GOST 16093-81

ГОСТ 16093-81

Basic norms of interchangebility. Metric screw thread. Tolerances. Clearance fits

Основные нормы взаимозаменяемости. Резьба метрическая. Допуски. Посадки с зазором

Status: Not effective - Superseded. IUS 5-2005

The standard applies to metric threads with a profile according to GOST 9150-81, diameters from 1 to 600 mm according to GOST 8724-81 and GOST 16967-81, main dimensions according to GOST 24705-81 and GOST 24706-81 and establishes a system of tolerances fo

Стандарт распространяется на метрическую резьбу с профилем по ГОСТ 9150-81, диаметрами от1 до 600 мм по ГОСТ 8724-81 и ГОСТ 16967-81,основными размерами по ГОСТ 24705-81 и ГОСТ 24706-81 и устанавливает систему допусков дляпосадок с зазором.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 32

Approved: USSR State Committee for Standards, 6/18/1981

SKU: RUSS69888

Price: $384.00




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 21 Mechanical systems and general purpose devices »

ISO classifier » 21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES » 21.040 Screw threads » 21.040.10 Metric threads »

National standards » 21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES » 21.040 Screw Threads » 21.040.10 Metric threads »

National Standards for KGS (State Standards Classification) » Latest edition » G Machines, equipment and tools » G1 General parts and units of machines » G13 Threads »

National Standards for OKSTU » SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS » Detachable connections (threads, keys, splines, etc.) »

National Standards for OKSTU » SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS » Tolerances and landings. Surface cleanliness »


The Document is Replaced With:

GOST 16093-2004: Basic norms of interchangeability. Metric screw thread. Tolerances. Clearance fits

As a Replacement Of:

GOST 16093-70: Metric thread for diameters from 1 up to 600 mm. Tolerances

GOST 17722-72: Metric thread for instrument-making industry. Tolerances

The Document References:

GOST 16967-81: Basic norms of interchangeability. Metric thread for instrument-making industry. Diameters and pitches

GOST 24705-81: Basic norms of interchangeability. Metric screw thread. Basic dimensions

GOST 24706-81: Basic norms of interchangeability. Metric thread for instrument-making industry. Basic dimensions

GOST 8724-81: Basic norms of interchangeability. Metric screw thread. Diameters and pitches

GOST 9150-81: Basic norms of interchangeability. Metric screw thread. Profile

The Document is Referenced By:

ATK 24.203.04-90: Pipeline connections with flanging of copper tubes. Types, dimensions and technical requirements

ATK 26-18-10-94: Devices for Installation of Temperature Measuring Devices for Use at Nominal Pressure from 0.6 to 16.0 MPa. Plugs. General Technical Requirements

ATK 26-18-11-96: The union screw and checkpoints. Design, dimensions and general technical requirements

GOST 10272-77: Double entry centrifugal pumps. Specification

GOST 10494-80: Studs for flanged connections with lens-shaped seals for pn - 10-100 MPa (100-1000 kgf/sq sm). Technical requirements

GOST 10580-74: Foundry equipment. General specifications

GOST 10602-94: Hexagon head bolts with thread diameter over 48 mm. Product grade B. Specifications

GOST 10605-94: Hexagon nuts with thread diameter over 48 mm. Product grade B. Specifications

GOST 10617-83: Heating boilers with heat output heating capacity from 0.10 to 3.15 mw

GOST 10944-75: Control valves of the heating installations for building water heating systems

GOST 11075-93: Hexagonal socket dog-point set screws. Product grades A and B. Specifications

GOST 11101-73: Air-foam nozzle. Specifications

GOST 11101-93: Air foam hoses. Specifications.

GOST 11200-75: Objectives and body-tubes of the microscopes. Attaching dimensions

GOST 11442-74: Axial fans of general purpose

GOST 11447-80: Locking studs for Py 10-100 MPa (100-1000 kgf/cm2). Technical requirements

GOST 11530-93: Rail joint bolts. Specifications

GOST 11532-93: Nuts for rail joints. Specifications

GOST 11614-94: Semi-automatic flushing valves. Specifications

GOST 11646-82: Wheel fixing details and attachments for tractors, self propelled tool carriers, agricultural machines, tractor trailers and semitrailers. Dimensions

GOST 11709-81: Metric screw threads in the range 1-180 mm diameters for the parts in plastics. Profile, basic dimensions and tolerances

GOST 11713-78: Tractor and combine diesels. Flywheels. General technical conditions

GOST 11779-74: Moulding combined tamper and rammer. Design

GOST 11784-74: Rectangular finishing trowels. Design

GOST 11797-74: Triple-edged knives for shaping foundry cores. Design

GOST 11798-74: Corrugating rolls for cleaning foundry cores. Design

GOST 11800-74: Short vent needles. Design

GOST 11871-80: Slotted round nuts, product grade A. Specifications

GOST 11897-78: Tripods for geodetic instruments. General specifications

GOST 11897-94: Tripods for geodetic instruments. General technical requirements and methods of tests

GOST 11906-77: Spiral bevel and hypoid gear-shaping cutter heads. Specifications

GOST 12080-66: Cylindrical ends of the shafts

GOST 12081-72: 1:10 Conical shaft ends. Basis dimensions. Permissible torque

GOST 12126-86: Small power electric machines. Mounting dimensions

GOST 12198-66: Holding devices. Guiding shoes. Design

GOST 12199-66: Holding devices. Groove screws for tension springs. Design

GOST 12200-66: Holding devices. Eye-screws for tension spring. Design

GOST 12201-66: Holding devices. Quick detachable bolts for slots of machines. Design

GOST 12202-66: Holding devices. Screw plugs. Design

GOST 12203-66: Holding devices. Round blind nuts. Design

GOST 12205-66: Holding devices. Low legs. Design

GOST 12211-66: Holding devices. Cylindrical locating pins of changeable type. Design

GOST 12212-66: Holding devices. Cut locating pins of changeable type. Design

GOST 12219-66: Holding devices. Thread washers. Design

GOST 12247-80: Large seamless steel gas cylinders for operating pressure of 31,4 and 39,2 MPa (320 and 400 kgf/cm sq.). Specifications

