GOST 24643-81
ГОСТ 24643-81
|
|
Basic norms of interchangeability. Tolerances of form and position of surfaces. Numerical values
Основные нормы взаимозаменяемости. Допуски формы и расположения поверхностей. Числовые значения
Status: Valid - Supersedes
The standard applies to tolerances of the shape of the surfaces of machine parts and devices and sets the numerical value of the tolerances. The numerical values of the tolerances of the form and the location of the surfaces should be applied to assembly units in mechanical engineering and other industries.
Стандарт распространяется на допуски формы расположения поверхностей деталей машин и приборов и устанавливает числовое значение допусков. Числовые значения допусков формы и расположения поверхностей должны применяться для сборочных единиц в машиностроении и в других отраслях промышленности.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee for Standards,
3/18/1981
SKU: RUSS69803
The Product is Contained in the Following Classifiers:
Standards for pipe fittings (TPA) »
8. Piping valves (TPA) design »
8.1 General design issues piping valves (TPA) »
8.1.2 Interchangeability and other design requirements »
ISO classifier »
21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES »
21.020 Characterization and design of mechanisms, instruments and equipment »
National standards »
21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES »
21.020 Characterization and design of mechanisms, instruments and equipment »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G1 General parts and units of machines »
G12 Tolerances and fits »
National Standards for OKSTU »
SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS »
General rules and regulations for mechanical engineering »
The Document References:
GOST 2.308-79: Unified system for design documentation. Representation of limits of forms and surface lay-out on drawings
GOST 24642-81: Basic norms of interchangeability. Tolerances of form and position. Basic terms and definitions
GOST 25346-89: Basic norms of interchangeability. Unified system of tolerances and fits. General, series of tolerances and fundamental deviations
The Document is Referenced By:
Album A 31.0105.01-89: Control parts. Handwheels, rotary handles, knobs, buttons. Design and dimensions
ATK 26-01-1-89: Pipeline viewing lights. Types and designs
GOST 10047-62: High speed steel cutting tools. Specifications
GOST 10110-87: Circles diamond
GOST 10272-77: Double entry centrifugal pumps. Specification
GOST 10480-88: Powder metal compacting mechanical automatic machines. Parameters and dimensions. Norms of accuracy
GOST 10560-88: Hydraulic sheet bending presses. Parameters and dimensions. Norms of accuracy
GOST 10617-83: Heating boilers with heat output heating capacity from 0.10 to 3.15 mw
GOST 10657-80: Round nuts slotted on face. Specifications
GOST 10905-86: Surface plates and face-plates. Specifications
GOST 11713-78: Tractor and combine diesels. Flywheels. General technical conditions
GOST 11823-91: Check valves for stipulated pressure of pn < 25 MPa (250 kgf/sm2)
GOST 11871-80: Slotted round nuts, product grade A. Specifications
GOST 11871-88: Slotted round nuts, product grade A. Specifications
GOST 12209-66: Holding devices. Cylindrical locating pins of permanent type. Design
GOST 12210-66: Holding devices. Cut locating pins of permanent type. Design
GOST 12211-66: Holding devices. Cylindrical locating pins of changeable type. Design
GOST 12212-66: Holding devices. Cut locating pins of changeable type. Design
GOST 12214-66: Holding devices. Bushes for indexes and locating pins with bead. Design
GOST 12215-66: Holding devices. Bushes for indexes and locating pins. Design
GOST 12468-67: Eccentrics double-supported. Design
GOST 12482-67: Rollers. Design
GOST 12893-2005: Single-seated, double-seated and cage control valves. General specifications
GOST 12893-83: Single-seated, double-seated and cage control valves.
