Steel stamping forgings. Tolerances, allowances and forging laps
Поковки стальные штампованные. Допуски, припуски и кузнечные напуски
Status: Effective - Supersedes. IUS 12-1989 The limitation of effectiveness period has been lifted: Protocol No. 7-95 of the IGU dated 01.03.95 (IUS 11-1995)
The standard applies to steel stamped forgings with a mass of not more than 250 kg and (or) with a linear overall dimension of not more than 2500 mm, manufactured by hot bulk forging. The standard establishes the largest tolerances for dimensions, deviations of shape, allowances, forging allowances and the smallest radii of curvature of the outer corners.
Стандарт распространяется на стальные штампованные поковки массой не более 250 кг и (или) с линейным габаритным размером не более 2500 мм, изготовленные горячей объемной штамповкой. Стандарт устанавливает наибольшие величины допуска размеров, отклонений формы, припусков, кузнечных напусков и наименьшие радиусы закругления наружных углов.
Format: Electronic (pdf/doc)
Page Count: 40
Approved: USSR State Committee for Product Quality and Standards Management,
The Product is Contained in the Following Classifiers:
Construction (Max) »
Other state standards used in construction »
77 Metallurgy »
Standards for pipe fittings (TPA) »
10. Production »
10.2 Billets (forgings, stampings, rolling, castings, etc.) »
ISO classifier »
77 METALLURGY »
77.140 Iron and steel products »
77.140.85 Cast iron and steel forgings »
National standards »
77 METALLURGY »
77.140 Iron and steel products »
77.140.85 Cast iron and steel forgings »
National Standards for KGS (State Standards Classification) »
Latest edition »
V Metals and metal products »
V0 General rules and regulations on metallurgy »
V03 Metal forming. Forgings »
As a Replacement Of:
GOST 7505-74: Steel stamping forgings. Tolerances, allowances and forging laps
The Document References:
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 14959-79: Spring carbon and alloy steel bars. Specifications
GOST 2.308-79: Unified system for design documentation. Representation of limits of forms and surface lay-out on drawings
GOST 2590-88: Round steel bars. Dimensions
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 3.1126-88: Unified system for technological documentation. Rules for making graphic documents of forging pieces
GOST 4543-71: Structural alloyed steel
GOST 8479-70: Structural carbon and alloy steel forgings
The Document is Referenced By:
ATK 24.200.02-90: Album typical designs. Flanged steel plugs. Design, dimensions and specifications
ATK 26-18-5-93: Album typical designs. Steel turning plugs for rebar flanges. Design, dimensions and specifications
GOST 10674-82: Tank cars of 1520 mm gauge main-line railways. General specifications
GOST 10674-97: Tank Car of 1520 mm gauge mainline railways. General technical conditions
GOST 11042-90: Construction steel hammers. Specifications
GOST 11402-75: Blacksmith's hand and hammer tools. Chamfered nose sledge hammers. Design and dimensions
GOST 12393-77: Fittings for overhead system of electric railways. General specifications
GOST 12815-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). Types. Connecting dimensions and dimensions of sealing surfaces
GOST 12820-80: Steel plane welded flanges for Pnom from 0,1 to 2,5 MPa (from 1 to 25 kgf/cm2). Design and dimensions
GOST 12821-80: Steel butt-welded flanges for Pnom from 0,1 to 20,0 MPa (from 1 to 200 kgf/cm2). Design and dimensions
GOST 12822-80: Steel loose flanges with welded ring for Pnom from 0,1 to 2,5 MPa (from 1 to 25 kgf/sq sm). Design and dimensions
GOST 12893-2005: Single-seated, double-seated and cage control valves. General specifications
GOST 13547-2015: Pipeline valves. Butterfly wicket valves. General specifications
GOST 13547-79: Butterfly valves for pnom up to 2.5 MPa (25 kgf/cm2)
GOST 13877-80: Sucker rods and couplings
GOST 14901-93: Moulds for the manufacture of industrial rubber articles
GOST 15763-2005: Threaded and flange pipe connections for PN to 63 MPa (to 630 kgf/sq sm). General specifications
GOST 15763-91: Pipeline thread connections for Py up to 63 MPa (up to 630 kgf/cm2)
GOST 17438-72: Pliers
GOST 17439-72: Adjustable pliers
GOST 18578-89: Builders axes. Specifications
GOST 18981-73: Pipe toggle wrenches
GOST 19334-73: Connection parts for pipe-lines and metal-reinforced hoses. Types, basic dimensions and technical requirements
GOST 19535-74: Flange joints for hydraulic and lubricating systems. Specifications
GOST 21345-2005: Ball, lifting-plug and cylindrical cocks for nominal pressure at most PN 250. General specifications
GOST 2224-93: Steel eye rings for wire cables
GOST 22790-89: Assembly units and pipelines components, designed for рnom over 10 to 100 MPa (from 100 to 1000 kgf/cm2)
GOST 2300-81: Inserted pins with a tongue. Specifications
GOST 2310-77: Steel bench hammers
