GOST 25347-82

ГОСТ 25347-82

Basic norms of interchangeability. Unified system of tolerances and fits. Tolerance zones and recommendable fits

Основные нормы взаимозаменяемости. Единая система допусков и посадок. Поля допусков и рекомендуемые посадки

Status: Restored in the Russian Federation for individual industries. By order of the Federal Agency for Technical Regulation and Metrology dated 01.03.2016 No. 101-st, it was restored on the territory of the Russian Federation only in relation to products delivered under the State Defense Order; IUS 6-2016

The standard applies to smooth elements of parts with nominal sizes up to 3150 mm and establishes tolerance fields for smooth parts in landings and for non-conjugate elements.

Стандарт распространяется на гладкие элементы деталей с номинальными размерами до 3150 мм и устанавливает поля допусков для гладких деталей в посадках и для несопрягаемых элементов.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 56

Approved: USSR State Committee for Standards, 7/21/1982

SKU: RUSS69821

Price: $353.08




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 17 Metrology and measurements. Physical phenomena »

Construction (Max) » Standards » Other state standards used in construction » 21 Mechanical systems and general purpose devices »

Standards for pipe fittings (TPA) » 8. Piping valves (TPA) design » 8.1 General design issues piping valves (TPA) » 8.1.2 Interchangeability and other design requirements »

ISO classifier » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.040 Linear and angular measurements » 17.040.10 Tolerances and landings »

National standards » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.040 Linear and angular measurements » 17.040.10 Tolerances and landings »

ISO classifier » 21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES » 21.020 Characterization and design of mechanisms, instruments and equipment »

National standards » 21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES » 21.020 Characterization and design of mechanisms, instruments and equipment »

National Standards for KGS (State Standards Classification) » Latest edition » G Machines, equipment and tools » G1 General parts and units of machines » G12 Tolerances and fits »


The Document is Replaced With:

GOST 25347-2013: Basic norms of interchangeability. Geometrical product specifications. System for tolerances on linear sizes. Series of tolerances, limit deviations for holes and shafts

The Document References:

GOST 25346-89: Basic norms of interchangeability. Unified system of tolerances and fits. General, series of tolerances and fundamental deviations

The Document is Referenced By:

GOST 10580-2006: Technological foundry equipment. General specifications

GOST 10778-83: Spatulos. Specifications

GOST 10807-78: Road signs. General specifications

GOST 11042-90: Construction steel hammers. Specifications

GOST 1142-90: Horse-driven load carriages. Specifications

GOST 11447-80: Locking studs for Py 10-100 MPa (100-1000 kgf/cm2). Technical requirements

GOST 11646-82: Wheel fixing details and attachments for tractors, self propelled tool carriers, agricultural machines, tractor trailers and semitrailers. Dimensions

GOST 12126-86: Small power electric machines. Mounting dimensions

GOST 13529-93: Self-acting individual valves of circular form for piston compressors. Types and fitting dimensions

GOST 13535-87: Basic norms of interchangeability. Buttress thread, strengthened 45°

GOST 13944-86: Retaining spring flat rings and grooves for them. Specifications

GOST 14333-79: Rubber working mills. General specifications

GOST 14782-86: Nondestructive testing. Welded joints. Ultrasonic methods

GOST 14864-78: Pneumatic plug gauges from 3 to 160 mm. Specifications

GOST 14901-93: Moulds for the manufacture of industrial rubber articles

GOST 14919-83: Household electric ranges, electric plates and electric frying ovens

GOST 16140-77: Collapsible racks. Specifications

GOST 16841-79: Fan holes of devices frames of radio electronic and electrotechnical products. Types, structure and dimensions

GOST 17314-81: Devices for fastening thermal insulation of steel vessels and equipment. Design and dimensions. Technical requirements

GOST 17366-80: Welded thick-walled steel barrels for chemical products

GOST 17734-88: Knee-type millers. Standards of accuracy and rigidity

GOST 18396-88: Holders for luminescent lamps and starters

GOST 18898-89: Powder products. Methods for determination of density, oil content and porosity

