GOST R 54440-2011

ГОСТ Р 54440-2011

Heating boilers. Part 1. Heating boilers with forced draught burners. Terminology, general requirements, test and marking

Котлы отопительные. Часть 1. Отопительные котлы с горелками с принудительной подачей воздуха. Терминология, общие требования, испытания и маркировка

Status: Effective - Introduced for the first time. IUS 12-2012

This standard applies to heating boilers with forced-air burners that meet the requirements of standards (for burners for gaseous fuels according to GOST R 51383, for liquid fuels according to GOST 27824) with a rated thermal output of up to 1000 kW and a maximum operating temperature of 115 0С . The boilers are operated either with negative pressure (boilers with natural load) or with positive pressure (boilers with supercharging) in the combustion chamber according to the manufacturer’s instructions. This standard establishes the necessary terminology, requirements for materials and their testing, as well as labeling requirements for heating boilers. The requirements of this standard apply to heating boilers that have been tested in an approved test facility. This standard does not apply to gas boilers with atmospheric burners; solid fuel boilers; gas and fuel oil condensing boilers, as well as boilers with evaporative burners. Specifications for such boilers are considered separately.

Настоящий стандарт распространяется на отопительные котлы с горелками с принудительной подачей воздуха, соответствующих требованиям стандартов (на горелки для газообразного топлива - по ГОСТ Р 51383, для жидкого топлива - по ГОСТ 27824), с номинальной тепловой мощностью до 1000 кВт и максимальной рабочей температурой 115 0С. Котлы эксплуатируются либо с отрицательным давлением (котлы с естественной тягой), либо с положительным давлением (котлы с наддувом) в топочной камере согласно инструкции завода-изготовителя. Данный стандарт устанавливает необходимую терминологию, требования к материалам и их испытаниям, а также требования к маркировке отопительных котлов. Требования настоящего стандарта применяются к отопительным котлам, прошедшим испытания на утвержденной испытательной установке. Настоящий стандарт не распространяется на газовые котлы с атмосферными горелками; котлы, работающие на твердом топливе; конденсационные котлы, работающие на газе и мазуте, а также котлы с горелками испарительного типа. Технические условия на такие котлы рассматриваются отдельно

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 28

Approved: Federal Agency for Technical Regulation and Metrology, 9/28/2011

SKU: RUSS69709

Price: $359.87




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 01 General. Terminology. Standardization. Documentation »

Construction (Max) » Standards » Other state standards used in construction » 27 Power and heat engineering »

Welding regulations » Welding work »

Welding regulations » Main materials »

Welding regulations » Pipelines »

Welding regulations » Metal structures »

Welding regulations » Welding materials »

Welding regulations » Welding staff »

Welding regulations » Admission Testing »

Welding regulations » Documentation »

Welding regulations » Mechanical Testing »

Welding regulations » Heat treatment »

Welding regulations » Defects »

Welding regulations » Welding work » Manual welding »

Welding regulations » Welding work » Soldering »

Welding regulations » Main materials » Steel, cast iron »

Welding regulations » Main materials » Non-ferrous metals »

Welding regulations » Welding materials » Wire »

Welding regulations » Welding materials » Fluxes »

Welding regulations » Welding materials » Gases »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 010/2011 TR CU. On safety of machinery and equipment » Regulations and standards (to ТР ТС ТС 010/2011) »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 016/2011 TR CU. On safety of gaseous fuel machines » Regulations and standards (to ТР ТС ТС 016/2011) »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.13 Testing and control of products of engineering industry » 4.13.1 Machinery, equipment and components for general engineering applications » 4.13.1.4 Thermal and electrothermal equipment »

ISO classifier » 01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION » 01.040 Dictionaries » 01.040.91 Building materials and construction (Dictionaries) »

National standards » 01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION » 01.040 Dictionaries » 01.040.91 Building materials and construction (Dictionaries) »

ISO classifier » 27 ENERGY AND HEATING TECHNOLOGY » 27.060 Burners. Boilers » 27.060.20 Gas burners »