GOST 12458-67: Screws with bead. Design

GOST 12459-67: Strengthening bolts for machined slots. Design

GOST 12460-67: Nuts with lock screws. Design

GOST 12463-67: Pressure screws with star handle. Design

GOST 12464-67: Threaded bushes. Design

GOST 12465-67: Stop pins. Design and sizes

GOST 12466-67: Shackles with thread holes. Design and sizes

GOST 12468-67: Eccentrics double-supported. Design

GOST 12469-67: Countersunk axles. Design

GOST 12470-67: Forks with thread holes. Design

GOST 12479-67: High, permanent supports. Design

GOST 12481-67: Adjustable stays with ball headed. Design

GOST 12593-93: Metal cutting machine tools. Flanged spindle noses with swireluashers and flanges of fixtures. Basic and coupling dimensions

GOST 12595-2003: Metal-cutting machine tools. Flanged spindle noses of А type and flanges of fixtures. Basic and coupling dimensions

GOST 12595-85: Metal-cutting machine-tools. Flanged spindle noses of A type. Basis and coupling dimensions

GOST 12893-83: Single-seated, double-seated and cage control valves.

GOST 12946-67: Overhead collar nut for machine retaining devices. Design and dimensions

GOST 12962-80: Medium expansion foam-making branch pipes. Specifications

GOST 13040-67: Round nuts for tool holders. Dimensions

GOST 13044-83: Arbouns for shell multiflute drills and reamers. Construction and dimensions

GOST 13044-85: Arbouns for shell multiflute drills and reamers. Construction and dimensions

GOST 13054-80: Generators for tractors and self-propelled agricultural machinery

GOST 13152-67: Bolts for machine slots. Design and dimensions

GOST 13153-67: Wedge clamps. Design and dimensions

GOST 13156-67: Bushes of tangential clamps with thread hole for machine retaining devices. Design and dimensions

GOST 13158-67: Screw sprags built-in for machine retaining devices. Design and dimensions

GOST 13159-67: Adjustable jacks for machine retaining devices. Design and dimensions

GOST 13161-67: Bayonet type indexes for machine retaining devices. Design and dimensions

GOST 13162-67: Rack type indexes for machine retaining devices. Design and dimensions

GOST 13163-67: Rack type clips with tapered lock for machine retaining devices. Design and dimensions

GOST 13252-91: Swing check valves for Pnom £25 MPa (250 kgf/cm2). General specifications

GOST 13336-67: Sleeves for tools with tapered shank. Design and dimensions

GOST 13427-68: Nuts with hole for handle for machine retaining devices. Design and sizes

GOST 13428-68: Dog point pressure screws for machine retaining devices. Design

GOST 13429-68: Pressure screws with point for foot for machine retaining devices. Design

GOST 13432-68: Pressure dog point screws with hole for handle for machine retaining devices. Design

GOST 13433-68: Pressure screws with hole for handle and point for foot for machine retaining devices. Design

GOST 13434-68: Hexagon head dog point pressure screws for machine retaining devices. Design

GOST 13435-68: Hexagon head pressure screws with point for foot for machine retaining devices. Design

GOST 13447-68: Movable handles for machine retaining devices. Design

GOST 13547-79: Butterfly valves for pnom up to 2.5 MPa (25 kgf/cm2)

GOST 13785-68: Arbors with tapered shank 7:24 and face keys for shell face cutters. Design and dimensions

GOST 13786-68: Arbors with tapered 7:24 and longitudinal key for shell cutters. Design and dimensions

GOST 13787-68: Arbors with tapered shank and longitudinal key without lug for shall cutters. Design and dimensions

GOST 13788-68: Arbors with tapered shank and face keys without lug for shell face cutters. Design and dimensions

GOST 13792-68: Adapters with pulling-off nut for end cutters with tapered shank. Design and dimensions

GOST 13795-68: Carries stems of boring bars. Dimensions

GOST 13876-87: Spindle noses for modular type machines. Basic dimensions

GOST 13896-68: Adjusting square countersunk headed screws. Design

GOST 13897-68: Check square countersunk headed screws with shortened cylindrical end. Design

GOST 14034-74: Centre holes. Dimensions

GOST 14279-79: Sleeved water collecting. Technical conditions

GOST 14630-80: Fire water sprinklers and drenchers

GOST 14724-69: Eye bolts. Design

GOST 14726-69: Knurled nuts. Design

GOST 14727-69: Spherical and hexagon nuts. Design

GOST 14728-69: Four-armed nuts. Design

GOST 14729-69: Cylindrical countersunk nuts. Design

GOST 14730-69: Blocks for finished machine tool slots. Design

GOST 14731-69: Knurled head pressure screws. Design

GOST 14732-69: Sliding swing clamps shaped. Design

GOST 14733-69: Hook clamps. Design

GOST 14735-69: Swing clamps. Design

GOST 14736-69: Detachable clamps. Design

GOST 14739-69: Round keys. Design

GOST 14741-69: Four armed handles. Design

GOST 14743-69: Hooks. Design

GOST 1476-93: Cone-point straight slatted set screws. Product grades A and B. Specifications

GOST 1477-93: Flat-point straight slotted set screws. Product grades A and B. Specifications

GOST 1478-93: Dog-point straight slotted set screws. Product grades A and B. Specifications

GOST 1479-93: Cup-point straight slotted set screws. Product grades A and B. Specifications

GOST 14901-93: Moulds for the manufacture of industrial rubber articles

GOST 15062-83: W.c. bowl seats. Specifications

GOST 15069-75: Tool holders with straight guide and Morse taper shank for horizontal milling machines. Design and dimensions

GOST 15070-75: Tool holders with supporting bush and Morse taper shank for horizontal milling machines. Design and dimensions

GOST 15506-91: All-cast molding boxes made of aluminum and magnesium alloys.

