GOST R 55153-2012
ГОСТ Р 55153-2012
|
|
The mountain-mine equipment. Underground loading-transport machines. The safety requisitions and test methods
Оборудование горно-шахтное. Машины погрузочно-доставочные шахтные. Требования безопасности и методы испытаний
Status: Effective - Introduced for the first time. IUS 10-2014
This standard applies to loading and hauling shaft machines (hereinafter referred to as machines) with front-mounted loading equipment and a load carrying bucket, pneumatic chassis and articulated frame, electric or diesel drive, designed for use outside the public roads for loading loosened rock mass from the stack , the subsequent delivery and unloading of it into vehicles, including the body of dump trucks, receiving bunkers, ore passes, conveyors in mine workings underground mining and construction of underground structures at an inclination of soil excavation or longitudinal profile of the road - up to 15 degrees. Machines can also be used in open pit mining. This standard does not apply to vehicles with a load-carrying transport body, with reloading equipment, with power supply from batteries, loading mine machines in accordance with GOST 26917, other types of transport machines, and also machines designed before the introduction this standard
Настоящий стандарт распространяется на погрузочно-доставочные шахтные машины (далее - машины) с фронтально расположенным погрузочным оборудованием и грузонесущим ковшом, пневмоколесной ходовой частью и шарнирно сочлененной рамой, электрическим или дизельным приводом, предназначенные для применения вне дорог общего пользования для погрузки разрыхленной горной массы из штабеля, последующей доставки и разгрузки ее в транспортные средства, в том числе кузова автосамосвалов, приемные бункеры, рудоспуски, конвейеры в горных выработках при подземной разработке полезных ископаемых и строительстве подземных сооружений при угле наклона почвы выработок или продольного профиля дороги - до 15 градусов. Машины могут применяться также при разработке месторождений открытым способом Настоящий стандарт не распространяется на машины с грузонесущим транспортным кузовом, с перегрузочным оборудованием, с энергоснабжением от аккумуляторных батарей, погрузочные шахтные машины по ГОСТ 26917, транспортные машины других типов, а также на машины, спроектированные до введения настоящего стандарта
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
11/22/2012
SKU: RUSS69724
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.2 Operation of production machines and equipment »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.13 Testing and control of products of engineering industry »
4.13.2 Machines and equipment for special purposes »
4.13.2.4 Machines and equipment for mining, oil industry and quarrying »
ISO classifier »
73 MINING AND MINERAL PRODUCTS »
73.100 Mining equipment »
73.100.40 Equipment for haulage and lifting »
National standards »
73 MINING AND MINERAL PRODUCTS »
73.100 Mining equipment »
73.100.40 Equipment for haulage and lifting »
The Document References:
GN 2.2.5.1313-03: Maximum allowable concentrations (MACs) of harmful substances in occupational air
GOST 12.0.003-74: Dangerous and harmful production effects. Classification
GOST 12.1.003-83: Noise. General safety requirements
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.010-76: Explosion safety. General requirements
GOST 12.1.012-2004: Occupational safety stаndards system. Vibration safety. General requirements
GOST 12.1.016-79: Work area air
GOST 12.1.044-89: Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination
GOST 12.2.003-91: Industrial equipment. General safety requirements
GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements
GOST 12.2.049-80: Occupational safety standards system. Industrial equipment. General ergonomic requirements
GOST 12.2.064-81: Occupational safety standards system. Controls of industrial equipment. General safety requirements
GOST 12.2.106-85: Occupational safety standards system. Machines and mechanisms for mining of ore, non-ore and placer deposits. General hygienic requirements and methods of testing
GOST 12.2.130-91: Occupational safety standard system. Single-bucket excavators. General safety and ergonomical requirements for the operator's position and methods of their control
GOST 12.3.002-75: Occupational safety standards system. Manufacturing processes. General safety requirements
GOST 13837-79: General purpose dynamometers
GOST 15.309-98: System of product development and launching into manufacture. Test and acceptance of produced goods. Principal positions
GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions
GOST 17.2.2.02-98: Nature protection. Atmosphere. Rates and testing methods of exhaust smoke from diesel engines, tractors and agricultural machines
GOST 17168-82: Octave and one-third-of-octave electronic filters
GOST 17187-2010: Noise meters Part 1 Technical requirements
GOST 17216-2001: Industrial cleanliness. Grades of liquids purity
GOST 2.106-96: Unified system for design documentation. Text documents
GOST 2.601-2006: Unified system for design documentation. Exploitative documents
GOST 21153.0-75: Rocks. Sampling and general requirements for the methods of physical testing
GOST 21153.1-75: Rocks. Method for the determination of strength factor according to Protodyakonov
GOST 21753-76: Man -machine system control levers
GOST 21786-76: Man-machine system. Sound signalling devices for non-voice communication. General ergonomic requirements
GOST 21889-76: Man-machine system. Operator's arm-chair. General ergonomic requirements
