GOST 6033-80

ГОСТ 6033-80

Basic norms of interchangeability. Involute splined joints with 30° profile angle. Dimensions, tolerances and measurable sizes

Основные нормы взаимозаменяемости. Соединения шлицевые эвольвентные с углом профиля 30°. Размеры, допуски и измеряемые величины

Status: Effective. The limitation of effectiveness has been lifted: Decree of the State Standard No. 3080 of 10/13/89

The standard applies to spline joints with an involute tooth profile arranged parallel to the joint axis with an angle of 30 ° and establishes the initial contour, the shape of the teeth, nominal diameters, modules and number of teeth, nominal dimensions and measured values when centered on the side surfaces of the teeth, as well as tolerances and landings.

Стандарт распространяется на шлицевые соединения с эвольвентным профилем зубьев, расположенных параллельно оси соединения, с углом 30°и и устанавливает исходный контур, форму зубьев, номинальные диаметры, модули и числа зубьев, номинальные размеры и измеряемые величины при центрировании по боковым поверхностям зубьев, а также допуски и посадки.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 84

Approved: Gosstandart of the USSR, 6/3/1980

SKU: RUSS69492

Price: $498.00

English keywords: keys; keyways; slots;



The Product is Contained in the Following Classifiers:

Standards for pipe fittings (TPA) » 8. Piping valves (TPA) design » 8.1 General design issues piping valves (TPA) » 8.1.2 Interchangeability and other design requirements »

ISO classifier » 21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES » 21.120 Shafts and couplings » 21.120.30 Splines, keyways, splines »

National standards » 21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES » 21.120 Shafts and couplings » 21.120.30 Splines, keyways, splines »

National Standards for KGS (State Standards Classification) » Latest edition » G Machines, equipment and tools » G1 General parts and units of machines » G14 Keyed, slotted and wedge connections »

National Standards for OKSTU » SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS » Detachable connections (threads, keys, splines, etc.) »


The Document is Referenced By:

GOST 15620-77: Overload claw clutches for general industrial practice. Main data and dimensions

GOST 15620-93: Safety jaw clutch couplings. Parameters and dimensions

GOST 15622-77: Slipping clutches. Main parameters and dimensions

GOST 15622-96: Safety slipping couplings. Parameters, design and dimensions

GOST 20742-81: Single chain couplings. Main data. Dimensions

GOST 20742-93: Chain couplings. Parameters and dimensions

GOST 23982-85: Fertilizing machinery

GOST 24246-80: Box clutches. Basic parameters. Design and dimensions

GOST 24246-96: Box clutches. Parameters, design and dimensions

GOST 24969-81: Gauges for checking 30° involute splined joints. Tolerances

GOST 25157-82: Broaches with diameter 12 and 14 mm for slitting holes with involute profile and centring at outside diameter with module 1 mm double driven. Construction and dimensions

GOST 25158-82: Broaches with diameter from 15 to 90 mm for slitting holes with involute profile and centring at outside diameter with module from 1 to 2,5 mm. Construction and dimensions

GOST 25159-82: Broaches with diameter from 15 to 90 mm for slitting holes with involute profile and centring at outside diameter with module from 1 to 2,5 mm, double driven. Construction and dimensions

GOST 25160-82: Broaches with diameter from 45 to 90 mm for slitting holes with involute profile and centring at outside diameter with module from 3 to 5 mm. Construction and dimensions

GOST 25161-82: Broaches with diameter from 70 to 90 mm for slitting holes with involute profile and centring at outside diameter with module from 3,5 to 5 mm. Double driven. Construction and dimensions

GOST 28048-89: Broaches with diameter from 50 to 120 mm for slitting holes with involute profile with round tail and centring at outside diameter with module from 1,5 to 2,5 mm. Construction

GOST 28049-89: Broaches with diameter from 90 to 120 mm for slitting holes with involute profile with round tail and centring at outside diameter with module from 2,5 mm. Construction

GOST 28050-89: Broaches with diameter from 55 to 130 mm for slitting holes with involute profile with round tail and centring at outside diameter with module from 3 to 5 mm. Construction