GOST 18975-86: Knife for finishing works. Specification

GOST 19029-73: Closing up of ropes to thimble. Construction and dimensions

GOST 19030-73: Thimbles. Design and dimensions

GOST 19126-2007: Medical metallic instruments. General specifications

GOST 19259-73: Cutter for ceramic tiles

GOST 2.307-2011: Unified system for design documentation. Drawing of dimensions and limit deviations

GOST 2.307-68: Unified system for design documentation. Drawing of dimensions and limit deviations

GOST 20680-86: Vertical apparatuses with mechanical mixers

GOST 20889-88: Pulleys for driving V-belts with normal sections. General specifications

GOST 21029-75: Aluminum barrels for chemical products

GOST 21167-75: Machine bar centering vices with screw and lever. Design and main dimensions

GOST 21240-89: Medical scalpels and knives

GOST 21242-75: Flat or pin contact terminals of electrical equipment. Main dimensions

GOST 21401-75: Plain limit gauges for dimensions up to 500 mm. Required dimensions

GOST 22390-77: Automobile body-boxes. Fixture parts and circuits for cluster spacing of entrenching tools. Technical requirements

GOST 22782.6-81: Explosion proof electrical apparatus. Flameproof enclosure. Technical requirements and Test methods.

GOST 22853-86: Mobile buildings. General specifications

GOST 228-79: Anchor chains

GOST 23190-78: Bookselling furniture. General requirements

GOST 23301-78: Universal readjustable dies for element-by-element stamping. Technical requirements

GOST 23405-78: Pneumatic and hydraulic check valves. Types, main parameters and technical requirements

GOST 23410-78: Shield box viewing windows. Types, construction and dimensions

GOST 23508-79: Bookselling furniture for storage compartments. General specifications

GOST 24379.1-2012: Foundation bolts. Structure and dimensions

GOST 24379.1-80: Foundation bolts. Structure and dimensions

GOST 24741-2016: Joint for connection of crane rails to steel crane girders. Specifications

GOST 24741-81: Joint for connection of crane rails to steel crane girders. Specifications

GOST 24848.1-81: Variator V-belts for industrial equipment. Basic sizes and methods of control

GOST 24848.2-81: Variable-speed drive v-belts for industrial equipment

GOST 24853-81: Plain gauges for dimensions to 500 mm. Tolerances

GOST 25.502-79: Methods of mechanical testing of metals

GOST 25143-82: Thin wall and bimetal shells of plain bearings. Main dimensions

GOST 25281-82: Powder metallurgy. Method of determination of forming density

GOST 25307-82: Basic norms of interchangeability. Cone joining system of limits and fits

GOST 25349-88: Basic norms of interchangeability. Unified system of tolerances and fits. Tolerance zones for the plastics parts

GOST 25670-83: Basic norms of interchangeability. Limit deviations of dimensions without tolerance indication

GOST 25782-90: Derbies, floats, semifloats. Specifications

GOST 25897-83: Handles for doors of aluminium alloys. Types and principal dimensions

GOST 26155-84: Barrels from corrosion-resistant steel

GOST 26256-84: Loading chutes for trash ducts of the floors of residential and public buildings. Specification

GOST 26270-84: Vent flanges. Types and basic dimensions

GOST 26301-84: Opening devices from aluminium alloys. Types and basic dimensions

GOST 26379-84: Wide V-belts for variable-speed drives of agricultural machines. Specifications

GOST 26422-85: Clamps and opening limiter for aluminum alloy windows. Types and basic dimensions

GOST 26446-85: Brazed and soldered joints

GOST 26529-85: Powder materials. Radial crushing test method

GOST 26804-86: Metal road safety barriers. Specifications

GOST 27320-87: Expansive bolts. Construction

GOST 2746.1-88: Plastic Edison screw holders of series e14 and e27

GOST 27584-88: Electric overhead travelling cranes and gantry cranes. General specifications

GOST 27672-88: Plain bearings

GOST 28295-89: Collectors of electrical rotating machines

GOST 28341-89: Plain bearings. Thin-walled flanged half bearings. Dimensions, tolerances and methods of checking

