2012: Occupational safety standards system. Respiratory individual protective devices. Closed-circuit breathing apparatus compressed air type. Technical requirements. Test methods. Marking. Simples selection rules
GOST R 12.4.230.2-2007: Occupational safety standards system. Personal eye protection. Optical and non-optical parameters test methods
GOST R 12.4.254-2010: Occupational safety standards system. Personal eye-protection. Filters and eye-protection against laser radiation. General technical requirements and test methods
GOST R 12.4.273-2012: Occupational safety standards system. Respiratory protective devices. Self-contained open-circuit compressed air supply apparatus completed with face mask or mouthpiece (escape breathing apparatus). Technical requirements. Test methods. Marking
GOST R 12.4.274-2012: Occupational safety standards system. Self-contained open-circuit compressed air breathing apparatus incorporating a hood for escape. Requirements, testing, marking
GOST R 12.4.275-2012: Occupational safety standards system. Respiratory protective devices. Powered atmospheric air supply hose apparatus with helmet. Technical requirements. Test methods. Marking
GOST R 12.4.276-1-2012: Occupational safety standards system. Respiratory protective devices. Compressed air line supply breathing apparatus. Part 1. Apparatus with a full face mask. Technical requirements. Test methods. Marking
GOST R 12.4.276-2-2012: Occupational safety standards system. Respiratory protective devices. Compressed air line supply breathing apparatus. Part 2. Apparatus with half mask at positive pressure. Requirements. Test methods. Marking
GOST R 12.4.277-2012: Occupational safety standards system. Respiratory protective devices. Respiratory lung-governed protective device for escape with compressed air, half mask and positive pressure. Technical requirements. Test methods. Marking
GOST R 12.4.278-2012: Occupational safety standards system. Respiratory protective devices. Self-contained open-circuit compressed air breathing apparatus with half mask, designed to be used with positive pressure only. Technical requirements. Test methods. Marking
GOST R 18.12.01-2015: Technology of the aviation fuelling. Functional and technological parameters of airfield fuelling tankers (tankers). Customer requirements
GOST R 22.1.14-2013: Safety in emergencies. Information-computational complexes of Structured system for monitoring and control of building/construction engineering equipment. Technical requirements. Test methods
GOST R 22.9.08-2005: Safety in emergencies. Dropping rescue parachute systems. Classification. General technical requirements
GOST R 22.9.10-2006: Safety in emergencies. Rescue descending devices. Classification. General technical requirements
GOST R 22.9.13-2014: Safety in emergencies. Technical means of radiation control. Test methods
GOST R 22.9.15-2014: Safety in emergencies. Technical means of chemical detection. Test methods
GOST R 22.9.29-2015: Safety in emergencies. Emergency and rescue vehicles. Test methods
GOST R 50.05.01-2018: Conformity assessment for the nuclear power use nuclear energy. Conformity assessment in the form of examination. Unified procedures. Leak tightness examination by gas and liquid methods
GOST R 50.05.12-2018: Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of control. Monitoring radiation embrittlement of the reactor vessel
GOST R 50009-2000: Electromagnetic compatibility of technical equipment. Components of intruder alarm systems. Requirement and test methods
GOST R 50656-2001: Electromagnetic compatibility of technical equipment. Technical equipment for railway control systems. Requirements and test methods
GOST R 50659-2012: Microwave Doppler detectors for use in buildings and open areas. General requirements and test methods
GOST R 50775-95: Alarm systems. Part 1. General requirements. Section 1. General
GOST R 50940-96: Electroshock batons. General specifications
GOST R 51053-2012: Locks high security. Requirements and tests for according to their resistance to unauthorized opening
GOST R 51101-2012: Metalworking and woodworking machines. Testing methods of compliance with safety requirements
GOST R 51113-97: Equipment for bank protection. Requirements for resistance to burglary and test methods
GOST R 51241-2008: Access control units and systems. Classification. General technical requirements. Test methods
GOST R 51241-98: Access control systems and units. Classification. General requirements. Methods of tests
GOST R 51317.3.2-99: Electromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current < 16 A per phase). Limits and test methods
GOST R 51317.3.3-99: Electromagnetic compatibility of technical equipment. Voltage fluctuation and flicker impressed on low-voltage supply systems by equipment with rated current <=16 A. Limits and test methods
GOST R 51317.4.11-2007: Electromagnetic compatibility of technical equipment. Voltage dips, short interruptions and voltage variations immunity. Requirements and test methods
GOST R 51317.4.11-99: Electromagnetic compatibility of technical equipment. Immunity to dynamic changes of power supply voltage. Requirements and test methods
GOST R 51317.4.12-99: Electromagnetic compatibility of technical equipment. Oscillatory waves immunity. Requirements and test methods
GOST R 51317.4.14-2000: Electromagnetic compatibility of technical equipment. Immunity to power voltage fluctuations. Requirements and test methods
GOST R 51317.4.16-2000: Electromagnetic compatibility of technical equipment. Immunity to conducted disturbances in the frequency range 0 Hz to 150 kHz. Requirement and test methods
