GOST R 55154-2012
ГОСТ Р 55154-2012
|
|
Equipment mountain-mine. Systems of safety of the coal mines multifunctional. General technical requirements
Оборудование горно-шахтное. Системы безопасности угольных шахт многофункциональные. Общие технические требования
Status: Effective. IUS 1-2014
This standard applies to multifunctional coal mine safety systems. This standard establishes the purpose, general principles and technical requirements for the construction, use and operation of the IFSB.
Настоящий стандарт распространяется на многофункциональные системы безопасности угольных шахт. Настоящий стандарт устанавливает назначение, общие принципы и технические требования к построению, применению и эксплуатации МФСБ
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
11/22/2012
SKU: RUSS69725
The Product is Contained in the Following Classifiers:
Technical Supervision »
Section I. Technological, construction, energy supervision and environmental protection regarding limitation of negative anthropogenic impact »
IV. Regulatory legal acts and regulations »
2. Industrial safety »
2.3. Objects of coal industry »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.2 Operation of production machines and equipment »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.13 Testing and control of products of engineering industry »
4.13.2 Machines and equipment for special purposes »
4.13.2.4 Machines and equipment for mining, oil industry and quarrying »
ISO classifier »
73 MINING AND MINERAL PRODUCTS »
73.100 Mining equipment »
73.100.99 Other mining equipment »
National standards »
73 MINING AND MINERAL PRODUCTS »
73.100 Mining equipment »
73.100.99 Other mining equipment »
The Document is Replaced With:
GOST R 55154-2019: Mining equipment. Multifunctional coal mine safety systems. General technical requirements
The Document References:
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.010-76: Explosion safety. General requirements
GOST 12.2.003-91: Industrial equipment. General safety requirements
GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements
GOST 12.3.032-84: Occupational safety standards system. Electric installation works. General safety requirements
GOST 14254-96: Degrees of protection provided by enclosures (IP Code)
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15543.1-89: Electrical articles. General requirements for environmental climatic aspects stability
GOST 17516-72: Electrical articles. Operating conditions as to environment mechanical aspects influence
GOST 18311-80: Electrical products. Terms and definitions of basic concepts
GOST 2.601-2006: Unified system for design documentation. Exploitative documents
GOST 2.602-95: Unified system for design documentation. Repair documents
GOST 2.610-2006: Unified system for design documentation. Rules for making exploitative documents
GOST 22315-77: Aggregate means of information-measuring systems. General principles
GOST 22316-77: Aggregate means of information-measuring systems. Complex of normalized characteristics general requirements
GOST 23611-79: Electromagnetic compatibility of radio-electronic equipment. Terms and definitions
GOST 24.104-85: Unified system of standards of computer control systems. Computer control systems. General requirements
GOST 24754-81: General purpose mining electric equipment
GOST 27.003-90: Reliability in engineering. Make-up and general rules for assigning reliability requirements
GOST 27.301-95: Dependability in techniques. Dependability prediction. Basic principles
GOST 34.003-90: Information technology. Set of standards for automated systems. Automated systems. Terms and definitions
GOST 8.563.1-97: Measurement of liquids and gases flow rate and quantity by differential pressure method orifice plates, nozzles isa 1932 and ventury tubes inserted in circular cross-section filled conduits.