GOST 28342-89: Plain bearings. Thin-walled half-bearings. Dimensions, tolerances and methods of checking

GOST 283-75: Wire nails

GOST 28433-90: Retrievers

GOST 28456-90: Expansive dowels for building. General specifications

GOST 28457-90: Expansive dowels for building. Construction

GOST 28601.3-90: System of bearing structures of the 482,6 mm series. Subracks and associated plug-in units. Main dimensions

GOST 30003-93: Metals. Cylindrical bending test of sheets and strips less than 2,5 mm thick

GOST 30176-95: Portable gas-turbine compressor stations of general purpose. General technical requirements

GOST 30213-94: Dental rotary instruments. Test methods

GOST 31.0151.01-90: Universal and special-purpose setters

GOST 31.111.41-93: Parts and assembly units of universal assembly devices for metal-cutting machines. Basic parameters. Constructive elements. Norms of accuracy

GOST 31.2031.02-91: Readjusted collapsible devices for part assembly under welding

GOST 31.211.42-93: Elements and assembly units of detachable fixtures for assembly and welding

GOST 31173-2003: Steel doors. Specifications

GOST 31610.0-2012: Electrical apparatus for explosive gas atmospheres. Part 0. General requirements

GOST 31842-2012: Petroleum and natural gas industries. Shell-and-tube heat eхchangers. Technical requirements

GOST 3325-85: Rolling bearings. Tolerance margins and technical requirements for shaft and housing seatings. Fits

GOST 33535-2015: Connections and crossings of railway tracks. Specifications

GOST 3840-79: Projection lenses. Specifications

GOST 4025-95: Domestic meat mincers. Specifications

GOST 5006-83: Toothed clutches. Specifications

GOST 5044-79: Thin-walled steel drums for chemical products

GOST 5089-80: Locks and latches for doors. Types and basic dimensions

GOST 5090-79: Locking Devices for windows and doors. Types and basic dimensions

GOST 5151-79: Wooden drums for electrical cables and wires. Specifications

GOST 520-89: Rolling bearings. General specifications

GOST 538-2001: Locks and building hardware. General specifications

GOST 538-2014: Locks and building hardware. General specifications

GOST 538-88: Lock and building hardware

GOST 5813-2015: Fan v-belts and pulleys for engines of cars, tractors and combines. Requirements and test methods

GOST 5813-93: Fan v-belts and pulleys for engines of cars, tractors and combines

GOST 6247-79: Steel welded barrels with rolling hoops on the shell

GOST 6758-76: External control for vehicles. Basic and mounting dimensions

GOST 7063-72: T-slot cutters. Specifications

GOST 7512-82: Nondestructive testing. Welded joints. Radiography method

GOST 765-85: Anchor shackles. Specifications

GOST 766-74: Anchors. General specifications

GOST 7945-86: Scoops for finishing works. Specifications

GOST 8220-85: Underground fire hydrants. Specifications

GOST 8291-83: Back pressure piston gages

GOST 8497-78: Matrosov's anchor. Specifications

GOST 8536-79: Blanks for marine shafts and rudder stocks. Specifications

GOST 9.303-84: Unified system of corrosion and ageing protection. Metallic and non-metallic inorganic coatings. General requirements for selection

GOST 9.910-88: Unified system of corrosion and ageing protection. Metals, alloys, heat-resistant coatings. Method of thermal fatigue testing of wedge shaded specimens in gas flows

GOST 9324-2015: Worm-type complete fine milling cutters for cylindrical gears with involute profile. Specification

GOST 9416-83: Building levels. Technical requirements

GOST ISO 12307-2-99: Plain bearings. Wrapped bushes. Checking the inside diameter

GOST ISO 15917-2015: End milling cutters with a spherical end made of hard alloy and ceramic materials with a cylindrical shank. Dimensions

GOST R 50044-92: Integrated microcircuits and semiconductor device service mounted technology. Requirements to packages

