GOST R ISO 16000-3-2007
ГОСТ Р ИСО 16000-3-2007
|
|
Indoor air. Part 3. Determination of formaldehyde and other carbonyl compounds. Active sampling method
Воздух замкнутых помещений. Часть 3. Определение содержания формальдегида и других карбонильных соединений. Метод активного отбора проб
Status: Not effective - Canceled. Registration information 37-st dated 02/09/2017 (official website of Rosstandart); IUS 7-2017
This standard establishes a method for the determination of formaldehyde (HNCO) and other carbonyl compounds (aldehydes and ketones) in the air. The method used to determine formaldehyde, after appropriate modification, is used to detect and quantify other carbonyl compounds (at least 13 compounds). The method is used to determine formaldehyde and other carbonyl compounds in the range of mass concentration values from approximately 1 μg / m 3. up to 1 mg / m 3 Using the method given in the standard, a time-averaged sample is obtained. The method can be used both for long-term (from 1 to 24 hours) and short-term (from 5 to 60 minutes) air sampling to determine its formaldehyde content.
Настоящий стандарт устанавливает метод определения формальдегида (НСНО) и других карбонильных соединений (альдегидов и кетонов) в воздухе. Метод, применяемый для определения формальдегида, после соответствующей модификации используют для детектирования и количественного определения других карбонильных соединений (не менее 13 соединений). Метод применяют для определения формальдегида и других карбонильных соединений в диапазоне значений массовой концентрации приблизительно от 1 мкг/м куб. до 1 мг/м куб. С помощью метода, приведенного в стандарте, получают усредненную по времени пробу. Метод может быть использован как при долгосрочном (от 1 до 24 ч), так и при краткосрочном (от 5 до 60 мин) отборе проб воздуха для определения содержания в нем формальдегида
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/27/2007
SKU: RUSS69746
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
13 Environmental protection, protection of people from environmental exposure. Security »
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
II Ensuring environmental safety »
1 Air Protection »
1.2 Rationing infield of atmospheric air protection »
1.2.1 Rationing of air quality and harmful physical effects »
1.2.1.3 Requirements for quality of atmospheric air of industrial facilities and industries »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
II Industrial sanitation and occupational health »
3 Workspace air »
3.1 Hygienic regulation of microclimate parameters and content of harmful substances in air of working area »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.040 Air quality »
13.040.20 Ambient atmosphere »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.040 Air quality »
13.040.20 Ambient atmosphere »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T5 Documentation System »
T58 System of standards infield of nature conservation and improvement of use of natural resources, labor safety, scientific organization of labor »
The Document References:
Federal Law 184-FZ: About technical regulation
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R ISO 16000-1-2007: Indoor air. Part 1. Sampling. General
GOST R ISO 16000-2-2007: Indoor air. Part 2. Sampling for formaldehyde content. Main principles
GOST R ISO 16000-4-2007: Indoor air. Part 4. Determination of formaldehyde. Diffusive sampling method
GOST R ISO 9001-2001: Quality management systems. Requirements
GOST R ISO/IEC 17025-2006: General requirements for the competence of testing and calibration laboratories
The Document is Referenced By:
GOST R ISO 12219-1-2014: Interior air of road vehicles. Part 1. Whole vehicle test chamber. Specification and method for the determination of volatile organic compounds in cabin interiors
GOST R ISO 12219-2-2014: Interior air of road vehicles. Part 2. Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials. Bag method
GOST R ISO 16000-10-2009: Indoor air. Part 10. Determination of the emission of volatile organic compounds from building products and furnishing. Emission test cell method
GOST R ISO 16000-23-2012: Indoor air. Part 23. Performance test for evaluating the reduction of formaldehyde concentrations by sorptive building materials
GOST R ISO 16000-24-2012: Indoor air. Part 24. Performance test for evaluating the reduction of volatile organic compound (except formaldehyde) concentrations by sorptive building materials
GOST R ISO 16000-5-2009: Indoor air. Part 5. Sampling strategy for volatile organic compounds (VOCs)
GOST R ISO 16000-9-2009: Indoor air. Part 9. Determination of the emission of volatile organic compounds from building products and furnishing. Emission test chamber method
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.