GOST R 54432-2011
ГОСТ Р 54432-2011
|
|
Flanges for valves, fittings, and pipelines for pressure from PN 1 to PN 200. Design, dimensions and general technical requirements
Фланцы арматуры, соединительных частей и трубопроводов на номинальное давление от PN 1 до PN 200. Конструкция, размеры и общие технические требования
Status: Not effective - Canceled. Registration information 443-st dated 05/25/2015 (the official website of Rosstandart); IUS 2-2016
This standard applies to the connecting flanges of pipe fittings, connecting parts and pipelines, as well as to the connecting flanges of machines, instruments, pipes, devices and tanks for nominal pressure from PN 1 to PN 200 and determines the design and dimensions of steel and cast iron flanges , types of forms of sealing surfaces, establishes technical requirements for the manufacture, labeling, testing and control. This standard also provides guidance on material selection for flanges and fasteners. On the flanges for other objects, parameters and conditions of application are GOST 1536, GOST 4433, GOST 9399, GOST 25660, GOST 28759.1-GOST 28759.5. The standard can be used to confirm compliance.
Настоящий стандарт распространяется на присоединительные фланцы трубопроводной арматуры, соединительных частей и трубопроводов, а также на присоединительные фланцы машин, приборов, патрубков, аппаратов и резервуаров на номинальное давление от PN 1 до PN 200 и устанавливает конструкцию и размеры стальных и чугунных фланцев, определяет типы фланцев, типы форм уплотнительных поверхностей, устанавливает технические требования к изготовлению, маркировке, испытаниям и контролю. Также в настоящем стандарте приведены рекомендации по выбору материала для фланцев и крепежных деталей. На фланцы для других объектов, параметров и условий применения действуют ГОСТ 1536, ГОСТ 4433, ГОСТ 9399, ГОСТ 25660, ГОСТ 28759.1-ГОСТ 28759.5. Стандарт может быть использован для подтверждения соответствия
Choose Language:
Format: Electronic (pdf/doc)
Page Count: 96
Approved: Federal Agency for Technical Regulation and Metrology,
9/28/2011
SKU: RUSS69498
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
23 Hydraulic and pneumatic systems and components for general use. »
Welding regulations »
Main materials »
Welding regulations »
Pipelines »
Welding regulations »
Metal structures »
Welding regulations »
Admission Testing »
Welding regulations »
Non-destructive control »
Welding regulations »
Mechanical Testing »
Welding regulations »
Heat treatment »
Welding regulations »
Main materials »
Steel, cast iron »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
010/2011 TR CU. On safety of machinery and equipment »
Regulations and standards (to ТР ТС ТС 010/2011) »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
032/2013 TR CU. On safety of overpressure equipment »
Regulations and standards (to 032/2013 TR CU) »
Standards for pipe fittings (TPA) »
13. Standards for basic components and parts of injection molding machines »
13.1 Flanges »
Standards for pipe fittings (TPA) »
6. Standards of connecting sizes of piping valves (TPA) »
6.2 Weld connection »
Standards for pipe fittings (TPA) »
6. Standards of connecting sizes of piping valves (TPA) »
6.1 Flange connection »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.60 Flanges, couplings and connections »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.60 Flanges, couplings and connections »
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 1215-79: Malleable iron castings
GOST 1412-85: Flakish graphite cast iron
GOST 14140-81: Basic norms of interchangeability. Position tolerances of bore axes for fasteners
GOST 14192-96: Cargo marking
GOST 14637-89: Thick sheet rolled stock of normal quality carbon steel
GOST 14792-80: Parts and work pieces made by oxygen and plasma arc cutting. Cut face accuracy and quality
GOST 15180-86: Flexible flat gaskets. Main parameters and dimensions
GOST 1536-76: Flanges for ship's pipeline systems. Coupling dimensions and sealing surfaces
GOST 1577-93: Plate and broadband roll stock of construction fine steel.
GOST 19281-89: Rolled steel with increased strength. General specifications
GOST 2.301-68: Unified system for design documentation. Formats
GOST 20072-74: Heat-resistant steel
GOST 20700-75: Bolts, studs, nuts and washers for flanged and anchor connections, corks and yokes with medium temperature from 0 to 650 °C. Specifications
GOST 22727-88: Rolled sheet. Ultrasonic test methods
GOST 23304-78: Bolts, studs, nuts and washers for flanged connections for atomic power plants. Technical requirements. Acceptance. Test methods. Marking, packing, transportation and storage
GOST 24507-80: Non-destructive testing. Forgings from ferrous and non-ferrous metals. Ultrasonic methods of slow defection
GOST 25054-81: Forgings made of corrosion-resistant steels and alloys
GOST 25660-83: Underwater pipeline sealing flanges 10,0 MPa (100 kgf/sq sm). Design
GOST 2590-2006: Round hot-rolled steel bars. Dimensions
GOST 2591-2006: Square hot-rolled steel bars. Dimensions
GOST 26349-84: Tube connections and fittings. Nominal pressures. Series
GOST 26645-85: Metal and alloy castings. Dimensions and mass tolerances and machining allowances.
