GOST 16093-2004

ГОСТ 16093-2004

Basic norms of interchangeability. Metric screw thread. Tolerances. Clearance fits

Основные нормы взаимозаменяемости.Резьба метрическая. Допуски. Посадки с зазором

Status: Effective - Supersedes. IUS 5-2005

The standard applies to general purpose metric threads with a profile according to GOST 9150, diameters and steps according to GOST 8724 and GOST 16967 and with main dimensions according to GOST 24705 and GOST 24706. Tolerances for threads with a diameter

Стандарт распространяется на метрические резьбы общего назначения с профилем по ГОСТ 9150, диаметрами и шагами по ГОСТ 8724 и ГОСТ 16967 и основными размерами по ГОСТ 24705 и ГОСТ 24706. Допуски для резьб диаметром менее 1мм - по ГОСТ 9000.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 46

Approved: Federal Agency for Technical Regulation and Metrology, 3/2/2005

SKU: RUSS69819

Price: $265.78




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 21 Mechanical systems and general purpose devices »

Standards for pipe fittings (TPA) » 8. Piping valves (TPA) design » 8.1 General design issues piping valves (TPA) » 8.1.2 Interchangeability and other design requirements »

ISO classifier » 21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES » 21.040 Screw threads » 21.040.10 Metric threads »

National standards » 21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES » 21.040 Screw Threads » 21.040.10 Metric threads »

National Standards for KGS (State Standards Classification) » Latest edition » G Machines, equipment and tools » G1 General parts and units of machines » G13 Threads »


As a Replacement Of:

GOST 16093-81: Basic norms of interchangebility. Metric screw thread. Tolerances. Clearance fits

The Document References:

GOST 1.0-92: State System for Standardization of Russian Federation. Basic principles

GOST 1.2-97: Interstate system for standardization. Interstate standards, rules and recommendations on interstate standardization. Procedure for development, taking over application, renovation and cancellation

GOST 11708-82: Basic norms of interchangeability. Screw thread. Terms and definitions

GOST 16093-81: Basic norms of interchangebility. Metric screw thread. Tolerances. Clearance fits

GOST 16967-81: Basic norms of interchangeability. Metric thread for instrument-making industry. Diameters and pitches

GOST 1759.4-87: Bolts, screws and studs. Mechanical properties and test methods

GOST 24705-2004: Вasic norms of interchangeability. Metric screw thread. Basic dimensions

GOST 24706-81: Basic norms of interchangeability. Metric thread for instrument-making industry. Basic dimensions

GOST 24997-2004: Gauges for metric thread. Tolerances

GOST 8724-2002: Basic norms of interchangeability. Metric screw threads. General plan

GOST 9000-81: Basic norms of interchangeability. Metric screw thread for diameters less than 1 mm. Tolerances

GOST 9150-2002: Basic norms of interchangeability. Metric screw threads. Profile

The Document is Referenced By:

GOST 10495-80: Hexagon nuts for flange joints for pn above 10 to 100 MPa (above 100 to 1000 kgf/cm2)

GOST 10607-94: Hexagon thin nuts (chamfered) with thread diameter over 48 mm. Product grade B. Specifications

GOST 11074-93: Hexagonal socket flat-point set screws. Product grades A and B. Specifications

GOST 11075-93: Hexagonal socket dog-point set screws. Product grades A and B. Specifications

GOST 11530-2014: Rail joint bolts. Specifications

GOST 11530-93: Rail joint bolts. Specifications

GOST 11532-2014: Nuts for rail joints. Specifications

GOST 1153-76: Supports for lavatories and sinks. Technical requirements

GOST 11646-82: Wheel fixing details and attachments for tractors, self propelled tool carriers, agricultural machines, tractor trailers and semitrailers. Dimensions

GOST 11823-91: Check valves for stipulated pressure of pn < 25 MPa (250 kgf/sm2)

GOST 11871-88: Slotted round nuts, product grade A. Specifications

GOST 12247-80: Large seamless steel gas cylinders for operating pressure of 31,4 and 39,2 MPa (320 and 400 kgf/cm sq.). Specifications

GOST 12595-2003: Metal-cutting machine tools. Flanged spindle noses of А type and flanges of fixtures. Basic and coupling dimensions

GOST 12893-2005: Single-seated, double-seated and cage control valves. General specifications

GOST 12893-83: Single-seated, double-seated and cage control valves.

