GOST 13015-2012

ГОСТ 13015-2012

Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage

Изделия бетонные и железобетонные для строительства. Общие технические требования. Правила приемки, маркировки, транспортирования и хранения

Status: Effective - Supersedes. IUS 5-2014

This standard applies to concrete and reinforced concrete products for building structures (hereinafter - products) manufactured from all types of concrete specified in GOST 25192. The standard establishes the main characteristics of products, general technical requirements for them, general rules for acceptance, marking, transportation and storage. The requirements of this standard should be taken into account when developing standards for specific types of products, as well as when developing technical specifications and (or) working drawings as part of working documents. on non-standardized products

Настоящий стандарт распространяется на бетонные и железобетонные изделия для строительных конструкций (далее - изделия), изготовляемые из всех видов бетонов, приведенных в ГОСТ 25192.Стандарт устанавливает основные характеристики изделий, общие технические требования к ним, общие правила приемки, маркировки, транспортирования и хранения.Требования настоящего стандарта должны учитываться при разработке стандартов на изделия конкретных видов, а также при разработке технических условий и (или) рабочих чертежей в составе рабочей документации на нестандартизованные изделия

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 34

Approved: Federal Agency for Technical Regulation and Metrology, 12/27/2012

SKU: RUSS69521

Price: $420.01




The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Documents System of normative documents in construction » 5. Regulatory documents for building structures and products » k.52 Reinforced concrete and concrete structures »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 002/2011 TR TS. On safety of high-speed rail » Regulations and standards (to TR CU 002/2011) »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 003/2011 TR TS. On safety of railway infrastructure » Regulations and standards (for TR CU 003/2011) »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.100 Building Materials » 91.100.30 Concrete and concrete products »

National standards » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.100 Building Materials » 91.100.30 Concrete and concrete products »

National Standards for KGS (State Standards Classification) » Latest edition » Zh Construction and building materials » Zh1 Construction materials » Zh13 Concretes and mortars »


As a Replacement Of:

GOST 13015-2003: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage

The Document References:

GOST 10060-2012: Concretes. Methods for the determination of frost-resistance

GOST 10180-2012: Concretes. Methods for strength determination using reference specimens

GOST 10922-90: Welded reinforcing products and inserts, welded joints of reinforcement and inserts for reinforced concrete structures. General specifications

GOST 12730.1-78: Concretes. Methods of determination of density

GOST 12730.2-78: Concretes. Method of determination of moisture content

GOST 12730.3-78: Concretes. Method of determination of water absorption

GOST 12730.4-78: Concretes. Methods of determination of porosity parameters

GOST 13087-81: Concretes. Method of abrasion test

GOST 14192-96: Cargo marking

GOST 17623-87: Concrete. Radioisotope method of average density determination

GOST 17624-2012: Concrete. Ultrasonic method of strength determination

GOST 17625-83: Reinforced concrete structures and units. Radioactive method of determination of concrete protective covering thickness, reinforcement dimensions and arrangement

GOST 18105-2010: Concretes. Rules of control and norm of an assessment of quality.

GOST 20910-90: Refractory concretes. Specifications

GOST 21779-82: System of ensuring of geometrical parameters accuracy in construction. Manufacturing and assembling tolerances

GOST 22362-77: Reinforced concrete structures. Methods for determination of reinforcement tensioning force

GOST 22904-93: Reinforced concrete structures. Magnetic method for determining the thickness of the protective layer of concrete and the location of reinforcement

GOST 23279-85: Welded reinforcing meshes for reinforced concrete structures and products. General specifications

GOST 23616-79: System of ensuring of geometrical accuracy of parameters in construction. Control of accuracy

GOST 23858-79: Welded joints butt and T-formed of reinforcement steel bars. Ultrasonic methods of quality inspection. Acceptability requirements

GOST 25192-2012: Concretes. Classification and general technical requirements

GOST 25214-82: Dense silicate concrete. Technical requirements

GOST 25246-82: Chemically resistant concretes. Specifications

GOST 25485-89: Cellular concretes. Specifications

GOST 25820-2000: Lightweight aggregates concretes. Specifications

GOST 25898-83: Building materials and products. Methods of steam-tightness determination

GOST 26433.1-89: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. Prefabricated elements

GOST 26633-2012: Heavy-weight and sand concretes. Specifications

GOST 27005-86: Light-weight and cellular concretes. Rules of average density control

GOST 27006-86: Concretes. Rules for mix proportioning

GOST 27296-87: Sound insulation of enclosing structures

GOST 28574-90: Corrosion protection in construction. Concrete and reinforced concrete constructions. Methods of the protection covers adhesion testing