GOST R 51317.4.17-2000: Electromagnetic compatibility of technical equipment. Immunity to d.c. power voltage ripples. Requirements and test methods
GOST R 51317.4.28-2000: Electromagnetic compatibility of technical equipment. Immunity to variation of power frequency. Requirements and test methods
GOST R 51317.4.2-99: Electromagnetic compatibility of technical equipment. Immunity to electrostatic discharge. Requirements and test methods
GOST R 51317.4.34-2007: Electromagnetic compatibility of technical equipment. Voltage dips, short interruptions and voltage variations immunity for equipment with input current more than 16 A per phase. Requirements and test methods
GOST R 51317.4.4-2007: Electromagnetic compatibility of technical equipment. Immunity to nanosecond impulsive disturbance. Requirements and test methods
GOST R 51317.4.4-99: Electromagnetic compatibility of technical equipment. Immunity to electrical fast transient/burst. Requirements and test methods
GOST R 51317.4.5-99: Electromagnetic compatibility of technical equipment. Microsecond high energy pulse disturbance immunity. Requirements and test methods
GOST R 51318.14.1-99: Electromagnetic compatibility of technical equipment. Radio disturbance from household appliances, electric tools and similar apparatus. Limits and test methods
GOST R 51318.15-99: Electromagnetic compatibility of technical equipment. Radio disturbance from electrical lighting and similar equipment. Limits and test methods
GOST R 51318.16.1.3-2007: Electromagnetic compatibility of technical equipment. Specification for radio disturbance and immunity measuring apparatus and methods. Part 1-3. Radio disturbance and immunity measuring apparatus. Disturbance power measuring apparatus
GOST R 51320-99: Electromagnetic compatibility of technical equipment. Man-made radio disturbance. Test methods for technical equipment which are man-made radio disturbance sources
GOST R 51365-2009: Petroleum and natural gas industries. Drilling and production equipment. Wellhead and Christmas tree equipment. General specifications
GOST R 51515-99: Electromagnetic compatibility of technical equipment. Immunity of sound and television broadcast receivers and associated equipment to electromagnetic disturbances. Requirements and test methods
GOST R 51516-99: Electromagnetic compatibility of technical equipment. Immunity of measuring relays and protection equipment to fast transient disturbance. Requirement and test methods
GOST R 51525-99: Electromagnetic compatibility of technical equipment. Immunity of measuring relays and protection equipment to electrostatic discharges. Requirement and test methods
GOST R 51544-2000: Hydraulically operated portable emergency and rescue tools. Spools with hydraulic lines. Basic parameters and dimensions. Methods of testing and control
GOST R 51546-2000: Hydraulically operated portable emergency and rescue tools. Spreader. Basic parameters and dimensions. Methods of testing and control
GOST R 51558-2000: Television systems of security. General technical requirements and test methods
GOST R 51558-2008: Security television means and systems. Classification. General technical requirements. Test methods
GOST R 51558-2014: Systems and components of Video surveillance for security applications. Classification. General requirements. Test procedures
GOST R 51635-2000: Nuclear material radiation monitors. General specifications
GOST R 51667-2000: Brushes for electrical machines. Methods for determination of the commutator characteristics
GOST R 51672-2000: Metrological ensuring of product testing for the assurance of conformity. General principles
GOST R 51685-2013: Railway rails. General specifications.
GOST R 51707-2001: Electrostatic precipitators. Safety requirement and methods of testing
GOST R 51712-2001: Indicator tubes. General specifications
GOST R 51759-2001: Hydrodynamic transmission for the railway rolling stock. General specifications
GOST R 51760-2001: Polymeric consumers packagings. General specifications
GOST R 51827-2001: Packagings. Leakproofness and hydraulic pressure testing methods
GOST R 51838-2012: Safety of machinery. Electrical equipment for industrial machines. Test methods
GOST R 51855-2001: Electromagnetic compatibility of technical equipment. Angle modulated personal use radio equipment operating in frequency band 26965 kHz - 27860 kHz. Requirements and test methods
GOST R 51856-2001: Electromagnetic compatibility of technical equipment. Short range devices operating on frequencies between 3 kHz and 400 GHz. Requirements and test methods
GOST R 51857-2001: Electromagnetic compatibility of technical equipment. On-site paging equipment. Requirements and test methods
GOST R 51864-2002: Packagings. Testing methods of handle fastening strength
GOST R 51903-2002: Fixed high frequency transmitters for radio communication. Basic parameters, technical requirements and methods of measurements
GOST R 51918-2002: The equipment for care of coordinates through the vertical mine. General technical requirements and test methods
GOST R 51945-2002: Aspirators. General specifications
GOST R 52016-2003: Point-to-point radio communication MF-HF receivers. Parameters, general technical requirements and methods of measuring
GOST R 52026-2003: Forestry machinery. Petrol power chain-saws, bush-cutters and grass-trimmers. Methods of measuring the technical data of internal-combustion engines
GOST R 52079-2003: Steel welded pipes for trunk gas pipelines, oil pipelines and oil products pipelines. Specifications
GOST R 52118-2003: Reference materials of nuclear materials for radiation monitors. General technical requirements and testing methods
