GOST 31310-2005
ГОСТ 31310-2005
|
|
Wall three-layer reinforced concrete panels with energy-efficient insulation. General specifications
Панели стеновые трехслойные железобетонные с эффективным утеплителем. Общие технические условия
Status: Not effective - Superseded. Registration information 166-st dated 03/17/2016 (official site of Rosstandart); see IUS 8-2016
The standard applies to three-layer concrete and reinforced concrete panels with effective insulation for the external walls of residential, public and industrial buildings, made of heavy concrete or light concrete with porous aggregates. The standard establishes the classification, types, basic parameters of panels, general technical requirements for them, general rules for their acceptance, control methods, rules for transportation and storage. The standard does not apply to: - composite panels; - wall panels of rooms with wet mode; - filling window and door openings in the panels.
Стандарт распространяется на трехслойные бетонные и железобетонные панели с эффективными утеплителями для наружных стен жилых, общественных и производственных зданий, изготовляемые из тяжелого бетона или легкого бетона на пористых заполнителях. Стандарт устанавливает классификацию, типы, основные параметры панелей, общие технические требования к ним, общие правила их приемки, методы контроля, правила транспортирования и хранения. Стандарт не распространяется на: - составные панели; - панели стен помещений с мокрым режимом; - заполнения оконных и дверных проемов в панелях.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
4/26/2006
SKU: RUSS69572
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
5. Regulatory documents for building structures and products »
k.52 Reinforced concrete and concrete structures »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.060 Construction elements »
91.060.10 Walls. Partitions. Facades »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.060 Construction elements »
91.060.10 Walls. Partitions. Facades »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh3 Building structures and parts »
Zh33 Stone, brick, concrete and reinforced concrete structures and parts »
The Document is Replaced With:
GOST 31310-2015: Wall three-layer reinforced concrete panels with energy-efficient insulation. General specifications
The Document References:
GOST 1.0-92: State System for Standardization of Russian Federation. Basic principles
GOST 10060.0-95: Methods for the determination of frost-resistance. General requirements
GOST 10060.1-95: Concretes, Basic Method For The Determination Of Frost-Resistance
GOST 10060.2-95: Concretes, rapid method for the determination of frost-resistance by repeated alternated freezing and thawing
GOST 10060.3-95: Concretes. Dilatometric rapid method for the determination of frost-resistance
GOST 10060.4-95: Concretes. Structure-mechanical rapid method for the determination of frost-resistance
GOST 10180-90: Concretes. Methods for strength determination using reference specimens
GOST 10181-2000: Concrete Mixtures Test method
GOST 10499-95: Heat insulating products made of glass staples fibre. Technical requirements
GOST 10884-94: Thermomechanically hardened steel bars for reinforced concrete constructions. Specifications
GOST 10922-90: Welded reinforcing products and inserts, welded joints of reinforcement and inserts for reinforced concrete structures. General specifications
GOST 11024-84: Concrete and reinforced concrete panels for external walls of residential and civil buildings. General specifications
GOST 11214-2003: Windows of wood with glass. Specifications
GOST 12730.1-78: Concretes. Methods of determination of density
GOST 12730.2-78: Concretes. Method of determination of moisture content
GOST 12730.5-84: Concretes. Methods for determination of water tightness
GOST 13015-2003: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage
GOST 15588-86: Polystyrene foam boards. Specifications
GOST 16381-77: Thermal insulating building materials and products. Classification and general technical requirements
GOST 17623-87: Concrete. Radioisotope method of average density determination
GOST 17624-87: Concrete. Ultrasonic method of strength determination
GOST 18105-86: Concretes. Rules for the strength control
GOST 21519-2003: Windows of aluminium. Specifications
GOST 21718-84: Building materials. Dielectric method of measurement of moisture
GOST 21780-2006: System of ensuring the accuracy of geometrical parameters in construction. Accuracy calculation
GOST 21780-83: System of ensuring the accuracy of geometrical parameters in construction. Accuracy calculation
GOST 22690-88: Concretes. Determination of strength by mechanical methods of nondestructive testing
GOST 22950-95: Mineral wool slabs of higher rigidity on synthetic bond. Specifications
GOST 23009-78: Prefabricated concrete and reinforced concrete constructions and products. Symbols (marks)
GOST 23166-99: Windows. General specifications
GOST 23279-85: Welded reinforcing meshes for reinforced concrete structures and products. General specifications
GOST 23858-79: Welded joints butt and T-formed of reinforcement steel bars. Ultrasonic methods of quality inspection. Acceptability requirements
GOST 24700-99: Windows of wood with glassing units. Specifications
GOST 25097-2002: Windows from wood and aluminium. Specifications
GOST 25820-2000: Lightweight aggregates concretes. Specifications
GOST 26433.1-89: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. Prefabricated elements
GOST 26633-91: Heavy-weight and sand concretes. Specifications
GOST 27005-86: Light-weight and cellular concretes. Rules of average density control
GOST 28013-98: Mortars. General specifications
GOST 28089-89: Wall masonry constructions. Test method for bond strength of facing tiles with the base
GOST 28984-91: Modular size coordination in building engineering. Basic rules
GOST 30244-94: Building materials. Methods for combustibility test
GOST 30674-99: Windows of polyvinylchloride profiles. Specifications
GOST 30971-2002: Erection to joints of window assemblies adjoined to wall openings. General specifications
GOST 475-78: Wooden doors. General specifications
GOST 5781-82: Hot-rolled steel for reinforcement of ferroconcrete structures. Specifications
GOST 5802-86: Mortars. Test methods.
GOST 6727-80: Cold-drawn low-carbon steel wire for reinforced concrete. Specifications
GOST 7076-99: Building materials and products. Method of determination of steady-state thermal conductivity and thermal resistance
GOST 8829-94: Reinforced concrete and prefabricated concrete building products. Loading test methods. Assesment of strength, rigidity and crack resistance
GOST 9573-96: Thermal insulating plates of mineral wool on synthetic binder. Specifications
SNiP 10-01-94: System of normative documents in construction. Basic provisions.
SP 23-101-2004: Design of thermal protection of buildings
The Document is Referenced By:
GOST 32488-2013: Exterior wall panels of claydite-concrete for residential and public buildings. Specificatiоns
GOST 34378-2018: Translucent enclosing structures. Windows and doors. Installation work execution, check and demands for results of works
GOST R 54851-2011: Building envelope in similar. Calculation reduced total thermal resistances
GOST R 54923-2012: Polymer composite wall ties for multilayer envelope buildings. Specifications
SP 267.1325800.2016: High rise buildings and complexes. Design rules
SP 355.1325800.2017: Frame construction prefabricated reinforced concrete one-storey industrial buildings. Rules of design
SP 356.1325800.2017: Prefabricated reinforced concrete frame constructions multi-storey buildings. Rules of design
|
Customers Who Viewed This Item Also Viewed:
 |
Metals. Methods of tension test
Language: English |
Liquids for aircrafts systems. Method for determination thermo oxidizing stability and corrosion activity
Language: English |
Natural gas for industrial and municipal purposes. Technical conditions
Language: English |
Global navigation satellite system. Emergency response system in case of accidents. Test methods for emergency services call device/system for compliance with the requirements for the quality of loudspeaker communication in the vehicle cab.
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
