imgalt

GOST 1.2-2009

ГОСТ 1.2-2009

Interstate system for standardization. Interstate standards, rules and recommendations on interstate standardization. Rules for development, taking over, application, renovation and cancellation

Межгосударственная система стандартизации. Стандарты межгосударственные, правила и рекомендации по межгосударственной стандартизации. Правила разработки, принятия, применения, обновления и отмены

Status: Not effective - Superseded. Information about the registration of 2157-st dated 12/12/2015 (the official website of the FSUE "Standartinform"); IUS 5-2016

This standard establishes rules for the development, adoption, application, updating (revision, amendment and amendment) and cancellation of documents on interstate standardization (interstate standards, rules and recommendations on interstate standardization). This standard does not apply to the procedure for the development, adoption, application, updating and cancellation of intergovernmental standards for defense products. In relation to this standard, additional and

Настоящий стандарт устанавливает правила разработки, принятия, применения, обновления (пересмотра, внесения изменений и поправок) и отмены документов по межгосударственной стандартизации (межгосударственных стандартов, правил и рекомендаций по межгосударственной стандартизации). Настоящий стандарт не распространяется на процедуру разработки, принятия, применения, обновления и отмены межгосударственных стандартов на оборонную продукцию. По отношению к настоящему стандарту на национальном уровне могут быть установлены дополнительные и/или конкретизирующие правила, которые распространяются на процедуры разработки межгосударственных стандартов, правил и рекомендаций по межгосударственной стандартизации, изменений к ним, а также правила применения и прекращения применения этих документов в отдельных государствах, в частности правила разработки и применения межгосударственных стандартов в области строительства и строительных материалов

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 12/15/2009

SKU: RUSS69513

Price: $478.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 01 General. Terminology. Standardization. Documentation »

PromExpert » SECTION I. TECHNICAL REGULATION » II Standardization » 2 Activities and organization of work on standardization »

ISO classifier » 01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION » 01.120 Standardization. General rules »

National standards » 01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION » 01.120 Standardization. General rules »

National Standards for KGS (State Standards Classification) » Latest edition » T General technical and organizational and methodological standards » T5 Documentation System » T50 State system of standardization and normative and technical documentation »


The Document is Replaced With:

GOST 1.2-2015: Interstate System for Standardization. Interstate standards. Rules for development, taking over, renovation and cancellation

As a Replacement Of:

GOST 1.2-97: Interstate system for standardization. Interstate standards, rules and recommendations on interstate standardization. Procedure for development, taking over application, renovation and cancellation

The Document References:

GOST 1.0-92: State System for Standardization of Russian Federation. Basic principles

GOST 1.1-2002: Interstate system for standardization. Terms and definitions

GOST 1.2-97: Interstate system for standardization. Interstate standards, rules and recommendations on interstate standardization. Procedure for development, taking over application, renovation and cancellation

GOST 1.3-2008: Interstate System for Standardization. Adoption rules and methods for international and regional standards as interstate standards

GOST 1.5-2001: Interstate system for standardization. Interstate standards, rules and recommendations on interstate standardization. General requirements for structure, drafting, presentation, content and indication

PMG 03-99: The procedure for registration and publication of interstate normative documents on standardization

PMG 22-2004: Rules for development of intergovernmental standartization program

PMG 48-2002: Order for electronic documents exchange

RMG 50-2002: Recommendations for application of references to standards in documentation and for indication of standard reference numbers in marking

SNiP 10-01-94: System of normative documents in construction. Basic provisions.

The Document is Referenced By:

GOST 1.3-2008: Interstate System for Standardization. Adoption rules and methods for international and regional standards as interstate standards

GOST 1.3-2014: Interstate system for standardization. Standards interstate. Rules of development on the basis of the international and regional standards

GOST 10444.11-2013: Microbiology of food and animal feeding stuffs. Methods for detection and enumeration of mesophilic lactic acid bacteria

GOST 10531-2013: Canned fried fish in marinade. Specifications

GOST 10637-2010: Wood particle boards. Method for determination of resistivity to nail and wood screw withdrawal

GOST 10791-2011: All-rolled wheels. Specifications

GOST 10922-2012: Welded reinforcing products and inserts, welded, lap and mechanical joints for reinforced concrete structures. General specifications

GOST 11018-2011: Traction railway stock wheelsets of 1520 mm gauge railways. General specifications

GOST 11024-2012: Concrete and reinforced concrete panels for external walls of residential and civil buildings. General specifications

GOST 11130-2013: Peat and products of its processing. Methods for determination of smalls content and impurities

GOST 11306-2013: Peat and products of its processing. Methods for determination of ash content

GOST 11532-2014: Nuts for rail joints. Specifications

GOST 12.2.011-2012: Occupational safety standards system. Building, road and earth-moving machinery. General safety requirements

GOST 12.2.120-2005: Occupational safety standards system. Cabs and operator’s workplaces of tractors and powered agricultural machines. General safety requirements

GOST 12.2.121-2013: Occupational safety standards system. Industrial tractors. General safety requirements

GOST 12.2.232-2012: Occupational safety standards system. Surface drilling equipment. Safety requirements

GOST 12.4.235-2012: Occupational safety standards system. Respiratory protective devices. Gas filters and combined filters. General technical requirements. Test methods. Marking

GOST 12.4.241-2013: Occupational safety standards system. Special clothing for protection from mechanical action. Method for determination of resistance to puncture

GOST 12571-2013: Sugar. Method for determination of sucrose

GOST 131-2013: Crude ethyl alcohol from edible raw material. Specifications

GOST 13462-2010: Palladium and its base alloys. Marks

GOST 13498-2010: Platinum and its base alloys. Marks

GOST 13673-2013: Milling peat. Method for determination of bulk density

GOST 13674-2013: Peat and products of its processing. Acceptance rules

GOST 14098-2014: Welded joints of reinforcement and inserts for reinforced concrete structures. Types, constructions and dimensions

GOST 14254-2015: Degrees of protection provided by enclosures (IP Code)

GOST 1452-2011: Helical springs for trucks and draw-and-buffer gears of railway rolling stock. Specifications

GOST 147-2013: Solid mineral fuel. Determination of gross calorific value and calculation of net calorific value

GOST 15612-2013: Products from wood and wood materials. Methods for determination of roughness parameters

GOST 1639-2009: Non-ferrous metals and alloys scrap and waste. General specifications

GOST 16445-2012: Serum haemolytic for the complement fixation test. Specification

GOST 16446-2012: Dry complement for the complement fixation test. Specification

GOST 17.2.3.02-2014: Regulations for establishing permissible limits of harmful pollutants emissions from industrial enterprises

GOST 17187-2010: Noise meters Part 1 Technical requirements

GOST 18124-2012: Chrysotile cement sheets are flat. Technical conditions

GOST 19496-2013: Meat and meat products. The method of histological investigation

GOST 19804-2012: Reinforced prefabricated concrete piles. Specifications

GOST 19912-2012: Soils. Field test methods: cone penetration test and dynamic probing

GOST 2.053-2013: Unified system for design documentation. Product electronic structure. General principles

GOST 2.307-2011: Unified system for design documentation. Drawing of dimensions and limit deviations

GOST 2.308-2011: Unified system of design documentation. Representation of limits of forms and surface lay-out on drawings

GOST 2.431-2008: Unified system for design documentation. Rules for making the graphical documents of glass-ware products. Basic requirements

GOST 2.501-2013: Unified system for design documentation. Registration and storage rules

GOST 2.503-2013: Unified system of design documentation. Rules of making modifications

GOST 2.511-2011: Unified system for design documentation. Rules for electronic documentation. General principles

GOST 2.601-2013: Unified system for design documentation. Exploitative documents

GOST 2.611-2011: Unified system for design documentation. Electronic parts catalogue. General principles

GOST 2.612-2011: Unified system of design documentation. Electronic logbook. General principles

GOST 2.702-2011: Unified system for design documentation. Rules for presentation of electric schemes.