GOST 13252-91: Swing check valves for Pnom £25 MPa (250 kgf/cm2). General specifications

GOST 13476-68: Aircraft. Cabins sealing test connections. Types and dimensions

GOST 13547-2015: Pipeline valves. Butterfly wicket valves. General specifications

GOST 13547-79: Butterfly valves for pnom up to 2.5 MPa (25 kgf/cm2)

GOST 13876-87: Spindle noses for modular type machines. Basic dimensions

GOST 14034-74: Centre holes. Dimensions

GOST 1476-93: Cone-point straight slatted set screws. Product grades A and B. Specifications

GOST 1477-93: Flat-point straight slotted set screws. Product grades A and B. Specifications

GOST 1478-93: Dog-point straight slotted set screws. Product grades A and B. Specifications

GOST 1479-93: Cup-point straight slotted set screws. Product grades A and B. Specifications

GOST 15062-2017: Seats for unitation. Specifications

GOST 15163-78: Tapered bolts of high precision. Specifications

GOST 1560-67: Screw ties for machine retaining devices. Design

GOST 15763-2005: Threaded and flange pipe connections for PN to 63 MPa (to 630 kgf/sq sm). General specifications

GOST 15763-91: Pipeline thread connections for Py up to 63 MPa (up to 630 kgf/cm2)

GOST 16016-2014: Clamp bolts for rail track fastenings. Specifications

GOST 16017-2014: Inserted bolts for rail track fastenings. Specifications

GOST 16018-2014: Nuts for clamp and inserted bolts of rail track fastenings. Technical specifications

GOST 16018-79: Nuts for clamp and inserted bolts of rail track fastenings

GOST 16181-82: Diamond grinding wheels

GOST 16549-71: Sleeve type iron plug valves with gland and blind flange for drainage for Py <= 10 kgf/sq.cm

GOST 16716-71: Threaded shanks for dies of sheet pressing. Construction and dimensions

GOST 16717-71: Shouldered and threaded shanks for dies of sheet pressing. Construction and dimensions

GOST 16720-71: Shanks with punch hole for dies of sheet pressing. Construction and dimensions

GOST 16818-85: Sand mould intended to produce the sample blanks for testing the mechanical properties of flaky graphite grey cast iron

GOST 16890-71: Plates for knee rack-and-pinion-operated jigs. Design

GOST 16893-71: Plates for portal rack-and-pinion-operated jigs. Design

GOST 17547-80: The work spindle noses of bevel gear producing machines. Basic dimensions

GOST 1759.0-87: Bolts, screws, studs and nuts. Specifications.

GOST 17695-72: Antifriction bearing assemblies with stationary retainer for sheet stamping dies. Construction and dimensions

GOST 18126-94: Bolts and nuts with thread diameter over 48 mm. General specifications

GOST 19125-90: Fittings of connections for airborne instruments. Design and dimensions

GOST 19354-74: Shaft line flange joints. Construction and dimensions

GOST 20868-81: Adjusting fixturing supports. Technical requirements

GOST 21336-75: Low knurled-head and round-point screws. Construction and dimensions

GOST 21345-2005: Ball, lifting-plug and cylindrical cocks for nominal pressure at most PN 250. General specifications

GOST 21345-78: Conical, ball and cylindrical cocks set at рnom of up to approx. 16 MPa ( 160 kgf/cm2)