GOST 12944-67: Equal-angle for clamping of machine retaining devices. Design and dimensions
GOST 12945-67: Unequal angle plates for machine retaining devices. Design and dimensions
GOST 12947-67: Steel plates for machine retaining devices. Design and dimensions
GOST 12948-67: Cast iron plates for machine retaining devices. Design and dimensions
GOST 12950-67: Channels for machine retaining devices. Design and dimensions
GOST 12951-67: Angle plates for machine retaining devices. Design and dimensions
GOST 12952-67: Ribbed angle plates for machine retaining devices. Design and dimensions
GOST 12953-67: Trihedrons for machine retaining devices. Design and dimensions
GOST 12955-67: Right ribs for machine retaining devices. Design and dimensions
GOST 12956-67: Left ribs for machine retaining devices. Design and dimensions
GOST 12957-67: Right side ribs for machine retaining devices. Design
GOST 12958-67: Left side ribs for machine retaining devices. Design and dimensions
GOST 12960-67: Double-sided left ribs for machine retaining devices. Design and dimensions
GOST 12961-67: Claws for machine retaining devices. Design and dimensions
GOST 13040-67: Round nuts for tool holders. Dimensions
GOST 13113-83: Die bases for cold plastic working dies with guide posts located on central line. Construction and dimensions
GOST 13121-83: Guide bushes with shoulders for cold plastic working dies. Construction and dimensions
GOST 13155-67: Bushes of tangential clamp for machine retaining devices. Design and dimensions
GOST 13156-67: Bushes of tangential clamps with thread hole for machine retaining devices. Design and dimensions
GOST 13157-67: Cone bushes for indexes of machine retaining devices. Design and dimensions
GOST 13160-67: Fixing devices with retractable handle for machine retaining devices. Design and dimensions
GOST 13161-67: Bayonet type indexes for machine retaining devices. Design and dimensions
GOST 13162-67: Rack type indexes for machine retaining devices. Design and dimensions
GOST 13219.17-81: Cups for ball bearings of pillow blocks. Technical requirements
GOST 13252-91: Swing check valves for Pnom £25 MPa (250 kgf/cm2). General specifications
GOST 13297-86: Diamond cutting tools and inserts
GOST 13524-68: Wheels with solid types for railless transport. Specifications
GOST 13547-2015: Pipeline valves. Butterfly wicket valves. General specifications
GOST 13547-79: Butterfly valves for pnom up to 2.5 MPa (25 kgf/cm2)
GOST 13944-86: Retaining spring flat rings and grooves for them. Specifications
GOST 14676-83: Sheet stamping dies. Guide ball assemblies for dies. Design and dimensions
GOST 14677-83: Sheet stamping dies. Plates-blanks for dies with four guide assemblies. Design and dimensions
GOST 14724-69: Eye bolts. Design
GOST 14725-69: Eye bolts with acme-thread. Design
GOST 14730-69: Blocks for finished machine tool slots. Design
GOST 14737-69: Screw fixed sunk keys. Construction
GOST 14738-69: Stepped keys. Design
GOST 14739-69: Round keys. Design
GOST 14740-69: Dowels. Design
GOST 14865-78: Setting rings for internal measuring instruments. Specifications
GOST 14901-93: Moulds for the manufacture of industrial rubber articles
GOST 14955-77: Quality round steel with a special surface finish
GOST 15127-83: Solid worm hobs for cutting of teeth on the sprockets for the driving roller chains and bush chains
GOST 15511-70: Back nuts for boring bars and boring arbors. Design
GOST 15512-70: Stop washer with inner joggle for boring bars. Design
GOST 1555-67: Plate thrusts for machine retaining devices. Design
GOST 15622-96: Safety slipping couplings. Parameters, design and dimensions
GOST 15861-81: Plate blanks rectangular of die sets for sheet stamping dies for dividing operations. Construction and dimensions
GOST 15864-81: Guide bushes for sheet stamping dies. Construction and dimensions
GOST 15876-90: Gauges for products made from wood and wooden materials
GOST 15961-89: Metal forging machines. General requirements for conditions and methods of accuracy measuring
GOST 16014-78: Diamond rollers for dressing of abrasive wheels. Specifications
GOST 16162-85: Standard reducers. General specifications
GOST 16181-82: Diamond grinding wheels
GOST 16211-70: Centre cone arbors. Design and dimensions
GOST 16212-70: Cylindrical centre arbors. Design and dimensions
GOST 16213-70: Cylindrical stepped centre arbors. Design and dimensions
GOST 16344-70: Rolling rolls. Construction and dimensions
GOST 16509-89: Swing beam sheet-bending machines. Parameters and dimensions. Standards of accuracy
GOST 16518-96: Machine vice with hand and mechanical drives
GOST 16621-80: Round punches with diameter from 1 mm to 24 mm. Construction and dimensions
GOST 16623-80: Round punches with increased fit diameter. Construction and dimensions
