GOST R 53481-2009
ГОСТ Р 53481-2009
|
|
Lubrication systems. Safety requirements
Системы смазочные. Требования безопасности
Status: Effective - Introduced for the first time
This standard applies to lubrication systems and their constituent devices for leading a liquid or plastic lubricant to the surfaces of friction of machines and mechanisms. This standard lists the dangers and factors that arise during the operation of lubrication systems and affect the safety of machines in violation of the conditions and rules of operation, the marginal standards of requirements for design and operation and measures to ensure them. The safety requirements established by the standard apply to all stages of the creation and operation of new and upgraded in-use during the certification of lubrication systems and their constituent devices. The requirements of this standard do not apply to lubrication systems and their constituent devices, designed and manufactured prior to the introduction of the standard.
Настоящий стандарт распространяется на смазочные системы и входящие в их состав устройства для подведения жидкого или пластичного смазочного материала к поверхностям трения машин и механизмов. В настоящем стандарте перечислены опасности и факторы, которые возникают при работе смазочных систем и влияют на безопасность машин при нарушении условий и правил эксплуатации, указаны предельные нормы требований при проектировании и эксплуатации и мероприятия по их обеспечению. Установленные стандартом требования безопасности распространяются на все этапы создания и эксплуатации новых и модернизации находящихся в эксплуатации при проведении сертификации смазочных систем и входящих в их состав устройств. Требования настоящего стандарта не распространяются на смазочные системы и входящие в их состав устройства, спроектированные и изготовленные до момента введения стандарта в действие
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/9/2009
SKU: RUSS69353
The Product is Contained in the Following Classifiers:
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.110 Safety of machinery »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.110 Safety of machinery »
ISO classifier »
21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES »
21.260 Lubrication Systems »
National standards »
21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES »
21.260 Lubrication Systems »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T5 Documentation System »
T58 System of standards infield of nature conservation and improvement of use of natural resources, labor safety, scientific organization of labor »
The Document References:
Federal Law 184-FZ: About technical regulation
Federal Law 7-FZ: Environmental Protection
Federal Law 89-FZ: Production and Consumption Wastes
GOST 12.1.003-83: Noise. General safety requirements
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 12.1.010-76: Explosion safety. General requirements
GOST 12.1.012-2004: Occupational safety stаndards system. Vibration safety. General requirements
GOST 12.1.016-79: Work area air
GOST 12.1.019-79: Occupational safety standards system. Electric safety. General requirements and nomenclature of kinds of protection
GOST 12.1.050-86: Occupational safety standards system. Methods of noise measurement at work-places
GOST 12.2.003-91: Industrial equipment. General safety requirements
GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements
GOST 12.2.032-78: Operators location in a silting position. General ergonomic requirements
GOST 12.2.033-78: Operators location in a standing position General ergonomic requirements
GOST 12.3.002-75: Occupational safety standards system. Manufacturing processes. General safety requirements
GOST 12.4.040-78: Industrial equipment controls
GOST 13716-73: Slinging arrangements for vessels and apparatus. Specifications
GOST 14202-69: Pipe-lines of industrial plants. Identification coloring, safety signs and marking screens
GOST 14254-96: Degrees of protection provided by enclosures (IP Code)
GOST 16887-71: Liquid-solid separation by filtering and centrifuging. Terms and definitions
GOST 16962-71: Electronic and electrical equipment. Mechanical and climatic influence. Requirements and test methods
GOST 17108-86: Positive-displacement hydraulic drive and lubricating systems. Methods of parameters measurement
GOST 17216-2001: Industrial cleanliness. Grades of liquids purity
GOST 17433-80: Industrial purity. Compressed air. Grades of contamination
GOST 17752-81: Hydraulic and pneumatic drive. Terms and definitions
GOST 2.601-2006: Unified system for design documentation. Exploitative documents
GOST 2.721-74: Unified system for design documentation. Graphical designations in schemes. Graphical symbols of general use
GOST 20765-87: Lubricating systems. Terms and definitions
GOST 21752-76: Man-machine system Control hand wheels and steering wheels General ergonomic requirements
GOST 21753-76: Man -machine system control levers
GOST 22614-77: «Man-machine» system. Key-actuated and push-button switches and commutators. General ergonomic requirements
GOST 22615-77: «Man-machine» system. Fumbler switches and commutators. General ergonomic requirements
GOST 22976-78: Hydraulic drives, pneumatic actuators and lubrication systems
GOST 25277-82: Filtering elements for volume hydraulic drives and lubricant systems
GOST 28988-91: Positive-displacement hydraulic drives, pneumatic drives and lubricating systems
GOST 29010-91: Lubricating systems. Testing methods
GOST 30541-97: Lubrication systems. Lubrication deliverers. General technical requirements and test methods
GOST 30720-2001: Noise of machines. Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level
GOST 4751-73: Screw rings. Specifications
GOST ISO 8041-2006: Vibration. Human response to vibration. Measuring instrumentation
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 1.5-2004: Standardization in the Russian Federation. National standards of the Russian Federation. Rules of structure, drafting, presentation and indication
GOST R 12.4.026-2001: Occupational safety standards system. Safety colors, safety signs and signal marking. Purpose and rules of application. General technical requirements and characteristics. Test methods
GOST R 50552-93: Industrial purity. Filtering materials. Specifications
GOST R 50553-93: Industrial purity. Filters and their elements. Specification
GOST R 50556-93: Hydraulic fluid power. Particulate contamination analysis. Extraction of fluid samples from lines of an operating systems
GOST R 50558-93: Industrial purity. Lubricating and cooling liquids. Specifications
GOST R 50559-93: Industrial purity. General requirements for supplying, transporting, storage and feeding of working liquids
GOST R IEC 60204-1-2007: Safety of machinery. Electrical equipment of machines and mechanisms. Part 1. General requirements
GOST R ISO 12100-1-2007: Safety of machinery. Basic concepts, general principles for design. Part 1. Basic terminology, methodology
GOST R ISO 12100-2-2007: Safety of machinery. Basic concepts, general principles for design. Part 2. Technical principles
PB 03-576-03: Regulations of design and safe operation of pressure vessels
POT R M-016-2001: Inter-Industry Occupational Safety and Health Regulations (Safety Regulations) for Operation of Electrical Installations
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Clear sheet glass. Specifications
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.