GOST R 55740-2013
ГОСТ Р 55740-2013
|
|
Steel bolts, screws and studs with adhesive coating. Technical requirements
Болты, винты и шпильки стальные с клеевым покрытием. Технические т��ебования
Status: Effective - Introduced for the first time. IUS 10-2014
This standard establishes the functional properties of microencapsulated coatings (hereinafter referred to as MK coatings) on steel bolts, screws and studs (hereinafter referred to as bolts): - with ISO metric thread according to GOST 8724; - with a nominal thread diameter of 3 to 39 mm (thread with a large pitch); - with a nominal thread diameter of 8 to 39 mm (thread with fine pitch); - with strength classes according to GOST R ISO 898-1, GOST R ISO 3506-1; - coated or uncoated; - with application in the temperature range from minus 50 ° С to 100 ° С and depending on the purpose up to 150 ° С. This standard establishes the test of the suitability of MK coatings on selected control bolts, as well as the system test of bolts with MK coatings at room and at elevated temperatures. For bolts having a surface with an integrated and / or additionally applied lubricant, the system test is valid only at room temperature. Instructions for system testing of bolts having a surface with an integrated and (or) additionally applied lubricant at high temperatures are contained in Appendix A
Настоящий стандарт устанавливает функциональные свойства микрокапсулированных покрытий (далее - МК-покрытий) на стальных болтах, винтах и шпильках (далее - болты): - с метрической резьбой ИСО по ГОСТ 8724; - с номинальным диаметром резьбы от 3 до 39 мм (резьба с крупным шагом); - с номинальным диаметром резьбы от 8 до 39 мм (резьба с мелким шагом); - с классами прочности по ГОСТ Р ИСО 898-1, ГОСТ Р ИСО 3506-1; - с покрытием или без покрытия; - с применением в температурном диапазоне от минус 50 °С до 100 °С и в зависимости от назначения до 150 °С. Настоящий стандарт устанавливает испытание пригодности МК-покрытий на выбранных контрольных болтах, а также системное испытание болтов с МК-покрытиями при комнатной и при повышенной температурах. Для болтов, имеющих поверхность с интегрированным и (или) дополнительно нанесенным смазочным веществом, системное испытание является действительным только при комнатной температуре. Указания для системного испытания болтов, имеющих поверхность с интегрированным и (или) дополнительно нанесенным смазочным веществом при высоких температурах, содержится в приложении А
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
11/8/2013
SKU: RUSS69837
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
21 Mechanical systems and general purpose devices »
Standards for pipe fittings (TPA) »
13. Standards for basic components and parts of injection molding machines »
13.2 Fasteners »
ISO classifier »
21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES »
21.060 Fasteners »
21.060.10 Bolts, screws, studs »
National standards »
21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES »
21.060 Fasteners »
21.060.10 Bolts, screws, studs »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G3 Fasteners for general engineering applications »
G31 Bolts »
The Document References:
GOST 11284-75: Through holes for fasteners. Dimensions
GOST 11371-78: Washers. Specifications
GOST 8724-2002: Basic norms of interchangeability. Metric screw threads. General plan
GOST R 53269-2009: Fire equipment. Helmets for fire-fighters. General technical requirements. Test methods
GOST R ISO 16047-2009: Fasteners. Torque/clamp force testing
GOST R ISO 3269-2009: Fasteners. Acceptance inspection
GOST R ISO 3506-1-2009: Mechanical properties of corrosion-resistant stainless steel fasteners. Part 1. Bolts, screws and studs
GOST R ISO 4017-2013: Hexagon head screws. Product grades A and B
GOST R ISO 4753-2013: Fasteners. Ends of parts with external ISO metric thread
GOST R ISO 898-1-2011: Mechanical properties of fasteners made of carbon steel and alloy steel. Part 1. Bolts, screws and studs of specified property classes with coarse thread and fine pitch thread
OK 005-93: All-Russia Classification of Products (Part 1)
OK 005-93: All-Russia Product Classification (OKP) (Part 13)
OK 005-93: All-Russia Classification of Products (OKP)
OK 005-93: All-Russia Classification of Products (Part 17)
OK 005-93: All-Russia Product Classification (OKP) (Part 3)
OK 005-93: All-Russia Classification of Products (OKP) (Part 4)
OK 005-93: All-Russia Classification of Products (Part 5)
OK 005-93: All-Russia Classification of Products (Part 6)
OK 005-93: All-Russia Product Classification (OKP) (Part 7)
OK 005-93: All-Russia Classification of Products (OKP) (Part 8)
OK 005-93: All-Russia Classification of Products (part 9)
OK 005-93: All-Russia Classification of Products (OKP) (Part 10)
OK 005-93: All-Russia Classification of Products (Part 11)
OK 005-93: All-Russia Classification of Products (part 12)
OK 005-93: All-Russia Classification of Products (OKP) (Part 14)
OK 005-93: All-Russia Classification of Products (part 15)
OK 005-93: All-Russia Classification of Products (Part 16)
OK 005-93: All-Russia Classification of Products (Part 17)
OK 005-93: All-Russia Classification of Products (Part 18)
OK 005-93: All-Russia Classification of Products (Part 19)
OK 005-93: All-Russia Classification of Products (Part 18)
OK 005-93: All-Russia Classification of Products (Part 21)
OK 005-93: All-Russia Classification of Products (OKP) (Part 22)
The Document is Referenced By:
GOST R 58154-2018: Materials for substructure of hinged ventilated facade systems. General technical requirements
|
Customers Who Viewed This Item Also Viewed:
 |
Preservative oil K-17
Language: English |
Jet fuels
Language: English |
Chill moulds. Ventilation channels. Dimensions
Language: English |
Additive АКОР-1. Specifications
Language: English |
Vibration. Evaluation of machine vibration by measurements on non-rotating parts. Part 3. Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15000 r/min
Language: English |
Ceramic brick and stone. General specifications
Language: English |
Microbiology of food and animal feeding stuffs. Methods for detection and enumeration of sulphite-reducing bacteria growing under anaerobic conditions
Language: English |
Maximum admissible amounts of chemical substances, emitting from the packaging materials into food products
Language: English |
System of design documents for construction. Rules for execution of the working documentation of architectural and construction solutions
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