GOST 20056-2013: Preserves of oceanic fish in special brine. Specifications

GOST 20276-2012: Soils. Field methods for determining the strength and strain characteristics

GOST 20522-2012: Soils. Methods of statistical treatment of test results

GOST 21.001-2013: System of design documents for construction. General principles

GOST 21.114-2013: System of design documents for construction. Rules for execution of sketch drawings of general views of non-standard products

GOST 21.201-2011: System of design documents for construction. Symbol graphics elements of buildings, works and structures

GOST 21.208-2013: System of design documents for construction. Industrial process automation. Instrumentation symbols for use in diagrams

GOST 21.301-2014: System of design documents for construction. General requirements for presentation of report documents on engineering investigation

GOST 21.302-2013: System of design documents for construction. Symbol graphics for engineering-geological investigation documents

GOST 21.408-2013: System of design documents for construction. Rules of industrial process automation working documentation execution

GOST 21.501-2011: System of design documents for construction. Rules for execution of the working documentation of architectural and construction solutions

GOST 21.601-2011: System of design documents for construction. Rules for execution of working documents of internal water and sewerage systems

GOST 21.607-2014: System of design documents for construction. Rules for execution of working documents for external electric lighting

GOST 21.608-2014: System of building design documents. Rules for execution of working documents of interior electric lighting

GOST 21.613-2014: System of design documents for construction. Rules for execution of the working documentation of power electrical equipment

GOST 21.701-2013: System of building design documents. Rules of executing of working documentation for motor-ways

GOST 21.704-2011: System of design documents for construction. Rules for execution of working documentation of outside networks of water supply and sewerage

GOST 21.709-2011: System of design documents for construction. Rules of executing of working documentation for linear structures of irrigation systems

GOST 22235-2010: Freight cars for 1520 mm gauge main line railways. General requirements for safety in loading-unloading and shunting operations

GOST 22696-2013: Rolling bearings. Cylindrical rollers. Specifications

GOST 22703-2012: Molded parts of coupler and automatic coupler devices of railway rolling stock. General specifications.

GOST 23061-2012: Soils. Methods for radioisotope measurement of density and humidity

GOST 24061-2012: Medicine remedies biological lyophilized for veterinary use. Method for determination mass moisture

GOST 24379.1-2012: Foundation bolts. Structure and dimensions

GOST 24701-2013: Peat. Methods for the determination of density

GOST 24754-2013: Mining electrical equipment of normal production. General technical requirements and test methods

GOST 24839-2012: Structural steelwork. Layout of holes in rolled shapes. Dimensions

GOST 24846-2012: Soils. Methods of measuring the strains of structures and building bases

GOST 25043-2013: Propylene. Specifications

GOST 25086-2011: Non-ferrous metals and their alloys. General requirements for methods of analysis

GOST 25192-2012: Concretes. Classification and general technical requirements

GOST 25358-2012: Soils. Field method of determining temperature

GOST 25535-2013: Glass and glass products. Heat resistance determination methods

GOST 25749-2005: Metal winding lids. General specifications

GOST 25898-2012: Building materials and products. Methods for determination of water vapour permeability and of steam-tightness

GOST 26633-2012: Heavy-weight and sand concretes. Specifications

GOST 26804-2012: Metal road safety barriers. Specifications

GOST 26877-2008: Metal products. Methods of measuring form variations

GOST 26983-2015: Darnitsky bread. Specifications

GOST 27217-2012: Soils. Field method for determining of frost-heave specific tangential forces

GOST 27294-2013: Explosion-proof mine low-voltage automatic switches. Technical requirements. Test methods

GOST 27307-2013: Explosion-proof mine low-voltage complete control devices to 1140 V. Technical requirements and test methods

GOST 27692-2012: Maintenance documentation for aeronautical engineering. Structure, statement, execution and contents of log books

GOST 27693-2012: Maintenance documentation for aeronautical engineering. Structure, statement, execution and contents of registration certificates, labels and air worthiness certificates

GOST 27751-2014: Reliability for constructions and foundations. General principles

GOST 28300-2010: Cardan shafts of traction drive of diesel locomotives and diesel trains. General specifications

GOST 28307-2013: Tractor-drawn trailers and semi-trailers. Methods of testing

GOST 28622-2012: Soils. Laboratory method for determination of frost-heave degree

GOST 28984-2011: Modular coordination of construction dimensions. General.

GOST 29185-2014: Microbiology of food and animal feeding stuffs. Methods for detection and enumeration of sulphite-reducing bacteria growing under anaerobic conditions

GOST 3.1001-2011: Unified system for technological documentation. General principles

GOST 3.1102-2011: Unified system of technological documentation. Stages of designing and types of documents. General principles

GOST 3.1103-2011: Unified system of technological documentation. Basic inscriptions. General principles

GOST 3.1105-2011: Unified system of technological documentation. Form and rules of making general-purpose documents

GOST 30324.2.9-2012: Medical electrical equipment. Part 2-9. Particular requirements for the safety of patient contact dosimeters used in radiotherapy with electrically connected radiation detectors

GOST 30340-2012: Corrugated chrysotile cement sheets. Specifications

GOST 30390-2013: Public catering services. Production of the public catering, realized to the population. General specifications

GOST 30515-2013: Cements. General specifications

GOST 30672-2012: Soils. Field testing. General

GOST 30777-2012: Turned, reclined, turned-reclined and sliding devices for windows and balcony doors. Specifications

GOST 30801.5-2012: Miniature fuses. Guide lines for quality assessment of miniature fuse-links

GOST 30804.4.11-2013: Electromagnetic compatibility of technical equipment. Voltage dips, short interruptions and voltage variations immunity. Requirements and test methods

GOST 30805.16.1.2-2013: Electromagnetic compatibility of technical equipment. Specification for industrial radio disturbance and immunity measuring apparatus and methods. Part 1-2. Industial radio disturbance and immunity measuring apparatus. Conducted radio disturbance measuring and immunity test apparatus

GOST 30852.10-2002: Electrical apparatus for explosive gas atmospheres. Part 11. Intrinsic safety i

GOST 30852.11-2002: Explosionproof electrical apparatus. Part 12. Classification of mixtures of gases or vapours with air according to their maximum experimental safe gaps and minimum igniting currents

GOST 30852.1-2002: Explosionproof electrical equipment. Part 1. Flameproof enclusure type explosion protection

GOST 30852.14-2002: Electrical apparatus for explosive gas atmospheres. Part 15. Type of protection n

GOST 30852.18-2002: Electrical apparatus for explosive gas atmospheres. Part 19. Repair and overhaul for apparatus used in explosive atmospheres (other than mines or explosives)

GOST 30852.19-2002: Electrical apparatus for explosive gas atmospheres. Part 20. Data for flammable gases and vapours, relating to the use of electrical apparatus

GOST 30852.2-2002: Electrical apparatus for explosive gas atmospheres. Part 1. Construction and verification test of flameproof enclosures of electrical apparatus. First supplement. Appendix D. Method of test for ascertainment of maximum experimental safe gap

GOST 30852.5-2002: Explosionprotected electrical apparatus. Part 4. Method of test for ignition temperature

GOST 30852.9-2002: Electrical apparatus for explosive gas atmospheres. Part 10. Classification of hazardous areas

GOST 31040-2002: Refractory products. Determination of modulus of rupture at elevated temperatures

GOST 31167-2009: Buildings and structures. Methods for determination of air permeability of building envelopes in field conditions

GOST 31187-2011: Main-line diesel locomotives. General technical requirements.