GOST R 50300-92: Turning tools with indexable inserts of superhard materials. Specifications

GOST R 50302-92: Regrindale superhard material (composite) tipped cartridges for toolholders. Specifications

GOST R 50641-94: Grooved pulleys for classical and narrow V-belts. System based on datum width

GOST R 50892-96: Elastic couplings with a toroid-shape shell. Specifications

GOST R 50895-96: Toothed clutches. Specifications

GOST R 51177-98: Overhead line hardware. General specifications

GOST R 51289-99: Returnable polymeric boxes. General specifications

GOST R 51330.0-99: Explosionproof electrical apparatus. Part 0. General requirements

GOST R 51582-2000: Traffic control devices. Traffic signs 'International road transport control' and 'Road transport inspection'. General technical requirements. Application of traffic signs

GOST R 51958-2002: Polymeric means of closing. General specifications

GOST R 52350.0-2005: Electrical apparatus for explosive gas atmospheres. Part 0. General requirements

GOST R 52545.1-2006: Rolling bearings. Measuring methods for vibration. Part 1. Fundamentals

GOST R 52545.2-2012: Rolling bearings. Measuring methods for vibration. Part 2. Radial and angular ball bearings

GOST R 52545.3-2011: Rolling bearings. Measuring methods for vibration. Part 3. Radial spherical and tapered roller bearings

GOST R 52545.4-2013: Rolling bearings. Measuring methods for vibration. Part 4. Radial cylindrical roller bearings

GOST R 52630-2006: Steel welded vessels and apparatus. General specifications

GOST R 52630-2012: Steel welded vessels and apparatus. General specifications.

GOST R 52768-2007: Centrifuges for industries working with radioactive media. General technical requirements and test methods

GOST R 52889-2007: Non-destructive testing. Ultrasound measurement of screw tightening forces. General requirements

GOST R 53192-2008: Welded steel structures of freight cars. Technical requirements

GOST R 53278-2009: Fire equipment. Fire valves. General technical requirements. Test methods

GOST R 53374-2009: Liquid - propellant rocket engines. General technical requirements for production and quality inspection during supply for use

GOST R 53429-2009: Printed circuit boards. Basic parameters of structure

GOST R 53628-2009: Metal roller bearing parts for bridge building. Specifications

GOST R 53677-2009: Petroleum and natural gas industries. Shell-and-tube heat eхchangers. Technical requirements

GOST R 53844-2010: Vehicles. Fine filters of oil for automobile, tractor and combine engines. Technical requirements and test methods

GOST R 53961-2010: Fire-fighting equipment. Underground fire hydrants. General technical requirements. Test methods

GOST R 54803-2011: High-pressure welded steel vessels. General technical requirements

GOST R 54917-2012: Long-links roller chains and associated chain sprockets for transmission and conveyors

GOST R 55525-2013: Storage systems. Adjustable pallet racking. General specification

GOST R 55599-2013: High pressure pipeline assembly units and components above 10 up to 100 MPa. General technical requirements

GOST R 56615-2015: Resources saving. Indices of materials consumption and materials affection. Guidance by establishment criterions of choice

GOST R ISO 22037-2013: Solid end mills with corner radii and cylindrical shanks made of hard cutting materials. Dimensions

GOST R ISO 4759-1-2009: Tolerances for fasteners. Part 1: bolts, screws, studs and nuts. Product grades A, B and C

GOST R ISO/TS 10303-1050-2009: Industrial automation systems and integration. Product data representation and exchange. Part 1050. Application module. Dimension tolerance

MI 955-85: GSE. Digital raster system for linear measurements. Models 19000, 19001. Method of verification

NPB 154-2000: Fire machinery. Fire hydrants valves. Specifications for fire safety. Test methods.

NPB 154-96: Fire valves. Basic Indexis. Test Methods

ODM 218.6.004-2011: Guidelines for road safety ensuring rope guardrails

OST 108.030.133-84: Pipe elements of steam boiler heat surfaces under pressure less than 4 MPA, water boilers and heat-recovery boilers. Technical requirements, acceptance and control methods.

