Steel. Methods of test and estimation of macrostructure
Сталь. Методы испытаний и оценки макроструктуры
Status: Effective - Supersedes. The limitation of the effectiveness period has been lifted: Protocol No. 4-93 of the IGU dated 10.21.93 (IUS 4-1994)
The standard applies to forged and rolled carbon, alloyed and high alloyed steels and establishes test methods and reference scales for evaluating the macrostructure, as well as classification of macrostructure defects and fractures of bars and billets wi
Стандарт распространяется на кованые и катаные углеродистые, легированные и высоколегированные стали и устанавливает методы испытаний и эталонные шкалы для оценки макроструктуры, а также классификацию дефектов макроструктурыи изломов прутков и заготовок д
Format: Electronic (pdf/doc)
Page Count: 104
Approved: State Committee of Standards of the Council of Ministers of the USSR,
The Product is Contained in the Following Classifiers:
Construction (Max) »
Other state standards used in construction »
77 Metallurgy »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.12 Testing and control of products of metallurgical industry »
4.12.1 Ferrous metals »
ISO classifier »
77 METALLURGY »
77.080 Ferrous metals »
77.080.20 Steel »
National standards »
77 METALLURGY »
77.080 Ferrous metals »
77.080.20 Steel »
National Standards for KGS (State Standards Classification) »
Latest edition »
V Metals and metal products »
V0 General rules and regulations on metallurgy »
V09 Test methods. Packaging. Marking »
National Standards for OKSTU »
CAST IRON, FERRO ALLOYS, STEEL »
Control methods (testing, analysis, measurements) »
National Standards for OKSTU »
FINISHED ROLLED STEELS (INCLUDING BILL FOR EXPORT) »
Control methods (testing, analysis, measurements) »
As a Replacement Of:
GOST 10243-62: Steel. Method of control of macrostructure
The Document References:
GOST 10752-79: Photographic paper 'Unibrom'. Specifications
GOST 2053-77: Reagents. Sodium sulphide 9-aqueous. Specifications
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 3118-77: Reagents. Hydrochloric acid. Specifications
GOST 4165-78: Reageuts. Copper II sulphate pentahydrate. Specifications
GOST 4204-77: Reagents. Sulphuric acid. Specifications
GOST 4220-75: Reagents. Potassium bichromate. Specifications
GOST 4328-77: Reagents. Sodium hydroxide. Specifications
GOST 4461-77: Reagents. Nitric acid. Specifications
GOST 6456-75: Abrasive paper
ST SEV 223-75: Sodium sulfate (sodium thiosulfate)
The Document is Referenced By:
GOST 1050-2013: Metal products from nonalloyed structural quality and special steels. General specification
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 1051-73: Calibrated quality steel
GOST 10702-2016: Rolled high-quality structural non-alloy and alloy steel for cold forging. General specifications
GOST 10702-78: Steel bars, carbon and alloy, structural, for cold extruding and upsetting. Specifications
GOST 10791-2004: All-rolled wheels. Specifications
GOST 10791-2011: All-rolled wheels. Specifications
GOST 10791-89: Solid rolled wheels
GOST 10884-81: Heat strengthened steel bars of periodical section for concrete reinforcement. Technical requirements
GOST 10884-94: Thermomechanically hardened steel bars for reinforced concrete constructions. Specifications
GOST 10885-85: Hot-rolled two-ply corrosion-resistant steel sheets
GOST 11036-75: Electrotechnical quality unalloyed steel. Specifications
GOST 13877-80: Sucker rods and couplings
GOST 13877-96: Sucker rods and sucker rod couplings. Specifications
GOST 14082-78: Bars and plates precision alloys with assigned temperature coefficient of linear expansion. Specifications
GOST 14119-85: Rods from precision alloys for elastic elements
GOST 1414-75: Construction steel with enhanced and high machinability
GOST 1435-74: Non-alloyed tool steel. Specification
GOST 1435-90: Unalloyed tool steel bars, strips and coils
GOST 1435-99: Bars, strips and reels of tool unalloyed steel. General specifications
GOST 14959-2016: Spring nonalloy and alloy steel product. Specifications
GOST 14959-79: Spring carbon and alloy steel bars. Specifications
GOST 1577-81: Rolled sheets and wide strips of structural quality steel. Specifications
GOST 1577-93: Plate and broadband roll stock of construction fine steel.