GOST 21804-94: Shut-Off Devices for Cylinders With Liquefied Hydrocarbon Gases With Pressure Up To 1.6 Mpa

GOST 22130-2018: Steel piping details. Movable supports and hangers. Specifications

GOST 22623-77: Fixtures for spindle-operated electronic components. Basic dimensions

GOST 22790-89: Assembly units and pipelines components, designed for рnom over 10 to 100 MPa (from 100 to 1000 kgf/cm2)

GOST 23289-2016: Waste water drain sanitary accessories. Specification

GOST 23405-78: Pneumatic and hydraulic check valves. Types, main parameters and technical requirements

GOST 24379.1-2012: Foundation bolts. Structure and dimensions

GOST 24379.1-80: Foundation bolts. Structure and dimensions

GOST 24705-2004: Вasic norms of interchangeability. Metric screw thread. Basic dimensions

GOST 24997-2004: Gauges for metric thread. Tolerances

GOST 2575-79: Thrust centres with nut screwed-off nut. Design

GOST 26596-91: Non-adjustable milling cutters

GOST 26756-2016: Furniture for trade enterprises. General technical conditions

GOST 26862-86: Rins. General specifications

GOST 2822-78: Threaded ends of marine valves and fittings. Types, main characteristics and dimensions and technical requirements

GOST 28241-89: Hand wise. Specification.

GOST 2832-77: Adjusting rings with screw fastening. Dimensions

GOST 28433-90: Retrievers

GOST 28434-90: Overhead travelling stacker cranes

GOST 28778-90: Expansion bolt self-anchoring for building. Specifications

GOST 28919-91: Flange connections of wellhead equipment. Types, basic parameters and dimensions

GOST 28962-91: Hexagon socket head shoulder screws. Specifications

GOST 28963-91: Hexagon socket button head screws. Metric series. Specifications

GOST 28964-91: Hexagon socket set screws with cup point. Specifications

GOST 30176-95: Portable gas-turbine compressor stations of general purpose. General technical requirements

GOST 3032-76: Fly nuts. Construction and dimensions

GOST 30496-97: Emergency stop valves for pneumatic systems of railway rolling stock brake equipment. General specifications

GOST 30852.0-2002: Explosionproof electrical apparatus. Part 0. General requirements

GOST 30894-2003: Production well head equipment. General technical requirements

GOST 31.0101.01-89: Hand wheels, rotating levers, handles, and knobs

GOST 31.0151.01-90: Universal and special-purpose setters

GOST 31.0171.01-91: Devices for metal cutting machine tools. Parts and assembly units of general application. General technical requirements

GOST 31.1066.01-85: Attachments for metall-cutting machine tools. Central readjustable mandrels with corrugated bushings for precision machining. Basic parameters and dimensions

GOST 31.1066.02-85: Attachments for metall-cutting machine tools. Mandrels with split collets for precision machining. Basic parameters and dimensions

GOST 31.1066.04-97: Attachments for metal-cutting tools. Cam arbors. General specifications

GOST 31.111.41-93: Parts and assembly units of universal assembly devices for metal-cutting machines. Basic parameters. Constructive elements. Norms of accuracy

GOST 31.121.41-84: Elements and assemblies of universal built-up and readjusted equipment for metal-cutting machines (ubre)

GOST 31.2031.02-91: Readjusted collapsible devices for part assembly under welding

GOST 31.211.41-93: Parts and assembly units of collapsible fixtures for assembly and welding

GOST 31294-2005: Direct-acting safety valves. General specifications

GOST 31311-2005: Heating devices. General specifications

GOST 31610.0-2012: Electrical apparatus for explosive gas atmospheres. Part 0. General requirements

GOST 31610.0-2014: Explosive atmospheres. Part 0. Equipment. General requirements

GOST 31856-2012: Gas-fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners. General technical requirements and test methods

GOST 32028-2012: Automatic shut-off valves for gas burners and gas appliances. General technical requirements and test methods