GOST 15510-70: Removable nut stops with joint pin for boring bars and boring arbors. Design

GOST 15511-70: Back nuts for boring bars and boring arbors. Design

GOST 15514-70: Nut stops for boring bars and boring arbors. Design

GOST 1556-67: Screw type stop with wedge for machine retaining devices. Design

GOST 1559-67: Screw sprags for machine retaining devices. Design

GOST 1560-67: Screw ties for machine retaining devices. Design

GOST 15763-91: Pipeline thread connections for Py up to 63 MPa (up to 630 kgf/cm2)

GOST 15948-76: Thread-forming pieces for moulding metric thread in plastic articles. Size calculation

GOST 16016-79: Bolts and screw-nuts for rail track crossing

GOST 16017-79: Inserted bolts for rail track fastenings.

GOST 16018-79: Nuts for clamp and inserted bolts of rail track fastenings

GOST 16078-70: Tube connections on internal cone. Technical requirements

GOST 160-84: Spindles for twisting and spinning machines

GOST 16093-2004: Basic norms of interchangeability. Metric screw thread. Tolerances. Clearance fits

GOST 16226-81: End double-tooth mill threaded shank for machining light alloys. Design and dimensions

GOST 16234-70: Turn-out chill mould. Basic dimensions

GOST 16242-70: Chill moulds. Screwed handles. Construction and dimensions

GOST 16247-70: Chill moulds. Devices for push of castings. Construction and dimensions

GOST 16248-70: Chill moulds. Guide pins. Construction and dimensions

GOST 16253-70: Chill moulds. Screwed core removers. Construction and dimensions

GOST 16257-70: Chill moulds. Rack core removers. Construction and dimensions

GOST 16258-70: Chill moulds. Hydraulic core removers. Construction and dimensions

GOST 16259-70: Chill moulds. Pneumatic core removers. Construction and dimensions

GOST 16324-83: Cast iron diaphragm control valves with pneumatic diaphragm actuator

GOST 16345-70: Universal single-rolled devices for a surface hardening of machine parts by rolling. Types. Technical requirements

GOST 16376-70: Die blocks of sizing dies. Construction and dimensions

GOST 16438-70: Sand and metal moulds for making of fluidity of metals tests

GOST 16488-70: Drivers for grinding. Design

GOST 16549-71: Sleeve type iron plug valves with gland and blind flange for drainage for Py <= 10 kgf/sq.cm

GOST 16675-80: Punches, female dies, holders, liner plates and keys. Specifications

GOST 16716-71: Threaded shanks for dies of sheet pressing. Construction and dimensions

GOST 16717-71: Shouldered and threaded shanks for dies of sheet pressing. Construction and dimensions

GOST 16720-71: Shanks with punch hole for dies of sheet pressing. Construction and dimensions

GOST 16817-71: Sand and metal moulds for determination of linear shrinkage of non-ferrous metals and alloys. Design and dimensions. Technical requirements

GOST 16890-71: Plates for knee rack-and-pinion-operated jigs. Design

GOST 16893-71: Plates for portal rack-and-pinion-operated jigs. Design

GOST 16896-71: Flat bearers. Design

GOST 16897-71: Blade bearers. Design

GOST 16925-93: Taps. Manufacturing tolerances on the threaded portion

GOST 17019-78: Fixing parts for pipelines and cables. Specifications

GOST 17184-71: Turret lathe collets with rib and concentrically positioned cylindrical hole. Design and dimensions

GOST 17185-71: Turret lathe collets with rib and eccentrically positioned cylindrical hole. Design and dimensions

GOST 17201-71: Gripping collets for cutting tools with cylindrical shank. Design

GOST 17270-71: Frames for hand hack-saws. Specifications

GOST 17429-80: Magnetic catchers. Specification

GOST 17528-72: Spindle cam arbors. Design and dimensions

GOST 17548-83: The tool spindle noses of spiral bevel and hypoid gear producing machines. Types and basic dimensions

GOST 17574-72: Multiball hard differential rollers by diameters from 40 to 300 mm for dimension-finishing of openings of machine components by pressure. Technical requirements

GOST 17578-93: Thread-rolling automatic machines with roll and segment. Basic parameters

GOST 1759.0-87: Bolts, screws, studs and nuts. Specifications.

GOST 17671-72: Units and set articles for changeable sheet stamping cutting dies. Technical requirements

GOST 17695-72: Antifriction bearing assemblies with stationary retainer for sheet stamping dies. Construction and dimensions

GOST 17756-72: Threaded plug-gauges with inserts with full-form of thread of diameters from 1 to 100 mm. Design and basic dimensions

GOST 17757-72: Threaded plug-gauges with inserts with incomplete form of thread of diameters from 1 to 100 mm. Design and basic dimensions

GOST 17759-72: Threaded plug-gauges with full form of thread of diameters from 52 to 100 mm. Design and basic dimensions

GOST 17760-72: Threaded plug-gauges with incomplete form of thread of diameters from 52 to 100 mm. Design and basic dimensions

GOST 17761-72: Threaded plug-gauges with full of thread of diameter from 105 to 300 mm. Design and basic dimensions

GOST 17762-72: Threaded plug-gauges with incomplete form of thread of diameters from 105 to 300 mm. Design and basic dimensions

GOST 17763-72: Threaded plug-gauges with full form of thread of diameters from 1 to 100 mm. Design and basic dimensions

GOST 17764-72: Threaded ring-gauges with incomplete form of thread of diameters from 2 to 100 mm. Design and basic dimensions

GOST 17765-72: Threaded ring-gauges with full-form of thread of diameters from 105 to 300 mm. Design and basic dimensions

GOST 17766-72: Threaded ring-gauges with incomplete form of thread of diameters from 105 to 300 mm. Design and basic dimensions

GOST 1797-78: Thread milling machines. Norms of accuracy

GOST 18126-94: Bolts and nuts with thread diameter over 48 mm. General specifications

GOST 18260-72: Thrust centres with screwed-off nut and cone 1:10 and 1:7. Design and dimensions

GOST 18381-80: Steel pins for aerial communication lines. Specification

GOST 18438-73: Notched straight-side centre arbors. Design and dimensions

GOST 18440-73: Notched straight side sprindle arbors. Design and dimensions

GOST 18465-73: Gauges for metric thread from 1 to 68 mm. Required dimensions

GOST 18466-73: Gauges for metric thread over 68 to 200 mm. Required dimensions

GOST 18833-73: Lever-gearing measuring heads. Specifications

GOST 18843-73: Non-slaving taps. Thread tolerances

GOST 19125-90: Fittings of connections for airborne instruments. Design and dimensions

