GOST 3647-80
ГОСТ 3647-80
|
|
Abrasives. Grain sizing. Graininess and fractions. Test methods
Материалы шлифовальные. Классификация. Зернистость и зерновой состав. Методы контроля
Status: Effective - Supersedes. The limitation of effectiveness has been lifted: Decree of the State Standard No. 1607 of 10/11/91
The standard applies to grinding materials made of artificial and natural abrasive materials for the manufacture of abrasive tools, as well as for use in free-grain processing operations. The standard does not apply to grinding materials derived from synthetic and natural diamonds, as well as from cubic boron nitride.
Стандарт распространяется на шлифовальные материалы из искусственных и природных абразивных материалов, предназначенные для изготовления абразивных инструментов, а также для использования на операциях обработки свободным зерном. Стандарт не распространяется на шлифовальные материалы, получаемые из синтетических и природных алмазов, а также из кубического нитрида бора.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee for Standards,
5/21/1980
SKU: RUSS69929
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
25 Mechanical Engineering »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.12 Testing and control of products of metallurgical industry »
4.12.6 Metal products »
ISO classifier »
25 MECHANICAL ENGINEERING »
25.100 Cutting tools »
25.100.70 Abrasives »
National standards »
25 MECHANICAL ENGINEERING »
25.100 Cutting tools »
25.100.70 Abrasives »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G2 Industrial tools and accessories »
G25 Abrasive tools, diamond and abrasive materials »
As a Replacement Of:
GOST 3647-71: Abrasive materials in grain. Classification by size, standards of grain composition and test methods
The Document References:
GOST 13739-78: Immersion oil for microscopy. Technical requirements. Methods of testing
GOST 18300-87: Technical rectified ethyl alcohol. Specifications
GOST 21445-84: Abrasive materials and tools. Terms and definitions
GOST 29298-92: Cotton and mixed fabrics for domestic use
GOST 6613-86: Square meshed woven wire gauzes
GOST 6672-75: Cover glasses for micropreparations. Specifications
GOST 9147-80: Laboratory porcelain ware and apparatus. Specifications
GOST 9284-75: Slides for micropreparations. Specifications
The Document is Referenced By:
GOST 10054-82: Water-resistant abrasive paper
GOST 10316-78: Foil coated paper-based laminate and glass-cloth-base laminate. Specifications
GOST 10851-94: Friction articles manufactured from retinax
GOST 11679.2-2019: Rubber-metal instrument dampers. Fittings. Technical specifications
GOST 11679.2-76: Rubber-metal shock-absorbers for instruments. Fitting. Specifications
GOST 11802-88: Jet fuel method of test for determination of thermal-oxidative stability under static condition
GOST 11968-78: Woodworking equipment. Drum santing machine. Standards of accuracy
GOST 1198-93: Asbestos brake bands
GOST 13087-81: Concretes. Method of abrasion test
GOST 13344-79: Waterproof abrasive cloth. Specifications
GOST 15130-86: Optical quartz glass
GOST 17323-71: Engine fuel. Determination of mercaptan and hydrogen sulphide sulphur content by pontentiometric titration
GOST 17367-71: Metals. Method of abrasion test by friction against embedded arrogant grain
GOST 18118-79: Abrasive tool. Hardness measurement by sand blasting
GOST 18375-73: Lubricating oil 132-08. Specifications
GOST 19199-73: Lubricating oils. Method for determination of anticorrosive properties
GOST 19202-80: Abrasive tool. Hardness measurement by ball indentation
GOST 19658-81: Monocrystalline silicon in ingots. Specifications
GOST 20457-75: Motor oils. Method of test for antioxidzing properties by installation ИКМ
GOST 20458-89: Grease Torsiol-55. Specifications
GOST 20502-75: Oils and additives to them. Methods for determination of corrodibility
GOST 21153.2-84: Rocks. Methods for determination of axial compression strength
GOST 21153.5-88: Rocks. Method for the determination of cut strength limit
GOST 21153.8-88: Rocks. Method for determination of triaxial compressive strength
GOST 21443-75: Liquefied hydrocarbon gases for export
GOST 21448-75: Alloyed powders for welding deposit. Specifications
GOST 21534-76: Petroleum The determination of chloride salts content
GOST 21963-2002: Grinding wheels for cutting-off. Specifications
GOST 21963-82: Cutoff wheels
GOST 22985-90: Liquefied hydrocarbon gases. Method for determination of hydrogen sulphide and mercaptan
GOST 23.207-79: Ensuring of wear resistance of products. Testing of engineering materials for impact abrasive wear
GOST 23.208-79: Ensuring of wear resistance of products. Wear resistance testing of materials by friction against loosely fixed abrasive particles
GOST 23.212-82: Products wear resistance assurance. The method of testing materials for wear under shock under law temperature conditions
