GOST R 55073-2012
ГОСТ Р 55073-2012
|
|
Resistance polymer composites for repairing industrial pipe-line. Specifications
Химостойкие полимерные композиты для ремонта технологических трубопроводов. Общие технические условия
Status: Effective - Introduced for the first time. IUS 11-2014
This standard establishes the general requirements for chemical-resistant polymer composites intended for the repair of process pipelines operating at hazardous production facilities at industrial enterprises in various sectors of industrial and economic activity for the transport of gaseous, vaporous and liquid, including pulp-like media in the range of residual pressure (vacuum) 0.001 MPa to a nominal pressure of 10 MPa and operating temperatures from minus 50 ° C to plus 180 ° C. The provisions of this standard are fundamental in the development of working documentation, including technical specifications and other regulatory and technical documents on repair processes and operations in the repair of process pipelines with composite materials
Настоящий стандарт устанавливает общие требования к химостойким полимерным композитам, предназначенным для ремонта технологических трубопроводов, эксплуатируемых на опасных производственных объектах, на промышленных предприятиях в различных отраслях производственно-хозяйственной деятельности для транспортирования газообразных, парообразных и жидких, в том числе пульпообразных сред в диапазоне от остаточного давления (вакуума) 0,001 МПа до условного давления 10 МПа и рабочих температур от минус 50 °С до плюс 180 °С. Положения настоящего стандарта являются основополагающими при разработке рабочей документации, в том числе технических условий и других нормативных и технических документов на ремонтные процессы и операции при ремонте технологических трубопроводов композитными материалами
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
11/14/2012
SKU: RUSS69370
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
83 Rubber, technical rubber, asbestos and plastic industries »
Standards for pipe fittings (TPA) »
9. Materials for piping valves (TPA) »
9.2 Polymer and composite materials »
ISO classifier »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.120 Reinforced plastics »
National standards »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.120 Reinforced plastics »
The Document References:
Federal Law 184-FZ: About technical regulation
GN 2.1.6.1338-03: Maximum allowable concentrations (MACs) of pollutants in the air of residential areas
GN 2.2.5.1313-03: Maximum allowable concentrations (MACs) of harmful substances in occupational air
GOST 11262-80: Plastics. Tensile strength test method.
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.018-93: Fire and explosion safety of static electricity. General requirements.
GOST 12.1.044-89: Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination
GOST 12.2.003-91: Industrial equipment. General safety requirements
GOST 12.3.030-83: Occupation safety standards system. Safety requirements. Plastics processing
GOST 12.4.004-74: Filtering protective mask RPG-67
GOST 12.4.011-89: Occupational safety standards system. Means of protection. General requirements and classification
GOST 12.4.021-75: Ventilation systems. General requirements
GOST 12.4.028-76: Respirators шб-1 "lepestok"
GOST 12.4.068-79: Occupational safety standards system. Dermatologic personal safety means. Classification and general requirements
GOST 12.4.121-83: Industrial filtering gas-masks
GOST 12020-72: Plastics. Testing methods of plastics resistance to chemical substances
GOST 15139-69: Plastics. Methods for the determination of density (mass density)
GOST 17.1.3.13-86: Hydrosphere. General requirements for surface water protection against pollution
GOST 17.4.3.04-85: Nature protection. Soils. General requirements for contamination control and protection
GOST 17035-86: Plastics. Method for measuring thickness of plastic films and sheets
GOST 20010-93: Industrial rubber gloves
GOST 21341-75: Plastics and ebonite. Method of determining the Martens heat resistance temperature
GOST 22372-77: Dielectric materials. Methods of determination of permittivity and power factor with in a frequency range of 100 to 5·10 in 6 degree Hz
GOST 30480-97: Ensuring of wear resistance of products. Methods assays wear resistance. Principles of provision. General
GOST 4647-80: Plastics. Method for determination of Charpy's impact strength
GOST 9.402-2004: Unified system of corrosion and ageing protection. Paint coatings. Metal surface preparation for painting
GOST 9.407-84: Unified system of corrosion and ageing protection. Paint coatings. Method of appearance rating.
GOST 9550-81: Plastics. Methods for determination of elasticity modulus at strength, compression and bending
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 12.1.019-2009: Occupational safety standards system. Electrical safety. General requirements and nomenclature of kinds of protection
GOST R 52108-2003: Resources saving. Waste treatment. Basic principles
GOST R 54559-2011: Fibre reinforced thermosetting plastic pipes and parts of pipelines. Terms and definitions
PB 03-585-03: Process Pipelines Design and Safe Operation Rules
SanPiN 2.1.7.1322-03: Hygienic requirements regarding dumping and decontamination of industrial and consumable waste
The Document is Referenced By:
GOST R 55074-2012: Chemical resistance polymer composites for lining industrial tanks and vessels. General specifications
Customers Who Viewed This Item Also Viewed:
 |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English |
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.