GOST 19135-80: Domestic siphons. Specifications

GOST 19171-73: Adjustable holders for angled fastening of cutter for turret lathes. Design and dimensions

GOST 19191-73: Rigging screws with automatic stopping. Specifications

GOST 19257-73: Holes for threading metric thread. Diameters

GOST 19305-73: Centrifugal moulds with threaded shank and latch locks. Construction and dimensions

GOST 19306-98: Centrifugal moulds with threaded shank and centrifugal locks. Construction and dimensions

GOST 19309-98: Centrifugal moulds with flange, inserts and centrifugal locks. Construction and dimensions

GOST 19312-73: Latch lock for centrifugal moulds. Construction and dimensions

GOST 19354-74: Shaft line flange joints. Construction and dimensions

GOST 19367-74: Ledges of aluminium core boxes. Dimensions

GOST 19369-74: Ledges with packing of aluminium core boxes. Dimensions

GOST 19372-74: Pads for handles and cramps of aluminium core boxes. Dimensions

GOST 19374-74: Lugs and pads of aluminium core boxes and intermediate plates. Dimensions

GOST 19376-74: Butt walls (plugs) for aluminium core boxes. Dimensions

GOST 19377-74: Screwed inserts of core boxes. Dimensions

GOST 19378-74: Latched inserts of core boxes. Dimensions

GOST 19381-74: Pins for core boxes. Design and dimensions

GOST 19383-74: Install pins for core boxes. Design and dimensions

GOST 19385-74: Bushes for core boxes. Design and dimensions

GOST 19387-74: Handles for core boxes. Design and dimensions

GOST 19394-74: Round and rectangular uprights for core boxes. Design and dimensions

GOST 19404-74: Aluminium split core boxes. Joining by adjustable pins

GOST 19405-74: Aluminium split core boxes. Hinge joining

GOST 19406-74: Aluminium split core boxes. Fixings by eye bolts

GOST 19407-74: Aluminium split core boxes. Fixings by eye handles

GOST 19529-74: Sealing devices of screw joints with round cross-section rubber rings. Seats. Construction and dimensions

GOST 19530-74: Sealing devices of screw joints with round cross-section rubber rings. Screw part. Construction and dimensions

GOST 19532-74: Sealing devices of screw joints with round cross-section rubber rings. Nuts. Construction and dimensions

GOST 19584-80: Units and replaceable parts of universal re-adjustable hammer dies for precision die forging by means of crank presses

GOST 19590-85: Fine-boring heads. Basic dimensions

GOST 19645-74: Moulding mallet with rubber beaters. Design

GOST 19646-74: Moulding hollow vibration-damping shoe. Design

GOST 19681-83: Water mixing and distribution accessories for sanitary and laboratory applications. General technical requirements

GOST 19750-84: Flat metal gasket joint gate end part. Design and dimensions

GOST 19751-84: Flat metal gasket joint gate seats. Design and dimensions

GOST 19853-74: Lubricating plugs. Specifications

GOST 19859-74: Plates for sheet stamping cupping dies (blanks). Specifications

GOST 19915-74: Holders with a cylindrical shank for cutting-off bit tools for turret-lathes. Design and dimensions

GOST 19933-74: General-duty units of dies for die casting. Design and dimensions

GOST 19934-74: General-duty unit for quick-changeable die sets of dies for die casting. Design and dimensions

GOST 19935-74: Quick-changeable die set of dies for die-casting. Design and dimensions

GOST 19936-74: Bases of dies for die casting. Design and dimensions

GOST 19964-74: Support plate for wax-pattern dies with max 190 mm diameter cylinder matrices. Design and dimensions

GOST 19965-74: Support plate for wax-pattern dies with min 190 mm diameter cylinder matrices. Design and dimensions

GOST 19966-74: Support plate for wax-pattern dies with rectangular matrices. Design and dimensions

GOST 19967-74: Movable retainer rings for wax-pattern dies with max 190 mm diameter cylinder matrices. Design and dimensions

GOST 19968-74: Movable retainer rings for wax-pattern dies with min 190 mm diameter cylinder matrices. Design and dimensions

GOST 19969-74: Movable retainer rings for wax-pattern dies with rectangular matrices. Design and dimensions

GOST 19970-74: Stationary retainer rings for wax-pattern dies with max 190 mm diameter cylinder matrices. Design and dimensions

GOST 19971-74: Stationary retainer rings for wax-pattern dies with min 190 mm diameter cylinder matrices. Design and dimensions

GOST 19972-74: Stationary retainer rings for wax-pattern dies with rectangular matrices. Design and dimensions

GOST 19976-74: Ejector plate-blanks for wax-pattern dies with max 190 mm diameter cylinder matrices. Design and dimensions

GOST 19977-74: Ejector plate-blanks for wax-pattern dies with min 190 mm diameter cylinder matrices. Design and dimensions

GOST 19978-74: Intermediate plate-blanks for wax-pattern dies with rectangular matrices. Design and dimensions

GOST 19982-74: Base-blanks for wax-pattern dies with max 190 mm diameter cylinder matrices. Design and dimensions

GOST 19983-74: Base-blanks for wax-pattern dies with min 190 mm diameter cylinder matrices. Design and dimensions

GOST 19984-74: Base-blank for wax-pattern dies with rectangular matrices. Design and dimensions

GOST 19996-74: Put-in nipple for wax-pattern dies. Design and dimensions

GOST 20131-80: Pattern plates

GOST 2016-86: Thread gauges. Specifications

GOST 20506-75: Pivoting arbours for shell reamers for turret lathes. Design and dimensions

GOST 20539-75: End mills with solid carbide tips and with spiral carbide blades. Specifications

GOST 20572-83: Two-screw pumps and pump units. Specification

GOST 20746-84: Vice for precision machining

GOST 20849-94: Heating convectors. Specifications

GOST 20868-81: Adjusting fixturing supports. Technical requirements

GOST 21167-75: Machine bar centering vices with screw and lever. Design and main dimensions

