GOST R 55075-2012
ГОСТ Р 55075-2012
|
|
Sections of pipelines derived from composite materials intended for installation and rehabilitation of public water and wastewater systems. Specifications
Сегменты трубопроводов, изготовленные из композиционных материалов, предназначенные для открытой прокладки и ремонта систем водоснабжения и водоотведения. Технические условия
Status: Effective. IUS 11-2014
This standard establishes requirements for segments of pipelines made of composite materials, made by winding onto the form of oriented fiberglass impregnated with binder in combination with the application of chopped glass fiber and inert filler (hereinafter referred to as pipeline segments) intended for open and closed gaskets, new construction and rehabilitation of water supply and wastewater systems , transportation of drinking and waste waters, as well as other substances that do not have a damaging effect on the material oprovoda. This standard applies to pipeline segments with a nominal diameter of DN of no more than 4000, a nominal pressure of PN of no more than 2.0 and a temperature of the transported medium from 0 ° C to 60 ° C. This standard does not apply to pipeline segments intended for electrical work and transportation of flammable liquids and gases used as raw materials and fuels for industrial and municipal use.
Настоящий стандарт устанавливает требования с сегментам трубопроводов из композиционных материалов, изготовленным намоткой на форму пропитанного связующим ориентированного стекловолокна в сочетании с нанесением рубленого стекловолокна и инертного наполнителя, (далее - сегменты трубопроводов) предназначенным для открытой и закрытой прокладок, нового строительства и санации систем водоснабжения и водоотведения, транспортирования питьевой и сточных вод, а также других веществ, не оказывающих разрушающего воздействия на материал трубопровода. Настоящий стандарт распространяется на сегменты трубопроводов номинальным диаметром DN не более 4000, номинальным давлением PN не более 2,0 и температурой транспортируемой среды от 0 °С до 60 °С. Настоящий стандарт не распространяется на сегменты трубопроводов, предназначенные для проведения электромонтажных работ и транспортирования горючих жидкостей и газов, применяемых в качестве сырья и топлива для промышленного и коммунально-бытового использования
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
11/14/2012
SKU: RUSS69722
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
23 Hydraulic and pneumatic systems and components for general use. »
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
II Ensuring environmental safety »
2 Protection and protection of surface water bodies »
2.3 Water use »
2.3.1 Basic requirements for use of water bodies »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.10 Testing and monitoring products of rubber and plastics industry »
4.10.2 Plastic Products »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.20 Plastic pipes »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.20 Plastic pipes »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.45 Plastic fittings »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.45 Plastic fittings »
The Document References:
GN 2.1.6.1338-03: Maximum allowable concentrations (MACs) of pollutants in the air of residential areas
GN 2.2.5.1313-03: Maximum allowable concentrations (MACs) of harmful substances in occupational air
GOST 11358-89: Dial-type thickness gauges and dial-type wall thickness gauges graduated in 0,01 and 0,1 mm. Specifications
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.018-93: Fire and explosion safety of static electricity. General requirements.
GOST 12.1.044-89: Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination
GOST 12.2.003-91: Industrial equipment. General safety requirements
GOST 12.3.030-83: Occupation safety standards system. Safety requirements. Plastics processing
GOST 12.4.004-74: Filtering protective mask RPG-67
GOST 12.4.011-89: Occupational safety standards system. Means of protection. General requirements and classification
GOST 12.4.021-75: Ventilation systems. General requirements
GOST 12.4.028-76: Respirators шб-1 "lepestok"
GOST 12.4.068-79: Occupational safety standards system. Dermatologic personal safety means. Classification and general requirements
GOST 12.4.121-83: Industrial filtering gas-masks
GOST 14192-96: Cargo marking
GOST 15139-69: Plastics. Methods for the determination of density (mass density)
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 17.1.3.13-86: Hydrosphere. General requirements for surface water protection against pollution
GOST 17.2.3.01-86: Nature protection. Atmosphere. Air quality control regulations for populated areas
GOST 17.2.3.02-78: Regulations for establishing permissible emissions of noxious pollutants from industrial enterprises
GOST 17.4.3.04-85: Nature protection. Soils. General requirements for contamination control and protection
GOST 19300-86: Instruments for measurement of surface roughness by the profile method. Contact profilographs and profilometers. Types and main parameters
GOST 2.601-2006: Unified system for design documentation. Exploitative documents
GOST 20010-93: Industrial rubber gloves
GOST 21650-76: Means of fastening tared and break bulk cargoes in the loads units. General requirements
GOST 22235-2010: Freight cars for 1520 mm gauge main line railways. General requirements for safety in loading-unloading and shunting operations
GOST 25.604-82: Design calculation and strength testing. Methods of mechanical testing of polymeric composite materials. Test for bending properties at normal, elevated and low temperatures
GOST 27078-86: Thermoplastic pipes. Methods of determination of the tubes length after heating
GOST 3749-77: Checking 90° squares. Specifications
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 4650-80: Plastics. Methods for the determination of water absorption
GOST 5378-88: Vernier protractors. Specifications
GOST 7470-92: Micrometric depth meters. Specifications
GOST 7502-98: Measuring metal tapes. Specifications
GOST 9078-84: Flat pallets
GOST 9378-93: Roughness comparison specimens
GOST R 12.1.019-2009: Occupational safety standards system. Electrical safety. General requirements and nomenclature of kinds of protection
GOST R 52108-2003: Resources saving. Waste treatment. Basic principles
GOST R 54559-2011: Fibre reinforced thermosetting plastic pipes and parts of pipelines. Terms and definitions
GOST R ISO 3126-2007: Plastics piping systems. Plastics components of piping systems. Determination of dimensions
SanPiN 2.1.7.1322-03: Hygienic requirements regarding dumping and decontamination of industrial and consumable waste
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.