GOST 16625-80: Round punches diameter from 24 mm to 52 mm. Construction and dimensions
GOST 16626-80: Quick-changing round punches for ball mounting. Construction and dimensions
GOST 16629-80: Quick-changing round punches for screw mounting. Construction and dimensions
GOST 16631-80: Square punches. Construction and dimensions
GOST 16632-80: Quick-changing square punches. Construction and dimensions
GOST 16633-80: Oblong punches. Construction and dimensions
GOST 16634-80: Quick-changing oblong punches. Construction and dimensions
GOST 16635-80: Elongated oblong punches. Construction and dimensions
GOST 16637-80: Female dies with round hole. Construction and dimensions
GOST 16638-80: Reinforced female dies with round hole. Construction and dimensions
GOST 16639-80: Female dies with round hole and flange. Construction and dimensions
GOST 16640-80: Reinforced female dies with round hole and flange. Construction and dimensions
GOST 16641-80: Quick-changing female dies with round hole. Construction and dimensions
GOST 16642-80: Female dies with square hole. Construction and dimensions
GOST 16643-80: Quick-changing female dies with square hole. Construction and dimensions
GOST 16644-80: Female dies with oblong hole. Construction and dimensions
GOST 16645-80: Quick-changing female dies with oblong hole. Construction and dimensions
GOST 16646-80: Female dies with elongated oblong hole. Construction and dimensions
GOST 16647-80: Quick-changing female dies with elongated oblong hole. Construction and dimensions
GOST 16722-71: Shanks for dies of sheet pressing. Technical requirements
GOST 17006-80: Diamond cylinder wheels
GOST 17007-80: Disk diamond wheels
GOST 17122-85: Diamond grinding heads
GOST 17252-71: Arbor ends for mounting of countersinks during inverse undercutting. Design and dimensions
GOST 17385-72: Guide pins of plastic moulds and die casting dies. Construction and dimensions
GOST 17386-72: Step-shaped guide pins of plastics moulds and die casting dies. Construction and dimensions
GOST 17387-72: Guide bushings of plastics moulds and die casting dies. Construction and dimensions
GOST 17388-72: Long-sized guide bushings of plastics moulds and die casting dies. Construction and dimensions
GOST 17389-72: Step-shaped guide bushings of plastics moulds and die casting dies. Construction and dimensions
GOST 17390-72: Supporting pins of plastics moulds and die casting dies. Construction and dimensions
GOST 17573-72: Multiball hard differential rollers by diameters from 40 to 300 mm for dimension-finishing of openings of machine components by pressure. Design and dimensions
GOST 17666-72: Ejector pins of units for changeable sheet stamping cutting dies. Construction and dimensions
GOST 17695-72: Antifriction bearing assemblies with stationary retainer for sheet stamping dies. Construction and dimensions
GOST 17734-88: Knee-type millers. Standards of accuracy and rigidity
GOST 17774-72: Pins locating cylindrical high. Design
GOST 17775-72: Pins locating cut high. Design
GOST 18097-93: Screw-cutting lathes and lathes. Basic dimensions. Standards of accuracy
GOST 18126-94: Bolts and nuts with thread diameter over 48 mm. General specifications
GOST 18435-73: Jig bushes. Technical requirements
GOST 18437-73: Notched straight-side cone centre arbors. Design and dimensions
GOST 18438-73: Notched straight-side centre arbors. Design and dimensions
GOST 18439-73: Notched straight-side centre arbors with press fit of jobs. Design and dimensions
GOST 18440-73: Notched straight side sprindle arbors. Design and dimensions
GOST 18441-73: Intermediate rings. Design and dimensions
GOST 18514-73: End caps for rolling bearing blocks. Technical requirements
GOST 18733-80: Stop keys. Design and dimensions
GOST 18734-80: Scrap cutters. Design and dimensions
GOST 18735-80: Rectangular scrap cutters. Design and dimensions
GOST 18736-80: Overrunning stop cutting blades. Design and dimensions
GOST 18737-80: Overrunning stop cutting blades with lugs. Design and dimensions
GOST 18743-80: Mushroom-shaped stops. Design and dimensions
GOST 18745-80: Hook stops. Design and dimensions
GOST 18777-80: Round cross-bars. Design and dimensions
GOST 18778-80: Three-support cross-bars. Design and dimensions
GOST 18780-80: Punchers. Design and dimensions
GOST 18812-81: Sheet stamping dies. Holders for guide posts with flute and guide bushes. Design and dimensions
GOST 19857-74: Rectangular plates for sheet stamping cupping dies (blanks). Construction and dimensions
GOST 19858-74: Round plates for sheet stamping cupping dies (blanks). Construction and dimensions
GOST 19946-74: Dies for casting of non-ferrous alloys. Specifications
GOST 2.308-2011: Unified system of design documentation. Representation of limits of forms and surface lay-out on drawings
GOST 2.308-79: Unified system for design documentation. Representation of limits of forms and surface lay-out on drawings