GOST 15891-70: Hot-rolled fashioned strip two layered steel for plough-shares. Specifications
GOST 18572-2014: Rolling bearings. Axle box cylindrical roller bearings for rolling stock. Specification
GOST 18907-73: Hard-worked heat-treated ground bars from high-alloy and corrosion-resistant steel
GOST 18968-73: Corrosion-resistant and high temperature steel rods and strips for steam turbine blades
GOST 19265-73: Bars and strips out of high-speed steel. Specifications
GOST 19442-74: Shaped bars for blades and bars for blade coupling of steam turbines made of corrosion-resistant and high-temperature steel
GOST 20072-74: Heat-resistant steel
GOST 21022-75: Chromic steel for precise bearings. Specifications
GOST 21729-76: Construction cold-shaped and heat-shaped carbon and alloy steel pipes. Specification.
GOST 22838-77: Heat-resistant alloys. Methods of testing and estimation of macrostructures
GOST 23270-89: Tube-billets for machining
GOST 23705-79: Hot-rolled and forged high-temperature alloy bars
GOST 24182-80: Open-hearth steel rails, P75, P65 and P50 types for wide gauge railways. Specifications
GOST 28393-89: PM bars and strips of high-speed steel. General specifications
GOST 30272-96: Black collar axles (profile stock) for 1520 mm gauge railways. Specifications
GOST 30564-98: Seamless hot-worked carbon and alloy steel pipes and tubes with special properties. Specifications
GOST 31334-2007: Axles for rolling stock of 1520 mm gauge railways. Specifications
GOST 31373-2008: Wheelsets of locomotives and motor-powered units. Strength calculations and tests
GOST 32528-2013: Hot-deformed seamless steel pipes. Specifications
GOST 32769-2014: Rolling bearings. Taper bearing unit for rolling stock axle boxes. Specification
GOST 32773-2014: All-rolled wheels, tyres and rolled wheel centres for railway rolling stock. Scale of macrostructure standards
GOST 3281-93: Axles for 1520 (1,524) mm gauge railway locomotives
GOST 33184-2014: Joint bars for rails of gauge railway. Specifications
GOST 33200-2014: Axles for wheelsets of railway rolling stock. General specifications
GOST 33229-2015: Tubes for boiler and heat exchanging equipment. Technical specifications. Part 1. Seamless steel pipes to work under pressure not more than 6,4 MPa and at temperatures not exceeding 400 C
GOST 34636-2020: Pipe billet. General specifications
GOST 3541-79: Forged steel rollers for cold rolling of metals
GOST 398-2010: Rough tyres for railway rolling stock. Specifications
GOST 4008-89: Axles of full gauge railway cars. Specifications
GOST 4543-2016: Metal products from structural alloy steel. Specification
GOST 4543-71: Structural alloyed steel
GOST 4728-2010: Axle billets for railway rolling stock. Specifications
GOST 4728-89: Shaft blanks for the rolling stock of the railroads with 1520 mm wide track
GOST 4728-96: Axle billets for the railway rolling stock of 1520 mm gauge
GOST 550-75: Seamless steel tubes for petroleum processing and petrochemical industry. Specifications
GOST 5520-2017: Rolled plate of unalloyed and alloyed steel for boilers and vessels working under pressure. Technical conditions
GOST 5520-79: Carbon, low-alloy and alloy sheet steel for boilers and pressure vessels. Specifications
GOST 5876-82: Types P18 and P24 narrow-gauge railway rails
GOST 5949-2018: Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
GOST 5949-75: Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
GOST 5950-2000: Tool alloy steel bars, strips and coils. General specifications
GOST 5950-73: Bars and strips from a toolhouse steel alloy
GOST 6690-83: Axes for metro carriages. Specifications
GOST 800-78: Bearing tubes. Technical requirements
GOST 801-78: Bearing steel. Specifications
GOST 803-81: Hot-rolled strips of carbon high-grade steel for plating
GOST 8319.0-75: Hot-rolled steel periodical lengthwise-rolled profiles. Specifications
GOST 8536-79: Blanks for marine shafts and rudder stocks. Specifications
GOST R 50.04.02-2018: Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of testing. Qualification testing of heat treatment processes
GOST R 50.04.04-2018: Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of testing. Qualification testing for technologies of working procedures by pressure
GOST R 50.04.05-2018: Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of testing. Qualification testing for the steels and alloys melting and casting procedures
GOST R 51045-2014: Rails of ways technological railways transport. General specifications
GOST R 51161-2002: Sucker rods, mouth stocks and couplings for them. Specifications
GOST R 51685-2000: Railway rails. General specifications.
