GOST 25.503-97

ГОСТ 25.503-97

Design calculation and strength testing. Methods of mechanical testing of metals. Method of compression testing

Расчеты и испытания на прочность. Методы механических испытаний металлов. Метод испытания на сжатие

Status: Effective

The standard establishes methods of static compression tests at a temperature of 20 (15-10) degrees. C to determine the mechanical properties of ferrous and non-ferrous metals and alloys.

Стандарт устанавливает методы статических испытаний на сжатие при температуре 20 (+15-10) град. С для определения характеристик механических свойств черных и цветных металлов и сплавов.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 28

Approved: Gosstandart of Russia, 6/30/1998

SKU: RUSS69548

Price: $371.00




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 77 Metallurgy »

Standards for pipe fittings (TPA) » 10. Production » 10.8 Material Testing »

Standards for pipe fittings (TPA) » 9. Materials for piping valves (TPA) » 9.1 Metals »

Standards for pipe fittings (TPA) » 8. Piping valves (TPA) design » 8.2 Calculations » 8.2.1 Strength calculations »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 2 Tests for external factors » 2.2 Testing of manufacturing products »

ISO classifier » 77 METALLURGY » 77.040 Metal Testing » 77.040.10 Mechanical testing of metals »

National standards » 77 METALLURGY » 77.040 Metal Testing » 77.040.10 Mechanical testing of metals »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V0 General rules and regulations on metallurgy » V09 Test methods. Packaging. Marking »

National Standards for OKSTU » SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS » Unified System of State Product Quality Management (ESGUKP) »


As a Replacement Of:

GOST 25.503-80: Strength calculation and testing. Methods of mechanical testing of metals compression test method

The Document References:

GOST 1497-84: Metals. Methods of tension test

GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions

GOST 18957-73: Tensometers for measurements of linear deformations of building materials and structures. General technical requirements

GOST 28840-90: Machines for tension, compression and bending tests of materials

The Document is Referenced By:

GOST 28840-90: Machines for tension, compression and bending tests of materials

GOST 30776-2002: Oil field mobile pumping units. General specifications

GOST 32680-2014: Head current collection elements of pantographs of electric vehicle. General specification

GOST R 55043-2012: Non-destructive testing. Evaluation of elastic-acoustic coefficients. General requirements

GOST R 57910-2017: Materials for additive process. Control and tests methods

GOST R 58419-2019: Additive technology. Products made of titanium alloys made by selective electron beam fusion. General specifications

Order 5214: The list of documents in the field of standardization, the application of which on a voluntary basis to ensure compliance with the requirements of application and execution of the Government of the Russian Federation of October 29, 2010 № 870 "On approval of technical regulations on the safety of gas distribution and gas consumption networks" (as amended on June 23, 2011) and implementation of conformity assessment

Order 5214: On approval of the List of documents in the field of standardization, the application of which on a voluntary basis to ensure compliance with the requirements of technical regulations "On safety of gas distribution and gas consumption networks" approved by the Government of the Russian Federation on October 29, 2010 N 870 (as amended on April 22, 2013) (lost force from 01.04.2022 on the order of Rosstandart from 10.01.2022 N 3)

PNST 310-2018: Roads are public. Bridges and pipes road. Methods for determining the geometric and physical parameters

RB 155-20: Safety Guide for the Use of Atomic Energy "Recommendations on the Procedure, Volume, Methods and Means of Control of Radioactive Waste to Confirm its Compliance with the Acceptance Criteria for Disposal"

RD 22-16-2005*: Guiding regulatory material. Hoisting machines. Selection of materials for the manufacture, repair and reconstruction of welded steel structures

SDA 24-2008: Rules for assessment (certification) of testing laboratories personnel

ST CKBA 125-2020: Pipe fittings. Types of control and testing

Customers Who Viewed This Item Also Viewed:

Special railway rolling stok. Dynamic and strength testing procedures
Language: English
Price: $198.00
Blanks for marine shafts and rudder stocks. Specifications
Language: English
Price: $216.00
Tempered glass. Specifications.
Language: English
Price: $149.00
Glass with low emissivity hard coating. Specifications.
Language: English
Price: $212.00
Glass laminated. Specifications.
Language: English
Price: $231.00

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!