GOST 32029-2012: Mechanical thermostats (thermoregulators) for gas appliances. General technical requirements and test methods

GOST 32032-2013: Taps for gas burning appliances. General technical requirements and test methods

GOST 32484.1-2013: High-strength structural bolting assemblies for preloading. General requirements

GOST 32601-2013: Centrifugal pumps for petroleum, petrochemical and natural gas industries. General technical requirements

GOST 32832.1-2014: Mandrels with a longitudinal key and guided cut for Shaft cutters. Part 1. The main dimensions

GOST 33423-2015: Pipeline valves. Swing and lift check valves. General specifications

GOST 33721-2016: Head sets of electric drives, external contactors for switches. Safety requirements and methods of checking

GOST 3385-69: Wing nuts. Desing

GOST 33998-2016: Domestic gas cooking appliances. General technical requirements, test methods and rational use of energy

GOST 34011-2016: Gas distribution systems. Block gas delivery stations. Cabinet gas delivery stations. General technical requirements

GOST 4088-69: Fashioned nuts. Design

GOST 4751-73: Screw rings. Specifications

GOST 5761-2005: Valves for nominal pressure at most PN 250. General specifications

GOST 6393-73: Round nuts with set pin holes in side, product grade A. Design and dimensions

GOST 7275-75: Adjustable wrenches

GOST 799-73: Fishplate bolts for broad gauge. General requirements

GOST 8724-2002: Basic norms of interchangeability. Metric screw threads. General plan

GOST 8878-93: Hexagonal socket cone-point set screws. Product grades A and B. Specifications

GOST 9.303-84: Unified system of corrosion and ageing protection. Metallic and non-metallic inorganic coatings. General requirements for selection

GOST 9321-73: Rollers. Specifications

GOST 9399-81: Threaded steel flanges for Pn 20-100 MPa (200-1000 kgf/sq sm). Specifications.

GOST 9520-73: Vertical fine boring machines. Basic dimensions

GOST 9690-71: Lanyard stoppers

GOST IEC 60079-1-2011: Explosive atmospheres. Part 1. Equipment protection by flameproof enclosures 'd'

GOST IEC 60079-1-2013: Explosive atmospheres. Part 1. Equipment protection by flameproof enclosures «d»

GOST ISO 10684-2015: Fasteners. Hot dip galvanized coatings

GOST ISO 14579-2015: Bolts with cylindrical head and star-type internal socket button

GOST ISO 21670-2015: Fasteners. Nuts hexahedral welded with flange

GOST ISO 4032-2014: Hex Nuts, normal (type 1). Precision classes A and B

GOST ISO 4034-2014: Hex Nuts, normal (type 1). Precision class C

GOST ISO 4035-2014: Nuts hexahedral, low, chamfered (type 0). Precision classes A and B

GOST ISO 4036-2014: Nuts, hexagonal, low without bevel (type 0). Accuracy class B

GOST ISO 4042-2015: Fasteners. Electroplated coatings

GOST ISO 4759-1-2015: Tolerances for fasteners. Part 1. Иolts, screws, studs and nuts. Product grades A, B and C

GOST ISO 5414-1-2014: Holders with clamp screw for flatted parallel shank end mills. Connecting dimensions of the driving system of tool shanks

GOST ISO 7380-1-2014: Round head screw. Part 1. Round head screw with hexagon socket

GOST ISO 7380-2-2014: Round head screw. Part 2. Round head screw with hexagon socket and rim

GOST ISO 8674-2014: Nuts hexahedral high (type 2) with a fine-pitch thread. Precision classes A and B

GOST ISO 8675-2014: Nuts hexahedral low chamfered (type 0) with fine pitch thread. Precision classes A and B

GOST ISO 898-1-2014: Mechanical properties of fasteners made of carbon and alloyed steels. Part 1. Bolts, screws and studs with specified property classes with large and small thread pitch