GOST 31222.2-2012: Medical electrical equipment. Characteristics of electro-optical X-ray image intensifiers. Part 2. Determination of the conversion factor

GOST 31223-2012: Cable reels for household and similar purposes. General requirements and test methods

GOST 31281-2004: Locking-sealing devices for transport and general and special purposes containers. General technical requirements

GOST 31282-2004: Locking devices. Classification

GOST 31315-2013: Electronic sealing devices. General technical requirement

GOST 31379-2009: Global navigation satellite systems. Personal receiver. Technical requirements

GOST 31402-2009: Brake cylinders for railway rolling stock. General specifications

GOST 31402-2013: Brake cylinders for railway rolling stock. General specifications

GOST 31417-2010: Vibration. Assessment of exposure to hand-transmitted vibration using information on vibration emitted by machines

GOST 31418-2010: Testing methods for the resistance of machines, devices and other engineering products to external acting mechanical factors. Impact testing with the modelling of impact spectre.

GOST 31419-2010: Testing methods for the resistance of machines, devices and other engineering products to external acting mechanical factors. Tests for the vibration with the imitation of some types of actions.

GOST 31420-2010: Machine noise. A.C. power generating set s with the actuator from the combustion engine. Measuring of the noise by the method of female face.

GOST 31421-2010: Vibration. Determination of the parameters of vibration characteristic of self-propelled vehicles. Ground transport.

GOST 31425.1-2010: Machine noise Procedure of tests for the noise of textile machines. Part 1 General requirements

GOST 31428-2011: Shunting diesel locomotives. General technical requirements

GOST 31439-2011: Equipment and components intended for use in potentially explosive atmospheres in underground mines

GOST 31440.1-2011: Reciprocating internal combustion engines. Safety requirements for design and construction of engines for use in potentially explosive atmospheres. Part 1. Group II engines for use in flammable gas and vapour atmospheres

GOST 31440.2-2011: Reciprocating internal combustion engines. Safety requirements for design and construction of engines for use in potentially explosive atmospheres. Part 2. Group I engines for use in underground workings susceptible to fired amp and/or combustible dust

GOST 31440.3-2011: Reciprocating internal combustion engines. Safety requirements for design and construction of engines for use in potentially explosive atmospheres. Part 3. Group III engines for use in flammable dust atmospheres

GOST 31441.2-2011: Non-electrical equipment for use in potentially explosive atmospheres. Part 2. Protection by flow restricting enclosure «fr»

GOST 31441.5-2011: Non-electrical equipment for potentially explosive atmospheres. Part 5. Protection by constructional safety «c»

GOST 31441.6-2011: Non-electrical equipment for use in potentially explosive atmospheres. Part 6. Protection by control of ignition source «b»

GOST 31441.8-2011: Non-electrical equipment for use in potentially explosive atmospheres. Part 8. Protection by liquid immersion «k»

GOST 31443-2012: Steel pipes for crafts pipelines. Specifications

GOST 31444-2012: Pipes from low-alloy steel for submsrine sea pipelines. General specifications

GOST 31447-2012: Steel weldes pipes for trunk gas pipelines, oil pipelines and oil products pipelines. Specifications

GOST 31470-2012: Poultry meat, edible offal and semi-processed products. Methods for organoleptic and physico-chemical examinations

GOST 31471-2011: Panic and emergency exit devices. Specifications

GOST 31503-2012: Milk and milk products. Determination of stabilazers content by gas chromatography method

GOST 31504-2012: Milk and milk products. Determination of preservatives and synthetic colors content by high performance liquid chromatography method

GOST 31536-2012: Wheelsets for the traction railway stock. Method of measuring electrical resistance

GOST 31539-2012: Live-cycle of railway rolling stock. Terms and definitions

GOST 31541-2012: Hammers. Safety requirements

GOST 31542-2012: Automatic and semi-automatic metal forming machines. Safety requirements

GOST 31550-2012: Pile driving hammers. Specifications

GOST 31552-2012: Plate compactor. General specifications

GOST 31554-2012: Front end loaders with telescopic boom. General specifications

GOST 31555-2012: Building front-end single-bucket loaders. Specifications

GOST 31558-2012: Mine belt conveyers. General specifications

GOST 31559-2012: Anchor supports. General pecifications

GOST 31560-2012: Metal frame yield supports. Arch support. General specifications

GOST 31562-2012: Рneumatic rock drills. General technical requirements

GOST 31565-2012: Cable products. Requirements of fire safety.

GOST 31593-2012: Machines and equipment for wood industrial low landings. Safety requirements. Control methods

GOST 31596-2012: Gas tightness of equipment and apparatus for gas welding, cutting and allied processes. Permissible rates of external gas leakage and measuring procedures

GOST 31601.2.2-2012: Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's). Part 2-2. Applicability of the general rules to RCCB's functionally dependent on line voltage

GOST 31605-2012: Asynchronous electrical mashines of power from 1 to 400 kW inclusive. Motors. Efficiency and power factors

GOST 31606-2012: Rotating electrical machines. Asynchronous motors of power from 0,12 to 400 kW inclusive. General technical requirements

GOST 31607-2012: Energy conservation. Norm-menhod securing. Basic concept

GOST 31610.1.1-2012: Electrical apparatus for explosive gas atmospheres. Part 1-1. Flameproof enclosures «D». Method of test for ascertainment of maximum experimental safe gap

GOST 31610.28-2012: Explosive atmospheres. Part 28. Protection of equipment and transmission systems using optical radiation

GOST 31610.5-2012: Electrical apparatus for explosive gas atmospheres. Part 5. Powder filling «q»

GOST 31610.6-2012: Electrical apparatus for explosive gas atmospheres. Part 6. Oil-immersion «o»

GOST 31611.2-2012: Caplights for use in mines susceptible to firedamp. Part 2. Performance and other safety-related matters

GOST 31612-2012: Leakage electric current mine-type protective devices for voltage nets to 1200 V. General technical requirements

GOST 31613-2012: Static electricity spark safety. General technical requirements and test methods

GOST 31614-2012: Explosion-proof mine electromagnetic starters up to 1140 V. Technical requirements and test methods

GOST 31616-2012: Annuloplasty rings. Technical requirements and test methods

GOST 31633-2012: Milk and milk products. Determination of mass portion of milk fat using photocolorimetry method

GOST 31636.2-2012: Safety in electroheat installations. Part 2. Particular requirements for resistance heating equipment

GOST 31671-2012: Foodstuffs. Determination of trace elements. Preparation of samples by pressure digestion

GOST 31672-2012: Foodstuffs. Method of electron paramagnetic resonance for detection of radiation-treated food containing cellulose

GOST 31704-2011: Sound absorbing materials. Sound absorption measurement method in reverberation room

GOST 31706-2011: Acoustical materials used floating floors in dwellings. Method for determination of dynamic stiffness

GOST 31707-2012: Foodstuffs. Determination of trace elements. Determination of total arsenic and selenium by hydride generation atomic absorption spectrometry (HGAAS) after pressure digestion

GOST 31708-2012: Microbiology of food and stuffs. Method for the detection and enumeration of presumptive Escherichia coli. Most probable number technique

GOST 31719-2012: Foodstuffs and feed. Rapid method of identification of raw composition (molecular)

GOST 31731-2012: Sparkling wine. Specification

GOST 31737-2012: Bitumen. Method of flow test using a floater

GOST 31738-2012: Bituminous paving mixtures. Determination of water and volatiles content

GOST 31739-2012: Bituminous paving mixtures. Determination of theoretical maximum specific gravity

GOST 31745-2012: Food products. Determination of PAHs content by HPLC method

GOST 31746-2012: Food products. Methods for detection and quantity determination of coagulase-positive staphylococci and Staphylococcus aureus