GOST 8.586.1-2005: State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 1. Principle of the method of measurements and general requirements
GOST ISO 9001-2011: Quality management systems. Requirements
GOST R 12.1.019-2009: Occupational safety standards system. Electrical safety. General requirements and nomenclature of kinds of protection
GOST R 27.403-2009: Dependability in technics. Compliance tests plans for reliability
GOST R 50397-2011: Electromagnetic compatibility of technical equipment. Тerms and definitions
GOST R 50922-2006: Protection of information. Basic terms and definitions
GOST R 51275-2006: Protection of information. Object of informatization. Factors influencing the information. General
GOST R 51317.6.2-2007: Electromagnetic compatibility of technical equipment. Immunity of technical equipment intended for use in industrial environments. Requirements and test methods
GOST R 51330.20-99: Mining electrical equipment. Insulation, leakage paths and electrical gaps. Technical requirements and testing methods
GOST R 51897-2011: Risk management. Terms and definition
GOST R 51901.1-2002: Risk management. Risk analysis of technological systems
GOST R 52319-2005: Safety requirements for electrical equipment for measurement, control and laboratory use. Part 1. General requirements
GOST R 53704-2009: Complex and integrated security systems. General technical requirements
GOST R 6.30-2003: Unified systems of documentation. Unified system of managerial documentation. Requirements for presentation of documents
GOST R IEC 60079-0-2011: Explosive atmospheres. Part 0. Equipment. General requirements
GOST R IEC 60079-11-2010: Explosive atmospheres. Part 11. Intrinsic safety circuit «i»
GOST R IEC 60079-1-2008: Explosive atmospheres. Part 1. Equipment protection by flameproof enclosures 'd'
GOST R IEC 61140-2000: Protection against electric shock. Common aspects for installation and equipment
GOST R IEC 61160-2006: Risk management. Formal design review
GOST R IEC 870-1-1-93: Telecontrol equipment and systems. Part 1. General considerations. Section One - General principles
GOST R ISO 10006-2005: Quality management systems. Guidelines for quality management in projects
GOST R ISO 9000-2008: Quality management systems. Fundamentals and vocabulary
GOST R ISO/IEC 15288-2005: Information technology. System engineering. System life cycle processes
GOST R ISO/IEC 17799-2005: Information technology. Code of practice for information security management
PB 05-618-03: Coal Mine Safety Regulations
POT R M-016-2001: Inter-Industry Occupational Safety and Health Regulations (Safety Regulations) for Operation of Electrical Installations
RD 03-14-2005: Procedure for completing a declaration of industrial safety for hazardous production facilities (dos) with a list of required information
RD 03-315-99: Regulations on a procedure for submitting the industrial safety declaration in proper form and on data contained in such submittal
RD 03-418-01: Methodical instruction for risk analysis of hazardous production plants
RD 04-355-00: The methodology recommendations on the organization of the operational control of the compliance with the industrial safety requirements at hazardous production facilities
RD 05-328-99: Instructions for the safe conduct of mining in mines, developing coal seams, prone to rock bursts
RD 05-350-00: Instructions for the safe conduct of mining operations in formations hazardous due to sudden emissions of coal (rock) and gas
RD 05-366-00: Instructions for the design of fire-irrigation water supply
RD 05-432-02: Regulation on the examination of industrial safety in the coal industry
RD 15-09-2006: Guidelines for the degassing of coal mines
RD 50-213-80: Rules of gas and liquid consumption measurement by standard coarct devices.
Rules 2001: Rules for operation of technical means of television and radio broadcasting. Part 1. Television
Rules 2001: Rules for operation of technical means of television and radio broadcasting. Part 2. Broadcasting
Rules 2001: Rules for operation of technical means of television and radio broadcasting. Part 3. General safety requirements
SanPiN 2.2.3.570-96: Hygienic Requirements for Coal Mining Industry and Organization of Work
Technical regulations of the Customs Union 012/2011: On the safety of equipment for work in explosive atmospheres
The Document is Referenced By:
GOST R 57717-2017: Safety in coal mines. Terms and definitions
GOST R 58494-2019: Mining equipment. Multifunctional coal mine safety systems. Remote control system for hazardous production facilities
PNST 161-2016: Mining equipment. Multipurpose safety systems and automated control systems for technological processes in the mine. Requirements for metrological providing and test methods
|
Customers Who Viewed This Item Also Viewed:
 |
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English |
Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
Language: English |
System for ensuring the reliability and safety of construction sites. Loads and impacts. design standards
Language: English |
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English |
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English |
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English |
Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
Language: English |
Dependability in technics. Terms and definitions
Language: English |
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English |
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English |
Rails of types P38 and P42. Technical conditions
Language: English |
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