GOST 28575-90: Corrosion protection in construction. Concrete and reinforced concrete constructions. Test of protection covers from steam penetration

GOST 30108-94: Building materials and elements. Determination of specific activity of natural radioactive nuclei

GOST 30247.1-94: Elements of building constructions. Fire-resistance test methods. Load bearing and separating constructions

GOST 30403-96: Building structures fire hazard test method

GOST 535-2005: Common quality carbon steel bar and shaped sections. General specifications

GOST 7076-99: Building materials and products. Method of determination of steady-state thermal conductivity and thermal resistance

GOST 7473-2010: Fresh concrete. Specifications

GOST 8829-94: Reinforced concrete and prefabricated concrete building products. Loading test methods. Assesment of strength, rigidity and crack resistance

GOST 12730.5-84: Concretes. Methods for determination of water tightness

GOST 22690-88: Concretes. Determination of strength by mechanical methods of nondestructive testing

The Document is Referenced By:

GOST 12504-2015: Concrete and reinforced concrete panels for internal walls of residential and civil buildings. General specifications

GOST 12767-2016: Reinforced concrete solid slabs for floors in lange-panel buildings. General specifications

GOST 13579-2018: Сoncrete blocks for walls of basements. Specifications

GOST 17538-2016: Reinforced concrete constructions and products for lift shafts of residential buildings. Specification

GOST 17608-2017: The concrete paving slabs. Specifications

GOST 18048-2018: Reinforced сoncrete sanitary cabins. Specifications

GOST 18979-2014: Reinforced concrete columns for multi-storey buildings. Specification

GOST 18980-2015: Reinforced concrete collar beams for multistory buildings. Specifications

GOST 19330-2013: Masts (poles) for overhead contact line supports of railways. Specifications

GOST 20054-2016: Concrete non-pressure pipes. Specifications

GOST 20213-2015: Reinforced concrete roof trusses. Specifications

GOST 20372-2015: Reinforced concrete rafter and longitudinal beams. Specifications

GOST 21.501-2018: System of design documents for construction. Rules for execution of the working documentation of architectural and construction solutions

GOST 21506-2013: Reinforced concrete ribbed floor slabs of 300 mm depth for buildings and structures. Specifications

GOST 22131-2016: Concrete towers for railway high voltage signal line of autoblock. Technical requirements

GOST 23009-2016: Prefabricated concrete and reinforced concrete constructions and products. Symbols (marks)

GOST 24155-2016: High passengers platform reinforced concrete structures. Specifications

GOST 24547-2016: Reinforced concrete culvert sections under highway and railway embankments. Specifications

GOST 24893-2016: Reinforced concrete frame brace for industrial buildings. Specifications

GOST 25098-2016: Reinforced concrete panels for partitions in industrial and agricultural buildings. Specifications

GOST 25628.1-2016: Reinforced concrete columns for single-storey industrial buildings. Specifications

GOST 25628.2-2016: Columns of reinforced concrete frame-free for single-stored buildings of enterprises. Specification

GOST 25628.3-2016: Columns of reinforced concrete with frame for single-stored buildings of enterprises. Specification

GOST 25697-2018: Reinforced concrete slabs for balconies and loggias. General specifications

GOST 25820-2014: Lightweight aggregates concretes. Specifications

GOST 25912-2015: Prestressed reinforced concrete slabs for aerodrome pavement. Specifications

GOST 26434-2015: Reinforced concrete panels for floors in residential buildings. Types and basic parameters

GOST 26633-2012: Heavy-weight and sand concretes. Specifications

GOST 26633-2015: Heavy-weight and sand concretes. Specifications

GOST 26653-2015: Preparation of general cargoes for transportation. General requirements

GOST 26992-2016: Reinforced purloins for roofing in industrial and agricultural buildings. Specifications

GOST 27005-2014: Light-weight and cellular concretes. Rules for control and assessment density

GOST 27108-2016: Frame structures of reinforced concrete, prefabricated for multi-stored buildings with beams. Specification

GOST 27215-2013: Reinforced concrete ribbed floor slabs of 400 mm depth for industrial buildings. Specifications

GOST 28042-2013: Reinforced concrete roofing slabs for industrial buildings. Specifications

GOST 28574-2014: Corrosion protection in construction. Concrete and reinforced concrete constructions. Methods of the protection covers adhesion testing

GOST 28737-2016: Reinforced concrete foundation beams for buildings walls of industrial and agricultural enterprises. Specifications