GOST R 52128-2003: Bitumen road emulsions. Specifications
GOST R 52136-2003: Electrical apparatus for the detection and measurement of flammable gases. Part 1. General requirements and test methods
GOST R 52152-2003: Long wall powered roof chocks. Basic parameters. General technical requirements. Test methods
GOST R 52220-2004: Monorail transport system electrical rolling stock. General safety requirements
GOST R 52232-2004: Light rail cars. General specifications
GOST R 52278-2004: Monorail transport system rolling stock. Carrying out the repair. General specifications
GOST R 52284-2004: Fire aerial ladders. General technical requirements. Test methods
GOST R 52350.29.1-2010: Explosive atmospheres. Part 29-1. Gas detectors. General technical requirements and test methods for the detectors for flammable gases
GOST R 52365-2005: Seals. Requirements for test methods of locking system reliability and resistance to unauthorized access
GOST R 52392-2005: Brake cylinders for railway rolling stock. General specifications
GOST R 52431-2005: Vehicles. Apparatus of braking systems with a hydraulic actuating of brakes. Technical requirements and test methods
GOST R 52435-2005: Technical means of intruder alarm systems. Classification. General technical requirements and test methods
GOST R 52435-2015: Alarm intruder technical means. Classification. General technical requirements and test methods
GOST R 52436-2005: Control equipment of intruder and intruder-fire alarm systems. Classification. General technical requirements and test methods
GOST R 52452-2005: Vehicles. Pipes and hoses of hydraulic and pneumatic transmissions of brakes. Technical requirements and test methods
GOST R 52650-2006: Combined microwave infra-red intrusion detectors for rooms. General technical requirements and test methods
GOST R 52651-2006: Microwave intrusion detectors for perimeters. General technical requirements and test methods
GOST R 52745-2007: Complex quality control system. Quality control for materials and semi-finished products used in the process of production of articles of aviation, space and defence equipment and double application equipment at enterprises-suppliers. General requirements
GOST R 52764-2007: Metallic materials. Method of bend test for sheets and strips 3 mm thick and less
GOST R 52847-2007: Vehicles. Brake gears. Technical requirements and machine testing methods
GOST R 52849-2007: Vehicles. Chambers of pneumatic brake controls. Technical requirements and test methods
GOST R 52850-2007: Vehicles. Single-stage compressed air pumps. Technical requirements and test methods
GOST R 52906-2008: Equipment of the aviation fuelling system. General technical requirements
GOST R 52909-2008: Targets for stand shooting and sporting. General specifications
GOST R 52921-2008: Medical maximum glass thermometers. General specifications
GOST R 52931-2008: Instruments for process monitoring and control. General specifications
GOST R 52933-2008: Capacitance intrusion detectors for rooms. General technical requirements and test methods
GOST R 52998-2008: Copper concentrate. Specifications
GOST R 53009-2008: Environmental control and monitoring systems. General guidelines on creation, adoption and ensuring functioning of the chemical weapons destruction
GOST R 53051-2008: Machinery and tools for digging out and selection of seedlings and saplings in nursery forests. Test methods
GOST R 53052-2008: Machinery and tools for preparation of fillings for making foresting. Test methods
GOST R 53115-2008: Information protection. Conformance testing of technical information processing facilities to unauthorized access protection requirements. Methods and techniques
GOST R 53174-2008: Electric generating plants with diesel and gas internal combustion engines. General specifications
GOST R 53175-2008: Electric generating plants with gasoline internal combustion engines. General specifications
GOST R 53178-2008: Electric generating plants with gasoline, diesel and gas internal combustion engines. Test methods
GOST R 53328-2009: Fire fighting technics. Fire extinguishing trucks. General technical requirements. Test methods
GOST R 53329-2009: Fire elevators. General technical requirements. Test methods
GOST R 53330-2009: Fire foam elevators. General technical requirements. Test methods
GOST R 53374-2009: Liquid - propellant rocket engines. General technical requirements for production and quality inspection during supply for use
GOST R 53402-2009: Pipeline valves. Methods of control and testing
GOST R 53418-2009: Seals. Order of the inspection of seals in operating condition
GOST R 53424-2009: Mechanical seals for freight containers. General technical requirements
GOST R 53424-2018: Mechanical seals for freight containers. General technical requirements
GOST R 53466-2009: Optics and optical equipment. Medical thermographs. General technical requirements. Methods of measuring the major parameters
GOST R 53543-2009: Aircraft and helicopter ground support equipment. General technical requirements
GOST R 53559-2009: Vehicles. Forced ignitions engine fuel filters and filter elements. General technical requirements
GOST R 53560-2009: Intruder alarm systems. Power supply units. Classification. General technical requirements. Test methods
GOST R 53616-2009: Requirements for performance of chambers for industrial products environmental endurance tests. Certification methods of chambers (without load) for humidity endurance test chambers
GOST R 53618-2009: Requirements for performance of chambers for industrial products environments endurance tests. Certification methods of chambers (without load) for temperature resistance test