GOST 20404-88: Machines for sharpening circular saws. Norms of accuracy and rigidity
GOST 20505-75: Driver chucks for pivoting arbours for turret lathes. Design and dimensions
GOST 20700-75: Bolts, studs, nuts and washers for flanged and anchor connections, corks and yokes with medium temperature from 0 to 650 °C. Specifications
GOST 20761-96: Flange couplings. Parameters, design and dimensions
GOST 20889-88: Pulleys for driving V-belts with normal sections. General specifications
GOST 20925-75: Units of changeable press-moulds with low positioned loading chamber for moulding thermoset articles. Construction and dimensions
GOST 20929-75: Plates-blanks of changeable press-moulds for moulding thermoset articles. Construction and dimensions
GOST 20932-75: Loading moulding for loose press-moulds. Construction and dimensions
GOST 21167-75: Machine bar centering vices with screw and lever. Design and main dimensions
GOST 21168-75: Machine bar centering vices with screw and prismatic jaws. Design and main dimensions
GOST 21345-2005: Ball, lifting-plug and cylindrical cocks for nominal pressure at most PN 250. General specifications
GOST 21345-78: Conical, ball and cylindrical cocks set at рnom of up to approx. 16 MPa ( 160 kgf/cm2)
GOST 21459-82: Removable guides for sheet stamping dies. Construction and dimensions
GOST 21694-82: Welding mechanical equipment. General technical requirements
GOST 21694-94: Mechanical welding equipment
GOST 21834-87: High-precision heavy-duty transmission roller chains
GOST 21884-83: Sheet stamping dies. Intermediate plates-blanks for dies with diagonally positioned guide sliding assemblies. Design and dimensions
GOST 21885-83: Sheet stamping dies. Intermediate plates-blanks for dies with axially positioned guide sliding assemblies. Design and dimensions
GOST 21938-76: Chucks for thread cutting on lathes. Design and dimensions
GOST 21939-76: Die sleeves of chucks for thread cutting on lathes. Design and dimensions
GOST 21940-76: Tap sleeves of chucks for thread cutting on lathes. Design and dimensions
GOST 21941-76: Die chucks for turret lathes. Design and dimensions
GOST 21942-76: Sleeves of die chucks for turret lathes. Design and dimensions
GOST 22082-76: Injection mould bases, detail-blanks and details of injection moulds. Specifications
GOST 22190-83: Disk spring buffers for sheet stamping dies. Design and dimensions
GOST 22199-83: Buffer holders for sheet stamping dies. Design and dimensions
GOST 22200-83: Buffer holders with body size hole for sheet stamping dies. Design and dimensions
GOST 22472-87: Dies for a sheet-metal stamping
GOST 22525-77: Threaded pipeline connections. Pipe nipple ends for union nuts. Construction
GOST 22559-77: Shanks of press-moulds for pressure moulding of thermoset articles. Construction and dimensions
GOST 22601-77: Control bars. Specifications
GOST 22628-77: Sockets for tapping chucks for turret-lathes. Design and dimensions
GOST 22630-77: Sockets for movable chasing chucks for automatic lathes. Design and dimensions
GOST 22691-77: Packaging cushioning materials. Test of impact protective properties
GOST 22790-83: Assembly units and pipelines components, designed for рnom over 10 to 100 MPa (from 100 to 1000 kgf/cm2). General specifications
GOST 22790-89: Assembly units and pipelines components, designed for рnom over 10 to 100 MPa (from 100 to 1000 kgf/cm2)
GOST 23.208-79: Ensuring of wear resistance of products. Wear resistance testing of materials by friction against loosely fixed abrasive particles
GOST 23301-78: Universal readjustable dies for element-by-element stamping. Technical requirements
GOST 24023-80: Round punches with elongated working part. Construction and dimensions
GOST 24106-80: Nitride bore grinding wheels
GOST 24201-80: Connective and fastening components of glass pipelines
GOST 24246-96: Box clutches. Parameters, design and dimensions
GOST 24401-80: Casting die beams. Construction and dimensions
GOST 2447-82: Mounted grinding wheels
GOST 24512-80: Press-moulds multi-place removable for manufacturing of rubber O-rings section. Construction and dimensions
GOST 24514-80: Packets quick-changing with conical break of press-moulds for manufacturing of rubber O-rings section. Construction and dimensions
GOST 24515-80: Packets quick-changing with horizontal break of press-moulds for manufacturing of rubber O-rings section with inner diameter from 2,8 up to 9,7 mm. Construction and dimensions
GOST 24516-80: Packets quick-changing with horizontal break of press-moulds for manufacturing of rubber O-rings section. Construction and dimensions
GOST 24519-80: Sets of two-cassette press-moulds for manufacture of rubber toroidal sealing rings. Design and dimensions
GOST 24528-80: Flanged overrunning stop cutting blades. Design and dimensions
