GOST R ISO 4042-2009
ГОСТ Р ИСО 4042-2009
|
|
Fasteners. Electroplated coatings
Изделия крепежные. Электролитические покрытия
Status: Not effective - Canceled. Registration information 398-st dated 05.24.2016 (official website of Rosstandart); IUS 11-2016
This standard specifies size requirements for fasteners made of steel or a copper alloy with electrolytic coatings. The standard establishes the thickness of coatings and provides recommendations for the removal of hydrogen embrittlement for fasteners with high tensile strength or hardness and for surface hardened fasteners. This standard applies to electrolytic coatings for threaded fasteners, but can also be applied to other threaded parts. The technical conditions specified in this standard may also apply to non-threaded parts, such as washers and pins.
Настоящий стандарт устанавливает требования к размерам крепежных изделий из стали или медного сплава с электролитическими покрытиями. В стандарте установлены толщины покрытий и приведены рекомендации по снятию водородного охрупчивания для крепежных изделий с высоким пределом прочности на растяжение или твердостью и для поверхностно закаленных крепежных изделий. Настоящий стандарт распространяется на электролитические покрытия резьбовых крепежных изделий, но также может быть применен для других резьбовых деталей. Технические условия, установленные в настоящем стандарте, могут также распространяться на нерезьбовые детали, например шайбы и штифты
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/10/2009
SKU: RUSS69753
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
21 Mechanical systems and general purpose devices »
Standards for pipe fittings (TPA) »
13. Standards for basic components and parts of injection molding machines »
13.2 Fasteners »
ISO classifier »
21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES »
21.060 Fasteners »
21.060.10 Bolts, screws, studs »
National standards »
21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES »
21.060 Fasteners »
21.060.10 Bolts, screws, studs »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G3 Fasteners for general engineering applications »
G30 Classification, nomenclature and general rules »
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 16093-2004: Basic norms of interchangeability. Metric screw thread. Tolerances. Clearance fits
GOST 24997-2004: Gauges for metric thread. Tolerances
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R ISO 3269-2009: Fasteners. Acceptance inspection
The Document is Referenced By:
GOST ISO 15071-2014: Hexagonal bolts with reduced head with flange. Precision class A
GOST ISO 4032-2014: Hex Nuts, normal (type 1). Precision classes A and B
GOST ISO 4033-2014: Hex Nuts high (type 2). Precision classes A and B
GOST ISO 4034-2014: Hex Nuts, normal (type 1). Precision class C
GOST ISO 4035-2014: Nuts hexahedral, low, chamfered (type 0). Precision classes A and B
GOST ISO 4036-2014: Nuts, hexagonal, low without bevel (type 0). Accuracy class B
GOST ISO 4162-2014: Hexagonal bolts with reduced head with flange. Precision class A to class of precision B
GOST ISO 7040-2014: Nuts Hex normal self-stopped (with non-metallic insert), type 1. Strength class 5, 8 and 10
GOST ISO 7041-2014: Nuts Hex high self-stopped (with non-metallic insert), type 2. Strength class 9 and 12
GOST ISO 7043-2014: Nuts Hex high self-stopped with flange (with non-metallic insert), type 2. Precision classes A and B
GOST ISO 7380-1-2014: Round head screw. Part 1. Round head screw with hexagon socket
GOST ISO 7380-2-2014: Round head screw. Part 2. Round head screw with hexagon socket and rim
GOST ISO 7719-2014: Hex nuts, normal, self-stopping, all metal (Type 1). Strength class 5, 8 and 10
GOST ISO 7720-2014: Hex nuts, high, self-stopping, all metal (Type 2). Strength class 9
GOST ISO 8673-2014: Hexagon regular nuts (style 1) with fine pitch thread. Product grades A and B
GOST ISO 8674-2014: Nuts hexahedral high (type 2) with a fine-pitch thread. Precision classes A and B
GOST ISO 8675-2014: Nuts hexahedral low chamfered (type 0) with fine pitch thread. Precision classes A and B
GOST R 53819-2010: Vehicles. Fastenings wheels. Technical requirements and test methods
GOST R 55738-2013: Studs and ceramic ferrules for stud welding
GOST R 55739-2013: Hexagon bolts with flange
GOST R 55742-2013: Screws with cylindrical head and large star-type internal socket
GOST R 57351-2016: Building steel structures. General specifications