GOST R 51685-2013: Railway rails. General specifications.
GOST R 52277-2004: Tamping picks of ballast tampers for levelling and lining railway tracks. Specifications
GOST R 52942-2008: Railway applications. Axles. Product requirements.
GOST R 53383-2009: Hot-deformed seamless steel pipes. Specifications
GOST R 53932-2010: Tube billet. General specifications
GOST R 54864-2011: Hot-deformed seamless steel pipes for the welded steel structures. Specifications
GOST R 54864-2016: Hot-deformed seamless steel pipes for the welded steel structures. Specifications
GOST R 54909-2012: Metal products from alloyed steel and alloys for valves of internal combustion engines. Specifications
GOST R 55374-2012: Alloyed structural rolled steel for bridge building. General specifications
GOST R 55442-2013: Tubes for boiler and heat exchanging equipment. Specifications. Part 1. Seamless steel pipes to work under pressure not more than 6,4 MPa and at temperatures not exceeding 400 °C
GOST R 55497-2013: Check railway rails. Specifications
GOST R 55498-2013: Rolled wheel centres for railway rolling stock. Technical specifications
GOST R 55820-2013: Switch and crossing rails. Specifications
GOST R 56030-2014: Pipes for details of bearings. Technical specifications
GOST R 56299-2014: Rolled products from bearing steel. Specifications
GOST R 56594-2015: Hot-deformed seamless pipes made of corrosion-resistant high-alloy steel. Specifications
GOST R 57179-2016: Thermite welding of rails. The method of testing and quality control
GOST R 57180-2016: Welding joints. Methods for determination of mechanical properties, macrostructure and microstructure
GOST R 57423-2017: Tubes for boiler and heat exchanging equipment. Part 2. Seamless steel tubes for pressure purposes more 6, 4 MPa and temperatures exceeding 400 °C. Specifications
GOST R 57910-2017: Materials for additive process. Control and tests methods
GOST R 58177-2018: United power system and isolated power systems. Thermal power plants. Thermal-mechanical equipment of thermal power plants. Control of condition of metal. Norms and requirements
GOST R 58228-2018: Continuous cast steel billet. Testing and assessment methods of the macrostructure
GOST R 58915-2020: Rolled plates of cryogenic steels. Specifications
Manual for SNiP II-23-81*: Manual on the design of steel structures of overhead power lines (VL) power transmission towers and outdoor switchgears (outdoor switchgear) of substations with voltages above 1 kV
Manual for SNiP II-23-81*: Strength Design Guide for Steel Structures
Manual for SNiP II-23-81*: Steel Structural Engineering Tutorial
MDS 13-20.2004: Comprehensive methods for the inspection and energy audit of reconstructed buildings. Design Guide
NB ZhT TM 02-98: The safety standards for rail transport. Metal products for railway rolling stock. Standards of safety.
NB ZhT TsT-TsV-TsL 012-2003: Axle rolling bearings for rolling stock of railways. Safety standards
NB ZhT TsV-TsL 014-2003: Axle rolling bearings for rolling stock of railways. Safety standards
OST 108.004.10-86: Quality control program of nuclear energetics products.
OST 108.030.113-87: Carbon and alloy steel forgings for thermal and nuclear power stations equipment and pipelines. Technical specifications.