GOST 24529-80: Flanged overrunning stop cutting blades with lugs. Design and dimensions
GOST 24533-80: Pin-hole punches. Design and dimensions
GOST 24534-80: Bushes for pin-hole punches. Design and dimensions
GOST 24536-80: Rod stops. Design and dimensions
GOST 24558-81: Sheet stamping dies. Guide bushes for guide posts with flute. Design and dimensions
GOST 24638-85: Annular diamond drills for reinforced concrete constructions
GOST 24829-81: The sets of three cassette press moulds for manufacturing of rubber sealing cups. Design and dimensions
GOST 24932-81: Gauges for tapered joints. Tolerances
GOST 25.505-85: Design, calculation and strength testing. Methods of mechanical testing of metals. Method of testing on the low cycle fatigue at heat mechanical loading
GOST 25084-89: Universal dies with replaceable built-up tool sets
GOST 25088-98: Ship's doors. Specifications
GOST 25105-82: Plain bearings metal bushes and half-liners for pulley-blocks and split bearing blocks. Technical requirements
GOST 25106-82: Plain bearing housings one-piece and sectional
GOST 25223-82: Wood-working equipment
GOST 25307-82: Basic norms of interchangeability. Cone joining system of limits and fits
GOST 25309-94: Covers of access hatches. Specifications
GOST 25310-94: Covers of skylights. Specifications
GOST 25479-82: Packets of three-cassettes press moulds for manufacturing the rubber-fabric chevron cuffs. Design and dimensions
GOST 25480-82: Packets of three-cassettes press moulds for manufacturing the rubber-fabric locking rings. Design and dimensions
GOST 25570-82: Hatch covers of tank for petroleum products. Types, main parameters and dimensions
GOST 25920-83: Sheet stamping dies. Intermediate plates-blanks for dies with four guide sliding assemblies. Design and dimensions
GOST 26007-83: Strength calculations and tests. Methods of mechanical testing of metals
GOST 26238-84: Normal and high precision jig bushes. Technical requirements
GOST 26238-93: Jib bushes. Specifications
GOST 26298-84: Portable ream press moulds with conical break for manufacturing of rubber O-rings section. Design and dimensions
GOST 26314-84: Stationary ship's ladders. Specifications
GOST 26314-98: Stationary ship's ladders. Specifications
GOST 26338-84: Threaded piping joints. Tolerances of form and position
GOST 26339-84: Annular diamond drills
GOST 26396-84: Tools for cold upset automatic machines. Dies for cutting off bolt blanks. Construction and dimensions
GOST 26397-84: Tools for cold upset automatic machines. Bolt heading dies. Construction and dimensions
GOST 26405-84: Tools for manufacturing bolts and nuts using cold heading machines
GOST 26446-85: Brazed and soldered joints
GOST 26505-85: Tools for cold-forming machines. Gutters Construction and dimensions
GOST 26506-85: Tools for cold-forming machines. Dies for cutting ofnut blanks. Construction and dimensions
GOST 26507-85: Tools for cold-forming machines. 1 St station dies. Construction and dimensions
GOST 26508-85: Tools for cold-forming machines. 2Nd station dies. Construction and dimensions
GOST 26509-85: Tools for cold-forming machines. 3rd station dies. Construction and dimensions
GOST 26510-85: Tools for cold-forming machines. 4Th station dies. Construction and dimensions
GOST 26511-85: Tools for cold-forming machines. 5Th station dies. Construction and dimensions
GOST 26512-85: Tools for cold-forming machines. 1St station punches. Construction and dimensions
GOST 26513-85: Tools for cold-forming machines. 2-D station punches. Construction and dimensions
GOST 26514-85: Tools for cold-forming machines. 3rd station punches. Construction and dimensions
GOST 26515-85: Tools for cold-forming machines. 4Th station punches. Construction and dimensions
GOST 26516-85: Tools for cold-forming machines. 5Th station punches. Construction and dimensions
GOST 26957-97: Variators with wide-angle belt pulleys. General specifications
GOST 27358-87: Press moulds for manufacturing of plastic items
GOST 28122-89: Grinding and polishing machine tools for stone working. General technical requirements and test methods
GOST 28122-95: Stone-working grinding-polishing machines
GOST 28541-90: Stone-sawing machines. General technical requirements and test methods
GOST 28541-95: Stone-cutting machines
GOST 28650-90: Grinders for frame saws. Basic parameters. Norms of accuracy
GOST 28651-90: Sharpening machines for band saws. Basic parameters. Standards of accuracy
GOST 29096-91: Cycles. Safety requirements of bicycles
GOST 3.1128-93: The unified system of technological documentation. General rules for drawing up of graphical technological documents
GOST 30027-93: Drilling-milling-boring flexible manufacturing modules and machines centres. Standards of accuracy
GOST 30098-93: Electro erosion copy piercing machines. Basic dimensions. Standards of accuracy