GOST R 53640-2009: Motor vehicles. Diesel fuel filters. General technical requirements
GOST R 53649-2009: Shearers. General technical requirements. Test methods
GOST R 53671-2009: Pipeline valves. Swing and lift check valves. General specifications
GOST R 53672-2009: Pipeline valves. General safety requirements
GOST R 53673-2009: Pipeline valves. Butterfly wicket valves. General specifications
GOST R 53680-2009: Petroleum and natural gas industries. Well service equipment. General technical requirements
GOST R 53683-2009: Petroleum and natural gas industries. Drilling and production equipment. Hoisting equipment. General technical rudiments
GOST R 53702-2009: Alarms guarding surface vibration detectors for blocking of structures and safes. General technical requirements and test methods
GOST R 53703-2009: Tracking systems and anti-theft systems for use in security applications for vehicle. General technical requirements and test methods
GOST R 53705-2009: Complex security systems. Stationary metal detectors for apartments. General technical requirements. Test methods
GOST R 53787-2010: Sealing devices. Test methods of rod type power sealing devices resistance to unauthorized access. General requirements
GOST R 53805-2010: Motor vehicles. Manual slack adjusters of drum brakes for trucks and buses. Technical requirements and test methods
GOST R 53806-2010: Vehicles. Metallic cables of parking brakes. Technical requirements and test methods
GOST R 53807-2010: Vehicles. Hydraulic cylinder and pumps hydraulic mechanisms tilting cab. Technical requirements and test methods
GOST R 53808-2010: Automobile engines. Camshafts. Technical requirements and test methods
GOST R 53809-2010: Automobile engines. Cylinder liners. Technical requirements and test methods
GOST R 53810-2010: Automobile engines. Valves. Technical requirements and test methods
GOST R 53811-2010: Automobile engines. Valve springs. Technical requirements and test methods
GOST R 53812-2010: Automobile engines. Valve tappets. Technical requirements and test methods
GOST R 53813-2010: Automobile engines. Connecting rods. Technical requirements and test methods
GOST R 53814-2010: Vehicles for transportation of money takings and valuable loads. Technical requirements and test methods
GOST R 53815-2010: Cars. Ball type trailer coupling equipment. Technical requirements and test methods
GOST R 53816-2010: Vehicles. Hydraulic telescopic shock absorbers. Technical requirements and test methods
GOST R 53817-2010: Vehicles. Telescopic single acting hydraulic cylinders. Technical requirements and test methods
GOST R 53818-2010: Vehicles. Wheel balancing weights. Technical requirements and test methods
GOST R 53820-2010: Motor vehicles. Details of sealing and protective. Technical requirements and test methods
GOST R 53821-2010: Vehicles. Diaphragms and plate membranes. Technical requirements and test methods
GOST R 53822-2010: Vehicles. Hydraulic jacks. Technical requirements and test methods
GOST R 53823-2010: Vehicles. Additional antitheft devices. Technical requirements and test methods
GOST R 53824-2010: Vehicles. Not-folding wheels. Technical requirements and test methods
GOST R 53825-2010: Vehicles. Pneumatic springs. Technical requirements and test methods
GOST R 53826-2010: Vehicles. High-voltage wires. Technical requirements and test methods
GOST R 53827-2010: Vehicles. Cylindrical screw springs, torsions, stabilizers suspension. Technical requirements and test methods
GOST R 53828-2010: Vehicles. System of microclimate. Technical requirements and test methods
GOST R 53829-2010: Vehicles. Electrical starters. Technical requirements and test methods
GOST R 53830-2010: Vehicles. Hubs and the half-wheels. Technical requirements and test methods
GOST R 53832-2010: Vehicles. Heat exchangers and thermostats. Technical requirements and test methods
GOST R 53833-2010: Vehicles. Independent warming-heating units. Technical requirements and test methods
GOST R 53834-2010: Vehicles. Hoses for hydraulic systems. Technical requirements and test methods
GOST R 53835-2010: Vehicles. Elements of the steering actuator and guide vane suspension. Technical requirements and test methods
GOST R 53836-2010: Automobile engines. Thin-walled liners of main and connecting rod bearings. Technical requirements and test methods
GOST R 53839-2010: Automobile engines. Liquid pumps of cooling systems. Technical requirements and test methods
GOST R 53840-2010: Automobile engines. Startability. Test methods
GOST R 53841-2010: Automobile engines. Drive belts. Technical requirements and test methods
GOST R 53842-2010: Automobile engines. Spark plugs. Technical requirements and test methods
GOST R 53843-2010: Engines of vehicles. Piston rings. Technical requirements and test methods
GOST R 53844-2010: Vehicles. Fine filters of oil for automobile, tractor and combine engines. Technical requirements and test methods
GOST R 53888-2010: Sealing devices. Test methods of indicative seals resistance to unauthorized access. General requirements
GOST R 53950-2010: Ophthalmic optics. Uncut finished spectacle lenses. General specifications
GOST R 54022-2010: Global navigation satellite systems. Flying vehicles trajectory measurement system based on satellite navigation systems. General technical requirements and test methods
GOST R 54082-2010: Requirements for performance of chambers for industrial products environmental endurance tests. Data processing methods for chamber certification (calibration)
GOST R 54083-2010: General requirements for performance of chambers for industrial products environments endurance tests. Certification methods for chambers (with load) for temperature resistance test
