GOST R 50538-93
ГОСТ Р 50538-93
|
|
Miniature fuses. Cartridge fuse-links
Миниатюрные плавкие предохранители. Трубчатые плавкие вставки
Status: Not effective - Superseded. IUS 6-2011
The standard establishes special requirements for tubular fuses of miniature fuses of sizes 5x20 mm and 6.3x32 mm, used to protect electrical appliances, electronic equipment and its components, usually designed for indoor use. Requirements and information on tests given in the standard are in addition to those specified in GOST R 50537.
Стандарт устанавливает специальные требования к трубчатым плавким вставкам миниатюрных плавких предохранителей размеров 5х20 мм и 6,3х32 мм, применяемых для защиты электрических приборов, электронной аппаратуры и ее компонентов, обычно предназначенных для эксплуатации в помещениях. Требования и сведения по испытаниям, приведенные в стандарте, являются дополнением к указанным в ГОСТ Р 50537.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of Russia,
3/26/1993
SKU: RUSS69324
The Product is Contained in the Following Classifiers:
Evidence base (TR CU, Technical Regulation of the Customs Union) »
004/2011 TR CU. About safety of low voltage equipment »
Regulations and standards (to TR CU 004/2011) »
ISO classifier »
29 ELECTRICAL ENGINEERING »
29.120 Electrical fittings »
29.120.50 Fuses and other protective devices in case of overload »
National standards »
29 ELECTRICAL ENGINEERING »
29.120 Electrical fittings »
29.120.50 Fuses and other protective devices in case of overload »
National Standards for KGS (State Standards Classification) »
Latest edition »
E Electronic engineering, electronics and communications »
E2 Elements of electronic equipment »
E29 Test methods. Packaging. Marking »
National Standards for OKSTU »
ELECTRONIC PRODUCTS, EXCEPT RESISTORS, CAPACITORS, SEMICONDUCTOR DEVICES AND INTEGRAL MICROCIRCUITS »
Installation products and assembly parts »
The Document is Replaced With:
GOST R IEC 60127-2-2010: Miniature fuses. Part 2. Cartridge fuse links
The Document References:
GOST 2.710-81: Unified system for design documentation. Alpha-numerical designations in electrical diagrams
GOST 2.721-74: Unified system for design documentation. Graphical designations in schemes. Graphical symbols of general use
GOST 26246.5-89: Epoxy-impregnated glass cloth foil-clad electrical insulating material of stipulated combustibility for printed circuit boards.
GOST 28211-89: Basic environmental testing procedures. Part 2. Tests. Test T: Soldering
GOST 8.417-2002: State system for ensuring the uniformity of measurements. Units of quantities
GOST 8032-84: Preferred numbers and series of preferred numbers
GOST R 50537-93: Miniature fuses. Definitions for miniature fuses and general requirements for miniature fuse-links
The Document is Referenced By:
GOST 12.2.006-87: Safety of the electronic mains-connected and similar devices intended for everyday and similar general-purpose use
GOST 30850.2.1-2002: Switches for household or similar stationary electrical facilities. Parts 2-1. Additional requirements to semiconductor switches and testing methods.
GOST R 50030.7.3-2009: Low-voltage switchgear and control gear. Part 7.3. Ancillary equipment. Safety requirements for fuse terminal blocks
GOST R 50537-93: Miniature fuses. Definitions for miniature fuses and general requirements for miniature fuse-links
GOST R 50541-93: Miniature fuses. Guide lines for quality assessment of miniature fuse-links
GOST R 51324.2.1-99: Switches for household and similar fixed electrical installations. Part 2-1. Particular requirements for electronic switches and test methods
GOST R 51330.10-99: Electrical apparatus for explosive gas atmospheres. Part 11. Spark-free power line, type i
GOST R 51330.17-99: Explosion-protected electrical apparatus. Part 18. Type of protection (m)
GOST R 52065-2003: Miner's explosion protected caplights. Part 1. General requirements and test methods
GOST R 52065-2007: Caplights for use in mines susceptible to firedamp. Part 1. General requirements and testing methods in relation to the risk of explosion
GOST R 52350.1-2005: Electrical apparatus for explosive gas atmospheres. Part 1. Flameproof enclosures 'd'
GOST R 54416-2011: Incandescent lamps. Safety specifications. Part 3. Tungsten-halogen lamps (non-vehicle)
GOST R IEC 127-6-99: Miniature fuses. Part 6. Fuse-holders for miniature cartridge fuse-links
GOST R IEC 491-95: Safety requirements for electronic flash apparatus for photographic purposes
GOST R IEC 60065-2002: Audio-, video- and similar electronic apparatus. Safety requirements
GOST R IEC 60065-2005: Audio, video and similar electronic apparatus. Safety requirements
GOST R IEC 60065-2009: Audio, video and similar electronic apparatus. Safety requirements
GOST R IEC 60079-1-2008: Explosive atmospheres. Part 1. Equipment protection by flameproof enclosures 'd'
GOST R IEC 60079-18-2008: Explosive atmospheres. Part 18. Equipment protection by encapsulation «m»
GOST R IEC 60079-18-2012: Explosive atmospheres. Part 18. Equipment protection by encapsulation «m»
GOST R IEC 60079-35-1-2011: Caplights for use in mines susceptible to firedamp. Part 1. General requirements and test methods in relation to the risk of explosion
GOST R IEC 60127-1-2005: Miniature fuses. Part 1. Definitions for miniature fuses and general requirements for miniature fuse-links
GOST R IEC 60730-1-2002: Automatic electrical controls for household and similar use. General requirements and test methods
GOST R IEC 60745-1-2005: Hand-held motor-operated electric tools. Safety and test methods. Part 1. General requirements
GOST R IEC 60950-2002: Safety of information technology equipment
GOST R IEC 61241-18-2009: Electrical apparatus for use in the presence of combustible dust. Part 18. Protection by encapsulation «mD»
STB IEC 60950-1-2003: Information technologies equipment. Safety. Part 1. General requirements
|
Customers Who Viewed This Item Also Viewed:
 |
Tight and slack wooden barrels
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Construction in seismic regions
Language: English |
2015 Kazakhstan PUE RK Rules for Arrangement of Electrical Installations. ALL SECTIONS.
Language: English |
Software for measuring instruments. Procedure for of certification. General provisions
Language: English |
Current transformers. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.