GOST R 55442-2013

ГОСТ Р 55442-2013

Tubes for boiler and heat exchanging equipment. Specifications. Part 1. Seamless steel pipes to work under pressure not more than 6,4 MPa and at temperatures not exceeding 400 °C

Трубы для котельного и теплообменного оборудования. Технические условия. Часть 1. Трубы стальные бесшовные для работы под давлением не более 6,4 МПа и при температуре не выше 400 °С

Status: Not effective - Canceled. Registration information 2204-st dated 12/25/2015 (the official website of Rosstandart); IUS 6-2016

This standard applies to cold-formed and hot-rolled seamless steel pipes made of carbon and low-alloy steels, designed for boiler, heat exchange equipment and pipelines operating under a pressure of not more than 6.4 MPa and at a temperature not exceeding 400 ° C

Настоящий стандарт распространяется на холоднодеформированные и горячедеформированны�� бесшовные стальные трубы из углеродистых и низколегированных сталей, предназначенные для котельного, теплообменного оборудования и трубопроводов, работающих под давлением не боле 6,4 МПа и при температуре не выше 400 °С

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 28

Approved: Federal Agency for Technical Regulation and Metrology, 6/19/2013

SKU: RUSS69726

Price: $371.00




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 77 Metallurgy »

ISO classifier » 77 METALLURGY » 77.140 Iron and steel products » 77.140.75 Steel pipes and tubes for special purposes »

National standards » 77 METALLURGY » 77.140 Iron and steel products » 77.140.75 Steel pipes and tubes for special purposes »


The Document References:

GOST 10006-80: Metal pipes

GOST 10243-75: Steel. Methods of test and estimation of macrostructure

GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications

GOST 10692-80: Steel and cast iron pipes and fittings. Rules for acceptance of marking, packing, transportation and storage

GOST 11358-89: Dial-type thickness gauges and dial-type wall thickness gauges graduated in 0,01 and 0,1 mm. Specifications

GOST 12359-99: Carbon, alloyed and high-alloyed steels. Methods for determination of nitrogen

GOST 14810-69: Plain double-end plug gauges with inserts of diameter over 3 to 50 mm. Design and dimensions

GOST 166-89: Vernier callipers. Specifications

GOST 17410-78: Non-destructive testing of seamless cylindrical metal pipes and tubes. Methods of ultrasonic imperfection detection.

GOST 18360-93: Plate snap-gauges for diameters from 3 to 260 mm. Dimensions

GOST 18365-93: Plate snap-gauges with changeable lips for diameters over 100 to 360 mm. Dimensions

GOST 19040-81: Metal tubes. Method of tension test at high temperatures

GOST 19281-89: Rolled steel with increased strength. General specifications

GOST 2015-84: Fixed plain gauges. Technical requirements

GOST 2216-84: Adjustable smooth snap gauges

GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis

GOST 22536.10-88: Carbon steel and unalloyed cast iron. Methods for determination of alluminium

GOST 22536.11-87: Carbon steel and unalloyed cast iron. Methods for determination of titanium

GOST 22536.1-88: Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite

GOST 22536.2-87: Carbon steel and unalloyed cast iron. Methods for the determination of sulfur

GOST 22536.3-88: Carbon steel and unalloyed cast iron. Methods for determination of phosphorus

GOST 22536.4-88: Carbon steel and unalloyed cast iron. Methods for determination of silicon

GOST 22536.5-87: Carbon steel and unalloyed cast iron. Methods for determination of manganese

GOST 22536.6-88: Carbon steel and unalloyed cast iron. Methods for determination of arsenic

GOST 22536.7-88: Carbon steel and unalloyed cast iron. Methods for determination of chromium

GOST 22536.8-87: Carbon steel and unalloyed cast iron. Methods for determination of copper

GOST 22536.9-88: Carbon steel and unalloyed cast iron. Methods for determination of nickel

GOST 26877-91: Metal products

GOST 27809-95: Cast iron and steel. Methods of spectrographic analysis

GOST 28548-90: Steel tubes. Terms and definitions

GOST 31458-2012: Steel pipes, tubes and pipe products. Inspection documents

GOST 3728-78: Tubes. Method of bend-over test

GOST 3845-75: Metallic tubes. Hydraulic pressure testing method

GOST 4543-71: Structural alloyed steel

GOST 6507-90: Micrometers. Specifications

GOST 7502-98: Measuring metal tapes. Specifications

GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition

GOST 8026-92: Levelling rules. Specifications

GOST 8694-75: Tubing (pipes). Expansion testing method

GOST 8695-75: Tubing (pipes). Flattening testing method

GOST 9012-59: Metals. Method of Brinell hardness measurement

GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature

GOST R 53364-2009: Steel pipes, tubes and pipe products. Inspection documents

GOST R 53383-2009: Hot-deformed seamless steel pipes. Specifications

Customers Who Viewed This Item Also Viewed:

Occupation safety standards system. Semiconductor converters of electric energy. Safety requirements
Language: English
Price: $13.00
Nature protection. Hydrosphere. General requirements to surface and underground water control against pollution by oil and oil products
Language: English
Price: $8.00
Man-machine system Semigraphics General ergonomic requirements
Language: English
Price: $90.00
Occupational safety standards system. Power frequency electric fields. Permissible levels of field strength and requirements for control at work-places
Language: English
Price: $49.00
Occupational safety standards system. Means of protection. General requirements and classification
Language: English
Price: $38.00
Occupational safety standard system. Electrotechnical devices for voltage more than 1 000 v
Language: English
Price: $38.00
Occupation safety standards system. Safety requirements. Switching devices for voltages below 1000 v
Language: English
Price: $13.00
Safety valves, control valves and pressure regulators. Face-to-face lengths
Language: English
Price: $41.00
Cables and cable fittings. Safety requirements
Language: English
Price: $18.00
Occupational safety standards system. Loading and unloading works General safety requirements
Language: English
Price: $43.00
Ventilation systems. General requirements
Language: English
Price: $28.00
Occupational safety standards system. Controls of industrial equipment. General safety requirements
Language: English
Price: $23.00
Occupational safety standards system. Transporting process of loads in all fields of national economy. General requirements safety
Language: English
Price: $76.00
Cargo marking
Language: English
Price: $216.00
Work area air
Language: English
Price: $58.00
General sanitary requirements for working zone air
Language: English
Price: $385.00
Fire safety. General requirements
Language: English
Price: $350.00
Electrical articles. Grounding terminals and grounding signs
Language: English
Price: $172.00
Man-machine system. Operator's arm-chair. General ergonomic requirements
Language: English
Price: $73.00
Occupational safety standards system. Electrical safety. General requirements and nomenclature of kinds of protection
Language: English
Price: $135.03

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!