GOST 21168-75: Machine bar centering vices with screw and prismatic jaws. Design and main dimensions

GOST 21187-75: Support holders for tangential cutters of automatic turret lathes. Design and dimensions

GOST 21188-75: Support holders for direct clamping of lathe cutters. Design and dimensions

GOST 21189-75: Prismatic supports for automatic lathe holders. Design and dimensions

GOST 21190-75: Roll supports for automatic turret lathe holders. Design and dimensions

GOST 21200-75: Support holders for tangential cutters of turret lathes. Design and dimensions

GOST 21201-75: Support holders for skew clamping of turret lathe cutters. Design and dimensions

GOST 21249-81: Blunt bolts. Construction and dimensions

GOST 21249-96: Blunt bolts for general purpose. Basic parameters and dimensions

GOST 21295-75: Adjustable ejectors for heated core boxes. Design and dimensions

GOST 21296-75: Centring bushes with screw hole for heated core boxes. Design and dimensions

GOST 21297-75: Guide bushes with screw hole for heated core boxes. Design and dimensions

GOST 21298-75: Pins with screw hole for heated core boxes. Design and dimensions

GOST 21299-75: Pins with screw tail for heated core boxes. Design and dimensions

GOST 21300-75: Centring joining with clamps for heated core boxes. Design and dimensions

GOST 21301-75: Guide joining with clamp for heated core boxes. Design and dimensions

GOST 21331-75: High knurled-head screws. Construction and dimensions

GOST 21332-75: Low knurled-head screws. Construction and dimensions

GOST 21333-75: Low knurled-head and cone-point screws. Construction and dimensions

GOST 21334-75: Low knurled-head and step-point screws. Construction and dimensions

GOST 21335-75: Low knurled-head and cup-point screws. Construction and dimensions

GOST 21337-75: Low knurled-head and flat-dog point screws. Construction and dimensions

GOST 21459-82: Removable guides for sheet stamping dies. Construction and dimensions

GOST 21765-76: Self-opening threadcutting die heads with circular. Technical conditions

GOST 21804-94: Shut-Off Devices for Cylinders With Liquefied Hydrocarbon Gases With Pressure Up To 1.6 Mpa

GOST 22032-76: Studs with threaded end of 1d. Product grade B. Construction and dimensions

GOST 22034-76: Studs with threaded end of 1,25d. Product grade B. Construction and dimensions

GOST 22036-76: Studs with threaded end of 1,6d. Product grade B. Construction and dimensions

GOST 22038-76: Studs with threaded end of 2d. Product grade B. Construction and dimensions

GOST 22040-76: Studs with threaded end of 1,2d. Product grade B. Construction and dimensions

GOST 22065-76: Plate-blanks of injection moulds. Design and dimensions

GOST 22066-76: Clamping plate-blanks of injection moulds. Design and dimensions

GOST 22069-76: Cross-forming supporting plate-blanks of injection moulds. Design and dimensions

GOST 22070-76: Rectangular supporting plate-blanks of injection moulds. Design and dimensions

GOST 22072-76: Guide pins of injection moulds. Design and dimensions

GOST 22073-76: Guide bushings of injection moulds. Design and dimensions

GOST 22079-76: Shanks of injection moulds. Design and dimensions

GOST 22080-76: Shouldered shanks of injection moulds. Design and dimensions

GOST 22081-76: Flange-blanks of injection moulds. Design and dimensions

GOST 22130-86: Steel Pipeline Parts Movable supports and suspensions Specifications

GOST 22329-93: Screw strainers for wooden split core boxes. Design

GOST 22333-93: Bolt lifting screw for wooden cast patterns. Design

GOST 22472-87: Dies for a sheet-metal stamping

GOST 22474-77: Pins for fixing and securing the patterns on master pattern plates. Design and dimensions

GOST 22475-77: Bolt fixtures for master pattern plates. Design and dimensions

GOST 2248-80: Flat thread-rolling dies

GOST 22559-77: Shanks of press-moulds for pressure moulding of thermoset articles. Construction and dimensions

GOST 22560-77: Pushers of composite shanks for press-moulds for pressure moulding of thermoset articles. Construction and dimensions

GOST 22561-77: Tips of composite shanks for press-moulds for pressure moulding of thermoset articles. Construction and dimensions

GOST 22623-77: Fixtures for spindle-operated electronic components. Basic dimensions

GOST 22627-77: Tapping chucks for turret-lathes. Design and dimensions

GOST 22628-77: Sockets for tapping chucks for turret-lathes. Design and dimensions

GOST 22629-77: Movable chasing chucks for automatic lathes. Design and dimensions

GOST 22630-77: Sockets for movable chasing chucks for automatic lathes. Design and dimensions

GOST 22742-77: Sets of square connectors fixture of radio electronic items. Specifications

GOST 22790-83: Assembly units and pipelines components, designed for рnom over 10 to 100 MPa (from 100 to 1000 kgf/cm2). General specifications

GOST 22790-89: Assembly units and pipelines components, designed for рnom over 10 to 100 MPa (from 100 to 1000 kgf/cm2)

GOST 2287-88: Flat thread chasers

GOST 22908-78: Dresser diamonds. Specifications

GOST 22965-78: Pins for moulding boxes. Construction and dimensions

GOST 23022-78: Double cartridge boring heads. Types and basic dimensions

GOST 23074-85: Fertilizer placers for liquid organic fertilizers

GOST 23212-78: Units of versatile press tools for clipping. Specifications

GOST 2323-76: Noses of grinding spindles with outside taper. Coupling dimensions

GOST 2324-77: Grinding spindle noses with internal datum surfaces. Coupling dimensions

GOST 23289-94: Waste water drain sanitary accessories. Specifications

GOST 23982-85: Fertilizing machinery

GOST 24110-80: Keyway plug gauges with diameter from 9 to 18 mm. Design and dimensions

GOST 24111-80: Keyway plug gauges with diameter over 18 to 56 mm. Design and dimensions