GOST 22613-77: Man-machine system. Rotary switches and commutators. General ergonomic requirements
GOST 22614-77: «Man-machine» system. Key-actuated and push-button switches and commutators. General ergonomic requirements
GOST 23000-78: Man-machine system. Control consoles. General ergonomic requirements
GOST 23941-2002: Noise of machines. Methods for determination of noise characteristics. General requirements
GOST 2405-88: Pressure gauges, vacuum gauges, pressure-vacuum gauges, pressure meters, draft gauges and draft-pressure gauges
GOST 24754-81: General purpose mining electric equipment
GOST 26917-2000: Underground loading machines. General technical requirements and test methods
GOST 27258-87: Earth-moving machinery
GOST 27721-88: Earth-moving machinery. Loaders. Terminology and commercial. Specifications
GOST 28635-90: Earth-moving machinery. Rated operating load for crawter and wheel loaders
GOST 28770-90: Earth moving machinery. Loaders. Methods of measuring tool forces and tipping loads
GOST 29.05.002-82: Standards system of ergonomic requirements and ergonomic means. Digital and sign-synthesizing indicators. General ergonomic requirements
GOST 29076-91: Marine, locomotive and industrial diesel engines. Requirement to fire protection
GOST 29292-92: Earth-moving machinery. Machine mounted forward and reverse audible warning alarm. Sound test method
GOST 31438.2-2011: Explosive atmospheres. Explosion protection and prevention. Part 2. Basic concepts and methodology (for mining)
GOST 31439-2011: Equipment and components intended for use in potentially explosive atmospheres in underground mines
GOST 31440.2-2011: Reciprocating internal combustion engines. Safety requirements for design and construction of engines for use in potentially explosive atmospheres. Part 2. Group I engines for use in underground workings susceptible to fired amp and/or combustible dust
GOST 31441.1-2011: Non-electrical equipment for potentially explosive atmospheres. Part 1. General requirements
GOST 31441.5-2011: Non-electrical equipment for potentially explosive atmospheres. Part 5. Protection by constructional safety «c»
GOST 31613-2012: Static electricity spark safety. General technical requirements and test methods
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 5378-88: Vernier protractors. Specifications
GOST 7502-98: Measuring metal tapes. Specifications
GOST 9871-75: Mercury-in-glass electric-contact thermometers
GOST ISO 5010-2011: Earth-moving machinery. Steering requirements for rubber-tyred machines
GOST ISO 8041-2006: Vibration. Human response to vibration. Measuring instrumentation
GOST R 12.4.026-2001: Occupational safety standards system. Safety colors, safety signs and signal marking. Purpose and rules of application. General technical requirements and characteristics. Test methods
GOST R 15.201-2000: System of product development and launching into manufacture. Products of industrial and technical designation. Procedure of product development and launching into manufacture
GOST R 50559-93: Industrial purity. General requirements for supplying, transporting, storage and feeding of working liquids
GOST R 51601-2000: Building single-bucket loaders. Specifications
GOST R 52350.1-2005: Electrical apparatus for explosive gas atmospheres. Part 1. Flameproof enclosures 'd'
GOST R 52543-2006: Hydraulic drives. Safety requirements
GOST R 53648-2009: Underground diesel locomotives. General technical requirements and test methods
GOST R IEC 60079-0-2011: Explosive atmospheres. Part 0. Equipment. General requirements
GOST R ISO 12100-1-2007: Safety of machinery. Basic concepts, general principles for design. Part 1. Basic terminology, methodology
GOST R ISO 12100-2-2007: Safety of machinery. Basic concepts, general principles for design. Part 2. Technical principles
GOST R ISO 3449-2009: Earth-moving machinery. Falling-object protective structures. Laboratory tests and performance requirements
GOST R ISO 3471-2009: Earth-moving machinery. Roll-over protective structures. Technical requirements and laboratory tests
GOST R ISO 6683-2010: Earth-moving machinery. Seat belts and seat belt anchorages. Performance requirements and tests
PB 03-428-02: Safety Requirements for Construction of Underground Structures
PB 03-553-03: Uniform Safety Requirements for Underground Development of Ore, Non-Ore, and Placer Mineral Deposits
PB 05-618-03: Coal Mine Safety Regulations
RD 05-311-99: Safety norms for diesel-driven transport machines for coal mines
RD 05-312-99: Technical Requirements for the Safe Operation of Diesel Drive Transport Vehicles in Coal Mines
RD 06-572-03: Instructions for the safe operation of electrical installations in the mining industry
SN 2.2.4/2.1.8.562-96: Noise exposure in work environment, residential premises, premises of public buildings and in dwellings zones
The Document is Referenced By:
GOST R 55730-2013: Mining equipment. Loading-transport machines. General technical requirements
Customers Who Viewed This Item Also Viewed:
|
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English |
Armour clothes. Classification and general technical requirements
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Food products. Methods for detection and quantity determination of coliformes
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Hotels design
Language: English |
Railroad rails. General specifications
Language: English |
Potassium chloride
Language: English |
Controllers acting without
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.