GOST 31747-2012: Food products. Methods for detection and quantity determination of coliformes

GOST 31748-2012: Foodstuffs. Determination of aflatoxin B1, and the total content of aflatoxins B1, B2, G1 and G2 in cereals, nuts and derived products. High-performance liquid chromatographic method

GOST 31756-2012: Animal and vegetable fats and oils. Determination of anisidine value

GOST 31803-2012: Sulfuric acid. Methods for analysis

GOST 31808-2012: Fresh pasta products. General specifications

GOST 31814-2012: Conformity assessment. General sampling rules for products testing during attestation assessment

GOST 31817.1.1-2012: Alarm systems. Part 1. General requirements. Section 1. General

GOST 31824-2012: Fibrous mist eliminators. Types and main parameters. Safety requirements. Methods of testing

GOST 31826-2012: Gas cleaning and dust catching equipment. Bag filters. Wet dust catching equipment. Safety requirement. Methods of testing

GOST 31827-2012: Liquid centrifugal separators. Safety requirements. Test methods

GOST 31830-2012: Electrostatic precipitators. Safety requirement and methods of testing

GOST 31831-2012: Centrifugal dust collectors. Safety requirement and methods of testing

GOST 31834-2012: Adsorptive gas cleaners. Safety requirements and test methods

GOST 31837-2012: Abcorptive gas purifiers. Safety requirements and test methods

GOST 31838-2012: Columns. Technical requirements

GOST 31844-2012: Petroleum and natural gas industries. Drilling and production equipment. Hoisting equipment. General technical equipments

GOST 31845-2012: Gas fuel locomotives. Explosion safety requirements

GOST 31857-2012: Drinking water. Methods for determination of surfactants content

GOST 31858-2012: Drinking water. Method for determination of chlorine-organic pesticides by gas-liquid chromatography

GOST 31859-2012: Water. Method for determination of chemical oxygen demand

GOST 31870-2012: Drinking water. Determination of elements content by atomic spectrometry methods

GOST 31893-2012: Conformity assessment. Standards System in Conformity Assessment

GOST 31897-2011: Roofing and hydraulic-insulating flexible bitumen-based and polymeric (thermoplastic or elastomer) materials. Method for determination of resistance to dynamic loading

GOST 31902-2012: Confectionery. Methods of determination of fat weight fraction

GOST 31904-2012: Food products. Methods of sampling for microbiological analyses

GOST 31912-2011: Thermal insulating products for building equipment and industrial installations. Determination of design thermal conductivity

GOST 31914-2012: High-strength heavy-weight and fine-grane concrete for situ-casting structures. Rules for control and quality assessment

GOST 31916-2012: Mushrooms. Cultivated fresh field mushrooms. Guide to cold storage and refrigerated transport

GOST 31923-2012: Extraction bees wax. Specifications

GOST 31925-2011: Building materials and products of high and medium thermal resistance. Methods of determination of thermal resistance by means of guarded hot plate and heat flow meter

GOST 31933-2012: Vegetable oils. Methods for determination of acid value

GOST 31937-2011: Buildings and constructions. Rules of inspection and of the technical condition

GOST 31938-2012: Fiber-reinforced polymer bar for concrete reinforcement. General specifications

GOST 31940-2012: Drinking water. Methods for determination of sulfate content

GOST 31944-2012: Load-bearing geophysical armoured cables. General specifications

GOST 31948-2012: Discharge lamps (excluding luminescent lamps). Safety requirements

GOST 31950-2012: Water. Method for determination of total mercury by flameless atomic absorption spectrometry

GOST 31952-2012: Water treatment for units. General requirements and methods of efficiency determination

GOST 31955.1-2013: Water quality. Detection and enumeration of Escherichia coli and coliform bacteria. Part 1. Membrane filtration method

GOST 31956-2012: Water. Methods for determination of chromium (VI) and total chromium

GOST 31957-2012: Water. Methods for determination of alkalinity and mass concentration of carbonates and hydrocarbonates

GOST 31958-2012: Water. Methods for determination of total and dissolved organic carbon

GOST 31960-2012: Water. Methods of toxicity determination by growth inhibition of marine unicellular algae Phaeodactylum tricornutum Bohlin and Sceletonema costatum (Greville) Cleve

GOST 31966-2012: Marine, lokomotive and industrial engines. General safety requirements

GOST 31967-2012: Internal combustion reciprocating engines. Emissions of harmful substances with the exhaust gases. Limit values and test methods

GOST 31977-2012: Dried milk products. Method for determination of bulk density

GOST 31982-2012: Food products, feeds, food raw materials. Method of determination of b-agonists by Gas chromatography. Mass Spectrometry

GOST 31988-2012: Public catering service. Method of calculation of wastes and losses of catering products

GOST 31994-2013: Traffic control devices. Roadside barriers. General technical requirements

GOST 31996-2012: Power cables with plastic insulation for rated voltages of 0,66; 1 and 3 kV. General specifications

GOST 32010-2013: Food products. Method for detection of Shigella species bacteria

GOST 32011-2013: Microbiology of food and animal feeding stuffs. Horizontal method for the detection of Escherichia coli О157

GOST 32012-2012: Milk and milk product. Methods for determination of the spores content of mesophilic anaerobic microorganisms

GOST 32014-2012: Food products, food raw materials. Method of determination of the nitrofuran mytobolites by high performance liquid chromatography - mass spectrometry (HPLC-MS)

GOST 32015-2012: Food products, feeds, food raw materials. Method of determination of anabolic steroids and stylben derivatives by gas chromatography using mass spectrometry

GOST 32021-2012: Hard rock aggregates and fillers for production dre building mixes. Specifications

GOST 32026-2012: Clay raw materials for manufacturing of claydite gravel, rubble and sand. Specifications

GOST 32027-2013: Fruit wine materials fermented and alcoholized after fermentation. Specifications

GOST 32049-2013: Food flavourings. General specifications

GOST 32064-2013: Food products. Methods for detection and quantity determination of family Enterobacteriaceae

GOST 32111.1-2013: Noise of machines. Sound power rating of air-conditioning and air-source heat pump equipment. Part 1. Non-ducted outdoor equipment

GOST 32123-2013: Animal and vegetable fats and oils. Determination of benzo[a]pyrene. Reverse-phase high performance liquid chromatography method

GOST 32133.2-2013: Electromagnetic compatibility of technical equipment. Uninterruptible power systems. Requirements and test methods

GOST 32139-2013: Petroleum and petroleum products. Determination of sulphur content by method of energy dispersive X-ray fluorescence spectrometry

GOST 32144-2013: Electric energy. Electromagnetic compatibility of technical equipment. Power quality limits in the public power supply systems

GOST 32145-2013: Electric energy. Electromagnetic compatibility of technical equipment. Еlectric energy quality control in the public power supply systems

GOST 32159-2013: Maize starch. General specifications

GOST 32161-2013: Foodstuffs. Method for cesium Сs-137 content determination

GOST 32163-2013: Foodstuffs. Method for strontium Sr-90 content determination

GOST 32164-2013: Foodstuffs. Sampling methods for stroncium Sr-90 and cesium Cs-137 determination

GOST 32227-2013: Deers for slaughter. Carcasses and semi-carcasses. Specifications

GOST 32256-2013: Sherbet Ice cream and Frozen Desserts with milk and milk products. General specifications

GOST 32257-2013: Milk and milk products. Method for determination of nitrate and nitrite contents

GOST 32258-2013: Milk and milk products. Method for determination of benz(a)pyrene mass fraction

GOST 32267-2013: Cutting oils. Determination of active sulphur

GOST 32271-2013: Petroleum asphalts. Determination of viscosity at elevated temperatures using a rotational viscometer

GOST 32281.1-2013: Glass in building. Determination of the bending strength of glass. Part 1. Fundamentals of testing glass