National standards » 27 ENERGY AND HEATING TECHNOLOGY » 27.060 Burners. Boilers » 27.060.20 Gas burners »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.140 Installations in buildings » 91.140.10 Central heating systems »

National standards » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.140 Installations in buildings » 91.140.10 Central heating systems »

National Standards for KGS (State Standards Classification) » Latest edition » E Power and electrical equipment » E2 Steam-powered equipment » E21 Steam Boilers »


The Document References:

GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications

GOST 12815-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). Types. Connecting dimensions and dimensions of sealing surfaces

GOST 12816-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). General technical requirements

GOST 12817-80: Cast grey iron flanges for Pnom from 0,1 to 1,6 MPa (from 1 to 16 kgf/sq sm). Design and dimensions

GOST 12818-80: Cast malleable iron flanges for Pnom from 1,6 to 4,0 MPa (from 16 to 40 kgf/cm2). Design and dimensions

GOST 12819-80: Cast steel flanges for Pnom from 1,6 to 20,0 MPa (from 16 to 200 kgf/sq sm). Design and dimensions

GOST 12820-80: Steel plane welded flanges for Pnom from 0,1 to 2,5 MPa (from 1 to 25 kgf/cm2). Design and dimensions

GOST 12821-80: Steel butt-welded flanges for Pnom from 0,1 to 20,0 MPa (from 1 to 200 kgf/cm2). Design and dimensions

GOST 12969-67: Plates for machines and devices. Technical requirements

GOST 1412-85: Flakish graphite cast iron

GOST 14254-96: Degrees of protection provided by enclosures (IP Code)

GOST 14771-76: Gas-shielded arc welding. Welded joints. Main types, design elements and dimensions

GOST 15164-78: Electroslag welding. Welded joints. Main types, design elements and dimensions

GOST 15763-2005: Threaded and flange pipe connections for PN to 63 MPa (to 630 kgf/sq sm). General specifications

GOST 1577-93: Plate and broadband roll stock of construction fine steel.

GOST 16037-80: Welded joints in steel pipelines. Main types, design elements and dimensions

GOST 16093-2004: Basic norms of interchangeability. Metric screw thread. Tolerances. Clearance fits

GOST 19281-89: Rolled steel with increased strength. General specifications

GOST 2.312-72: Symbolic designations and representations of welds and welded joints

GOST 20072-74: Heat-resistant steel

GOST 22761-77: Metals and alloys. Brinell hardness test by static action portable hardness meters

GOST 23358-87: Threaded pipe-line connections. Joint washers. Design

GOST 24705-2004: Вasic norms of interchangeability. Metric screw thread. Basic dimensions

GOST 27208-87: Cast iron casting. Methods of mechanical testing

GOST 27570.0-87: Safety of household appliances and similar devices

GOST 27824-2000: Industrial burners for liquid fuel. General technical requirements

GOST 29297-92: Welding, brazing, soldering and braze welding of metals

GOST 380-2005: Common quality carbon steel. Grades

GOST 380-50: Carbon steel, hot-rolled, of ordinary quality. Classification and general specifications

GOST 5264-80: Manual are welding. Welding joints. Main types, design elements and dimensions

GOST 5520-79: Carbon, low-alloy and alloy sheet steel for boilers and pressure vessels. Specifications

GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades

GOST 6211-81: Conical pipe thread. Profile, basic dimensions and tolerances

GOST 6357-81: Basic norms of interchangeability pipe cylindrical thread

GOST 7293-85: Cast iron with globular graphite for foundry

GOST 7350-77: Plate, corrosion-resistant, heat-resistant, and high-temperature steel

GOST 7769-82: Alloyed cast iron for castings with special properties

GOST 8713-79: Flux welding. Welded joints. Maih types design elements and dimensions

GOST 9012-59: Metals. Method of Brinell hardness measurement

GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions

GOST R 1.5-2004: Standardization in the Russian Federation. National standards of the Russian Federation. Rules of structure, drafting, presentation and indication