GOST 23476-79: Tramway and trolleybus overhead trolley wire supporting devices. General specifications
GOST 2349-75: System 'hook-eye' drawbar couplings for road- and tractor-trailer trains. Basic parameters and dimensions. Technical requirements
GOST 24258-88: Different types of scaffolding. General specifications
GOST 24259-80: Assembling equipment for temporary fastening and adjusting structural members of building. Classification and general technical requirements
GOST 25032-81: Different types of crampons. Classification and general technical requirements
GOST 25496-82: Anchors with high holding power. Specifications
GOST 25573-82: Freight handling rope slings for construction
GOST 25878-85: Steel moulds for reinforced concrete members. Pallets. Construction and dimensions
GOST 2838-80: Wrenches
GOST 2841-80: Single-ended open spanners. Constructions and dimensions
GOST 28648-90: Crane wheels
GOST 30176-95: Portable gas-turbine compressor stations of general purpose. General technical requirements
GOST 3032-76: Fly nuts. Construction and dimensions
GOST 3033-79: Eye bolts. Design and dimensions
GOST 30632-99: Brake block holder and key for 1520 mm main-line locomotives. General specifications
GOST 31.0151.01-90: Universal and special-purpose setters
GOST 31.0171.01-91: Devices for metal cutting machine tools. Parts and assembly units of general application. General technical requirements
GOST 31294-2005: Direct-acting safety valves. General specifications
GOST 31592-2012: Machine reducers. General specifications
GOST 32885-2014: Automatic coupler model SA-3 and its components. Design and dimensions
GOST 33259-2015: Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
GOST 33423-2015: Pipeline valves. Swing and lift check valves. General specifications
GOST 34075-2017: Brake block holder and key for railway rolling stock. General specifications
GOST 4751-73: Screw rings. Specifications
GOST 5006-83: Toothed clutches. Specifications
GOST 5257-98: Rough carbon steel tyres for tramway rolling stock. Specifications
GOST 5761-2005: Valves for nominal pressure at most PN 250. General specifications
GOST 5761-74: Valves for nominal pressure
GOST 5762-2002: Pipeline industrial valves. Gate valves PN<=250. General specifications
GOST 5762-74: Pipeline industrial valves. Gate valves PN £ 250. General specifications
GOST 5973-2009: Dump cars for 1520 mm railway gauge. General specifications
GOST 6627-74: Single hooks. Blanks. Types. Construction and dimensions
GOST 7211-86: Cold chisels
GOST 7212-74: Cape chisels
GOST 7275-75: Adjustable wrenches
GOST 766-74: Anchors. General specifications
GOST 8479-70: Structural carbon and alloy steel forgings
GOST 8536-79: Blanks for marine shafts and rudder stocks. Specifications
GOST 9057-69: Double-sided swing clamp straps. Construction
GOST 9060-69: Tiltable washers. Construction
GOST 9650-80: Pins. Specifications
GOST 9690-71: Lanyard stoppers
GOST R 50895-96: Toothed clutches. Specifications
GOST R 51047-97: Cutters for shearers and entry-driving machines. General specifications
GOST R 51177-2017: Overhead line hardware. General technical requirements
GOST R 51177-98: Overhead line hardware. General specifications
GOST R 51220-98: Transmission tooth gears of the traction main railway stock. Raw pieces. Technical specifications
GOST R 51659-2000: Tank cars of 1520 mm gauge main line railways. General specifications
GOST R 53671-2009: Pipeline valves. Swing and lift check valves. General specifications
GOST R 53673-2009: Pipeline valves. Butterfly wicket valves. General specifications
GOST R 53817-2010: Vehicles. Telescopic single acting hydraulic cylinders. Technical requirements and test methods
GOST R 54432-2011: Flanges for valves, fittings, and pipelines for pressure from PN 1 to PN 200. Design, dimensions and general technical requirements
GOST R 54803-2011: High-pressure welded steel vessels. General technical requirements
GOST R 55511-2013: Pipeline valves. Electric actuators. General specifications
GOST R 55599-2013: High pressure pipeline assembly units and components above 10 up to 100 MPa. General technical requirements
GOST R 55819-2013: Brake block holder and key for railway rolling stock. General specifications
GOST R 58201-2018: Mining drilling for pneumatic and hydraulic anchorage installers. General specifications
MDS 12-41.2008: Assembly equipment for temporary fixing of prefabricated elements of erected and dismantled buildings
OST 108.021.04-78: Steam Stationary Turbines. Welded diaphragms. Guide vanes. General specifications.
OST 108.030.113-87: Carbon and alloy steel forgings for thermal and nuclear power stations equipment and pipelines. Technical specifications.
OST 108.030.129-79: Shaped parts and assembly units of Station and turbine pipelines of thermal power stations. General specifications.