GOST 32299-2013: Paint materials. Pull-off test for adhesion

GOST 32300-2013: Paint materials. Method for determination of wet-scrub resistance and cleanability of coatings

GOST 32304-2013: Laminate flooring based on dry process wood fibreboards. Specifications

GOST 32305-2013: Rolling bearings. Thermal speed rating. Calculation and coefficients

GOST 32311-2012: Ceramic paving brick. Specifications

GOST 32315.1-2012: Roofing and hydraulic-insulating flexible bitumen-based materials. Method for determination of peel resistance of joints

GOST 32327-2013: Petroleum products. Determination for acid number by potentiometric titration

GOST 32329-2013: Petroleum products. Determination of corrosiveness to copper strip

GOST 32333-2013: Petroleum products. Determination of acid number by semi-micro color indicator titration

GOST 32353-2013: East Siberia coals for power supply and technological purposes. Specifications

GOST 32359-2013: Oil and gas-oil fields. Rules for reservoir engineering

GOST 32367-2013: Testing of chemicals of environmental hazard. Daphnia magna Reproduction Test

GOST 32371-2013: Testing of chemicals of health hazard. Skin absorption: In vivo method

GOST 32386-2013: Goods of household chemistry. Method for determination of active chlorine

GOST 32390-2013: Lubricating greases and oils. Method for determination of evaporating loss

GOST 32395-2013: Distribution boards for dwelling-houses. General specifications

GOST 32396-2013: Input-distributional boards for dwellings and public buildings. General specifications

GOST 32397-2013: Distribution boards for industrial and social buildings. General specifications

GOST 32400-2013: Molded side frame and bolster beam of вogies for railway freight wagons. Specifications

GOST 32405-2013: Solid hardmetal end mills. Specifications

GOST 32406-2013: Diamond and cubic boron nitride tools. Safety requirements

GOST 32421-2013: Classification of chemicals which hazard is caused by physical and chemical properties. Test methods of explosives

GOST 32432-2013: Testing of chemicals of environmental hazard. Aerobic and anaerobic transformation in aquatic sediment systems

GOST 32448-2013: Global navigation satellite system. Civil navigation receiver equipment for launchers, space tugs and space vehicles. Technical requirements

GOST 32490-2013: Geosynthetics. Index test procedure for the evaluation of mechanical damage under repeated loading

GOST 32508-2013: Diesel fuels. Determination of cetane number

GOST 32510-2013: Marine fuels. Specifications

GOST 32513-2013: Automotive fuels. Unleaded petrol. Specifications

GOST 32518.1-2013: Iron ores, concentrates, agglomerates and pellets. Determination of silica gravimetric method

GOST 32518.2-2013: Iron ores, concentrates, agglomerates and pellets. Determination of silica spectrophotometric method

GOST 32522-2013: Polypropylene woven sacks. General specifications

GOST 32527-2013: Mineral nitrogen-containing substances. Determination in air and water

GOST 32529-2013: Glass and glass products. Acceptance rules

GOST 32533-2013: Hexamethylene diamine. Determination in air

GOST 32534-2013: Diphenylol propane. Determination in air

GOST 32539-2013: Glass and glass products. Terms and definitions

GOST 32555-2013: Urea for industrial use. Photometric method for determination of biuret content

GOST 32558-2013: Coal. Determination of bulk density

GOST 32561-2013: Hard coal. Determination of plastic properties. Gieseler plastometer method

GOST 32562.1-2013: Coated glass. Classification

GOST 32562.3-2013: Coated glass. Test methods for class C and D coatings

GOST 32569-2013: Steel pipe technology. Requirements for design and operation of explosive and chemically dangerous production

GOST 32580-2013: p-Cresol. Determination in water

GOST 32581-2013: о-Cresol. Determination in water

GOST 32689.1-2014: Foods of plant origin. Multiresidue methods for the gas chromatographic determination of pesticide residues. Part 1. General considerations

GOST 32689.2-2014: Foods of plant origin. Multiresidue methods for the gas chromatographic determination of pesticide residues. Part 2. Methods for extraction and cleanup

GOST 32689.3-2014: Foods of plant origin. Multiresidue methods for the gas chromatographic determination of pesticide residues. Part 3. Determination and confirmatory tests

GOST 32756-2014: Automobile roads of general use. Requirements for intermediate acceptance work performed

GOST 32797-2014: Food products, food raw materials. Method of determination of the chynolony content by high performance liquid chromatography with mass spectrometry detector

GOST 32798-2014: Food products, food raw materials. Method for determination of the aminoglycosides content by high performance liquid chromatography with mass spectrometry detector

GOST 32834-2014: Food products, food raw materials. Method for determination of the anthelminthic by high performance liquid chromatography - mass spectrometry

GOST 32881-2014: Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry

GOST 32892-2014: Milk and dairy products. Method of pH determination

GOST 32901-2014: Milk and milk products. Methods of microbiological analysis

GOST 32931-2015: Profile steel pipes for metal constructions. Specifications

GOST 32951-2014: Semi-prepared meat and meat-contained product. General specifications

GOST 32992-2014: Quilted blankets and coverlets. General technical conditions

GOST 33073-2014: Electric energy. Electromagnetic compatibility of technical equipment. Control and monitoring of electric power quality in the public power supply systems

GOST 33259-2015: Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements

GOST 33303-2015: Foodstuffs. Sampling methods for determination of mycotoxins

GOST 33394-2015: Frozen pelmeni. Specifications

GOST 33482-2015: Food products, food raw materials, mixed feeds. Method for determination of anabolic steroids and stilbene derivatives by high performance liquid chromatography-mass spectrometry

GOST 33536-2015: Confectionery. Method for quantity determination of mesophilic aerobic and facultative-anaerobic microorganisms

GOST 33566-2015: Milk and dairy products. Determination of yeast and mould

GOST 33568-2015: Milk and dairy products. Methods for determination of salt-tolerant bacteria

GOST 33615-2015: Food products, food raw materials. Immunoenzymatic method for determination of furazolidone metabolite

GOST 3478-2012: Rolling bearings. Boundary dimensions

GOST 4835-2013: Wheelsets for freight and passenger car. Technical specifications

GOST 492-2006: Nickel, nickel and copper-nickel alloys treated by pressure. Grades

GOST 520-2011: Roll bearings. General specifications.

GOST 530-2012: Ceramic brick and stone. General specifications

GOST 5541-2002: Cork means of closing. General specifications

GOST 5632-2014: Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades

GOST 5962-2013: Grude ethyl alcohol from edible raw material. Specifications

GOST 6012-2011: Nickel. Methods of the chemical and atomic emission spectrographic analysis.

GOST 7190-2013: Liqueur-vodka products. General specifications

GOST 7392-2014: Crushed stone of solid rocks for ballast layer of rail ways. Specifications.

GOST 7409-2009: Freight cars. Requirements to paint coatings

GOST 7702.2.7-2013: Poultry meat, edible offal and poultry meat ready-to-cook. Methods for detection of Proteus bacteria

GOST 7746-2015: Current transformers. General specifications

GOST 7850-2013: Caprolactam. Specifications

GOST 7862-62: Automobile stationary scales for general use

GOST 7975-2013: Fresh food pumpkin. Specification

GOST 8.046-2010: State system for ensuring the uniformity of measurements. Optical dividing heads. Verification procedure

GOST 8.381-2009: State system for ensuring the uniformity of measurements. Standards. Ways for expressing the accuracy

GOST 8.393-2010: State system for ensuring the uniformity of measurements. Optical Quadrants. Verification procedure

GOST 8.540-2011: State system for ensuring the uniformity of measurement. State verification schedule of measuring devices of maximal values of impulse densities of electrical and magnetic fields.