OST 108.030.124-85: Details and prefabricated units made of pearlitic steels for pipelines with environment pressure P>2.2 MPa (22 kg/cm2) in nuclear power plants. General Specifications.
OST 108.958.04-85: General-purpose forgings for turbines and compressors. Specification.
OST 24.013.20-90: Forged steel rollers for cold rolling of metals. Specifications.
OST 24.125.60-89: Details and prefabricated units of steam and hot water in thermal power plants. General Specifications.
OST 3-1686-90: Billets made of structural steel for engineering. General Specifications.
OST 95 227-92: Non-standardized products of general machine-building applications. General technical requirements.
OTU 3-01: Vessels and apparatuses. General specifications for the repair of buildings
PNST 394-2020: Steel pipes for the manufacture of equipment and pipelines of nuclear plants. General specifications. Part 1. Seamless steel pipes from unalloyed and alloyed steels
RD 22-16-2005*: Guiding regulatory material. Hoisting machines. Selection of materials for the manufacture, repair and reconstruction of welded steel structures
RD 34.17.427-89: Procedural Guidelines. Nondestructive Testing at Thermal Power Stations. General Requirements
RD EO 18.104.22.168.0867-2012: Methods for assessing the technical condition and residual life of building structures of nuclear power plants
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
SNiP 3.03.01-87: Bearing and enclosing structures
SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87
ST RK 2432-2013: Railway rails differentially strengthened and not-heat-strengthened. General specification
ST SSFZhT TsT TsL TsV-137-2002: Rolling stock of mainline railways. Axle box rolling bearings. Standard testing method.
ST TsKBA 010-2004: Pipe fittings. Forgings, stampings and rolled products. Technical requirements
ST TsKBA 015-2005: Pipe fittings. The program of quality control of fittings of nuclear power plants
TU 1310-043-38948552-2017: Hot-deformed seamless tubes mechanically machined from corrosion-resistant steel 08X18H10T
TU 1317-006.1-593377520-2003: Steel seamless oil and gas pipelines of increased operational reliability for the field construction of TNK OJSC
TU 14-159-1128-2008: Steel and seamless hot-deformed cold-resistant pipes for gas pipelines of gas-lift systems and arrangement of gas fields
TU 14-3-190-2004: Seamless steel pipes for boiler plants and pipelines
TU 14-3-460:2009: Seamless steel pipes for steam boilers and pipelines. Technical conditions
TU 14-3-587-77: Seamless hot-rolled pipes of steel grade 20 for the refining industry
TU 14-3R-1128-2007: Seamless cold-resistant steel pipes for gas pipelines of gas-lift systems for oil production and gas field equipment. Technical conditions
TU 14-3R-115-2010: Centrifugally cast pipes for the chemical and petrochemical industries. Technical conditions
TU 14-3R-197-2001: Seamless pipes made of corrosion-resistant steel with high surface quality. Technical conditions
TU 14-3R-251-2007: Seamless steel pipes for chemical and petrochemical plants with conditional pressure Py = 19.6 - 98 MPa (200 - 1000 kgf/cm2)
TU 14-3R-51-2001: Seamless steel pipes, hot-rolled, thick-walled for mechanical engineering
TU 14-3R-53-2001: Seamless mechanically machined steel pipes for steam pipelines
TU 14-3R-54-2001: Seamless hot deformed pipes made of steel grade 20YUCH. Technical conditions
TU 14-3R-55-2001: Seamless steel pipes for steam boilers and pipelines
TU 14-3R-62-2002: Seamless hot-deformed steel pipes made of 15X5M steel for the petroleum refining industry. Technical conditions
TU 3-1002-77: Corrosion-resistant high-strength spring wire
VPNRM 484-86: Industry-Specific Specified Quantity Allowances for Materials Used in Installation Practices and Military Construction. Quality Control and Thermal Treatment of Welded Joints
Customers Who Viewed This Item Also Viewed:
Special railway rolling stok. Dynamic and strength testing procedures
Blanks for marine shafts and rudder stocks. Specifications
Tempered glass. Specifications.
Glass with low emissivity hard coating. Specifications.
Glass laminated. Specifications.
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.