GOST R 52373-2005
ГОСТ Р 52373-2005
|
|
Insulated and protected wires for overhead power lines. General specifications
Провода самонесущие изолированные и защищенные для воздушных линий электропередачи. Общие технические условия
Status: Not effective - Canceled. Registration information 1417-st dated November 29, 2012 (official website of Rosstandart); IUS 11-2013
The standard applies to self-supporting insulated wires for overhead power lines of rated voltage up to 0.6
Стандарт распространяется на самонесущие изолированные провода для воздушных линий электропередачи на номинальное напряжение до 0,6/1 кВ включительно и защищенные провода для воздушных линий электропередачи на номинальное напряжение 20 кВ (для сетей на напряжение 10, 15 и 20 кв) и 35 кВ (для сетей на напряжение 35 кВ) номинальной частотой 50 Гц. Стандарт устанавливает основные требования к конструкциям и техническим характеристикам проводов, их эксплуатационные свойства и методы испытаний.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
9/9/2005
SKU: RUSS69340
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
29 Electrical Engineering »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
004/2011 TR CU. About safety of low voltage equipment »
Regulations and standards (to TR CU 004/2011) »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.15 Testing and control of products of electronic, optical and electrical industry »
4.15.1 Electric machines, electrical equipment and materials »
ISO classifier »
29 ELECTRICAL ENGINEERING »
29.060 Electrical Wires and Cables »
29.060.10 Wires »
National standards »
29 ELECTRICAL ENGINEERING »
29.060 Electrical Wires and Cables »
29.060.10 Wires »
National Standards for KGS (State Standards Classification) »
Latest edition »
E Power and electrical equipment »
E4 Electric cables, wires and cords »
E46 Cables, wires and cords for various purposes »
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 10446-80: Wire. Tensile test method
GOST 12175-90: Common test methods insulating and sheathing materials of electric cables. Methods for determining the density. Water absorption and shrinkage tests
GOST 12177-79: Cables, wires and cords. Methods of construction checking
GOST 15.309-98: System of product development and launching into manufacture. Test and acceptance of produced goods. Principal positions
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15845-80: Cables products. Terms and definitions
GOST 18690-82: Cables, wires, cord and armature. Marking, packing, carriage and storage
GOST 20.57.406-81: Electrical equipment, devices for electronic technology and quantum electronics
GOST 22483-77: Copper and aluminum conductors
GOST 27.410-87: Industrial product dependability. Inspection methods of reliability indices and plans of check tests on reliability
GOST 27893-88: Telephone cables. Methods of tests
GOST 2990-78: Cables, wires and cords
GOST 3345-76: Cables and insulated conductors. Method for the determination of the electric resistance of insulation
GOST 7229-76: Cables, wires and cords. Method of measurement of electrical resistance of conductors
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 51651-2000: Cable products. Quality system. Construction materials
GOST R IEC 60811-1-1-98: General test methods for insulating and sheathing materials of electric and optical cables. Measurements of thickness and overall dimensions. Tests for determining the mechanical properties
GOST R IEC 60811-1-2-2006: Common test methods for insulating and sheathing materials of electric and optical cables. Part 1-2. Methods for general application. Thermal ageing methods
GOST R IEC 60811-1-3-2007: Common test methods for insulating and sheathing materials of electric and optical cables. Part 1-3. General application methods. Methods for determining the density. Water absorption tests. Shrinkage test
GOST R IEC 60811-2-1-2002: Test methods specific to elastomeric compounds of insulating and sheathing materials of electric and optical cables. Ozone resistance, hot set and mineral oil immersion tests
GOST R IEC 60811-2-1-2006: Common test methods for insulating and sheathing materials of electric and optical cables. Part 2-1. Methods specific to elastomeric compounds. Ozone resistance, hot set and mineral oil immersion tests
GOST R IEC 60811-3-1-94: Test methods specific to PVC insulating and sheathing compounds of electric and optical cables. Pressure test at high temperature. Test for resistance to cracking
GOST R IEC 60811-4-1-2008: Common test methods for insulating and sheathing materials of electric and optical cables. Part 4-1. Methods specific to polyethylene and polypropylene compounds. Resistance to environmental stress cracking. Measurement of the melt flow index. Carbon black and/or mineral filler content measurement in polyethylene by direct combustion. Measurement of carbon black content by thermogravimetric analysis (TGA). Assessment of carbon black dispersion in polyethylene using a microscope
GOST R IEC 60811-4-1-99: Specific test methods for insulating and sheathing polyethylene and polypropylene compounds of electric cables. Resistance to environmental stress cracking. Wrapping test after thermal ageing in air. Measurement of the melt flow index. Carbon black and/or mineral content measurement in PE
GOST R IEC 811-1-2-94: Common test methods for insulating and sheathing materials of electric cables. Thermal ageing methods
The Document is Referenced By:
SP 226.1326000.2014: Power supply of not traction consumers. Rules for design, construction and renovation
|
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