OST 108.958.04-85: General-purpose forgings for turbines and compressors. Specification.
OST 24.090.51-86: Clamps for steel ropes. Technical conditions.
OST 24.125.15-89: Stamped straight Tees for pipelines of nuclear thermal power plant. Design and dimensions.
OST 24.125.16-89: Stamped reducing Tees for pipelines of nuclear thermal power plant. Design and dimensions.
OST 24.125.24-89: Flanges of welded butt joint with ledge for NPP pipelines.Design and dimensions.
OST 24.125.25-89: Flanges of welded butt joint with depression for NPP pipelines. Design and dimensions.
OST 24.125.26-89: Flanges connecting ledge welded butt joint for NPP pipelines. Design and dimensions.
OST 24.125.45-89: Stamped straight and union Tees for pipelines of nuclear thermal power plant. Design and dimensions.
OST 24.125.54-89: Flanges of welded butt joint with ledge for NPP pipelines.Design and dimensions.
OST 24.125.55-89: Flanges of welded butt joint with depression for NPP pipelines. Design and dimensions.
OST 24.125.56-89: Flanges of welded butt joint with ledge for NPP pipelines.Design and dimensions.
OST 24.201.03-90: Steel high-pressure vessels and devices. General technical requirements.
OST 26-04-1222-75: Products of cryogenic engineering. General technical requirements and standards.
OST 26-04-2000-77: Plugs. Design and dimensions. Specifications.
OST 26-07-596-72: Electric drives for pipeline fittings. Export including tropical climate countries. General requirements.
OST 34-42-836-86: Flat Flanges for pipes of TPP and NPP. Design and dimensions.
OST 37.002.0444-77: Assembly units and fastening parts of overhead conveyors to the supporting metal structures. Construction and dimensions
OST 48-41-91: Engineering products of non-ferrous metallurgy. General Specifications.
OST 95 227-92: Non-standardized products of general machine-building applications. General technical requirements.
PB 03-384-00: Rules for design, manufacture and acceptance of steel welded vessels and apparatus
RD 153-34.0-04.185-2003: Machines and equipment for construction, technical re-equipment and repair of energy facilities. Requirements for design, materials, manufacturing, acceptance and testing
RD 22-207-88: Lifting machines. General requirements and production standards
RD 36-62-00: Hoisting equipment. General technical requirements.
RD 50-534-85: Guidelines. System of standards for tooling. Adaptations to metal-cutting machine tools. Information retrieval system of choice. Information array of equipped technological operations. Rules of formation
SP 53-101-98: Manufacturing and quality control of steel structures for construction
ST TsKBA 006-2003: Pipe fittings. Cryogenic fittings. General technical conditions
ST TsKBA 087-2010: Pipe fittings. Electric drives. General technical conditions
ST TsKBA 090-2013: Pipe fittings. Pneumatic actuators and hydraulic actuators. General technical conditions
STB GOST R 51659-2001: Railroad tankers of mainline railways of 1520 mm gauge. General specifications
GOST 10935-2019: Cargo freight cars. General specifications
GOST 34610-2019: Pipe fittings. Electric drives. General specifications
GOST 34625-2019: Gear lever brake traction rolling stock. General specifications
GOST 6490-2017: Line suspension disk insulators. General specifications
GOST R 58518-2019: Steel construction hammers. Technical conditions
GOST R 58753-2019: Cargo rope slings for construction. Technical specifications
PNST 364-2019: Automatic coupling device with automatic coupling sa-3t of freight cars of railways of 1520 mm gauge. Technical conditions
Customers Who Viewed This Item Also Viewed:
Electromagnetic compatibility of technical equipment. Immunity of equipment for general lighting purposes to electromagnetic disturbance. Requirements and test methods
Еlectromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <= 16 A per phase). Limits and test methods
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Security of Financial (banking) Operations. Information Protection of Financial Organizations. Basic Set of Organizational and Technical Measures
Еlectromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A and not subject to conditional connection. Limits and test methods
Non-destructive Testing. Welded Joints. Ultrasonic Methods
Construction in seismic regions of Ukraine
Aviation turbine fuels and kerosine. Determination of smoke point
Distillate fuels. Determination of free water and particulate contamination by visual inspection method
Aviation gas turbine fuels. Method for determining thermal oxidative stability
Hazard classification of chemical products. General requirements
Warning labeling of chemical products. General requirements
Safety data sheet for chemical products. General requirements
Hoisting cranes. Rules and test methods
Aviation turbine fuels. Determination of lubricity by the ball-on-cylinder lubricity evaluator (BOCLE)
Aviation turbine fuel. Determination of acidity
Petroleum products. Determination of color by Saybolt chromometer
Passenger cars on locomotive traction. Requirements for structural strength and dynamic qualities
Aviation fuels. Calculating net calorific value
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.