GOST 23182-78: Grinding wheels for hand-held grinders
GOST 23663-79: Printed circuit boards. Mechanical surface stripping. Requirements for standard technological processes
GOST 23852-79: Coatings of lacquers and paints. General requirements for choice by decorative properties
GOST 2424-83: Grinding wheels
GOST 24392-80: Monocrystalline silicon and germanium. Measurement of the electrical resistivity by the four-probe method
GOST 2447-82: Mounted grinding wheels
GOST 2456-82: Grinding bars
GOST 2464-82: Grinding segments
GOST 24982-81: Sheets of corrosion-resistant, heat-resistant and high-temperature alloys
GOST 25593-83: Diamond pastes
GOST 26246.0-89: Foil-clad electrical insulating materials for manufacture of printed plates. Test methods
GOST 26327-84: Silicon carbide grinding materials
GOST 27180-2019: Ceramic tiles. Test methods
GOST 28302-89: Thermal sprayed protective coatings from zinc and aluminium metallic construction. General requirements for a typical technological process
GOST 28654-90: Abrasive grains from aluminium oxide. Test methods of chemical composition
GOST 28818-90: Grinding materials made of aluminum-oxide abrasive
GOST 28844-90: Thermal sprayed coatings strenghtive and reductive. General requirements
GOST 28924-91: Grinding materials. Test methods of physical and physical-mechanical properties
GOST 2917-76: Oils and additives. Method of test for corrosion influence on metals
GOST 30629-2011: Materials and products facing of rocks. Test methods
GOST 30629-99: Cladding materials and products made of natural stone. Test methods
GOST 31337-2006: Noise of machines. Hand-held non-electric power tools. Engineering method for the measurement of noise
GOST 31358-2019: Dry building floor mixes. Technical specifications
GOST 31537-2012: Wheelset assembly for locomotives and motor-powered units using shrink fit method. Typical technological process
GOST 31847-2012: Wheel sets for the special-purpose rolling stock. General specifications
GOST 32018-2012: Road-construction goods of natural stone. Specifications
GOST 32565-2013: Safety glass for ground vehicles. General specifications
GOST 33078-2014: Automobile roads of general use. Methods for measuring the adhesion of a coated car wheel
GOST 33534-2015: Bars and segments for grinding. Specification
GOST 344-85: Emery paper for testing the wearability of rubber
GOST 5009-82: Abrasive cloth. Specifications
GOST 5582-75: Corrosion-resistant, heat-proof, and heat-resistant thin-sheet rolled stock
GOST 5702-75: Process lubricant SP-3
GOST 5734-76: Greases method for the determination of oxidation stability
GOST 5744-85: Abrasive grains from boron carbide. Specifications
GOST 6037-75: Lubricating greases. Method for the determination of creeping tendency
GOST 6321-92: Engine fuels. Method for copper strip test
GOST 6456-82: Abrasive paper
GOST 6672-75: Cover glasses for micropreparations. Specifications
GOST 6918-81: Line screen grease strainers. Specifications
GOST 6943.10-2015: Textile glass materials. Method for determination of breaking load and elongation at break
GOST 6943.2-2015: Glass textile products. Methods for determination of filaments and fibre diameter
GOST 803-81: Hot-rolled strips of carbon high-grade steel for plating
GOST 8692-88: Fiber grinding wheels
GOST 9.080-77: Unified system of corrosion and ageing protection. Plastic greases. Accelerated method for determination of corrosion effect on metals
GOST 9.402-2004: Unified system of corrosion and ageing protection. Paint coatings. Metal surface preparation for painting
GOST 9.402-80: Metal surface preparation for painting
GOST 9144-79: Engine Fuels. Method for determination of thermal stability in static conditions
GOST 9566-74: Greases. Method for determination of evaporability
GOST R 12.4.188-2000: Occupational safety standards system. Filtering goggle against vaporous and gaseous toxic substances. Technical requirements and test methods
GOST R 50990-96: Respirators. Method of determination of dust penetrability coefficients
GOST R 51104-97: Exported liquefied hydrocarbon gases from Russian region. Specifications
GOST R 51967-2002: Grinding wheels for abrasive polishing. Specifications
GOST R 52161.2.2-2005: Safety of household and similar electrical appliances. Part 2.2. Particular requirements for vacuum cleaners and water-suction cleaning appliances
GOST R 52338-2005: Industrial cleanliness. Methods for lubricating and cooling liquids testing
GOST R 52381-2005: Abrasive materials. Grain and grain size distribution of grinding powders. Test of grain size distribution
GOST R 52587-2006: Abrasive tools. Designations and hardness test methods
GOST R 52710-2007: Abrasive tools. Acoustic method for determination of hardness and sound indices by reduced acoustic wave velocity
GOST R 52781-2007: Grinding and tool-grinding wheels. Specifications