GOST 28338-89: Nominal bores (nominal sizes)
GOST 28759.1-90: Flanges of vessels and apparatus. Types and parameters
GOST 28759.5-90: Flanges of vessels and apparatuses
GOST 30893.1-2002: Basic norms of interchangeability. General tolerances. Limit deviations for linear and angular dimensions without tolerance indications
GOST 356-80: Valves and details for piping. Pressures conditional, test and operational. Lines.
GOST 4433-76: Flanges of valves connecting pieces and pipelines for shipping systems. Types
GOST 4543-71: Structural alloyed steel
GOST 5520-79: Carbon, low-alloy and alloy sheet steel for boilers and pressure vessels. Specifications
GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades
GOST 5773-90: Book and magazine editions. Sizes
GOST 6032-2003: Corrosion-resistant steels and alloys. Test methods of intercrystalline corrosion resistance
GOST 7293-85: Cast iron with globular graphite for foundry
GOST 7350-77: Plate, corrosion-resistant, heat-resistant, and high-temperature steel
GOST 7505-89: Steel stamping forgings. Tolerances, allowances and forging laps
GOST 8479-70: Structural carbon and alloy steel forgings
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9399-81: Threaded steel flanges for Pn 20-100 MPa (200-1000 kgf/sq sm). Specifications.
GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature
GOST 977-88: Steel castings. General specifications
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 52376-2005: Heat-resistant spiral-wound gaskets. Types. Main dimensions
GOST R 52720-2007: Pipeline valves. Terms and definitions
GOST R 52857.4-2007: Vessels and apparatus. Norms and methods of strength calculation. Stength and leak-tightness calculation of flange joints
GOST R 53561-2009: Pipelines valves. Jackets of oval, octagonal section, lens steel for valves flanges. Design, dimension and general technical requirements
OST 108.030.113-87: Carbon and alloy steel forgings for thermal and nuclear power stations equipment and pipelines. Technical specifications.
OST 26-01-135-81: Vessels, devices and high-pressure pipeline parts forgings. General technical requirements, acceptance rules, Test methods.
PB 03-585-03: Process Pipelines Design and Safe Operation Rules
ST TsKBA 010-2004: Pipe fittings. Forgings, stampings and rolled products. Technical requirements
ST TsKBA 012-2005: Pipe fittings. Studs, bolts, nuts and washers for pipe fittings. Technical requirements
ST TsKBA 014-2004: Pipe fittings. Steel castings. General technical conditions
ST TsKBA 025-2006: Pipe fittings. Welding and quality control of welded joints. Technical requirements
ST TsKBA 026-2005: Pipe fittings. Heat treatment of blanks from carbon and alloyed structural steels. Typical process
ST TsKBA 050-2008: Pipe fittings. Castings from cast iron. Technical requirements
The Document is Referenced By:
GOST 32569-2013: Steel pipe technology. Requirements for design and operation of explosive and chemically dangerous production
GOST 33259-2015: Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
GOST R 18.12.01-2015: Technology of the aviation fuelling. Functional and technological parameters of airfield fuelling tankers (tankers). Customer requirements
GOST R 52630-2012: Steel welded vessels and apparatus. General specifications.
GOST R 54804-2011: Centrifugal pumps. Technical specifications. Class III
GOST R 54805-2011: Centrifugal pumps. Technical specifications. Class II
GOST R 54806-2011: Centrifugal pumps. Technical specifications. Class I
GOST R 55018-2012: Pipeline valves for objects of energetics. General specifications
GOST R 55020-2012: Pipeline valves. Knife gate valves for trunk pipelines. General specifications
GOST R 55430-2013: Detachable pipe joints. Evaluation of technical condition and methods of testing. Operation safety
GOST R 55509-2013: Pipeline valves. Metals used in pipeline valves production. Basic requirements for choice of materials
GOST R 56001-2014: Pipeline valves for objects of gas industry. General specifications
ST TsKBA 019-2012: Pipe fittings. Thermally expanded graphite based seals. General technical requirements
ST TsKBA 065-2008: Pipe fittings. The nomenclature of indicators. Questionnaires for design and order
Customers Who Viewed This Item Also Viewed:
 |
Special railway rolling stok. Dynamic and strength testing procedures
Language: English |
Blanks for marine shafts and rudder stocks. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.