GOST R 54093-2010: Wheel for railway stock. Methods of residual stress determination
GOST R 54126-2010: Warning devices for intruder alarm systems. Classification. General technical requirements and test methods
GOST R 54129-2010: Emission of the exhaust gas pollutants by the main-line and shunting for the special-purpose rolling stock. Norms and determination methods
GOST R 54174-2010: Sealed insulating glass units. Rules and methods of products quality assurance
GOST R 54302-2011: Sealing devices. Test methods of security seals resistance to environmental climatic and mechanical factors occurring in operation
GOST R 54418.2-2014: Renewable power engineering. Wind power engineering. Wind turbines. Part 2. Design requirements for small wind turbines
GOST R 54436-2011: Requirements for performance of chambers for industrial products environments endurance tests. Certification methods for chambers (with load) for humidity endurance cyclic tests
GOST R 54437-2011: Requirements for performance of chambers for industrial products environments endurance tests. Certification methods for chambers (without load) for resistance to air pressure tests
GOST R 54442-2011: Heating boilers. Part 3. Gas-fired central heating boilers. Assembly comprising boiler body and a forced draught burner. Testing of heat engineering
GOST R 54455-2011: Alarm systems. Environmental test methods
GOST R 54477-2011: Soils. Methods for laboratory determination of soil deformation characteristics in road construction
GOST R 54501-2011: Complex quality control system. Control of technological processes of manufacturing materials and semi-finished product at enterprises-suppliers. General requirements
GOST R 54618-2011: Global navigation satellite system. Road accident emergency response system. Compliance test methods of in-vehicle emergency call system/device for electromagnetic compatibility, environmental and mechanical resistance requirements
GOST R 54747-2011: Ferro-concrete cross ties for railways for 1520 mm gauge railways. General specifications
GOST R 54775-2011: Powered support pumping stations. General technical requirements. Test methods
GOST R 54798-2011: Control, monitoring and safety means of railway rolling stock. Safety requirements and control methods
GOST R 54811-2011: Electromobiles. Test methods for active and passive safety
GOST R 54812-2011: Auxiliary and emergency marine diesel-generator sets. Types and basic parameters. General technical requirements
GOST R 54831-2011: Control access systems. Controlled barrier units. General technical requirements. Test methods
GOST R 54893-2012: Passenger cars on locomotive traction and motor-cars. Lacquer and antidischarge coating reguirements.
GOST R 54962-2012: Railway rolling stock driver’s (operator's) armchair. Specifications
GOST R 55001-2012: General requirements for performance of chambers for industrial products environments endurance tests. Certification methods for chambers (without load) for salt spray tests
GOST R 55006-2012: Stationary diesel and gas fuelled power plants with internal combustion engines. General specifications
GOST R 55018-2012: Pipeline valves for objects of energetics. General specifications
GOST R 55020-2012: Pipeline valves. Knife gate valves for trunk pipelines. General specifications
GOST R 55023-2012: Pipeline valves. Home regulators of pressure. General specifications
GOST R 55048-2012: Quality management systems. Particular requirements for the application of GOST R ISO 9001-2008 in construction
GOST R 55050-2012: Railway rolling stock. Permissible exposure norms to the railway track and test methods.
GOST R 55150-2012: Combined passive infrared ultrasonic intrusion detectors for use in buildings. General technical requirements and test methods
GOST R 55151-2012: Mining equipment. Cable laying machines. General technical requirements and test methods
GOST R 55152-2012: Mining equipment. Mobile armoured face conveyors. General technical requirements and test methods
GOST R 55160-2012: Mining equipment. Mine face conveyers jacks. General technical requirements and test methods
GOST R 55161-2012: Mining equipment. Borers mining hand pneumatic. Safety requirements and methods of testing
GOST R 55167-2012: Surge arresters for power supply systems of electrified railways. General specifications
GOST R 55176.2-2012: Electromagnetic compatibility of technical equipment. Railway systems and equipment. Part 2. Emission of the whole railway system to the outside world. Requirements and test methods
GOST R 55176.3.1-2012: Electromagnetic compatibility of technical equipment. Railway systems and equipment. Part 3-1. Rolling stock. Requirements and test methods
GOST R 55176.3.2-2012: Electromagnetic compatibility of technical equipment. Railway systems end equipment. Part 3-2. Rolling stock. Apparatus and equipment. Specifications and test methods
GOST R 55176.4.1-2012: Electromagnetic compatibility of technical equipment. Systems and equipment of railway transport. Part 4-1. Devices and equipment of railway automatics and telemechanics. Requirements and testing methods
GOST R 55184-2012: Hydraulic clampers for railway rolling stock. General specifications
GOST R 55185-2012: Parts and assembly units of coupler and automatic coupler devices of railway rolling stock. Test methods
GOST R 55186-2012: Cross beams of rigid portals for overhead contact line of railway transport. General specifications
GOST R 55369-2012: Railway automatics and telemechanics equipment. General technical requirements
GOST R 55435-2013: Oil and oil products trunk pipeline transportation. Operation and maintenance. General principles