GOST 8.591-2009: State system for ensuring the uniformity of measurements. Nanometre range relief measure with trapezoidal profile of elements. Verification method

GOST 8.592-2009: State system for ensuring the uniformity of measurements. Single-crystal silicon nanometre range relief measures. Geometrical shapes, linear size and manufacturing material requirements

GOST 8.593-2009: State system for ensuring the uniformity of measurements. Atomic-force scanning probe microscopes. Method for verification

GOST 8.594-2009: State system for ensuring the uniformity of measurements. Scanning electron microscopes. Method for verification

GOST 8.596-2010: State system for ensuring the uniformity of measurements. NMR-analysers for definition of oiliness and moisture content of agricultural materials. Verification procedure

GOST 8.600-2011: State system for ensuring the uniformity of measurement. Fuel tanks for liquid oil products. Checking methods.

GOST 8.613-2012: State system for ensuring the uniformity of measurements. Mineral fertilizer. Express methods of moisture content determination

GOST 849-2008: Primary nickel. Specifications

GOST 9.602-2005: Unified system of corrosion and ageing protection. Underground constructions. General requirements for corrosion protection

GOST 9128-2013: Asphaltic concrete and polymer asphaltic concrete mixtures, asphaltic concrete and polymer asphaltic concrete for roads and aerodromes. Specifications

GOST 9238-2013: Construction and rolling stock clearance diagrams

GOST 9246-2013: Bogies two-axle three-piece for freight wagons of 1520 mm gauge railways. General technical specifications

GOST 9573-2012: Thermal insulating plates of mineral wool on synthetic binder. Specifications

GOST 9758-2012: Porous inorganic aggregates for construction work. Test methods

GOST CISPR 15-2014: Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

GOST EN 1107-1-2011: Roofing and hydraulic-insulating flexible bitumen-based materials. Method for determination of linear dimensional change

GOST EN 1109-2011: Roofing and hydraulic-insulating flexible bitumen-based materials. Method for determination of flexibility at low temperature

GOST EN 12014-2-2014: Foodstuffs. Determination of nitrate and/or nitrite content. Part 2. HPLC/IC method for the determination of nitrate content of vegetables and vegetable products

GOST EN 12088-2011: Thermal insulating products in building applications. Method for determination of long-term moisture absorption by diffusion

GOST EN 12730-2011: Roofing and hydraulic-insulating flexible bitumen-based and polymeric (thermoplastic or elastomer) materials. Method for determination of resistance to static loading

GOST EN 13804-2013: Foodstuffs. Determination of trace elements. Performance criteria, general considerations and sample preparation

GOST EN 14152-2013: Foodstuffs. Determination of vitamin B2 by HPLC

GOST EN 14176-2015: Foodstuffs. Determination of domoic acid in mussels by HPLC

GOST EN 15957-2012: Fertilizers. Extraction of phosphorus which is soluble in neutral ammonium citrate

GOST EN 1605-2011: Thermal insulating products in building applications. Method for determination under specified compressive load and temperature conditions

GOST EN 1606-2011: Thermal insulating products in building applications. Method for determination of compressive creep

GOST EN 1849-2-2011: Roofing and hydraulic-insulating flexible polymeric (thermoplastic or elastomer) materials. Methods for determination of thickness and mass per unit area

GOST EN 1928-2011: Roofing and hydraulic-insulating flexible bitumen-based and polymeric (thermoplastic or elastomer) materials. Method for determination of watertightness

GOST EN 237-2013: Liquid petroleum products. Determination of low lead concentrations by atomic absorption spectrometry

GOST EN 397-2012: Occupational safety standards system. Safety helmets. General technical requirements. Test methods

GOST EN 511-2012: Occupational safety standards system. Personal protective means of hands. Protective gloves against cold. General technical requirements. Test methods

GOST EN 556-1-2011: Sterilization of medical devices. Requirements for medical devices to be designated «sterile». Part 1. Requirements for terminally sterilized medical devices

GOST EN 818-1-2011: Short link steel chains for lifting purposes. Safety. Part 1. General requirements for acceptance

GOST EN 818-2-2011: Short link steel chains for lifting purposes. Safety. Part 2. Medium tolerance steel chains for grade 8 chain slings

GOST EN 818-3-2011: Short link steel chains for lifting purposes. Safety. Part 3. Medium tolerance steel chains for grade 4 chain slings

GOST EN 818-4-2011: Short link steel chains for lifting purposes. Safety. Part 4. Chain slings of grade 8

GOST EN 818-5-2011: Short link steel chains for lifting purposes. Safety. Part 5. Chain slings of grade 4

GOST IEC 60034-5-2011: Rotating electrical machines. Part 5. Classification of protection degrees provided by the integral design of rotating electrical machines (IP code)

GOST IEC 60044-1-2013: Instrument transformers. Part 1. Current transformers

GOST IEC 60079-10-2-2011: Explosive atmospheres. Part 10-2. Classification of areas. Combustible dust atmospheres

GOST IEC 60079-30-1-2011: Explosive atmospheres. Electrical resistance trace heating. Part 30-1. General and testing requirements

GOST IEC 60127-4-2011: Miniature fuses. Part 4. Universal modular fuse-links for through-hole and surface mount types

GOST IEC 60227-7-2012: Polyvinylchloride insulated cables of rated voltages up to and including 450/750V. Part 7. Flexible cables screened and unscreened with two or more conductors

GOST IEC 60245-4-2011: Rubber insulated cables for rated voltages up to and including 450/750 V. Part 4. Cords and flexible cables

GOST IEC 60245-5-2011: Rubber insulated cables of rated voltages to 450/750 V including. Lift cables

GOST IEC 60245-6-2011: Rubber insulated cables of rated voltages up to and including 450/750 V. Arc welding electrode cables

GOST IEC 60245-7-2011: Rubber insulated cables of rated voltages to 450/750 v including. Heat-resistant ethylene-vinyl acetate rubber insulated cables

GOST IEC 60269-3-1-2011: Low-voltage fuses. Part 3-1. Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications). Sections I to IV

GOST IEC 60269-4-1-2011: Low-voltage fuses. Part 4-1. Supplementary requirements for fuse-links for the protection of semiconductor devices. Sections I to III. Examples of types of standardized fuse-links

GOST IEC 60331-21-2011: Tests for electric and optical fibre cables under fire conditions. Circuit integrity. Part 21. Procedures and requirements. Cables of rated voltage up to and including 0,6/1,0 kV.

GOST IEC 60331-31-2011: Tests for electric cables under fire conditions. Circuit integrity. Part 31. Procedures and requirements for fire with shock. Cables of rated voltage up to and including 0,6/1,0 kV

GOST IEC 60332-1-2-2011: Tests on electric and optical fibre cables under fire conditions. Part 1-2. Test for vertical flame propagation for a single insulated wire or cable. Procedure for 1 kW pre-mixed flame

GOST IEC 60332-1-3-2011: Tests on electric and optical fibre cables under fire conditions. Part 1-3. Test for vertical flame propagation for a single insulated wire or cable. Procedure for determination of flaming droplets/particles

GOST IEC 60332-2-1-2011: Tests on electric and optical fibre cables under fire conditions. Part 2-1. Test for vertical flame propagation for a single small insulated wire or cable. Apparatus

GOST IEC 60332-3-21-2011: Tests on electric and optical cables under fire conditions. Part 3-21. Flame spread of vertically-mounted bunched wires or cables. Category A F/R

GOST IEC 60335-2-109-2013: Safety of household and similar electrical appliances. Part 2-109. Particular requirements for UV radiation water treatment appliances

GOST IEC 60335-2-38-2013: Safety of household and similar electrical appliances. Part 2-38. Particular requirements for commercial electric griddles and griddle grills

