GOST 24997-2004
ГОСТ 24997-2004
|
|
Gauges for metric thread. Tolerances
Калибры для метрической резьбы. Допуски
Status: Effective
The standard applies to threaded and smooth gauges for metric threads with a profile according to GOST 9150, diameters and steps according to GOST 8724 and GOST 16967, basic dimensions according to GOST 24705 and GOST 24706 and tolerances according to GOST 16093, GOST 4608, GOST 24834 IGOST 11709.
Стандарт распространяется на резьбовые и гладкие калибры для метрической резьбы с профилем по ГОСТ 9150, диаметрами и шагами по ГОСТ 8724 и ГОСТ 16967, основными размерами по ГОСТ 24705 и ГОСТ 24706 и допусками по ГОСТ 16093, ГОСТ 4608, ГОСТ 24834 иГОСТ 11709.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
3/2/2005
SKU: RUSS69547
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
3 Activities of testing laboratories »
3.2 Technical equipment of testing laboratories »
3.2.2 Measuring instruments and test equipment »
3.2.2.6 Instruments, tools and devices for linear, angular, profile and spatial measurements »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.040 Linear and angular measurements »
17.040.30 Measuring instruments »
National standards »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.040 Linear and angular measurements »
17.040.30 Measuring instruments »
ISO classifier »
21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES »
21.040 Screw threads »
21.040.10 Metric threads »
National standards »
21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES »
21.040 Screw Threads »
21.040.10 Metric threads »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G1 General parts and units of machines »
G13 Threads »
As a Replacement Of:
GOST 24997-81: Gauges for metric threads. Tolerances
The Document References:
GOST 1.0-92: State System for Standardization of Russian Federation. Basic principles
GOST 1.2-97: Interstate system for standardization. Interstate standards, rules and recommendations on interstate standardization. Procedure for development, taking over application, renovation and cancellation
GOST 11709-81: Metric screw threads in the range 1-180 mm diameters for the parts in plastics. Profile, basic dimensions and tolerances
GOST 16093-2004: Basic norms of interchangeability. Metric screw thread. Tolerances. Clearance fits
GOST 16967-81: Basic norms of interchangeability. Metric thread for instrument-making industry. Diameters and pitches
GOST 2016-86: Thread gauges. Specifications
GOST 24705-2004: Вasic norms of interchangeability. Metric screw thread. Basic dimensions
GOST 24706-81: Basic norms of interchangeability. Metric thread for instrument-making industry. Basic dimensions
GOST 24834-81: Basic norms of interchangeability. Metric screw thread. Transition fits
GOST 24939-81: Gauges for parallel threads. Types
GOST 24997-81: Gauges for metric threads. Tolerances
GOST 4608-81: Basic norms of interchangeability. Metric screw thread. Interference fits
GOST 8724-2002: Basic norms of interchangeability. Metric screw threads. General plan
GOST 9150-2002: Basic norms of interchangeability. Metric screw threads. Profile
The Document is Referenced By:
GOST 11532-2014: Nuts for rail joints. Specifications
GOST 12.4.166-2018: Occupational safety standards system. Respiratory protective devices. Facepiece. General specifications
GOST 12.4.238-2015: Occupational safely standards system. Closed-circuit breathing apparatus compressed air type. Requirements, testing, marking. Simples selection rules
GOST 12393-2013: Line fittings for overhead system of railways. General common requirements
GOST 12393-2019: Rail contact network fittings linear. General specifications
GOST 16016-2014: Clamp bolts for rail track fastenings. Specifications
GOST 16017-2014: Inserted bolts for rail track fastenings. Specifications
GOST 16018-2014: Nuts for clamp and inserted bolts of rail track fastenings. Technical specifications
GOST 16093-2004: Basic norms of interchangeability. Metric screw thread. Tolerances. Clearance fits
GOST 1759.1-82: Bolts, screws, studs and nuts. Tolerance, monitoring methods of dimensions and deviations of shape and surface orientation
GOST 2016-86: Thread gauges. Specifications
GOST 26862-86: Rins. General specifications
GOST 33721-2016: Head sets of electric drives, external contactors for switches. Safety requirements and methods of checking
GOST 33752-2017: Steel welded cylinders for liquefied hydrocarbon gas, used as motor fuel on automotive vehicle. Specifications
GOST 33983-2016: Fire fighting equipment. Personal protective equipment for firefighters. Breathing apparatus with compressed air. General technical requirements. Test methods
GOST ISO 3269-2015: Fasteners. Acceptance inspection
GOST ISO 4042-2015: Fasteners. Electroplated coatings
GOST R 12.4.186-2012: Occupational safety standards system. Respiratory individual protective devices. Closed-circuit breathing apparatus compressed air type. Technical requirements. Test methods. Marking. Simples selection rules
GOST R 12.4.276-1-2012: Occupational safety standards system. Respiratory protective devices. Compressed air line supply breathing apparatus. Part 1. Apparatus with a full face mask. Technical requirements. Test methods. Marking
GOST R 12.4.276-2-2012: Occupational safety standards system. Respiratory protective devices. Compressed air line supply breathing apparatus. Part 2. Apparatus with half mask at positive pressure. Requirements. Test methods. Marking
GOST R 53255-2009: Fire equipment. Self-contained open-circuit compressed air breathing apparatus. General technical requirements. Test methods
GOST R 53255-2019: Fire fighting equipment. Breathing apparatus with compressed air with an open breathing cycle. General technical requirements. Test methods
GOST R 53257-2009: Fire equipment. Full face masks breathing apparatus. General technical requirements. Test methods
GOST R 53258-2009: Fire equipment. The small size cylinders for apparatuses breathing and self-contained escape with compressed air. General technical requirements. Test methods
GOST R 55085-2012: Cylinders steel welded on pressure 1,6 MPа for liquefied hydrocarbon gas, used as motor fuel on car transport facility. Specifications
GOST R 70407-2022: Flexible sanitary and technical water supply line. Specifications
GOST R 8.677-2009: State system for ensuring the uniformity of measurements. Cylindrical thread gauges. Verification procedure
GOST R ISO 3269-2009: Fasteners. Acceptance inspection
GOST R ISO 4042-2009: Fasteners. Electroplated coatings
MI 2077-90: Micrometers with inserts
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.