GOST 24112-80: Keyway plug gauges with diameter over 56 to 125 mm. Design and dimensions

GOST 24114-80: Keyway prism gauges for shafts with diameter over 22 to 200 mm. Design and dimensions

GOST 24140-80: Pipe-line fastening parts. Cramps and clamps. Specifications

GOST 24201-80: Connective and fastening components of glass pipelines

GOST 24351-80: Three- and two-jaw lathe self-centring chucks with wedge and lever-type clamps. Basic dimensions

GOST 24379.1-80: Foundation bolts. Structure and dimensions

GOST 24401-80: Casting die beams. Construction and dimensions

GOST 24469-80: Instruments for measurements of laser radiation parameters

GOST 24611-81: Magazine pattern plates. Basic parameters and dimensions

GOST 24644-81: Spindle noses and tool shanks of drilling, boring and milling machines. Dimensions. Technical requirements

GOST 24808-81: Brush holders and brackets for traction and electrical machines. Serrate rifling. Dimensions

GOST 24834-81: Basic norms of interchangeability. Metric screw thread. Transition fits

GOST 24906-81: Gear-shaping cutter heads for straight bevel gears

GOST 24939-81: Gauges for parallel threads. Types

GOST 24997-81: Gauges for metric threads. Tolerances

GOST 25164-82: Connections of SSI instruments and devices with external hydraulic and gas lines. Types, basic parameters and dimensions. Technical requirements

GOST 25165-82: Connections of SSI instruments and devices with external pneumatic lines. Types, basic parameters and dimensions. Technical requirements

GOST 25229-82: Basic norms of interchangeability. Metric taper screw thread

GOST 25455-82: Rolling bearings. Tapered and withdrawal sleeves. Technical requirements

GOST 25553-82: One stage hydraulic cylinders at nominal pressure 16 MPa. Connected threads of rods and plungers

GOST 25735-83: Sidewall sampling apparatus. Types, basic parameters and technical requirements

GOST 2575-79: Thrust centres with nut screwed-off nut. Design

GOST 25797-83: Products of lock and hardware for the focal elements of enclosing structures made of aluminum alloys. General specifications

GOST 25933-83: Screws with cheese head of smaller diameter for electrical engineering. Construction and dimensions

GOST 26153-84: One-column dividing stands

GOST 26234-84: Head-type jig replaceable bushing of with standard and enhanced accuracy. Design and Dimensions

GOST 26258-87: Counterbores designed for working bearing surfaces under fastenings. Specifications

GOST 26259-87: Cuides. Design and dimensions

GOST 26405-84: Tools for manufacturing bolts and nuts using cold heading machines

GOST 26576-85: Rolling bearings. Eccentric and concentric stopping rings and setting serews for ball bearing securing

GOST 26582-85: Food (manufacturing) industry machines and equipment

GOST 26613-85: Lathe tools with mechanic fastening of replaceable faceted plates

GOST 26756-85: Furniture for trade enterprises. General specifications

GOST 26840-86: Electrically-and-hand driven ventilating sets erv 72-2 and erv 72-3

GOST 26860-93: Holders with clamp screw for flatted parallel shank end mills. Dimensions of the driving system of tool shanks

GOST 26862-86: Rins. General specifications

GOST 27320-87: Expansive bolts. Construction

GOST 27358-87: Press moulds for manufacturing of plastic items

GOST 27962-88: Industrial equipment

GOST 2822-78: Threaded ends of marine valves and fittings. Types, main characteristics and dimensions and technical requirements

GOST 2832-77: Adjusting rings with screw fastening. Dimensions

GOST 28456-90: Expansive dowels for building. General specifications

GOST 28778-90: Expansion bolt self-anchoring for building. Specifications

GOST 30086-93: Jig bushes and accessories for drilling purposes. Dimensions

GOST 30496-97: Emergency stop valves for pneumatic systems of railway rolling stock brake equipment. General specifications

GOST 3055-69: Ball head handles. Design

GOST 30735-2001: Heating hot-water boilers with capacity from 0,1 to 4,0 MW. General specifications

GOST 30892-2002: Basic norms of interchangeability. Metrical MJ theads. Profile, general plan, tolerances

GOST 31.0151.01-90: Universal and special-purpose setters

GOST 31.111.41-83: System of standards for technological arrangement. Elements and assembly juntions of universal assembly devices for metal-cutting machines. Basic parameters. Constructive elements. Precision norms

GOST 31.2031.02-91: Readjusted collapsible devices for part assembly under welding

GOST 3124-77: Hose connections for flexible hoses of monitors. Specifications

GOST 3385-69: Wing nuts. Desing

GOST 3849-78: Accessories for vertical cylindrical strorace tank for pertoleum products. Cast iron joints for swing tube

GOST 3859-83: Turret heads for turret lathes. Basic dimensions

GOST 3933-75: Still photo and movie camera lenses. Joined dimensions for accessories

GOST 4084-68: Adjustable rests for machine retaining devices. Design

GOST 4085-68: Adjustable hexagon head rests for machine retaining devices. Design

GOST 4086-68: Adjustable round head rests for machine retaining devices. Design

GOST 4608-81: Basic norms of interchangeability. Metric screw thread. Interference fits

GOST 4734-69: Swing clamp straps. Design

GOST 4735-69: Sliging clamp straps. Design

GOST 4736-69: Tiltable clamp straps. Design

GOST 4738-67: Forks with thread shanks. Design

GOST 4739-68: Ears for machine retaining devices. Design

GOST 4741-68: Thread ransitional bushes for machine retaining devices. Design

GOST 4751-73: Screw rings. Specifications

GOST 4860.1-83: Glands for for electric cables and wires

GOST 5044-79: Thin-walled steel drums for chemical products

GOST 5762-2002: Pipeline industrial valves. Gate valves PN<=250. General specifications

GOST 6393-73: Round nuts with set pin holes in side, product grade A. Design and dimensions

GOST 6628-73: Ramshorn hooks. Blanks. Type. Construction and dimensions

GOST 7183-93: Foam mixers. Specifications.