GOST 31310-2015: Wall three-layer reinforced concrete panels with energy-efficient insulation. General specifications

GOST 32209-2013: Reinforced for overhead contact line supports оf railways. Specifications

GOST 32488-2013: Exterior wall panels of claydite-concrete for residential and public buildings. Specificatiоns

GOST 32499-2013: Reinforced concrete multihollow slabs for floors in buildings for span to 9 m stand moulding. Specifications

GOST 32803-2014: Self-stressing concrete. General specifications

GOST 32947-2014: Automobile roads of general use. Supports of stationary electric lighting. Technical requirements

GOST 32948-2014: Automobile roads of general use. Supports of road signs. Technical requirements

GOST 32955-2014: Public roads. Trays for road drainage. Technical specifications

GOST 32961-2014: Automobile roads of general use. Kerb units. Technical requirements

GOST 33119-2014: Polymer composites constructions for foot-bridges. Specifications

GOST 33126-2014: Expanded clay concrete blocs. Specifications

GOST 33320-2015: Ferro-concrete cross ties for railways. General specifications

GOST 33376-2015: Polymer composite deck sections for pedestrian and highway bridges and overbridges. General specifications

GOST 33929-2016: Concrete with polysterene aggregates. Specifications

GOST 34027-2016: Gas supply system. Gas main pipeline transportation. Mechanical safety. Assigning of safe operation life for linear part of gas main pipeline

GOST 6482-2011: Ferroconcrete nonpressure pipes. Technical specifications.

GOST 6927-2018: Сoncrete slabs for wall facing. Technical requirements

GOST 8020-2016: Concrete and reinforced concrete structures for man-holes of sewerage, water supply and gas supply pipeline systems. Specification

GOST 8717-2016: Concrete and reinforced concrete steps. Specification

GOST 948-2016: Reinforced concrete jumpers for buildings with brick walls. Specification

GOST 9561-2016: Reinforced concrete multihollow panels for floors in buildings. Specifications

GOST 9574-2018: Gypsum сoncrete panels for partitions. Specifications

GOST 9818-2015: Reinforced concrete flights of steps and stair landings. General specifications

GOST R 56589-2015: Claydite-concrete heating main chutes. Specifications

GOST R 56591-2015: Expanded claydite-plaster blocks. Specifications

GOST R 56600-2015: Reinforced concrete prestressed slabs for pavements of roads. Specifications

GOST R 56944-2016: Cranes. Overhead crane railway. General specifications

GOST R 57255-2016: Photo catalytic self-cleaning concrete. Specifications

GOST R 57992-2017: Trunk pipeline transport of oil and oil products. Cast iron ballast units. General specifications

GOST R 57993-2017: Trunk pipeline transport of oil and oil products. Concrete ballast units. General specifications

GOST R 58323-2018: Reinforced concrete pipes for trenchless laying of engineering networks. Technical conditions

ODM 218.2.055-2015: Recommendations for the calculation of drainage systems for road structures

ODM 218.2.075-2016: Guidelines for the use of structural composite grids and gratings instead of steel when used to strengthen the arches of tunnels and retaining walls by the method of gunning

ODM 218.2.078-2016: Guidelines for the selection of the structure for strengthening the slopes of the road bed of public roads

ODM 218.3.083-2016: Guidelines for trenchless laying of road culvert pipes

ODM 218.3.093-2017: Methodical recommendations on the use of a polyurethane binder for strengthening slopes, recesses, bulk structures, cones of bridges and overpasses

ODM 218.3.095-2017: Corrosion protection of concrete and reinforced concrete structures of transport facilities

PNST 105-2016: Sulfur concrete mixtures and sulfur concrete. General specifications

PNST 320-2018: Bearing structures of railway signaling devices. General technical requirements

RMD 32-18-2012 Sankt-Peterburg: Recommendations for the use of paving in the paving of residential and public business areas

RMD 32-24-2015 Sankt-Peterburg: Design of artificial structures at transport facilities in St. Petersburg

SP 25.13330.2012: Soil bases and foundations on permafrost soils

SP 27.13330.2017: Concrete and reinforced concrete structures intended for the service in elevated and high temperatures

SP 287.1325800.2016: Marine berthing facilities. Rules of design and construction

SP 31.13330.2012: Water supply. Pipelines and portable water treatment plants

SP 339.1325800.2017: Designs from cellular concrete. Rules of design

SP 363.1325800.2017: Translucent coating and lights of buildings and structures. Desing rules

SP 387.1325800.2018: Spatial reinforced concrete structures of roofs and floors. Design requirements

SP 40.13330.2012: Concrete and reinforced concrete dams

SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.

SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87

SP 72.13330.2016: Protection of buildings, facilities and structures against corrosion

SP 76.13330.2016: Electrical systems

SP 78.13330.2012: Automobile roads

SP 80.13330.2016: River hydraulie engineering facilities

SP 95.13330.2016: Concrete and reinforced concrete structures made of dense calcium-silicate concrete

SP 96.13330.2016: Ferrocement structures

TU 5859-002-59565714-2012: Concrete protective flexible universal slabs

GOST 13578-2019: Lightweight concrete panels on porous aggregates for the exterior walls of industrial buildings. General specifications

GOST 18105-2018: Concrete Rules for control and strength assessment

GOST 19222-2019: Arbolit and products from it. General specifications

GOST 19570-2018: Panels made of autoclaved aerated concrete for floors of residential and public buildings. Technical specifications

GOST 20910-2019: Concrete is heat-resistant. Technical specifications

GOST 25485-2019: Cellular concrete. General specifications

GOST 8829-2018: Prefabricated reinforced concrete and concrete products. Load test methods. Rules for evaluating strength, stiffness and crack resistance

GOST R 58277-2018: Dry mixes for building on cement binder. Test methods

GOST R 58387-2019: Glue anchors for fastening in concrete. Test methods

GOST R 58411-2019: Flexible concrete slabs. Technical specifications

ODM 218.2.058-2019: Recommendations on the use of composite materials in the construction of bridge structures and pedestrian bridges

ODM 218.3.106-2018: The use of flexible concrete surface coatings to protect and strengthen roads

ODM 218.6.031-2018: Guidelines for improving the reliability of protective and fortifications in emergency situations and natural hazards

ODM 218.8.011-2018: Guidelines for determining the characteristics and selection of noise protection structures of roads

SP 130.13330.2018: Production of prefabricated reinforced concrete structures and products

SP 335.1325800.2017: Large-panel construction system. Design rules

SP 351.1325800.2017: Concrete and reinforced concrete designs from light concrete. Rules of design

SP 355.1325800.2017: Frame construction prefabricated reinforced concrete one-storey industrial buildings. Rules of design

SP 356.1325800.2017: Prefabricated reinforced concrete frame constructions multi-storey buildings. Rules of design

SP 414.1325800.2018: Fixed formwork. Design rules

SP 434.1325800.2018: Polystyrene concrete enclosures. Design rules

SP 63.13330.2018: Concrete and reinforced concrete structures. Key Points

STO 64235108-008-2016: Easily removable KL covers. General requirements

Customers Who Viewed This Item Also Viewed:

Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
Language: English
Price: $262.35
Locomotive and motor rolling stock. Requirements of fire safety
Language: English
Price: $305.50
Unified system of design documentation. Operational documents
Language: English
Price: $610.13
Unified system of design documentation. Rules for the implementation of operational documents
Language: English
Price: $752.72
Noise. Admissible levels of noise in houses and public buildings
Language: English
Price: $7.52
System of building design document. Pipelines. Symbols for presentation
Language: English
Price: $10.89
Electrical equipment for a.c. voltages from 1 to 750 kV. Requirements for dielectric strength of insulation
Language: English
Price: $267.30
Electrical articles. General requirement for environment mechanical stability
Language: English
Price: $28.20
Machines for the pulp and paper industry
Language: English
Price: $207.58
Unified system for design documentation. Rules for making exploitative documents
Language: English
Price: $183.15
Electrical insulation system. Thermal evalution and classification
Language: English
Price: $54.45
Fire hazard of textiles. Decorative textiles. Flammability test method and classification
Language: English
Price: $49.50
Loads and impacts
Language: English
Price: $338.40
Direct-acting safety valves. General specifications
Language: English
Price: $346.50
Technical regulations of Customs Union. On the safety of agricultural and forestry tractors and trailers
Language: English
Price: $98.40
Seamless cold-deformed pipes from alloys based on titanium. Specifications
Language: English
Price: $147.44
Flame arrestors and spark arrestors. General technical requirements. Test methods
Language: English
Price: $128.70
Production conditions analysis for product attestation
Language: English
Price: $285.18
Vibration. Technological equipment of pulp and paper production. Protection methods and means
Language: English
Price: $299.73
Steel. Methods of test and estimation of macrostructure
Language: English
Price: $148.50

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message live-chat-up-arrow live-chat-down-arrow

Leave your message in the form below, and we will write back by e-mail!