GOST ISO 898-5-2014: Mechanical properties of fasteners made of carbon and alloyed steels. Part 5. Setting screws and similar threaded fasteners of established classes of hardness with large and small thread pitch

GOST ISO 8992-2015: Fasteners. General requirements for bolts, screws, studs and nuts

GOST ISO 965-5-2015: Basic norms of interchangeability. ISO general purpose metric screw threads. Tolerances. Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing

GOST ISO 9873-2011: Dental hand instruments. Reusable mirrors and handles

GOST R 50271-92: Prevailing torque type steel hexagon nuts. Mechanical and performance properties

GOST R 50272-92: Prevailing torque type all-metal hexagon nuts. Property classes 5, 8, 10 and 12. Specifications

GOST R 50273-92: Prevailing torque type hexagon nuts (with non-metallic insert). Property classes 5, 8 and 10. Specifications

GOST R 50274-92: Hexagon flange reduced head bolts. Specifications

GOST R 50399-92: Air-foam nozzles. Specifications

GOST R 50400-2011: Fire-fighting equipment. Hose branching. General technical requirements. Test methods

GOST R 50401-92: Suction gauzes. Specifications

GOST R 50403-92: Countersunk head screws. Product grades A and B. Specifications

GOST R 50404-92: Slotted pan head screws. Product grades A and B. Specifications

GOST R 50405-92: Slotted cheese head screws. Product grades A and B. Specifications

GOST R 50406-92: Raised countersunk head screws. Product grade A and B. Specifications

GOST R 50592-93: Hexagon nuts with flange. Product grade A. Specifications

GOST R 50790-95: Hexagon head bolts with metric fine pitch thread, product grades A and B. Specifications

GOST R 50791-95: Hexagon head bolts with reduced shank, product grade B (shank diameter approximately equal to pitch diameter). Specifications

GOST R 50792-95: Hexagon head bolts with thread to head, product grade C. Specifications

GOST R 50793-95: Hexagon head bolts with thread to head, product grades A and B. Specifications

GOST R 50794-95: Hexagon head bolts, product grade C. Specifications

GOST R 50795-95: Hexagon head bolts with metric fine pitch thread and thread to head, product grades A and B. Specifications

GOST R 50796-95: Hexagon head bolts, product grades A and B. Specifications

GOST R 51330.0-99: Explosionproof electrical apparatus. Part 0. General requirements

GOST R 51330.1-99: Electrical apparatus for explosive gas atmospheres. Part 1. Construction and verification test of flameproof enclosures of electrical apparatus

GOST R 51382-2011: Heating boilers. Part 4. Heating boilers with forced draught burners. Special requirements for boilers with forced draught oil burners with output up to 70 kW and maximum operating pressure of 0,3 MPa. Terminology, special requirements, test methods and marking

GOST R 51842-2001: Automatic shut-off valves for gas burners and gas appliances. General technical requirements and test methods

GOST R 51843-2013: Flame supervision devices for gas burning appliances. Thermo-electric flame supervision devices

GOST R 51847-2009: Gas-fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners. General technical requirements and test methods

GOST R 52057-2003: Taps for gas burning appliances. General technical requirements and test methods

GOST R 52283-2004: Fire-fighting centrifugal pumps. General technical requirements. Test methods

GOST R 52350.0-2005: Electrical apparatus for explosive gas atmospheres. Part 0. General requirements

GOST R 52350.1-2005: Electrical apparatus for explosive gas atmospheres. Part 1. Flameproof enclosures 'd'

GOST R 52627-2006: Bolts, screws and studs. Mechanical properties and test methods

GOST R 52628-2006: Nuts. Mechanical properties and test methods

GOST R 52644-2006: Hexagon bolts for high-strength structural bolting with large width across flats. Specifications.

GOST R 52645-2006: Hexagon nuts for high-strength structural bolting with large width across flats. Specifications.