GOST 30222-95: Cone variable speed drives. General specifications
GOST 3033-79: Eye bolts. Design and dimensions
GOST 30352-96: Diamond grinding wheels for treatment of household and art glass
GOST 30369-96: Stone milling machines General technical requirements and control methods
GOST 30673-2013: Polyvinylchloride profiles for windows and doors. Specifications
GOST 30673-99: Polyvinylchloride profiles for windows and doors. Specifications
GOST 30735-2001: Heating hot-water boilers with capacity from 0,1 to 4,0 MW. General specifications
GOST 30851.1-2002: Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB'S). Part 1. General rules
GOST 30851.2.2-2002: Appliance couplers for household and similar general purposes. Part 2-2. Particular requirements for interconnection couplers for household and similar equipment. Requirements and methods of tests
GOST 31.0101.01-89: Hand wheels, rotating levers, handles, and knobs
GOST 31.0151.01-90: Universal and special-purpose setters
GOST 31.0171.01-91: Devices for metal cutting machine tools. Parts and assembly units of general application. General technical requirements
GOST 31.1066.01-85: Attachments for metall-cutting machine tools. Central readjustable mandrels with corrugated bushings for precision machining. Basic parameters and dimensions
GOST 31.1066.02-85: Attachments for metall-cutting machine tools. Mandrels with split collets for precision machining. Basic parameters and dimensions
GOST 31.1066.03-97: Central arbors for exact operations
GOST 31.111.41-83: System of standards for technological arrangement. Elements and assembly juntions of universal assembly devices for metal-cutting machines. Basic parameters. Constructive elements. Precision norms
GOST 31.111.41-93: Parts and assembly units of universal assembly devices for metal-cutting machines. Basic parameters. Constructive elements. Norms of accuracy
GOST 31.121.41-84: Elements and assemblies of universal built-up and readjusted equipment for metal-cutting machines (ubre)
GOST 31.211.41-93: Parts and assembly units of collapsible fixtures for assembly and welding
GOST 31294-2005: Direct-acting safety valves. General specifications
GOST 31522-2012: Food processing machinery. Dough and pastry brakes. Specifications
GOST 31523-2012: Food processing machinery. Dough mixers. Specifications
GOST 31524-2012: Food processing machinery. Moulders. Specifications
GOST 31527-2012: Food processing machinery. Intermediate provers. Specifications
GOST 31592-2012: Machine reducers. General specifications
GOST 31741-2012: Bicycles. General specifications
GOST 31835-2012: Well sucker-rod pumps. General technical requirements
GOST 32833-2014: Diamond cutting-off wheels. Specifications
GOST 33423-2015: Pipeline valves. Swing and lift check valves. General specifications
GOST 34347-2017: Steel welded vessels and apparatus. General technical conditions
GOST 34610-2019: Pipe fittings. Electric drives. General specifications
GOST 34914-2022: Windows for industrial buildings. General technical conditions
GOST 5147-80: Joint clutches. Basic parameters. Design and dimensions
GOST 5147-97: Joint couplings. Parameters, design and dimensions
GOST 538-2001: Locks and building hardware. General specifications
GOST 538-2014: Locks and building hardware. General specifications
GOST 5384-89: Knuckle-joint cold stamping presses. Parameters and dimensions. Dimensions and arrangement of the slots and openings for fixing the tools. Norms of accuracy
GOST 538-88: Lock and building hardware
GOST 5688-2015: Tools with carbide tips. Specifications
GOST 5688-61: Tools with carbide tips. Specifications
GOST 5761-2005: Valves for nominal pressure at most PN 250. General specifications
GOST 5762-2002: Pipeline industrial valves. Gate valves PN<=250. General specifications
GOST 6271-90: Diamond dies
GOST 6393-73: Round nuts with set pin holes in side, product grade A. Design and dimensions
GOST 6414-87: Automatic five-position nut cold upsetters. Parameters and dimensions. Norms of accuracy
GOST 6512-74: Metering spur gears. Specifications
GOST 6809-87: Hot stamping crank presses. Basic parameters and dimensions. Norms of accuracy
GOST 713-88: Screw presses. Рarameters and dimensions, norms of accuracy
GOST 8381-73: Round nuts with radially spaced holes, product grade A. Design and dimensions
GOST 8592-79: Rotating electrical machines. Mounting and connecting dimensions. Tolerances and control methods
GOST 8965-75: Connecting parts made of steel, with parallel thread, for pipelines of pressure p = 1.6 мpа
GOST 9061-68: Round eccentric cams for machine retaining devices. Design
GOST 9324-80: Finishing single-thread hobs for involute spur-wheels
GOST 9399-81: Threaded steel flanges for Pn 20-100 MPa (200-1000 kgf/sq sm). Specifications.
