GOST 8.338-2002
ГОСТ 8.338-2002
|
|
State system for ensuring the uniformity of measurements. Thermoelectric transducers. Verification procedure
Государственная система обеспечения единства измерений. Преобразователи термоэлектрические. Методика поверки
Status: Valid - Supersedes
The standard applies to immersed thermoelectric converters (TP) with metal thermocouples as thermosensitive elements according to GOST 6616 with nominal static characteristics with an immersion length not less than 250 mm, designed for temperature measurements from 0 to 1800 ° C, and establishes the method of their primary and periodic verification. The standard applies to imported immersed TP and TP in accordance with GOST 23847.
Стандарт распространяется на погружаемые термоэлектрические преобразователи (ТП) с металлическими термопарами в качестве термочувствительных элементов по ГОСТ 6616 с номинальными статическими характеристиками с длиной погружаемой части не менее 250 мм, предназначенные для измерений температуры от 0 до 1800 °С, и устанавливает методику их первичной и периодической поверок. Стандарт распространяется на импортируемые погружаемые ТП и ТП по ГОСТ 23847.
Choose Language:
Format: Electronic (pdf/doc)
Approved: State Committee of the Russian Federation for Standardization and Metrology,
2/12/2003
SKU: RUSS69301
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
17 Metrology and measurements. Physical phenomena »
PromExpert »
SECTION II. METROLOGICAL »
I Organizational and technical bases of metrological support »
2 Technical basics of metrological support »
2.3 Verification, calibration and testing of measuring instruments »
2.3.6 Thermophysical and temperature measurements »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.020 Metrology and measurements in general »
National standards »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.020 Metrology and measurements in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T8 State measurement system »
T88 Methods of verification and metrological certification »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T8 State measurement system »
T88 Methods of verification and metrological certification »
T88.6 Instruments for determining composition, state and properties of substances »
National Standards for OKSTU »
SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS »
State system for ensuring the uniformity of measurements (GSI) »
As a Replacement Of:
GOST 8.338-78: State system for ensuring the uniformity of measurements. Thermal converters of industrial thermocouple thermometers. Methods and means of verification
The Document References:
GOST 10821-75: Wire made of platinum and platinum-rhodium alloys for thermoelectric thermometers
GOST 12.2.007.9-93: Electric heating equipment safety
GOST 12.3.019-80: Occupational safety standards system. Electrical tests and measurements. General safety requirements
GOST 1790-77: Wire made of chrome, aluminum, copper and constantan alloys for thermo electrodes of thermo-electric converters
GOST 1791-67: Wire from nickel and copper-nickel alloys for extension leads to the thermoelectric transducers.
GOST 18389-73: Wire made of platinum and its alloys
GOST 19904-90: Cold-rolled steel sheets. Dimensions
GOST 19908-90: Transparent quartz glass crucibles, basins, cups, flasks, funnels, test-tubes and caps. General specifications
GOST 23847-79: Metal sheath thermoelectric temperature transducers of КТХАС, КТХАСп, КТХКС types. Specifications
GOST 25706-83: Magnifiers
GOST 28498-90: Liquid-in-glass thermometers
GOST 5582-75: Corrosion-resistant, heat-proof, and heat-resistant thin-sheet rolled stock
GOST 6616-94: Thermoelectric converters. General specifications
GOST 8.338-78: State system for ensuring the uniformity of measurements. Thermal converters of industrial thermocouple thermometers. Methods and means of verification
GOST 8.558-93: State system for ensuring the uniformity of measurements. State verification procedure for temperature measuring
GOST 859-2001: Copper. Grades
GOST 8711-93: Direct acting indicating analogue electrical measuring instruments and their accessories. Part 2. Special requirements for ammeters and voltmeters
GOST 9245-79: Measuring direct current potentiometers
GOST R 8.585-2001: State system for ensuring the uniformity of measurements. Thermocouples. Nominal static characteristics of conversion
PR 50.2.006-94: Procedure for calibration of measurement equipment
PR 50.2.007-2001: State system for ensuring the uniformity of measurements. Verification marks
PR 50.2.007-94: State system for ensuring uniformity of measurements. Verification marks
The Document is Referenced By:
GOST 10821-2007: Wire made of platinum and platinum-rhodium alloys for thermoelectric temperature transducers. Specifications
GOST 10821-75: Wire made of platinum and platinum-rhodium alloys for thermoelectric thermometers
GOST 1790-2016: Wire made of chromel alloy T, alumel, copes and constantan for thermoelectrodes of thermoelectric converters. Specification
GOST 1791-2014: Wire of nickel and copper-nickel alloys for extending wires for the thermoelectric converters. Specifications.
GOST 22666-2016: Copper wire and kopel alloy wire for low-temperature thermoelectrical transducers. Specifications
GOST 25.502-79: Methods of mechanical testing of metals
GOST 32978-2014: Solid mineral fuel. Determination of ash fusibility
GOST R 54238-2010: Solid mineral fuels. Determination of ash fusibility
GOST R 55001-2012: General requirements for performance of chambers for industrial products environments endurance tests. Certification methods for chambers (without load) for salt spray tests
GOST R 57266-2016: Safes for storing drugs, psychotropic substances and their precursors. Requirements, classification and test methods
GOST R 58992-2020: Materials for aircraft gas turbine engines. Fatigue test methods at elevated temperatures
GOST R 8.611-2005: State system for ensuring the uniformity of measurements. Standard thermoelectric platinum rhodium/platinum converters of the first, the second and the third grades. Verification procedure
MI 2322-99: Recommendation. State system for ensuring uniformity of measurements. Typical norms of time for calibration of measuring instruments
MI 2418-97: State system for ensuring uniformity of measurements. Classification and application of technical means for testing oil and petroleum products
MI 2996-2006: State system of measuring uniformity provision. Digital and compact thermometers TCM 9410. Verification method
MI 3090-2007: State system for ensuring uniformity of measurements. Thermoelectric converters with immersion length less than 150 mm. Method of verification
MI 3091-2007: State system for ensuring uniformity of measurements. Thermoelectric converters with an additional channel for the reference cable thermoelectric converter. Method of verification
MI 3442-14: State system for ensuring uniformity of measurements. The amount of oil produced in the Ostroluk field and the Ternovsky field of the West Lebedevsky license area of OAO NK Saratovneftegeofizika
Order 1180: On the establishment of methods of verification of measuring instruments
ST TsKBA 106-2011: Pipe fittings. Oxidation of titanium alloy parts
|
Customers Who Viewed This Item Also Viewed:
 |
Jet fuels
Language: English |
System for ensuring the reliability and safety of construction sites. Loads and impacts. design standards
Language: English |
Chill moulds. Ventilation channels. Dimensions
Language: English |
Laminated glued wood. Methods for determination of ultimate and modulus of elasticity in static bending
Language: English |
Microbiology of food and animal feeding stuffs. Methods for detection and enumeration of sulphite-reducing bacteria growing under anaerobic conditions
Language: English |
Rails of types P38 and P42. Technical conditions
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