GOST R ISO 10509-2013: Hexagon flange head tapping screws
GOST R ISO 10642-2012: Hexagon socket countersunk head screws
GOST R ISO 10644-2017: Screws with washers assembly, manufactured of steel, with flat washers. Washers of hardness classes 200 HV and 300 HV
GOST R ISO 10669-2017: Plain washers for tapping screw and washer assemblies. Normal and large series. Product grade A
GOST R ISO 1207-2013: Slotted cheese head screws. Product grade A
GOST R ISO 12474-2012: Hexagon socket head cap screws with metric fine pitch thread
GOST R ISO 14580-2012: Hexalobular socket cheese head screws
GOST R ISO 14584-2012: Star type socket raised countersunk head screws
GOST R ISO 14585-2012: Hexalobular socket pan head tapping screws
GOST R ISO 14586-2012: Hexalobular socket countersunk head tapping screws
GOST R ISO 14587-2012: Hexalobular socket raised countersunk head tapping screws
GOST R ISO 1479-2013: Hexagon head tapping screws
GOST R ISO 1481-2013: Slotted pan head tapping screws
GOST R ISO 1482-2013: Slotted countersunk head tapping screws
GOST R ISO 1483-2013: Slotted raised countersunk head tapping screws
GOST R ISO 15072-2013: Hexagon flange reduced head bolts with fine pitch thread. Product grade A
GOST R ISO 1580-2013: Slotted pan head screws. Product grade A
GOST R ISO 2009-2013: Slotted raised countersunk head screws. Product grade A
GOST R ISO 2010-2013: Slotted raised countersunk head screws. Product grade A
GOST R ISO 2320-2009: Prevailing torque type steel nuts - Mechanical and performance properties
GOST R ISO 3269-2009: Fasteners. Acceptance inspection
GOST R ISO 4014-2013: Hexagon head bolts. Product grades A and B
GOST R ISO 4016-2013: Hexagon head bolts. Product grade C
GOST R ISO 4017-2013: Hexagon head screws. Product grades A and B
GOST R ISO 4018-2013: Hexagon head screws. Product grade C
GOST R ISO 4026-2013: Hexagon socket set screws with flat point
GOST R ISO 4027-2013: Hexagon socket set screws with cone point
GOST R ISO 4028-2013: Hexagon socket set screws with dog point
GOST R ISO 4029-2013: Hexagon socket set screws with cup point
GOST R ISO 4161-2013: Hexagon nuts with flange, style 2. Coarse thread
GOST R ISO 4759-1-2009: Tolerances for fasteners. Part 1: bolts, screws, studs and nuts. Product grades A, B and C
GOST R ISO 4759-3-2009: Tolerances for fasteners – Part 3: plain washers for bolts, screws and nuts – product grades A and C
GOST R ISO 4762-2012: Hexagon socket head screws
GOST R ISO 4766-2013: Slotted set screws with flat point
GOST R ISO 7042-2011: Prevailing torque type all-metal hexagon nuts, style 2. Property classes 5, 8, 10 and 12
GOST R ISO 7045-2013: Pan head screws with type H or type Z cross recess. Product grade A
GOST R ISO 7046-1-2013: Countersunk flat head screws (common head style) with type H or type Z cross recess. Product grade A. Part 1. Steel screws of property class 4.8
GOST R ISO 7046-2-2013: Countersunk flat head screws (common head style) with type H or type Z cross recess. Product grade A. Part 2. Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws
GOST R ISO 7047-2013: Raised countersunk head screws with type H or type Z cross recess. Product grade A
GOST R ISO 7048-2013: Cross-recessed cheese head screws
GOST R ISO 7049-2012: Cross-recessed pan head tapping screws
GOST R ISO 7050-2012: Cross-recessed countersunk (flat) head tapping screws
GOST R ISO 8676-2013: Hexagon head screws with metric fine pitch thread. Product grades A and B
GOST R ISO 8765-2013: Hexagon head bolts with metric fine pitch thread. Product grades A and B
GOST R ISO 898-1-2011: Mechanical properties of fasteners made of carbon steel and alloy steel. Part 1. Bolts, screws and studs of specified property classes with coarse thread and fine pitch thread
GOST R ISO 8992-2011: Fasteners. General requirements for bolts, screws, studs and nuts
|
Customers Who Viewed This Item Also Viewed:
 |
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English |
Armour clothes. Classification and general technical requirements
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Food products. Methods for detection and quantity determination of coliformes
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Hotels design
Language: English |
Railroad rails. General specifications
Language: English |
Potassium chloride
Language: English |
Controllers acting without
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