GOST R 52927-2008: Rolled stock of normal, increased- and high-strength steel for shipbuilding. Specifications
GOST R 53734.4.5-2010: Electrostatics. Part 4-5. Standard test methods for specific applications. Methods for characterizing the electrostatic protection of footwear and flooring in combination with a person
GOST R 55877-2013: Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Test methods for determination of resistance to wear by abrasive wheels
GOST R 57744-2017: Ceramic composites. Determination of the interlaminar shear strength at ambient temperature by the compression of double-notched test pieces and by the Iosipescu test
GOST R 57778-2017: Polymer composites. Determination of in-plane shear properties by the rail shear method
GOST R 57858-2017: Polymer composites. Method for determination of fiber volume fraction and fiber distribution in polymer matrix
GOST R 57978-2017: Grinding wheels for cutting-off. Specifications
GOST R 58271-2018: Dry rubbing mixes. Technical conditions
GOST R 58860-2020: Endless sanding belts. Specifications
GOST R IEC 335-2-2-95: Safety of household and similar electrical appliances. Particular requirements for vacuum cleaners and water suction cleaning appliances and test methods
GOST R ISO 6313-93: Road vehicles. Brake linings. Effects of heat on dimensions and form of disc brake pads. Test procedure
GOST R ISO 6315-93: Road vehicles. Brake linings. Seizure to ferrous mating surface due to corrosions. Test procedure
Order 8-14/674: Rules of the organization and maintenance of technological process in cereal enterprises. Part 2
OST 2 MT71-5-84: Grinding materials from electrocorundum. Technical specifications
OST 2 MT71-5-84: Grinding materials from electrocorundum. Technical specifications
OST 26-3-87: Welding in chemical mechanical engineering. Main provisions.
OST 36-72-82: Steel building structures. Field connections on high-strength bolts. Typical technological process.
PI 1.2.315-89: Production of glazing parts from organic glasses
RD 153-34.0-21.601-98: Model Guidelines for Operation of Process Buildings and Structures of Electric Power Facilities. Part II, Sections 1, 2
RD 153-34.0-45.510-98: Model Guidelines for Operation and Repair of Slip Rings and Brushes of Turbine Generators with Power of 63 MW and Above
RD 24.200.04-90: Weld seams. Metallographic method of control of the base metal and welded joints of chemical oil equipment
RD 34.26.203: Guidelines for Brick Lining Work During Installation of Boiler Plants and Energy Facilities
RD 34.26.205: Requirements for Lining Refractory Walls of Boiler Fireboxes Using Silicon Carbide Ramming Masses
RD 34.39.601: Guide to Repair of Fittings for Piping Systems at Pressure of 64-100 kgf/sq. cm
RST RSFSR 605-89: Folding knives. General technical conditions
RTM 26-07-133-93: Pipeline fittings. Welding and a building-up of details from titanic alloys. Technical requirements and quality control.
RTM 38 40535-82: Gumming protective coatings
RU 1.2.1.14.001-2012: Guidance for the repair of concrete, reinforced concrete constructions and hydrotechnical constructions of nuclear power plant stations
ST TsKBA 045-2009: Pipe fittings. Welding and surfacing of parts made of titanium and titanium alloys. Technical requirements and quality control
ST TsKBA 089-2010: Pipe fittings. Welding defects castings. Technical requirements
TU 14-4-1731-92: Dowel-nails with zinc coated washers. Technical conditions
TU 2513-001-00152081-93: Glues 51-K-10V. Technical specifications
TU 38 0051166-98: Rubber compounds for the rubber products of aircraft
VSN 9-94: Flooring Guidelines for Residential and Public Buildings
Customers Who Viewed This Item Also Viewed:
 |
Jet fuels
Language: English |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Molded parts of coupler and automatic coupler devices of railway rolling stock. General specifications.
Language: English |
Main-line diesel locomotives. General technical requirements.
Language: English |
Four-wheel bogies of freight cars for mainline railways gauge 1520 (1524) mm. Specifications
Language: English |
Technical ethylcellosolve. Specifications
Language: English |
Automatic coupler model SA-3 and its components. Design and dimensions
Language: English |
Railway rolling stock. Devices to prevent running gear parts from dropping to the track. Methods of controlling strength characteristics
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Welded joints in steel structures of railway rolling stock. Requirements for design, implementation and quality control
Language: English |
Locomotives The method of dynamic strength tests
Language: English |
Railway rolling stock. Norms for permissible exposure of railway track and test methods
Language: English |
Locomotives. Requirements for strength and dynamic qualities
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.