OST 24.201.03-90: Steel high-pressure vessels and devices. General technical requirements.

OST 26.260.18-2004: Process modules for oil and gas industry. General technical specifications

OST 26.260.758-2003: Metal structures. General technical requirements.

OST 26-01-139-81: Studs threaded vessels and apparatus connections for pressure over 9.81 up to 98.1 MPa (over 100 up to 1000 kgf/cm2). Types. Design and dimensions.

OST 26-01-140-81: Nuts for threaded joints of vessels and apparatuses for pressure over 9.81 to 98.1 MPa (over 100 to 1000 kg/cm2). Types. Construction and dimensions.

OST 26-01-141-81: Washers for threaded joints of vessels and apparatuses for pressure over 9.81 up to 98.1 MPa (over 100 up to 1000 kgf/cm2). Design and dimensions.

OST 26-01-142-81: Sockets for threaded joints of vessels and apparatuses for pressure over 9.81 to 98.1 MP (100 to 1000 kg/cm2). Construction and dimensions.

OST 26-01-147-89: Drying devices with rotating drums. General technical requirements.Printing telegraph and terminals for document electric communication. Methods of printed character parameter measurement.

OST 26-01-64-83: Clamps. Design and dimensions.

OST 26-291-94: Steel welded vessels and devices. General technical requirements.

OST 34-13-016-88: Self-tapping bolts. Design and dimensions. Technical requirements

OST 34-13-900-85: Unified system of tolerances and seating fits for tolerances and recommended seating fits (limitation under GOST 25347-82).

OST 48-41-91: Engineering products of non-ferrous metallurgy. General Specifications.

PB 03-384-00: Rules for design, manufacture and acceptance of steel welded vessels and apparatus

PNAE G-7-030-91: Uniform control methods for basic materials (semi-finished materials), welded joints and welding on of equipment and pipelines of nuclear power plants. Ultrasonic testing. Part II. Weld examination

R 50-54-101-88: Recommendations. Methods for calculating the main indicators of industrial robots

RD 153-34.0-04.185-2003: Machines and equipment for construction, technical re-equipment and repair of energy facilities. Requirements for design, materials, manufacturing, acceptance and testing

RD 22-207-88: Lifting machines. General requirements and production standards

RD 26.260.010-2002: The leading document on standardization. The list of standard documentation on standardization on the cells and devices working under pressure.

RD 26.260.010-97: List of Regulatory Documents on Standardization for Pressure Vessels and Apparatus

RD 26-01-158-86: The leading document. Gas drying units with the rotating drums. Norms and methods of calculation on durability.

RD 26-07-274-89: Pipe fittings. Rings brass for gray iron gate valves on Ru to 1.0 MPa (10 kgf

RD 34 02.028-2007: Technical rules. Mechanical equipment and special steel structures for hydraulic structures. Manufacturing, installation and acceptance.

RD 36-62-00: Hoisting equipment. General technical requirements.

RD 50-632-87: Guidelines. Unification of products. Construction of parametric and standard series of parts and assembly units of general engineering application

RM 38.14.008-94: Guiding Material. Radial (centrifugal) and axial fans. Maintenance and repair.

RTM 36.44.15.3-87: Recommended Practice for Fabrication of Polyethylene and Polypropylene Pipe Fittings Used for Installation of Process Piping

SNiP 3.03.01-87: Bearing and enclosing structures

SNiP 3.06.04-91: Bridges and pipes

SP 46.13330.2012: Bridges and pipes

ST RK 1125-2002: Traffic signs. General specification. Put into effect in substitution of GOST 10807-78

ST RK 1278-2004: Road restrictions systems. Metal safety barriers. Specification

ST TsKBA 083-2010: Pipe fittings. Multi-layer bellows of alloy VT1-0. General technical conditions

STA 25.03.009-2004: Means of alarm, fire and alarm-fire systems. General technical requirements and test methods

STB EN 1870-8-2006: Safety of woodworking machines. Circular sawing machines. Part 8. Edging and deal-frame machines with motorized sawing unit and with manual loading and/ or unloading