GOST R 52854-2007: Bolts with star-type head and small flange. Specifications

GOST R 52855-2007: Bolts with star-type head and large flange. Specifications

GOST R 53249-2009: Fire-fighting equipment. Sleeved water collecting. General technical requirements. Methods of testing

GOST R 53250-2009: Fire-fighting equipment. Fire standpipe. General technical requirements. Methods of testing

GOST R 53251-2009: Fire-fighting equipment. Hand foam-nozzles. General technical requirements. Methods of testing

GOST R 53252-2009: Fire-fighting equipment. Foam mixers. General technical requirements. Methods of testing

GOST R 53253-2009: Fire-fighting equipment. Suction gauzes. General technical requirements. Methods of testing

GOST R 53331-2009: Fire-fighting equipment. Hand nozzles. General technical requirements. Methods of testing

GOST R 53557-2009: Motor vehicles. Connecting rod bolts. General technical requirements and methods of tests

GOST R 53664-2009: High-strength cheese-head and conical bolts for bridge building. Nuts and washers for them. Specifications

GOST R 53671-2009: Pipeline valves. Swing and lift check valves. General specifications

GOST R 53673-2009: Pipeline valves. Butterfly wicket valves. General specifications

GOST R 53812-2010: Automobile engines. Valve tappets. Technical requirements and test methods

GOST R 53819-2010: Vehicles. Fastenings wheels. Technical requirements and test methods

GOST R 53961-2010: Fire-fighting equipment. Underground fire hydrants. General technical requirements. Test methods

GOST R 54439-2011: Gas fired central heating boilers. Type B boilers of nominal heat input not exceeding 300 kW, but not exceeding 1000 kW

GOST R 54440-2011: Heating boilers. Part 1. Heating boilers with forced draught burners. Terminology, general requirements, test and marking

GOST R 54446-2011: Non domestic gas-fired overhead luminous radiant heaters. Part 1. Safety requirements

GOST R 54448-2011: Single burner gas-fired overhead radiant tube heaters for non-domestic use. Part 1. Safety requirements

GOST R 54482-2011: Piping connections for general-use hydraulic fluid power. Hose fittings with metric stud ends and O-ring. Technical requirements

GOST R 54786-2011: Fastening parts for detachable connections of nuclear power plants. Specifications.

GOST R 54823-2011: Pressure regulators and associated safety devices for gas appliances. Pressure regulators for inlet pressures above 50 kPa up to and including 500 kPa

GOST R 54824-2011: Pressure regulators and associated safety devices for gas appliances. Pressure regulators for inlet pressures up to and including 50 kPa

GOST R 54960-2012: Gas distribution systems. Block gas delivery stations. Cabinet gas delivery stations. General technical requirements

GOST R 55206-2012: Gas/air controls for gas burners and gas burning appliances. Part 1. Pneumatic types

GOST R 55209-2012: Safety and control devices for gas burners and gas burning appliances. General requirements

GOST R 55429-2013: Hoop-in detachable joints of pipelines. Design, dimensions and general specifications

GOST R 55430-2013: Detachable pipe joints. Evaluation of technical condition and methods of testing. Operation safety

GOST R 55599-2013: High pressure pipeline assembly units and components above 10 up to 100 MPa. General technical requirements

GOST R 55742-2013: Screws with cylindrical head and large star-type internal socket

GOST R 57977-2017: Interchangeable heads. Types and basic dimensions

GOST R 58249-2018: Machines for planting, harvesting, post-harvest processing of potatoes. Technical requirements

GOST R 9.316-2006: Unified system of corrosion and ageing protection. Thermodiffusion of zinc coatings. General requirements and control methods

GOST R ISO 10513-2009: Prevailing torque type all-metal hexagon nuts, style 2, with fine pitch thread. Property classes 8, 10 and 12