GOST IEC 60335-2-39-2013: Safety of household and similar electrical appliances. Part 2-39. Particular requirements for commercial electric multi-purpose cooking pans

GOST IEC 60335-2-75-2013: Safety of household and similar electrical appliances. Part 2-75. Particular requirements for commercial dispensing appliances and vending machines

GOST IEC 60360-2012: Standard method of measurement of lamp cap temperature rise

GOST IEC 60432-2-2011: Safety specifications for incandescent lamps. Part 2. Tungsten halogen lamps for domestic and similar general lighting purposes

GOST IEC 60439-3-2012: Low-voltage switchgear and control gear assemblies. Part 3. Particular requirements for low-voltage switchgear and control gear assemblies intended to be installed in places where unskilled persons have access for their use. Test methods

GOST IEC 60598-2-18-2011: Luminaires. Part 2. Particular requirements. Section 18. Luminaires for swimming pools and similar applications

GOST IEC 60670-21-2013: Boxes and enclosures for electrical accessories for household and similar fixed electrical installations. Part 21. Particular requirements for boxes and enclosures with provision for suspension means

GOST IEC 60695-2-11-2013: Fire hazard testing. Part 2-11. Glowing/hot-wire based test methods. Glow-wire flammability test method for end-products

GOST IEC 60695-2-13-2012: Fire hazard testing. Part 2-13. Glowing/hot-wire based test methods. Glow-wire ignition temperature (GWIT) test method for materials

GOST IEC 60745-1-2011: Hand-held motor-operated electric tools. Safety and test methods. Part 1. General requirements

GOST IEC 60745-2-11-2011: Hand-held motor-operated electric tools. Safety and test methods. Part 2-11. Particular requirements for reciprocating saws (jig and sabre saws)

GOST IEC 60745-2-4-2011: Hand-held motor-operated electric tools. Safety and methods. Part 2-4. Particular requirements for sanders and polishers other than disk type

GOST IEC 60811-1-1-2011: General test methods for insulating and sheathing materials of electric and optical cables. Measurements of thickness and overall dimensions. Tests for determining the mechanical properties

GOST IEC 60811-1-2-2011: Common test methods for insulating and sheathing materials of electric and optical cables. Part 1-2. Methods for general application. Thermal ageing methods

GOST IEC 60811-1-3-2011: Common test methods for insulating and sheathing materials of electric and optical cables. Part 1-3. General application methods. Methods for determining the density. Water absorption tests. Shrinkage test

GOST IEC 60811-1-4-2011: Common test methods for insulating and sheathing materials of electric and optical cables. Part 1-4. Methods for general application. Test at low temperature

GOST IEC 60811-3-1-2011: Test methods specific to PVC insulating and sheathing compounds of electric and optical cables. Pressure test at high temperature. Test for resistance to cracking

GOST IEC 60811-3-2-2011: Test methods specific to PVC insulating and sheathing compounds of electric and optical cables. Loss of mass test. Thermal stability test

GOST IEC 60811-4-1-2011: Common test methods for insulating and sheathing materials of electric and optical cables. Part 4-1. Methods specific to polyethylene and polypropylene compounds. Resistance to environmental stress cracking. Measurement of the melt flow index. Carbon black and/or mineral filler content measurement in polyethylene by direct combustion. Measurement of carbon black content by thermogravimetric analysis (TGA). Assessment of carbon black dispersion in polyethylene using a microscope

GOST IEC 60811-5-1-2011: Test methods specific to filling compounds of electric cables. Drop-point. Separation of oil. Lower temperature brittleness. Total acid number. Absence of corrosive components. Permittivity at 23 °C. D.c. receptivity at 23 °C and 100 °C

GOST IEC 60825-1-2013: Safety of laser products. Part 1. Equipment classification, requirements and user’s guide

GOST IEC 60884-2-7-2013: Plugs and socket-outlets for household and similar purposes. Part 2-7. particular requirements for cord extension sets

GOST IEC 60950-1-2014: Information technology equipment. Safety. Part 1. General requirements

GOST IEC 60998-2-4-2011: Connecting devices for low-voltage circuits for household and similar purposes. Particular requirements for twist-on connecting devices

GOST IEC 60998-2-4-2013: Connecting devises for low-voltage circuit for household and similar purposes. Part 2-4. Particular requirements for twist-on connecting devices

GOST IEC 61010-031-2011: Safety requirements for electrical equipment for measurement, control and laboratory use. Part 031. Safety requirements for hand-held probe assemblies for electrical measurement and test

GOST IEC 61010-2-020-2011: Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-020. Particular requirements for laboratory centrifuges

GOST IEC 61029-2-2-2011: Electric transportable tools. Particular safety requirements and test methods of radial arm saws

GOST IEC 61029-2-8-2011: Electric transportable tools. Particular safety requirements and methods of testing single spindle vertical moulders

GOST IEC 61058-2-4-2012: Switches for appliances. Part 2-4. Particular requirements for independently mounted switches

GOST IEC 61058-2-5-2012: Switches for appliances. Part 2-5. Particular requirements for change-over selectors

GOST IEC 61195-2012: Double-capped fluorescent lamps. Safety specifications

GOST IEC 61199-2011: Single-capped fluorescent lamps. Safety specifications

GOST IEC 61210-2011: Connecting devices. Flat quick-connect terminations for electrical copper conductors. Safety requirements

GOST IEC 61241-10-2011: Electrical apparatus for use in the presence of combustible dust. Part 10. Classification of areas where combustible dusts are or may be present

GOST IEC 61241-14-2011: Electrical apparatus for use in the presence of combustible dust. Part 14. Selection and installation

GOST IEC 61439-5-2013: Low-voltage switchgear and control gear assemblies. Part 5. Assemblies for power distribution in public networks

GOST IEC 61557-3-2013: Low voltage distribution systems up to 1000 V a. c. and 1500 V d. c. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 3. Loop impedance

GOST IEC 61558-2-7-2012: Safety of power transformers, power supplies. Part 2-7. Particular requirements and test for transformers and power supplies for toys

GOST IEC 62040-1-2013: Uninterruptible power systems (UPS). Part 1. General and safety requirement for UPS

GOST IEC 62208-2013: Enclosures for low-voltage switchgear and control gear assemblies. General requirements

GOST IEC/PAS 62569-1-2014: Generic specification of information on products. Part 1. Principles and methods

GOST IEC/TR 61912-2-2013: Low-voltage switchgear and control gear. Overcurrent protective devices. Part 2. Selectivity under over-current condition

GOST ISO 10272-1-2013: Microbiology of food and animal feeding stuffs. Methods for detection and enumeration of Campylobacter spp. Part 1. Detection method

GOST ISO 105-A03-2002: Textile materials. Determination of color fastness. Part A03. Gray scale for assessing the degree of shading

GOST ISO 10727-2013: Tea and instant tea. Determination of caffeine content. Method using high-performance liquid chromatography

GOST ISO 11009-2013: Petroleum products and lubricants. Determination of water washout resistance of lubricating greases

GOST ISO 11089-2013: Raw synthetic rubber. Determination of antidegradants by high-performance liquid chromatography method

GOST ISO 1138-2013: Rubber compounding ingredients. Carbon black. Determination of total sulphur content

GOST ISO 1304-2013: Rubber compounding ingredients. Carbon black. Determination of iodine adsorption number

GOST ISO 13757-2013: Liquefied petroleum gases. Determination of oily residues. High-temperature method

GOST ISO 1437-2013: Rubber compounding ingredients. Carbon black. Determination of sieve residue

GOST ISO 17491-4-2012: Occupational safety standards system. Protective clothing providing protection from chemicals. Part 4. Method for determination of resistance to penetration by a spray of liquid (spray test)

GOST ISO 1841-2-2013: Meat and meat products. Potentiometric method for determination of chloride content