TU 102-390-85: Vibrational low-frequency platforms with spatial oscillations of the HSV type

TU 102-533-89: A set of structures on a building without a crane with arched span of 12, 15 and 18 m

TU 26-01-355-80: Electrolyzers. Type of SPP with component equipment

TU 26-02-1162-95: Shell and tube heat exchangers for elevated temperatures and pressures with a floating head and a compensator on it. Technical conditions

TU 26-02-975-84: Tips to sleeves for loading and loading risers

TU 5210-001-25432924-2008: Fences, road, metal, barrier type

TU 5216-001-05765820-2007: Roadside restraints for automobiles, side, first, metal type

TU 5216-002-03910056-2008: Barrier metal fencing. Technical conditions

TU 5216-006-44884945-2006: Barrier retaining barriers for cars, side in unilateral and bilateral execution of the pavement and road groups

TU 5216-007-44884945-2006: Fencing road restraints for cars, the first type, groups 11Д and 11ДД

TU 5216-055-00110604-2007: Fences, road, holding for cars of barrier type, road and bridge groups, one-sided and two-sided

TU 5216-063-01393697-2006: Road and bridge fences for automobiles, side, first type, metal

TU 5262-010-56506912-2004: Roadside restraints for cars, side, first type, metal. Technical conditions

TU 5728-006-93978201-2008: Sealing gaskets made of thermally expanded graphite (PUTG). Technical conditions

GOST 2015-84: Fixed plain gauges. Technical requirements

GOST R IEC 60079-0-2007: Explosive atmospheres. Part 0. Equipment. General requirements

GOST R IEC 60079-0-2011: Explosive atmospheres. Part 0. Equipment. General requirements

RD 31.45.05-83*: Crane hoisting devices. General technical requirements

RD 31.55.01.01-90: Spare parts for marine diesel engines of foreign construction. Steel piston heads. Technical requirements

RD ROSEK-001-96: Hoisting machines. Metal structures. Ultrasonic control. Key Points

ST TsKBA 083-2016: Pipeline fittings. Multi-layered bellows made of alloy ВТ1-0. General technical specifications

TU 5216-002-18601734-2000: Metal road holding guard for cars, side, first type, single-sided

TU 5216-021-00110604-03: Road guardrail for cars, side, first type, metal, single-sided

Customers Who Viewed This Item Also Viewed:

Electromagnetic compatibility of technical equipment. Immunity of equipment for general lighting purposes to electromagnetic disturbance. Requirements and test methods
Language: English
Price: $218.25
Еlectromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <= 16 A per phase). Limits and test methods
Language: English
Price: $410.31
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
Language: English
Price: $714.89
Pipeline valves. General safety requirements
Language: English
Price: $213.84
Еlectromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A and not subject to conditional connection. Limits and test methods
Language: English
Price: $359.87
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Conformity assessment system for the use of nuclear energy. Personnel in the non-destructive and destructive testing of metal. Requirements and qualification procedure Дата введения в действие 15.03.2018
Language: English
Price: $207.90
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Language: English
Price: $121.77
Unified system of corrosion and ageing protection. Paint coatings. Groups of operation conditions
Language: English
Price: $158.40
Atom stations. Equipment, instruments, means of monitoring and control systems. General technical requirements
Language: English
Price: $1,146.54
System of design documents for construction. Basic requirements for design and working documentation
Language: English
Price: $867.18
Reinforcing rolled products for reinforced concrete constructions. Specifications
Language: English
Price: $298.98
Passenger cars on locomotive traction. Requirements for structural strength and dynamic qualities
Language: English
Price: $595.58
Non-destructive Testing. Welded Joints. Ultrasonic Methods
Language: English
Price: $140.58
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $293.04
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $212.85
Pipeline valves. Leakage rates of valves
Language: English
Price: $173.25
Compilation and execution of safety data sheet of chemical products
Language: English
Price: $175.23
Supports for Cylindrical and Conical Upright Apparatus. Types and Basic Parameters
Language: English
Price: $573.20

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!