GOST R 55496-2013: Motor railway rolling stock. Methodology of dynamic-strength tests
GOST R 55498-2013: Rolled wheel centres for railway rolling stock. Technical specifications
GOST R 55508-2013: Pipeline valves. Technique of the experimental definitions hydraulic and cavitation characteristics
GOST R 55514-2013: Locomotives. Dynamic and strength testing procedures
GOST R 55520-2013: Passenger cars. Elastic semi cardan (clutch) transmission shafts. Technical requirements and test methods
GOST R 55521-2013: Automobile engines. Pumps lubrication systems. Technical requirements and test methods
GOST R 55522-2013: Vehicles. Slack adjusters of drum brakes for vehicles and buses with automatic adjustment. Technical requirements and test methods
GOST R 55527-2013: Protecting constructions of the railway rolling stock premises. Test methods for determining the thermal technical indicators
GOST R 55532-2013: Global navigation satellite system. Road accident emergency response system. Test methods of in-vehicle emergency call system crash detection feature
GOST R 55533-2013: Global Navigation Satellite System. Road accident emergency response system. Test methods for wireless communication module of in-vehicle emergency call system
GOST R 55534-2013: Global navigation satellite system. Road accident emergency response system. Test methods for navigation module of in-vehicle emergency call system
GOST R 55622-2013: Complex security systems. Hydraulic gun carriage trunks with Remote control. General technical requirements
GOST R 55623-2013: Armour clothes. Methods of testing
GOST R 55648-2013: Insulators for contact net of railways. General specifications
GOST R 55685-2013: Blister copper. Methods of analysis
GOST R 55705-2013: Lighting devices with the LED light sources. General specifications
GOST R 55732-2013: Mining equipment. Support of mine working. Polymer net for the guard mine working. Specifications
GOST R 55735-2013: Mining equipment. High pressure mine rubber hoses with metallic tapings and metallic braidings with fitting. Safety requirements and test methods
GOST R 55753-2013: Complex quality control system. Electronic components. Requirements quality assurance and quality control
GOST R 55804-2013: Information and warning systems on train traffic and railway rolling stock approach. General requirements
GOST R 55821-2013: Bogies of passenger cars on locomotive traction. Specifications
GOST R 55847-2013: Air transport. Maintenance and repair system of the aircraft. Monitoring parameters of technological equipment. General principles
GOST R 55867-2013: Air transport. Metrological support on air transport. General principles
GOST R 55995-2014: Seat passenger railcar rolling stock and passenger cars with locomotive traction. General specifications
GOST R 56006-2014: Pipeline valves. Testing and acceptance on objects of the gas main pipelines before commissioning. General technical requirements
GOST R 56102.2-2015: Centralized security monitoring systems. Part 2. Subsystem for mounting at protected facility. General technical requirements and test methods
GOST R 56157-2014: Soil. Procedures (methods) of analysis of composition and properties of soil samples. General requirements for development
GOST R 56218-2014: The automobile vehicles working on compressed natural gas. Cryogenic power supply systems. Technical requirements and test methods
GOST R 56289-2014: Explosion venting constructions for buildings. Testing methods at emergency internal explosions
GOST R 56363-2015: Global navigation satellite system. Satellite navigation equipment for mounting on wheeled vehicles. Methods of compliance testing with requirements for electrical safety, climatic and mechanical influences
GOST R 56466-2015: Space systems. Materials test methods. Method of determining the linear thermal expansion coefficient composites at high temperatures
GOST R 56514-2015: Strength standard for automated spacecraft
GOST R 56519-2015: Automatic spacecrafts. Thermal vacuum treatment. General requirements
GOST R 56648-2015: Electronic components for rocket and space technology. Input inspection and additional testing. General provisions
GOST R 56830-2015: Petroleum and natural gas industries. Electrical submersible pump units. General technical requirements
GOST R 56963-2016: Locomotives. Lacquer and antidischarge coating requirements and methods of their control
GOST R 57076-2016: Field test centers for the railway rolling stock and the infrastructure elements. Technical requirements
GOST R 57214-2016: Glazing products for railway rolling stock. General specification
GOST R 57367-2016: Acoustoelectronic products on surface acoustic waves. Identification marks. General specifications
GOST R 57393-2017: Microelectromechanical transducers of linear acceleration. Methods for measurement parameters
GOST R 57395-2017: Angle-to-digit converters. General requirements for measuring instruments, testing and monitoring of input and output parameters
GOST R 57501-2017: Maintenance of medical devices. Requirements for governmental purchases
GOST R 57557-2017: Hydroacoustic alarm intruder means and systems. General technical requirements and test methods
GOST R 57659-2017: The railway transport objects testing methods of prolongation operating cycle. Part 1. Power transformers and auto transformers for railway power substations, transform substations and power supply linear devices
GOST R 57671-2017: LED irradiators for greenhouses. General specifications
GOST R 57790-2017: Timber bearing structures. Methods of strength and deformability testing
GOST R 58006-2017: Counter of the number of opening for safes, value repository, wrapping doors. Technical requirements and test methods