GOST 9416-83: Building levels. Technical requirements
GOST 9570-2016: Box and pestpallets. General specifications
GOST 9570-84: Box and post pallets
GOST R 50641-94: Grooved pulleys for classical and narrow V-belts. System based on datum width
GOST R 50891-96: Machine reducers. General specifications
GOST R 51325.1-99: Appliance couplers for household and similar general purposes. Requirements and methods of tests
GOST R 51325.2.2-99: Appliance couplers for household and similar general purposes. Part 2-2. Particular requirements for interconnection couplers for household and similar equipment. Requirements and methods of tests
GOST R 51896-2002: Well sucker-rod pumps. General technical requirements
GOST R 52111-2003: Bicycles. General specifications
GOST R 52118-2003: Reference materials of nuclear materials for radiation monitors. General technical requirements and testing methods
GOST R 52630-2006: Steel welded vessels and apparatus. General specifications
GOST R 52630-2012: Steel welded vessels and apparatus. General specifications.
GOST R 53140-2008: Food processing machinery. Intermediate provers. Specifications
GOST R 53192-2008: Welded steel structures of freight cars. Technical requirements
GOST R 53473-2009: Food processing machinery. Moulders Specifications
GOST R 53477-2009: Food processing machinery. Dough and pastry brakes. Specifications
GOST R 53478-2009: Food processing machinery. Dough mixers. Specifications
GOST R 53671-2009: Pipeline valves. Swing and lift check valves. General specifications
GOST R 53673-2009: Pipeline valves. Butterfly wicket valves. General specifications
GOST R 53808-2010: Automobile engines. Camshafts. Technical requirements and test methods
GOST R 53923-2010: Diamond and cubic boron nitride (elbor) grinding wheels. Specifications
GOST R 54786-2011: Fastening parts for detachable connections of nuclear power plants. Specifications.
GOST R 54829-2011: Heating boilers with forced draught burners, with nominal heat output not exceeding 10 MW and maximum operating temperature of 150 °C
GOST R 55429-2013: Hoop-in detachable joints of pipelines. Design, dimensions and general specifications
GOST R 55511-2013: Pipeline valves. Electric actuators. General specifications
GOST R 55599-2013: High pressure pipeline assembly units and components above 10 up to 100 MPa. General technical requirements
GOST R 56001-2014: Pipeline valves for objects of gas industry. General specifications
GOST R 56578-2015: Mounted wheels. Specifications
GOST R 57383-2017: Mechanical key locks with a lever block of secret. Classification for resistens to unlocking without destruction
GOST R 58514-2019: Building levels. Technical conditions
GOST R 59620-2022: Public roads. Spherical (spherical segmental) combined bearing parts for bridge structures. General specifications
GOST R 70595-2022: Shipboard fittings. General specifications
GOST R 8.1015-2022: State System for Ensuring Uniformity of Measurements (GSI). Metrological expertise of normative and technical documentation in the field of atomic energy use. Organization and basic requirements to the content
GOST R 8.623-2006: State system for ensuring the uniformity of measurements. Relative dielectric permittivity and the loss tangent of solid dielectrics. Procedures of measurements at microwave frequencies
GOST R 8.623-2015: State system for ensuring the uniformity of measurements. Relative dielectric permittivity and the loss tangent of solid dielectrics. Procedure of measurements at microwave frequencies
Manual: Manual for impulse and low consumption fire extinguishing systems
MI 2007-89: State system for ensuring uniformity of measurements. Testing and marking plates. Method of verification
MI 2106-90: Setting rings for measuring the diameters of the holes
OST 26-01-49-82: Assembling units and pipeline details for working pressure of 32 MPa (320 kgf/cm2). General specifications.