GOST R ISO 10642-2012: Hexagon socket countersunk head screws

GOST R ISO 10683-2013: Fasteners. Non-electrolytically zinc flake coatings

GOST R ISO 1207-2013: Slotted cheese head screws. Product grade A

GOST R ISO 12126-2009: Prevailing torque type all-metal hexagon nuts with flange. Accuracy classes A and B

GOST R ISO 12474-2012: Hexagon socket head cap screws with metric fine pitch thread

GOST R ISO 14579-2009: Bolts with cylindrical head and star-type internal socket button

GOST R ISO 14580-2012: Hexalobular socket cheese head screws

GOST R ISO 14583-2009: Star type socket pan cylindrical head screws

GOST R ISO 14584-2012: Star type socket raised countersunk head screws

GOST R ISO 15142-1-2017: Implants for surgery. Metal intramedullary nailing systems. Part 1. Intramedullary nails

GOST R ISO 3506-3-2009: Mechanical properties of corrosion-resistant stainless steel fasteners. Part 3. Set screws and similar fasteners not under tensile stress

GOST R ISO 4014-2013: Hexagon head bolts. Product grades A and B

GOST R ISO 4016-2013: Hexagon head bolts. Product grade C

GOST R ISO 4017-2013: Hexagon head screws. Product grades A and B

GOST R ISO 4018-2013: Hexagon head screws. Product grade C

GOST R ISO 4026-2013: Hexagon socket set screws with flat point

GOST R ISO 4027-2013: Hexagon socket set screws with cone point

GOST R ISO 4028-2013: Hexagon socket set screws with dog point

GOST R ISO 4029-2013: Hexagon socket set screws with cup point

GOST R ISO 4042-2009: Fasteners. Electroplated coatings

GOST R ISO 4759-1-2009: Tolerances for fasteners. Part 1: bolts, screws, studs and nuts. Product grades A, B and C

GOST R ISO 4762-2012: Hexagon socket head screws

GOST R ISO 4766-2013: Slotted set screws with flat point

GOST R ISO 7044-2009: Prevailing torque type all-metal hexagon nuts with flange. Accuracy classes A and B

GOST R ISO 8676-2013: Hexagon head screws with metric fine pitch thread. Product grades A and B

GOST R ISO 8765-2013: Hexagon head bolts with metric fine pitch thread. Product grades A and B

GOST R ISO 898-1-2011: Mechanical properties of fasteners made of carbon steel and alloy steel. Part 1. Bolts, screws and studs of specified property classes with coarse thread and fine pitch thread

GOST R ISO 898-5-2009: Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners not under tensile stresses

GOST R ISO 8992-2011: Fasteners. General requirements for bolts, screws, studs and nuts

GOST R ISO 9873-2006: Dental hand instruments. Reusable mirrors and handles

OST 108.530.01-82: Lobes for CHP plant pipelines. Design and dimensions.

OST 108.530.02-82: Threaded bushing. Construction and dimensions.

OST 108.530.03-82: Lobes for CHP plant pipelines. Design and dimensions.

OST 108.724.01-82: Plugs for CHP plant pipelines. Design and dimensions.

OST 108.724.02-82: Control thimble. Design and dimensions.

OST 108.764.01-80: Cylindrical helical springs for CHP plant and NTP plant pipeline hangers. Construction, dimensions and specifications.

OST 24.125.22-89: Lobes for pipelines of nuclear thermal power plant. Design and dimensions.

OST 24.125.23-89: Plugs for nuclear thermal power plant pipelines. Design and dimensions.

OST 26.260.18-2004: Process modules for oil and gas industry. General technical specifications

OST 26.260.462-99: Devices for installation of instruments measuring the temperature for PN from 0.6 to 16 MPa. Types, design, dimensions and general technical requirements

OST 26.260.472-2000: devices for installation of pressure gauges and pressure selection. General technical requirements.

OST 26-18-5-88: Technological units of gas and oil industry. General technical requirements.

OST 26-2037-96: Bolts with hexagonal head for flange joints. Design and dimensions.