GOST 7210-75: Hand-held metal-cutting shears

GOST 7275-75: Adjustable wrenches

GOST 7498-75: Fire hydraulic elevator. Specifications

GOST 7498-93: Hydro elevators for firefighting. Specifications.

GOST 7600-90: Press-forging plant

GOST 799-73: Fishplate bolts for broad gauge. General requirements

GOST 8037-93: Hose branches. Specifications.

GOST 8144-73: Fishplate bolts for narrow gauge

GOST 8220-85: Underground fire hydrants. Specifications

GOST 8519-88: Diesel high-pressure fuel lines and connections. General specifications

GOST 8519-93: Diesel engine fuel injection pipes and their connections

GOST 8530-83: Ball and roller bearings. Nuts, round, slotted for fastening and connecting bushings. Specification

GOST 8530-90: Rolling bearings. Locknuts, washers and cramps for tapered adaptive and withdrawal sleeves. Specifications

GOST 8592-79: Rotating electrical machines. Mounting and connecting dimensions. Tolerances and control methods

GOST 8615-89: Universal dividing heads

GOST 8724-2002: Basic norms of interchangeability. Metric screw threads. General plan

GOST 8850-80: Console for cable wells and communication shafts

GOST 8878-93: Hexagonal socket cone-point set screws. Product grades A and B. Specifications

GOST 8918-69: Hexagon nuts with bead. Design

GOST 8921-69: Swing handle nuts. Design

GOST 8922-69: Loaded screws (journals). Design

GOST 8923-69: Cylindrical handles. Design

GOST 8924-69: Levers with ball handles. Design

GOST 9.303-84: Unified system of corrosion and ageing protection. Metallic and non-metallic inorganic coatings. General requirements for selection

GOST 9029-72: Fire turntable combined monitor

GOST 9047-69: Hook bolts. Construction

GOST 9048-69: Spherical head bolts. Construction

GOST 9049-69: Locking screws. Construction

GOST 9051-68: Hexagon socket dog point pressure screws for machine retaining devices. Design

GOST 9052-69: Shouldered screws. Design

GOST 9057-69: Double-sided swing clamp straps. Construction

GOST 9059-69: Bushes for hook clamps straps. Construction

GOST 9074-85: Joined by pins slot cloths

GOST 9150-2002: Basic norms of interchangeability. Metric screw threads. Profile

GOST 9321-73: Rollers. Specifications

GOST 9399-81: Threaded steel flanges for Pn 20-100 MPa (200-1000 kgf/sq sm). Specifications.

GOST 9400-81: Threaded connecting ends for valves, fittings and pipes with tens - shaped seals for pn20-100 mpa (200-1000 kgf/cm2) dimensions

GOST 9520-73: Vertical fine boring machines. Basic dimensions

GOST 9539-72: Thread rolls. Specifications

GOST 9696-82: Multi-revolution dial indicators graduated in 0,001 and 0,002 mm. Types. Basic parameters. Specifications

GOST 9731-79: Large capacity seamless steel gas-cylinders for operation pressure 4.5 MPa (250 kgf / cm2)

GOST 9740-71: Circular screw dies. Specifications

GOST 9923-80: Manual fire barrel. Specifications

GOST R 50253-92: Rail joint bolts. Specifications

GOST R 50273-92: Prevailing torque type hexagon nuts (with non-metallic insert). Property classes 5, 8 and 10. Specifications

GOST R 50327.2-92: Anaesthetic and respiratory equipment. Conical connectors. Part 2. Screw-threaded weight-bearing connectors

GOST R 50398-92: Fire hydraulic elevator. Specifications

GOST R 50399-92: Air-foam nozzles. Specifications

GOST R 50400-92: Hose branching. Specifications

GOST R 50401-92: Suction gauzes. Specifications

GOST R 50403-92: Countersunk head screws. Product grades A and B. Specifications

GOST R 50405-92: Slotted cheese head screws. Product grades A and B. Specifications

GOST R 50408-92: Foam mixers. Specifications

GOST R 50409-92: Medium expansions foam-making branch pipes. Specifications

GOST R 50592-93: Hexagon nuts with flange. Product grade A. Specifications

GOST R 50790-95: Hexagon head bolts with metric fine pitch thread, product grades A and B. Specifications

GOST R 50794-95: Hexagon head bolts, product grade C. Specifications

GOST R 51043-2002: Аutomatic water and foam fire fighting systems. Sprinklers, spray nozzles and water mist nozzles. General technical requirements. Test methods

GOST R 51733-2001: Gas-fired central heating boilers fitted with atmospheric burners of nominal heat input not exceeding 70 kW. Safety requirements and test methods

GOST R 51842-2001: Automatic shut-off valves for gas burners and gas appliances. General technical requirements and test methods

GOST R 51843-2001: Flame supervision devices for gas burning appliances. Thermo-electric flame supervision devices. General technical requirements and test methods

GOST R 51982-2002: Gas appliances pressure governors for inlet pressure up to 20 kPa. General technical requirements and test methods

GOST R 51983-2002: Multifunctional controls for gas burning appliances. General technical requirements and test methods

GOST R 52057-2003: Taps for gas burning appliances. General technical requirements and test methods

GOST R 53249-2009: Fire-fighting equipment. Sleeved water collecting. General technical requirements. Methods of testing

GOST R 53250-2009: Fire-fighting equipment. Fire standpipe. General technical requirements. Methods of testing

GOST R 53251-2009: Fire-fighting equipment. Hand foam-nozzles. General technical requirements. Methods of testing

GOST R 53252-2009: Fire-fighting equipment. Foam mixers. General technical requirements. Methods of testing

GOST R 53253-2009: Fire-fighting equipment. Suction gauzes. General technical requirements. Methods of testing

GOST R 54448-2011: Single burner gas-fired overhead radiant tube heaters for non-domestic use. Part 1. Safety requirements

GOST R EN 257-2004: Mechanical thermostats (thermoregulators) for gas appliances. General technical requirements and test methods

NB ZhT TsSh 136-2003: Headsets electric drives for switches. Safety standards

NPB 87-2000: Automatic water and foam fire-extinguishing systems. Nozzles. General technical requirements. Test methods

OST 108.033.01-86: mechanical stokers. Technical conditions.