OST 26-07-1023-80: Automatic pipeline fittings. General specifications.
OST 26-07-1144-75: Electric drives for remote control of pipeline stop valving. General specifications.
OST 26-07-1232-87: General engineering pipeline fittings. Running thread pairs. Main dimensions. Technical requirements.
OST 26-07-2029-81: Boss assembly and valve hand levels. Construction and basic dimensions. Technical requirements.
OST 26-07-2033-81: Pipeline fittings. Safety valves. Connection unit of disk and disk holder. Design and dimensions. Technical requirements.
OST 26-07-2042-2002: Pipeline fittings. Shat-off valve gates with “metal-to-metal” sealing Technical requirements.
OST 26-07-2081-2002: Pipeline accessories. The closures of stop gates of the valve type, pressure relief valves and gate valves with a seal of PTFE-4 and composite materials. Technical requirements
OST 26-07-240-71: cast steel Flange with a pin or groove weld butt joint on Roux from 1 to 64 kgf / cm2. Design, dimensions and Technical requirements .
OST 26-07-596-72: Electric drives for pipeline fittings. Export including tropical climate countries. General requirements.
OST 26-07-794-73: General purpose cryogenic pipeline fittings. General specifications.
OST 26-2011-83: Welded vessels and apparatus hatches. Technical requirements.
OST 26-2043-91: Bolts, studs, nuts and washers for flanged joints. Technical requirements
OST 4 G0.059.295: Plates of attachments for removable mold connectors. Construction and dimensions
PB 03-384-00: Rules for design, manufacture and acceptance of steel welded vessels and apparatus
R 50-54-101-88: Recommendations. Methods for calculating the main indicators of industrial robots
RD 153-34.0-04.185-2003: Machines and equipment for construction, technical re-equipment and repair of energy facilities. Requirements for design, materials, manufacturing, acceptance and testing
RD 22-207-88: Lifting machines. General requirements and production standards
RD 24.207.08-90: Pipe fittings. Running threaded pairs. Main dimensions and technical requirements. Recommendations for use
RD 26.260.010-2002: The leading document on standardization. The list of standard documentation on standardization on the cells and devices working under pressure.
RD 302-07-21-93: Pipe fittings. Fluoroplast-4 seal closures. Design and technical requirements
RD 302-07-22-93: Pipe fittings. Packing glands. Construction and main dimensions. Technical requirements
RD 31.55.01.01-90: Spare parts for marine diesel engines of foreign construction. Steel piston heads. Technical requirements
RD 34 02.028-2007: Technical rules. Mechanical equipment and special steel structures for hydraulic structures. Manufacturing, installation and acceptance.
RD 36-62-00: Hoisting equipment. General technical requirements.
RD 50:48:0075.02.05: Platform buffers. Recommendations for design, construction and operation
RM 38.14.008-94: Guiding Material. Radial (centrifugal) and axial fans. Maintenance and repair.
RTM 108.940.08-85: Welded structures of power equipment. General requirements for structural and process design
ST TsKBA 006-2003: Pipe fittings. Cryogenic fittings. General technical conditions
ST TsKBA 017-2005: Pipe fittings. General technical conditions
ST TsKBA 037-2006: Pipe fittings. Packing glands. Construction, main dimensions and technical requirements
ST TsKBA 055-2008: Pipe fittings. Valves valves with fluoroplast-4 seal and composite materials. Technical requirements and methods of mounting the sealing rings
ST TsKBA 060-2008: Pipe fittings. Running threaded pairs. Main dimensions, technical requirements
ST TsKBA 063-2008: Pipe fittings. Tolerances on the dimensions of the basic elements of the nodes of valves of wedge gate valves
ST TsKBA 074-2009: Pipe fittings. Hubs and valve handles. Design, dimensions and specifications
ST TsKBA 087-2010: Pipe fittings. Electric drives. General technical conditions
ST TsKBA 090-2013: Pipe fittings. Pneumatic actuators and hydraulic actuators. General technical conditions
ST TsKBA 101-2011: Pipe fittings. Disc connection unit with safety valve disc holder. Design, dimensions and specifications
ST TsKBA 110-2013: Pipe fittings. Gland with a fusible metal seal. Designs and main dimensions. Technical requirements
TU 102-533-89: A set of structures on a building without a crane with arched span of 12, 15 and 18 m
TU 3742-001-96231033-2006: Swing check valve type 19s38nzh and 19s73nzh. Technical conditions
VMU 50:48:0075-02-02: Platform buffers. General requirements for design, construction and operation
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.