GOST 22233-2001
ГОСТ 22233-2001
|
|
Aluminium alloy extruded sections for translucent envelopes. General specifications
Профили прессованные из алюминиевых сплавов для светопрозрачных ограждающих конструкций. Технические условия
Status: Valid - In exchange for 09/01/2019. IUS 10-2002
It extends to aluminum-magnesium-silicon system profiles made from aluminum alloys, made by hot pressing and intended for use in translucent walling structures of buildings and structures.
Распространяется на профили из алюминиевых сплавов системы алюминий-магний-кремний, изготовленные методом горячего прессования и предназначенные для применения в светопрозрачных ограждающих конструкциях зданий и сооружений.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstroy of Russia,
3/26/2002
SKU: RUSS69794
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
5. Regulatory documents for building structures and products »
K.53 Metal structures »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.12 Testing and control of products of metallurgical industry »
4.12.5 Non-ferrous metal products »
ISO classifier »
77 METALLURGY »
77.150 Non-ferrous metal products »
77.150.10 Aluminum products »
National standards »
77 METALLURGY »
77.150 Non-ferrous metal products »
77.150.10 Aluminum products »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh3 Building structures and parts »
Zh34 Metal structures and parts »
National Standards for OKSTU »
EQUIPMENT FOR TRAFFIC REGULATION, SERVICE OF AGRICULTURAL MACHINERY AND AUXILIARY MEANS OF COMMUNICATION. CONSTRUCTIONS CONSTRUCTION METAL »
Decorative and cladding structures, molded products and equipment of buildings »
The Document is Replaced With:
GOST 22233-2018: Aluminium alloy extruded sections for translucent envelopes. Specifications
As a Replacement Of:
GOST 22233-93: Extruded sections of aluminium alloys for enclosure building structures. General specifications
The Document References:
GOST 10198-91: Wooden boxes for weights of mass over 200 up to 20000 kg. General specifications
GOST 10354-82: Polyethylene film Specifications
GOST 10929-76: Reagents. Hydrogen peroxide. Specifications
GOST 11739.11-82: Aluminium casting and deformable alloys. Methods for determination of magnesium
GOST 11739.11-98: Aluminium casting and wrought alloys. Methods for determination of magnesium
GOST 11739.12-82: Aluminium casting and deformable alloys. Methods for determination of manganese
GOST 11739.12-98: Aluminium casting and wrought alloys. Methods for determination of manganese
GOST 11739.13-82: Aluminium casting and deformable alloys. Methods for determination of copper
GOST 11739.13-98: Aluminium casting and wrought alloys. Methods for determination of copper
GOST 11739.1-90: Aluminium casting and wrought alloys. Methods for determination of aluminium oxide
GOST 11739.20-82: Aluminium casting and deformable alloys. Methods for determination of titanium
GOST 11739.20-99: Aluminium casting and wrought alloys. Methods for determination of titanium
GOST 11739.21-90: Aluminium casting and wrought alloys. Methods for determination of chromium
GOST 11739.24-82: Aluminium casting and deformable alloys. Methods for determination of zinc
GOST 11739.24-98: Aluminium casting and wrought alloys. Methods for determination of zinc
GOST 11739.6-82: Aluminium casting and deformable alloys. Methods for determination of iron
GOST 11739.6-99: Aluminium casting and wrought alloys. Methods for determination of iron
GOST 11739.7-82: Aluminium casting and deformable alloys. Methods for determination of silicon
GOST 11739.7-99: Aluminium casting and wrought alloys. Methods for determination of silicon
GOST 12082-82: Roof boarding for consignments up to 500 kg. General specifications
GOST 13624-90: Extruded rectangular flanged channel-section shapes of aluminium and magnesium alloys. Dimensions
GOST 14192-77: Marking of cargoes
GOST 14192-96: Cargo marking
GOST 1497-84: Metals. Methods of tension test
GOST 15140-78: Paintwork materials. Methods for determination of adhesion
GOST 16295-82: Packing anticorrosive paper. Specifications
GOST 16295-93: Anticorrosion paper
GOST 166-89: Vernier callipers. Specifications
GOST 16711-84: Paraffin paper base
GOST 18477-79: Universal containers
GOST 19300-86: Instruments for measurement of surface roughness by the profile method. Contact profilographs and profilometers. Types and main parameters
GOST 21631-76: Sheets of aluminium and aluminium alloys. Specifications
GOST 21650-76: Means of fastening tared and break bulk cargoes in the loads units. General requirements
GOST 22225-76: Containers multipurpose gross weight 0,625 and 1,25 t. Specifications
GOST 22233-93: Extruded sections of aluminium alloys for enclosure building structures. General specifications
GOST 2228-81: Paper for bags
GOST 23616-79: System of ensuring of geometrical accuracy of parameters in construction. Control of accuracy
GOST 24047-80: Half-finished products out of non-ferrous metals and their alloys. Sampling for tensile test
GOST 24231-80: Non-ferrous metals and alloys. General requirements for sampling and sample preparation for chemical analysis
GOST 24634-81: Wooden boxes for export products. General specifications
GOST 25951-83: Thermoshrinking polyethylene film. Specifications
GOST 26602.1-99: Windows and doors. Methods of determination of resistance of thermal transmission
GOST 26877-91: Metal products
GOST 28702-90: Non-destructive testing. Ultrasonic thickness gauges. General technical requirements
GOST 28840-90: Machines for tension, compression and bending tests of materials
GOST 2912-79: Chrome oxide technical. Technical conditions
GOST 29309-92: Coating of lacquers and paints. Determination of strength under the tension
GOST 29319-92: Paints and varnishes. Visual comparison of the colour of paints
GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications
GOST 31014-2002: Glass filled poliamides profils. Specifications
GOST 3560-73: Sealing tepe
GOST 3749-77: Checking 90° squares. Specifications
GOST 4233-77: Reagents. Sodium chloride. Specifications
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 4461-77: Reagents. Nitric acid. Specifications
GOST 4765-73: Pain and lacquer materials. Method of determination impact resistance
GOST 5100-85: Soda ash technical. Technical conditions
GOST 515-77: Bitumized and tarred packaging paper
GOST 5959-80: Uncollapsable wooden sheet material boxes for weights to 200 kg mass. General specifications
GOST 61-75: Reagents. Acetic acid. Specifications
GOST 6507-90: Micrometers. Specifications
GOST 6552-80: Reagents. Orthophosphoric acid. Specifications
GOST 6709-72: Distilled water. Specifications
GOST 6806-73: Paint and lacquer materials. Method for determination of film elasticity in bending
GOST 7376-89: Corrugated paperboard
GOST 7502-98: Measuring metal tapes. Specifications
GOST 7727-81: Aluminium alloys. Methods of spectral analysis
GOST 8828-89: Base paper and two-layer waterproof packaging paper
GOST 8832-76: Paintwork materials. Methods for formation of paint coating for testing
GOST 896-69: Paints and varnishes. Photoelectrical method for determination of gloss of coatings
GOST 9.031-74: Unified system of corrosion and ageing protection. Anode-oxide coatings for semifinished products made out of aluminium and alloys. General requirements and methods of control
GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations
GOST 9.301-86: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. General requirements
GOST 9.302-88: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods
GOST 9.308-85: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Procedures for accelerated corrosion tests
GOST 9.410-88: Unified system of corrosion and ageing protection. Powder polymeric coatings. Typical technological processes
GOST 9.510-93: Unified system of corrosion and ageing protection. Aluminium and aluminium alloys semifinished products. General requirements for temporary anticorrosive protection, packing, transportation and storage
GOST 9347-74: Board for gaskets and gaskets cut of it. Specifications
GOST 9569-79: Paraffin paper
The Document is Referenced By:
GOST 11214-2003: Windows of wood with glass. Specifications
GOST 21519-2003: Windows of aluminium. Specifications
GOST 23747-2015: Door blocks of aluminium profiles. Specifications
GOST 23747-88: Doors of aluminium alloys. Specifications
GOST 24699-2002: Windows of wood with glass and glassing units. Specifications
GOST 25097-2002: Windows from wood and aluminium. Specifications
GOST 30970-2002: Doors of polyvinylchloride profiles. Specifications
GOST 30970-2014: Door blocks of polyvinylchloride profiles. Specifications
GOST 31014-2002: Glass filled poliamides profils. Specifications
GOST 31174-2003: Gates of metall. General specifications
GOST 31174-2017: Gates of metall. General specifications
GOST 31462-2011: Safety windows. General specifications
GOST 33125-2014: Sun shading devices. Specifications
GOST 34329-2017: Formworks. General specifications
GOST 475-2016: Door Blocks wooden and combined. General specifications
GOST R 52085-2003: Formworks. General specifications
GOST R 54858-2011: Translucent facade construction. Method for determination of thermal transmission resistance
GOST R 57788-2017: Protective blocks for windows and doors in protected premises. General specifications
GOST R 58031-2017: Site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above. Design and manufacture rules
GOST R 58154-2018: Materials for substructure of hinged ventilated facade systems. General technical requirements
Manual for SNiP II-3-79*: The allowance for the heat engineering calculation of inventory buildings (mobile, container and collapsible)
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
RMD 23-16-2012 Sankt-Peterburg: Recommendations for energy efficiency in residential and public buildings
RMD 51-25-2018 St. Petersburg: Recommendations for the design, installation and operation of facade systems for new construction, reconstruction and repair of residential and public buildings in St. Petersburg. Part II Recommendations for the operation and repair of facade systems for new construction and reconstruction of residential and public buildings in St. Petersburg
RMD 56-05-2008 Sankt-Peterburg: Recommendations for the design, manufacture and installation of translucent structures with safety glazing
RMD 56-05-2015 Saint-Petersburg: Recommendations for the design, manufacture and installation of translucent structures with safety glazing (2016 edition)
SP 128.13330.2012: Aluminium structures
SP 128.13330.2016: Aluminium structures
SP 23-101-2004: Design of thermal protection of buildings
SP 363.1325800.2017: Translucent coating and lights of buildings and structures. Desing rules
SP 426.1325800.2018: Structures front translucent buildings and structures. Design rules
TU 5271-001-48810984-00: Window structures made of aluminum alloys for fencing balconies and loggias
Customers Who Viewed This Item Also Viewed:
 |
Jet fuels
Language: English |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Four-wheel bogies of freight cars for mainline railways gauge 1520 (1524) mm. Specifications
Language: English |
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English |
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English |
Technical ethylcellosolve. Specifications
Language: English |
Railway rolling stock. Devices to prevent running gear parts from dropping to the track. Methods of controlling strength characteristics
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Locomotives The method of dynamic strength tests
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.