GOST R 8.589-2001: State system for ensuring the uniformity of measurements. Control of nature environment soiling. Metrological ensuring. General principles
GOST R 8.632-2007: State system of ensuring the uniformity of measurements. Metrological ensuring of the chemical weapons destruction. Main principles
GOST R 8.637-2007: State system for ensuring the uniformity of measurements. Certified reference materials for metrological maintenance of pipeline non-destructive testing equipment. General requirements
GOST R 8.742-2011: State system for ensuring the uniformity of measurements. Measuring installations of 1-st class of moisture content in firm substances and materials. Verification procedure
GOST R 8.754-2011: State system for ensuring the uniformity of measurements. Analysers of oxygen dissolved in water. Verification procedure
GOST R 8.786-2012: State system for ensuring the uniformity of measurements. Fuel oil mass. Measurement procedure in horizontal storage tanks by indirect method of static measurements. General metrological requirements
GOST R 8.787-2012: State system for ensuring the uniformity of measurements. Mass of mazut. Measurement of the fuel oil mass in railway tanks. General metrological requirements
GOST R 8.871-2014: State system for ensuring the uniformity of measurements. In house reference materials, reference materials of the branches. The general requirements
GOST R 9.318-2013: Unified system of corrosion and ageing protection. Nanostructure non-metallic inorganic coatings formed by microarc oxidation on aluminium and its alloys. General requirements and methods of control
I 603-06: Quality Management System. Typical content of acts of work of certification commissions
ITS 22.1-2016: General principles of industrial environmental control and its metrological support
MI 2240-98: National Measurement Standards. Analysis of Measurement, Inspection, and Testing Practicies at Businesses, Organizations, and Associations. Work Execution Technique and Procedures
MI 2304-08: GSOEI. Metrological supervision carried out by the metrological services of legal entities. Main provisions
MI 2418-97: State system for ensuring uniformity of measurements. Classification and application of technical means for testing oil and petroleum products
MI 2427-97: Measurements Assessment of Status of Measurements in Test and Measurement Laboratories
MI 2500-98: National Measurement Standards. Basic Principles for Metrological Assurance for Small Businesses
MI 2647-2001: Recommendation. State system for ensuring uniformity of measurements. The procedure for accreditation of organizations for the right of attestation of test equipment used in the interests of defense and security
MI 2837-2003: Oil hand-over and acceptance points metrological and technical support
MI 2857-2004: GSE. Metrological support at the enterprises of the meat industry. Main provisions
MI 3240-2009: State system for ensuring uniformity of measurements. Fluid density converters flow. Method of verification
MI 3261-2010: State system for ensuring the uniformity of measurements. Means of measuring the concentration of dissolved oxygen in water. Methods of verification
MI 3301-2010: Recommendation. State system for ensuring uniformity of measurements. Oil product pipeline. Acceptance points of petroleum products. Metrological and technical support
MI 3342-11: Recommendation. GSE. Requirements for testing laboratories that monitor the quality of oil
MR 29FTs/2688-2003: Express method for assessing the toxicity of air samples by water-soluble components using cattle sperm as a test object
MU 1.2.3.0057-2009: Guidelines. Composition and scope of testing of special pipe fittings for nuclear power plants
MU 1.2.3.07.0057-2016: Composition and scope of tests of special pipeline valves and actuators for nuclear power plants. Methodical instructions
MU 1.2.3.07.0057-2018: Composition and scope of testing of special valves and actuators for nuclear power plants. Guidelines
MU 64-02-002-2002: Organization and procedure for the execution of metrological examination of regulatory documents
MUK 4.1.1481-03: Determination of the mass concentration of iodine in food products, food raw materials, food and dietary supplements by the voltammetric method
NB ZhT TsP 110-2003: Spring terminals of a flawless separate fastening ZhBR-65. Safety standards
NB ZhT TsP 142-2003: Covers with polymeric coating for insulating joints of railway rails. Safety standards
NPB 198-2001: Fire elevators, complete parts and accessories. Release from repair. General technical requirements. Test methods
ODM 218.4.033-2017: Guidelines for the creation of a system of pilot landfills on the existing network of federal roads for the introduction of new technologies and materials in the road sector in various climatic zones of the Russian Federation
ODM 218.8.006-2016: Lighting for highways. Classification. General requirements and test methods
OST 26.260.18-2004: Process modules for oil and gas industry. General technical specifications
OST 32.146-2000: Devices of railway automation, telemechanics and telecommunications. General specification requirements
OT 1.1.8.02.1177-2016: Quality assurance program in the development and manufacture of products supplied to nuclear power plants. Content and Development Requirements
P SSFZhT 45/ISO 9001-2003: The certification system on the federal railway transport of the Russian Federation. Quality Management System. Requirements
P SSFZhT 46-2001: The certification system for the federal railway transport. The order of development and certification of certification tests of railway equipment.