OST 108.343.01-80: Clips of supports of CHP plant and nuclear thermal power plant pipelines. Design and dimensions.

OST 108.530.01-82: Lobes for CHP plant pipelines. Design and dimensions.

OST 108.530.02-82: Threaded bushing. Construction and dimensions.

OST 108.530.03-82: Lobes for CHP plant pipelines. Design and dimensions.

OST 108.724.01-82: Plugs for CHP plant pipelines. Design and dimensions.

OST 108.724.02-82: Control thimble. Design and dimensions.

OST 108.764.01-80: Cylindrical helical springs for CHP plant and NTP plant pipeline hangers. Construction, dimensions and specifications.

OST 24.090.39-78: Shell stacker cranes. Specifications.

OST 24.090.39-83: Shell stacker cranes. General specifications.

OST 24.125.22-89: Lobes for pipelines of nuclear thermal power plant. Design and dimensions.

OST 24.125.23-89: Plugs for nuclear thermal power plant pipelines. Design and dimensions.

OST 24.125.57-89: Lobes for pipelines of nuclear thermal power plant. Design and dimensions.

OST 24.201.03-90: Steel high-pressure vessels and devices. General technical requirements.

OST 26.260.18-2004: Process modules for oil and gas industry. General technical specifications

OST 26-01-48-82: Assembling units and pipeline details. Flanged connections with bilateral cap or ring. Design and dimensions.

OST 26-02-910-80: Condensate expanders. Specifications

OST 26-04-1035-74: Assembling units and fastening details of cold pipelines with a diameter from 100 to 1020 mm. Design and dimensions.

OST 26-04-2000-77: Plugs. Design and dimensions. Specifications.

OST 26-1420-75: Adjusting screws, nuts and support plates for equipment installation. Construction and dimensions.

OST 26-18-5-88: Technological units of gas and oil industry. General technical requirements.

OST 26-2037-96: Bolts with hexagonal head for flange joints. Design and dimensions.

OST 26-2038-96: Hex nuts for flange connections. Construction and dimensions.

OST 26-2039-96: Studs with screw-end for flanged connections (single precision). Design and dimensions.

OST 26-2040-96: Studs for flanged joints. Design and dimensions

OST 26-2041-96: Nuts for flange connections. Construction and dimensions.

OST 26-665-87: Supports –rack for vertical devices. Styles, designs and dimensions

OST 34-10-504-95: Details and components of TPS pipelines. Flanged connections for disk orifice plates of TPS pipelines for Pnom 2.5 MPa (25 kg/cm2). Construction and dimensions.

OST 34-10-739-93: Threaded rods with coupling. Design and dimensions.

OST 34-10-757-97: Parts and assembly units of pipelines of TPPs at Rrab <2.2 MPa (22 kgf

OST 34-13-016-88: Self-tapping bolts. Design and dimensions. Technical requirements

OST 34-13-931-86: Steel Pins for insulators. Specifications.

OST 36-146-88: Bearings for steel industrial pipelines for P 10 MPa. Specifications.

OST 36-62-81: Hoisting equipment. General technical requirements.

OST 37.001.125-81: Countersunk screws. Construction and dimensions.

OST 37.001.137-83*: Self-locking hex nuts, crimped at the end. Construction and dimensions

OST 48-41-91: Engineering products of non-ferrous metallurgy. General Specifications.

PB 03-108-96: Process pipeline design and safe operation rules

RD 153-34.0-04.185-2003: Machines and equipment for construction, technical re-equipment and repair of energy facilities. Requirements for design, materials, manufacturing, acceptance and testing

RD 153-34.1-39.603-99: Fittings repair manual of high parameters.

RD 153-34.1-39.605-2002: General Requirements and Guidelines for Use of Thermally Expanded Graphite Seals in Thermal Power Station Valves

RD 22-207-88: Lifting machines. General requirements and production standards

RD 26.260.007-92: Pipelines and pipeline parts for pressure of 250 MPa (2500 kgf/cm2) of polyethylene production. Basic technical requirements, certification, operation and repair

RD 31.70.05-91: Model Guidelines for Standard Procedures and Occupational Safety and Health in Diving Operations

RD 34.35.606: General Guide to Overhaul of Thermal Automation and Measuring Equipment

RD 36-62-00: Hoisting equipment. General technical requirements.

RST RSFSR 91-78: Percussion musical instruments. General technical requirements

RTM 26-79-72*: Application of standards of a unified system of design documentation (ESKD)

SNiP III-34-74: Automation Systems

SP 53-101-98: Manufacturing and quality control of steel structures for construction

TU 34-38-20140-94: Valves of gas pipelines TPP. General technical conditions for major repairs

TU 34-38-20197-94: Valves for steam and water DN 10, 20, 40, 50, 65 mm Chekhov factory of power engineering. Technical conditions for major repairs

TU 34-38-20365-94: Power valves. General technical conditions for major repairs

TU 34-38-20409-94: Pulse-safety devices Chekhov factory of power engineering. General technical conditions for major repairs

TU 36-2203-84: Racks of radio transmission lines and additional products to them. Technical conditions

TU 3680-001-04698606-04: Pipe Support

TU 3742-001-96231033-2006: Swing check valve type 19s38nzh and 19s73nzh. Technical conditions

TU 4218-003-17416124-99: Connection box for electrical wiring. Technical conditions

VSN 279-85: Guidelines for Sealing Joints in Ventilating and Plumbing Systems

VSN 39-87: Ordinance for Planned Preventive Maintenance and Operation of Production Equipment at Construction Industry Companies Administered by the USSR Gosagprom. Part 1

Customers Who Viewed This Item Also Viewed:

Special railway rolling stok. Dynamic and strength testing procedures
Language: English
Price: $198.00
Blanks for marine shafts and rudder stocks. Specifications
Language: English
Price: $216.00
Tempered glass. Specifications.
Language: English
Price: $149.00
Glass with low emissivity hard coating. Specifications.
Language: English
Price: $212.00
Glass laminated. Specifications.
Language: English
Price: $231.00

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!