GOST 17166-71
ГОСТ 17166-71
|
|
Accessory tool for metal-cutting machines. General technical requirements
Инструмент вспомогательный к металлорежущим станкам. Общие технические требования
Status: Effective - Introduced for the first time
The standard applies to auxiliary tools for machine tools, and establishes uniform technical standards and requirements. The standard does not cover the details of general use, and does not regulate the methods and methods of control of the auxiliary tool.
Стандарт распространяется на вспомогательный инструмент к металлорежущим станкам, и устанавливает единые технические нормы и требования. Стандарт не распространяется на детали общего применения, а также не регламентирует способы и методы контроля вспомогательного инструмента.
Choose Language:
Format: Electronic (pdf/doc)
Approved: State Committee of Standards of the Council of Ministers of the USSR,
9/8/1971
SKU: RUSS69244
The Product is Contained in the Following Classifiers:
ISO classifier »
25 MECHANICAL ENGINEERING »
25.060 Machine Systems »
25.060.01 Machine systems in general »
National standards »
25 MECHANICAL ENGINEERING »
25.060 Machine Systems »
25.060.01 Machine systems in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G2 Industrial tools and accessories »
G27 Fixtures and auxiliary tools »
The Document References:
GOST 10354-82: Polyethylene film Specifications
GOST 1412-85: Flakish graphite cast iron
GOST 1435-99: Bars, strips and reels of tool unalloyed steel. General specifications
GOST 15945-82: Arbor and spindle tapers 7:24. Dimensions
GOST 2228-81: Paper for bags
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 2848-75: Tapers of tools. Tolerances. Methods and means of control
GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications
GOST 8273-75: Packing paper
GOST 8479-70: Structural carbon and alloy steel forgings
GOST 8828-89: Base paper and two-layer waterproof packaging paper
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations
GOST 9.306-85: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Symbols
GOST 977-88: Steel castings. General specifications
The Document is Referenced By:
GOST 13044-83: Arbouns for shell multiflute drills and reamers. Construction and dimensions
GOST 13044-85: Arbouns for shell multiflute drills and reamers. Construction and dimensions
GOST 13598-85: Adapters for mounting taper-shanked tools. Design and dimensions
GOST 13599-78: Adapters with slot for tool cottering. Design and dimensions
GOST 13785-68: Arbors with tapered shank 7:24 and face keys for shell face cutters. Design and dimensions
GOST 13786-68: Arbors with tapered 7:24 and longitudinal key for shell cutters. Design and dimensions
GOST 13787-68: Arbors with tapered shank and longitudinal key without lug for shall cutters. Design and dimensions
GOST 13788-68: Arbors with tapered shank and face keys without lug for shell face cutters. Design and dimensions
GOST 13789-68: Adapters for end cutters. With tapered shank. Design and dimensions
GOST 13790-68: Tapered adapters 7:24 for end cutters with tapered shank. Design and dimensions
GOST 13791-68: Tapered adapters 7:24 with end slot for cutters arbors. Design and dimensions
GOST 13792-68: Adapters with pulling-off nut for end cutters with tapered shank. Design and dimensions
GOST 13793-68: Adapters without lug for lathes for tools with tapered shank. Design and dimensions
GOST 14077-83: Chuckes for quick-changing tool. Design and dimensions
GOST 15069-75: Tool holders with straight guide and Morse taper shank for horizontal milling machines. Design and dimensions
GOST 15070-75: Tool holders with supporting bush and Morse taper shank for horizontal milling machines. Design and dimensions
GOST 15936-70: Quick-changing stiff adapters for taps. Design and dimensions
GOST 17179-71: Turret lathe with cylindrical collets. Design and dimensions
GOST 17180-71: Turret lathe collets with eccentrically positioned cylindrical hole. Design and dimensions
GOST 17182-71: Turret lathe collets with eccentrically positioned hole for double nests. Design and dimensions
GOST 17183-71: Turret lathe collets with displaced cylindrical hole for double nests. Design and dimensions
GOST 17184-71: Turret lathe collets with rib and concentrically positioned cylindrical hole. Design and dimensions
GOST 17185-71: Turret lathe collets with rib and eccentrically positioned cylindrical hole. Design and dimensions
GOST 17200-71: Collette chucks for turret lathes. Design
GOST 17201-71: Gripping collets for cutting tools with cylindrical shank. Design
GOST 18069-72: Clamping bushings with a slider for tools with a cylindrical tail. Design and dimensions
GOST 18070-72: Clamping bushings with a shoulder for tools with a cylindrical tail. Design and dimensions
GOST 18258-72: Adapters for centres. Design and dimensions
GOST 18259-72: Thrust centres with cone 1:10 and 1:7. Design and dimensions
GOST 18260-72: Thrust centres with screwed-off nut and cone 1:10 and 1:7. Design and dimensions
GOST 19171-73: Adjustable holders for angled fastening of cutter for turret lathes. Design and dimensions
GOST 19913-74: Holders with a cylindrical shank for right-angle holding of a tool for turret-lathes. Design and dimensions
GOST 19914-74: Holders with a cylindrical shank for angled holding of a tool for turn-lathes. Design and dimensions
GOST 19915-74: Holders with a cylindrical shank for cutting-off bit tools for turret-lathes. Design and dimensions
GOST 20505-75: Driver chucks for pivoting arbours for turret lathes. Design and dimensions
GOST 20506-75: Pivoting arbours for shell reamers for turret lathes. Design and dimensions
GOST 20508-75: Pivoting arbours for reamers with a cylindrical shank for turret lathes. Design and dimensions
GOST 21187-75: Support holders for tangential cutters of automatic turret lathes. Design and dimensions
GOST 21188-75: Support holders for direct clamping of lathe cutters. Design and dimensions
GOST 21189-75: Prismatic supports for automatic lathe holders. Design and dimensions
GOST 21190-75: Roll supports for automatic turret lathe holders. Design and dimensions
GOST 21200-75: Support holders for tangential cutters of turret lathes. Design and dimensions
GOST 21201-75: Support holders for skew clamping of turret lathe cutters. Design and dimensions
GOST 21233-75: Floating arbors for shell reamers with 7:24 taper shank for drilling and boring machines. Design and dimensions
GOST 21941-76: Die chucks for turret lathes. Design and dimensions
GOST 21942-76: Sleeves of die chucks for turret lathes. Design and dimensions
GOST 22393-77: Universal boring heads. Main dimensions
GOST 22627-77: Tapping chucks for turret-lathes. Design and dimensions
GOST 22628-77: Sockets for tapping chucks for turret-lathes. Design and dimensions
GOST 22629-77: Movable chasing chucks for automatic lathes. Design and dimensions
GOST 22630-77: Sockets for movable chasing chucks for automatic lathes. Design and dimensions
GOST 24644-81: Spindle noses and tool shanks of drilling, boring and milling machines. Dimensions. Technical requirements
GOST 26260-84: Shell counterbore arbors with removable guides. Design and dimensions
GOST 26539-85: Collet chucks with taper 7:24 for chucking cylinder shank tool basic dimensions
|
Customers Who Viewed This Item Also Viewed:
 |
Construction in seismic regions
Language: English |
2015 Kazakhstan PUE RK Rules for Arrangement of Electrical Installations. ALL SECTIONS.
Language: English |
Tobacco and tobacco product. Determination of phosphor organic pesticides. Thin layer chromatographic method
Language: English |
Tobacco and tobacco product. Determination of chloro-organic pesticides. Thin layer chromatographic method
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.