GOST 28051-89: Broaches with diameter from 70 to 130 mm for slitting holes with involute profile with round tail and centring at outside diameter with module from 3 to 5 mm. Construction

GOST 28300-2010: Cardan shafts of traction drive of diesel locomotives and diesel trains. General specifications

GOST 28300-89: Cardan shafts of traction drive of diesel locomotives and diesel trains. Types, main parameters and dimensions, technical requirements

GOST 28442-90: Broaches for cylindrical, slitting and polyhedral profile holes. Specifications

GOST 28524-90: Mobile means of small-scale mechanization of agricultural works. Power take-off and power intake connections of small-sized uniaxial tractors (motoblocks). Main parameters and dimensions

GOST 33032-2014: Cardan shafts of agricultural machinery. General specifications

GOST 34287-2017: Pipe fittings. Rotary actuators. Connecting dimensions

GOST R 50035-92: Combined broaches with diameter from 50 to 120 mm for slitting holes with involute profile with wind round tail and centring at outside diameter with module from 1,5 to 2,5 mm. Construction

GOST R 50036-92: Combined broaches with diameter from 90 to 120 mm for slitting holes with involute profile with wind round tail and centring at outside diameter with module from 2,5 mm. Construction

GOST R 50037-92: Combined broaches with diameter from 55 to 130 mm for slitting holes with involute profile with wind round tail and centring at outside diameter with module from 3 to 4 mm. Construction

GOST R 50038-92: Combined broaches with diameter from 55 to 130 mm for slitting holes with involute profile with wind round tail and centring at outside diameter with module from 3 to 5. Construction

GOST R 50893-96: Safety bool clutches. Basic parameters and dimensions. Technical requirements

GOST R 56830-2015: Petroleum and natural gas industries. Electrical submersible pump units. General technical requirements

OST 48-41-91: Engineering products of non-ferrous metallurgy. General Specifications.

R 50-73-88: Recommendations. Calibers for control of splined involute connections with a profile angle of 30 degrees. Construction and main dimensions

R 50-83-88: Recommendations. Calculations and tests of strength. Strength calculations for shafts and axles

TU 24-09.411-82: Special electric bridge cranes

Customers Who Viewed This Item Also Viewed:

Occupation safety standards system. Semiconductor converters of electric energy. Safety requirements
Language: English
Price: $13.00
Nature protection. Hydrosphere. General requirements to surface and underground water control against pollution by oil and oil products
Language: English
Price: $8.00
Man-machine system Semigraphics General ergonomic requirements
Language: English
Price: $90.00
Occupational safety standards system. Power frequency electric fields. Permissible levels of field strength and requirements for control at work-places
Language: English
Price: $49.00
Occupational safety standards system. Means of protection. General requirements and classification
Language: English
Price: $38.00
Occupational safety standard system. Electrotechnical devices for voltage more than 1 000 v
Language: English
Price: $38.00
Occupation safety standards system. Safety requirements. Switching devices for voltages below 1000 v
Language: English
Price: $13.00
Safety valves, control valves and pressure regulators. Face-to-face lengths
Language: English
Price: $41.00
Cables and cable fittings. Safety requirements
Language: English
Price: $18.00
Occupational safety standards system. Loading and unloading works General safety requirements
Language: English
Price: $43.00
Ventilation systems. General requirements
Language: English
Price: $28.00
Occupational safety standards system. Controls of industrial equipment. General safety requirements
Language: English
Price: $23.00
Occupational safety standards system. Transporting process of loads in all fields of national economy. General requirements safety
Language: English
Price: $76.00
Cargo marking
Language: English
Price: $216.00
Work area air
Language: English
Price: $58.00
General sanitary requirements for working zone air
Language: English
Price: $385.00
Fire safety. General requirements
Language: English
Price: $350.00
Electrical articles. Grounding terminals and grounding signs
Language: English
Price: $172.00
Man-machine system. Operator's arm-chair. General ergonomic requirements
Language: English
Price: $73.00
Occupational safety standards system. Electrical safety. General requirements and nomenclature of kinds of protection
Language: English
Price: $135.03

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!