OST 26-2038-96: Hex nuts for flange connections. Construction and dimensions.

OST 26-2039-96: Studs with screw-end for flanged connections (single precision). Design and dimensions.

OST 26-2040-96: Studs for flanged joints. Design and dimensions

OST 26-2041-77: Nuts for flange connections. Construction and dimensions.

OST 26-2041-96: Nuts for flange connections. Construction and dimensions.

OST 34-10-757-97: Parts and assembly units of pipelines of TPPs at Rrab <2.2 MPa (22 kgf

RD 34.35.606: General Guide to Overhaul of Thermal Automation and Measuring Equipment

RD 34.39.601: Guide to Repair of Fittings for Piping Systems at Pressure of 64-100 kgf/sq. cm

RD 34.41.601: Guide to Overhaul of Mud Pumps

SP 53-101-98: Manufacturing and quality control of steel structures for construction

ST TsKBA 006-2003: Pipe fittings. Cryogenic fittings. General technical conditions

ST TsKBA 037-2006: Pipe fittings. Packing glands. Construction, main dimensions and technical requirements

ST TsKBA 099-2011: Pipe fittings. Repairs. Organization of repair and general repair manual

ST TsKBA 104-2011: Pipe fittings. Adhesives and sealants. Stamps Basic parameters and conditions of use

TU 3742-001-96231033-2006: Swing check valve type 19s38nzh and 19s73nzh. Technical conditions

TU 4218-003-17416124-99: Connection box for electrical wiring. Technical conditions

GOST 10602-94: Hexagon head bolts with thread diameter over 48 mm. Product grade B. Specifications

GOST 2016-86: Thread gauges. Specifications

GOST 34484-2018: Stationary steam turbines. Strength calculation standards for cylinder bodies and valves

GOST R IEC 60079-0-2007: Explosive atmospheres. Part 0. Equipment. General requirements

GOST R IEC 60079-0-2011: Explosive atmospheres. Part 0. Equipment. General requirements

GOST R IEC 60079-1-2008: Explosive atmospheres. Part 1. Equipment protection by flameproof enclosures 'd'

Customers Who Viewed This Item Also Viewed:

Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
Language: English
Price: $262.35
Locomotive and motor rolling stock. Requirements of fire safety
Language: English
Price: $305.50
Unified system of design documentation. Operational documents
Language: English
Price: $610.13
Unified system of design documentation. Rules for the implementation of operational documents
Language: English
Price: $752.72
System of building design document. Pipelines. Symbols for presentation
Language: English
Price: $10.89
Electrical equipment for a.c. voltages from 1 to 750 kV. Requirements for dielectric strength of insulation
Language: English
Price: $267.30
Electrical articles. General requirement for environment mechanical stability
Language: English
Price: $28.20
Machines for the pulp and paper industry
Language: English
Price: $207.58
Unified system for design documentation. Rules for making exploitative documents
Language: English
Price: $183.15
Electrical insulation system. Thermal evalution and classification
Language: English
Price: $54.45
Fire hazard of textiles. Decorative textiles. Flammability test method and classification
Language: English
Price: $49.50
Loads and impacts
Language: English
Price: $338.40
Direct-acting safety valves. General specifications
Language: English
Price: $346.50
Technical regulations of Customs Union. On the safety of agricultural and forestry tractors and trailers
Language: English
Price: $98.40
Seamless cold-deformed pipes from alloys based on titanium. Specifications
Language: English
Price: $147.44
Flame arrestors and spark arrestors. General technical requirements. Test methods
Language: English
Price: $128.70
Production conditions analysis for product attestation
Language: English
Price: $285.18
Vibration. Technological equipment of pulp and paper production. Protection methods and means
Language: English
Price: $299.73
Steel. Methods of test and estimation of macrostructure
Language: English
Price: $148.50
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English
Price: $148.50

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message live-chat-up-arrow live-chat-down-arrow

Leave your message in the form below, and we will write back by e-mail!