GOST R 51383-99: Automatic forced draught burners for gaseous fuels. Technical requirements, safety requirements and test methods

GOST R 53526-2009: Welding personnel. Approval testing of welding operators for fusion welding and of resistance weld setters for fully mechanized and automatic welding of metallic materials

GOST R 53690-2009: Qualification test of welders. Fusion welding. Part 1. Steels

GOST R 53994.2.9-2010: Automatic electrical controls for household and similar use. Part 2.9. Particular requirements for temperature sensing controls

GOST R 54820-2011: Heating boilers. Test code for heating boilers for atomizing oil burners

GOST R ISO 4063-2010: Welding and allied processes. Nomenclature of processes and reference numbers

GOST R ISO 857-1-2009: Welding and allied processes. Vocabulary. Part 1. Metal welding processes. Terms and definitions

ST SEV 1372-78: Safety. Steam and hot water boilers. Requirements for sheets of alloyed and unalloyed steel

Federal Law 184-FZ: About technical regulation

The Document is Referenced By:

GOST R 54441-2011: Heating boilers. Part 2. Heating boilers with forced draught burner. Special requirements for boilers with atomizing oil burners

GOST R 54442-2011: Heating boilers. Part 3. Gas-fired central heating boilers. Assembly comprising boiler body and a forced draught burner. Testing of heat engineering

GOST R 54444-2011: Heating boilers. Part 7. Boilers with gas burners with forced air central heating supply with a thermal input not exceeding 1000 kW

GOST R 54820-2011: Heating boilers. Test code for heating boilers for atomizing oil burners

Decision 86: On the list of international and regional (interstate) standards, and in their absence - national (state) standards, as a result of which, on a voluntary basis, compliance with the requirements of the technical regulations of the Customs Union "On the safety of devices operating on gaseous fuel" (TR CU 016 / 2011), and the list of international and regional (interstate) standards, and in their absence - national (state) standards containing rules and methods of research (testing) and measurements, including sampling rules necessary for the application and fulfillment of requirements technical regulations of the Customs Union "On the safety of devices operating on gaseous fuel" (TR CU 016/2011) and the implementation of conformity assessment of objects of technical regulation

Customers Who Viewed This Item Also Viewed:

Electromagnetic compatibility of technical equipment. Immunity of equipment for general lighting purposes to electromagnetic disturbance. Requirements and test methods
Language: English
Price: $218.25
Еlectromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <= 16 A per phase). Limits and test methods
Language: English
Price: $410.31
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
Language: English
Price: $714.89
Pipeline valves. General safety requirements
Language: English
Price: $213.84
Еlectromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A and not subject to conditional connection. Limits and test methods
Language: English
Price: $359.87
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Conformity assessment system for the use of nuclear energy. Personnel in the non-destructive and destructive testing of metal. Requirements and qualification procedure Дата введения в действие 15.03.2018
Language: English
Price: $207.90
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Language: English
Price: $121.77
Unified system of corrosion and ageing protection. Paint coatings. Groups of operation conditions
Language: English
Price: $158.40
Atom stations. Equipment, instruments, means of monitoring and control systems. General technical requirements
Language: English
Price: $1,146.54
System of design documents for construction. Basic requirements for design and working documentation
Language: English
Price: $867.18
Reinforcing rolled products for reinforced concrete constructions. Specifications
Language: English
Price: $298.98
Passenger cars on locomotive traction. Requirements for structural strength and dynamic qualities
Language: English
Price: $595.58
Non-destructive Testing. Welded Joints. Ultrasonic Methods
Language: English
Price: $140.58
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $293.04
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $212.85
Pipeline valves. Leakage rates of valves
Language: English
Price: $173.25
Compilation and execution of safety data sheet of chemical products
Language: English
Price: $175.23
Supports for Cylindrical and Conical Upright Apparatus. Types and Basic Parameters
Language: English
Price: $573.20

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!