PNST 190-2017: Freight cars. Method of dynamic tests for impact on track with the use of strain-gauge-based wheel set
PNST 250-2017: Nanomaterials. Silver nanosuspension. General technical requirements and test methods
PR 32.199-2002: Testing system of rolling stock. Organization and procedure of performance tests of locomotives and motor-coach rolling stock
R 50.2.007-2001: State system for ensuring uniformity of measurements. Accreditation procedure for gaming machine test centers
R 50.2.030-2003: National Measurement Standards. Area of Application of Standard Specimens of the Composition and Properties of Substances and Materials Under the Jurisdiction of Government Metrological Monitoring and Inspection
R 50.2.033-2004: State system for ensuring uniformity of measurements. Reference electrodes for electrochemical measurements. Method of verification
R 50.2.034-2004: National Measurement Standards. Ion-Selective Electrodes for the Determination of Ion Activity (Concentration) in Aqueous Solutions. Verification Methods
R 50.2.035-2004: State system for ensuring uniformity of measurements. Glass electrodes, including combined ones, for determining the activity of hydrogen ions (pH) in aqueous solutions. Method of verification
R 50.2.036-2004: National Measurement Standards. pH Meters and Ion Meters. Verification Methods
R 50.2.045-2005: State system for ensuring the uniformity of measurements. Analysers of oxigen dissolved in water. Methods of verification
R 50.2.074-2010: State system for ensuring the uniformity of measurements. Requirements for the competence of legal persons and individual entrepreneurs, accredited for the works on certification of measurement procedures, used in analytical control
R 50.2.090-2013: State system for ensuring the uniformity of measurements. Quantitative chemical analysis procedures. General requirements for development, certification and application
R 50.2.097-2015: State system for ensuring the uniformity of measurements. Assessment of the state of activity measurement, calibration and testing laboratories to meet accreditation criteria in the area of traceability
R 50.4.004-2000: Accreditation of test labs for food products and raw material
R 52.08.696-2007: Comparators for calibrating hydrometric turntables. Program and methods of certification
R 52.14.648-2003: Recommendations. Metrological examination of regulatory and technical documentation
RD 153-00.0-006-99: Sectoral system for ensuring the uniformity of measurements in the fuel and energy complex. Metrological control and supervision in the fuel and energy complex
RD 52.08.319-2002: Guidelines. Calibration trays of type GR-19 and GR-19M. Program and methods of certification
RD EO 1.1.2.99.0867-2012: Methods for assessing the technical condition and residual life of building structures of nuclear power plants
RD RTM 26-07-33-99: Pipe fittings. Methods of experimental determination of cavitation characteristics
RMG 109-2011: State system for ensuring the uniformity of measurements. Oil. Sampling from the pipelines
RMG 89-2010: State system for ensuring the uniformity of measurements. Acceptance point of oil. Metrological and technical assurance
RMG 94-2009: State system for ensuring the uniformity of measurements. Test laboratories performing of the quality control of oil at acceptance operations. Basic requirements
SanPiN 2.2.4.1329-03: Requirements for Protection of Personnel Against the Effect of Pulsed Electromagnetic Fields
SO 153-34.48.519-2002: Rules for design, construction and operation of fiber-optic communication lines on overhead power lines with voltage of 0.4-35 kV
ST SSFZhT TM 151-2003: The wheels are seamless. Determination of the endurance limit of the disk. Typical Test Procedure
ST SSFZhT TM 152-2003: Finishing carriage axles. Definition of the endurance limit of the necks of the axes. Typical test method
ST SSFZhT TM 153-2003: Finished car axles. Determination of cyclic fracture toughness. Standard test procedure
ST SSFZhT TsE 136-2002: Telemechanics equipment traction substations. Typical certification test methods
ST SSFZhT TsT 046-99: Shaft cardan main drive diesel locomotives and diesel trains. Typical test method
ST SSFZhT TsT 049-99: Transmission hydraulic for diesel locomotives and diesel trains. Typical test method
ST SSFZhT TsT TsL TsV-137-2002: Rolling stock of mainline railways. Axle box rolling bearings. Standard testing method.
ST SSFZhT TsUO 082-2000: Rolling stock and special railway rolling stock fire detection and fire extinguishing sys-tems. Standard test methods
ST TsKBA 029-2006: Pipe fittings. Methods of experimental determination of hydraulic and cavitation characteristics
ST TsKBA 080-2009: Pipe fittings. Methods of testing for seismic resistance
ST TsKBA 080-2015: Pipe fittings. Methods of testing for seismic resistance
ST TsKBA 082-2009: Pipe fittings. Input control
ST TsKBA 114-2014: Valves of pipeline all-ship. The procedure for the approval of valves with expired shelf life
STB GOST R 51827-2002: Containers. Test methods for leak tightness and hydraulic pressure
STB GOST R 51864-2005: Containers. Test methods of handles attachment strength
VRD 39-1.10-029-2001: Standard programs and methods for conducting preliminary, acceptance and operational tests of electrical units and power plants with a piston and gas turbine drive
Customers Who Viewed This Item Also Viewed:
|
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.