GOST ISO 2007-2013: Unvulcanized rubber. Rapid method for determination of plasticity by plastimeter

GOST ISO 20837-2013: Microbiology of food and animal feeding stuffs. Polymerase chain reaction (PCR) for the detection of food-borne pathogens. Requirements for sample preparation for qualitative detection

GOST ISO 21527-1-2013: Microbiology of food and animal feeding stuffs. Method for the enumeration of yeasts and moulds. Part 1. Colony count technique in products with water activity greater than 0,95

GOST ISO 21527-2-2013: Microbiology of food and animal feeding stuffs. Horizontal method for the enumeration of yeasts and moulds. Part 2. Colony count technique in products with water activity less than or equal 0,95

GOST ISO 21871-2013: Microbiology of food and animal feeding stuffs. Most probable number count and detection method for Bacillus cereus

GOST ISO 2322-2013: Styrene-butadiene rubber (SBR) emulsion- and solution- polymerized types. Evaluation methods

GOST ISO 247-2013: Rubber. Determination of ash

GOST ISO 2475-2013: Chloroprene rubber (CR). Evaluation methods

GOST ISO 2531-2012: Ductile iron pipes, fittings, accessories and their joints for water or gas applications. Specifications

GOST ISO 29941-2013: Mechanical contraceptives. Natural rubber latex condoms. Determination of nitrosamines content

GOST ISO 4097-2013: Rubber, ethylene-propylene-diene (EPDM). Evaluation methods

GOST ISO 5530-1-2013: Wheat flour. Physical characteristics of doughs. Part 1. Determination of water absorption and rheological properties using farinograf

GOST ISO 6530-2012: Occupational safety standards system. Protective clothing for protection against liquid chemicals. Method for determination of materials resistance to liquids penetration

GOST ISO 6734/IDF 15-2012: Sweetened condensed milk. Determination of total solids content (reference method)

GOST ISO 7218-2015: Microbiology of food and animal feed. General requirements and guidance for microbiological examinations

GOST ISO 7781-2013: Raw styrene-butadiene rubber. Determination of soap and organic-acid content

GOST ISO 8528-12-2011: Reciprocating internal combustion engine driven alternating current generating sets. Part 12. Emergency power supply to safety services

GOST ISO 8528-6-2011: Reciprocating internal combustion engine driven alternating current generating sets. Part 6. Test methods

GOST ISO 8681-2013: Petroleum products and lubricants. Method of classification. Definition of classes

GOST ISO/IEC 15420-2010: Automatic identification. Bar coding. EAN/UPC bar code symbology specification

GOST ISO/IEC Guide 65-2012: General requirements for bodies operating product certification systems

GOST ISO/TS 10272-2-2013: Microbiology of food and animal feeding stuffs. Methods for detection and enumeration of Campylobacter spp. Part 2. Colony-count technique

GOST MEK 60335-2-23-2009: Household and similar electrical appliances. Safety. Part 2-23. Particular requirements for appliances for skin or hair

GOST MEK 60335-2-26-2008: Household and similar electrical appliances. Safety. Part 2-26. Particular requirements for clocks

GOST MEK 60335-2-31-2010: Household and similar electrical appliances. Safety. Part 2-31. Particular requirements for range hoods and other cooking fume extractors

GOST MEK 60335-2-3-2009: Household and similar electrical appliances. Safety. Part 2-3. Particular requirements for electric irons

GOST MEK 60335-2-35-2009: Household and similar electrical appliances. Safety. Part 2-35. Particular requirements for instantaneous water heaters

GOST MEK 60335-2-41-2009: Household and similar electrical appliances. Safety. Part 2-41. Particular requirements for pumps

GOST R 1.0-2012: Standardization in the Russian Federation. Basic provisions

GOST R 1.1-2013: Standardization in the Russian Federation. Technical committees for standardization. Rules of organization and function

GOST R 1.8-2011: Standardization in Russian Federation. Interstate standards. Rules of developing, application, renovation and cease of application in the Russian Federation

GOST R 52069.0-2013: Safety of information. System of standards. Basic principles

GOST R 55390-2012: System of national standards for quality of telecommunication services. Structure and composition

GOST R 56086.1-2014: System of national standards of social accountability of telecommunication companies. General provisions

GOST R 56157-2014: Soil. Procedures (methods) of analysis of composition and properties of soil samples. General requirements for development

MI 3269-2010: Recommendation. State system for ensuring uniformity of measurements. Construction, presentation, design and content of documents on methods (methods) of measurement

MSN 10-01-2012: System of interstate normative documents in construction. Basic principles

ODM 218.3.091-2017: Recommendations on the rules of use, installation and operation of barrier road barriers with a separable beam on public roads

ODM 218.6.018-2016: Recommendations on the rules for the use, arrangement and operation of cable and combined road fences on public roads

PMG 92-2009: The metrological expert evaluation of interstate and national standarts projects

R 50.1.004-2011: Preparation of interstate standards for adoption and application in the Russian Federation as national standards

RD 50-1.636-87: Guidelines. State system for ensuring uniformity of measurements. The order of development of methods for the qualification assessment of fuels, oils, lubricants and special fluids

RD 52.18.28-2014: Rules for the development, approval, updating and cancellation of Roshydromet regulatory documents

RD 52.18.617-2015: Organization and order of conducting the monitoring

RMG 101-2010: State system for ensuring the uniformity of measurements. Petroleum quantity and parameters of quality measurements systems. Metrological and technical specifications to the designing

RMG 102-2010: Conformity assessment (confirmation) modules and certification schemes

RMG 103-2010: State system for ensuring the uniformity of measurements. Proficiency testing of test (measurement) laboratories, conducting the tests of substances, materials and environmental objects (for composition and physico-chemical properties) by means of interla

RMG 104-2010: State system for ensuring the uniformity of measurements. Oil. The residual maintenance of gas. Procedure of measurements

RMG 105-2010: State system for ensuring the uniformity of measurements. Vertical steel cylindrical tanks with thermal insulation. Procedure of verification bi geometrical method

RMG 108-2011: State system for ensuring the uniformity of measurements. Verticil reinforced-concrete tanks. Procedure of verification by volumetric method

RMG 109-2011: State system for ensuring the uniformity of measurements. Oil. Sampling from the pipelines

RMG 116-2011: State system for ensuring the uniformity of measurements. Tanks of main oil lines and oil storage depots. Maintenance operations and metrological assurance under operating conditions

RMG 29-2013: State system for ensuring the uniformity of measurements. Metrology. Basic terms and definitions

RMG 59-2003: State system for ensuring the uniformity of measurements. Checking of the availability of reagents out of the guaranty storage period for using in laboratory by method of internal laboratory control of test results accuracy

RMG 76-2004: State system for ensuring the uniformity of measurements. Internal control of quantitative chemical analysis result's accuracy

RMG 76-2014: State system for ensuring the uniformity of measurements. Internal control of quantitative chemical analysis result's accuracy

RMG 89-2010: State system for ensuring the uniformity of measurements. Acceptance point of oil. Metrological and technical assurance

RMG 93-2009: State system for ensuring the uniformity of measurements. Estimation of metrological characteristics of reference materials

RMG 94-2009: State system for ensuring the uniformity of measurements. Test laboratories performing of the quality control of oil at acceptance operations. Basic requirements

RMG 99-2010: State system for ensuring the uniformity of measurements. Procedure of metrological and technical ensuring of operation of measuring systems for oil quantity and quality metrics, pipe-piston calibration setup and measuring instruments as their components

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Unified system for design documentation. Types and sets of design documentation
Language: English
Price: $139.00
imgalt
Loads and impacts
Language: English
Price: $306.00
imgalt
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English
Price: $311.00
imgalt
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English
Price: $333.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!