GOST 8.461-2009

ГОСТ 8.461-2009

State system for ensuring the uniformity of measurements. Platinum, copper and nickel resistive temperature transducers. Verification methods

Государственная система обеспечения единства измерений. Термопреобразователи сопротивления из платины, меди и никеля. Методика поверки

Status: Effective

The standard applies to resistance thermocouples of platinum, copper and nickel (TC) according to GOST 6651, designed to measure temperatures from minus 200 ° C to plus 850 ° C or in parts of this range, as well as to circulating vehicles released prior to introduction into action of GOST 6651, and establishes a methodology for their primary and periodic verification. In accordance with the standard can also be verified sensitive elements of the vehicle, used as a means of measuring temperature.

Стандарт распространяется на термопреобразователи сопротивления из платины, меди и никеля (ТС) по ГОСТ 6651, предназначенные для измерения температуры от минус 200 °С до плюс 850 °С или в части данного диапазона, а также на находящиеся в обращении ТС, выпущенные до введения в действие ГОСТ 6651, и устанавливает методику их первичной и периодической поверок. В соответствии со стандартом могут быть поверены также чувствительные элементы ТС, используемые в качестве средств измерений температуры .

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 30

Approved: Federal Agency for Technical Regulation and Metrology, 12/15/2009

SKU: RUSS69939

Price: $192.06




The Product is Contained in the Following Classifiers:

PromExpert » SECTION II. METROLOGICAL » I Organizational and technical bases of metrological support » 2 Technical basics of metrological support » 2.3 Verification, calibration and testing of measuring instruments » 2.3.6 Thermophysical and temperature measurements »

ISO classifier » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.200 Thermodynamics and Temperature Measurements » 17.200.20 Temperature measuring instruments »

National standards » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.200 Thermodynamics and Temperature Measurements » 17.200.20 Temperature measuring instruments »

National Standards for KGS (State Standards Classification) » Latest edition » T General technical and organizational and methodological standards » T8 State measurement system » T88 Methods of verification and metrological certification »

National Standards for KGS (State Standards Classification) » Latest edition » T General technical and organizational and methodological standards » T8 State measurement system » T88 Methods of verification and metrological certification » T88.1 Measurement of geometric quantities »

National Standards for KGS (State Standards Classification) » Latest edition » T General technical and organizational and methodological standards » T8 State measurement system » T88 Methods of verification and metrological certification » T88.6 Instruments for determining composition, state and properties of substances »


As a Replacement Of:

GOST 8.461-82: State system for ensuring the uniformity of measurements. Resistive temperature transducers. Methods and means of calibration

The Document References:

GOST 1.0-92: State System for Standardization of Russian Federation. Basic principles

GOST 1.2-97: Interstate system for standardization. Interstate standards, rules and recommendations on interstate standardization. Procedure for development, taking over application, renovation and cancellation

GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements

GOST 6651-2009: State system for ensuring the uniformity of measurements. Platinum, copper, and nickel resistance resistive temperature transducers. General requirements and test methods

GOST 8.461-82: State system for ensuring the uniformity of measurements. Resistive temperature transducers. Methods and means of calibration

RMG 43-2001: State system for ensuring the uniformity of measurements. The use of

The Document is Referenced By:

GOST 6651-2009: State system for ensuring the uniformity of measurements. Platinum, copper, and nickel resistance resistive temperature transducers. General requirements and test methods

GOST R 53616-2009: Requirements for performance of chambers for industrial products environmental endurance tests. Certification methods of chambers (without load) for humidity endurance test chambers

GOST R 55001-2012: General requirements for performance of chambers for industrial products environments endurance tests. Certification methods for chambers (without load) for salt spray tests

MCKL.0243.MP: Instruction. State system for ensuring the uniformity of measurements. Systems for measuring the quantity and parameters of free petroleum gas in flare units of technological facilities for gathering and treating oil, PJSC SN-MNG. Verification method

MCKL.0282.MP: State system for ensuring the uniformity of measurements. Instruction. The system for measuring the quantity and quality indicators of oil from the Uzunskoye field of OAO Slavneft-Megionneftegaz. Verification method

MCKL.0283.MP: State system for ensuring the uniformity of measurements. Instruction. The system for measuring the quantity and quality of oil No. 557 of the Arigolskoye field of OAO Slavneft-Megionneftegaz. Verification method

MI 3592-17: Recommendation. State system for ensuring uniformity of measurements. Methods for determining the metrological characteristics of measuring instruments used in the field of atomic energy use

MP 1018-13-2019: Instruction. State system for ensuring the uniformity of measurements. Gas quantity and parameters measuring system "Gas metering unit of Yurkharovskoye oil and gas condensate field of LLC" NOVATEK-YURKHAROVNEFTEGAZ ".

MP 2411-0126-2016: 5600 Series resistance thermocouples manufactured by Fluke Corporation, USA. Verification Method

MP 2411-0126-2016: 5600 Series resistance thermocouples manufactured by Fluke Corporation, USA. Verification Method

MP NKGZh.411611.008: Thermal converters precision PT 0304-VT

MP NKGZh.411611.008: Thermal converters precision PT 0304-VT

NA.GNMC.0293-19 MP: Instruction. State system for ensuring the uniformity of measurements. The system for measuring the quantity and indicators of oil at the PSP "Komsomolsky", LLC "RN-Sakhalinmorneftegaz". Verification method

Customers Who Viewed This Item Also Viewed:

Pipeline valves. Leakage rates of valves
Language: English
Price: $173.25
Explosive atmospheres. Part 0. Equipment. General requirements
Language: English
Price: $1,118.41
Loads and actions
Language: English
Price: $495.00
The method of gas chromatographic determination of phenol and epichlorohydrin in model environments imitating food products
Language: English
Price: $444.92
Metal products from structural alloy steel. Specification
Language: English
Price: $371.25
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Vessels and apparatus. Norms and methods of strength calculation. Method of strength calculation of shells and heads according to weld misalignment, angular misalignment and shell nonroundness
Language: English
Price: $155.43
Vessels and apparatus. Norms and methods of strength calculation. Requirements for the form of submission of strength calculations performed on a computer
Language: English
Price: $99.00
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English
Price: $311.85
Security of Financial (banking) Operations. Information Protection of Financial Organizations. Basic Set of Organizational and Technical Measures
Language: English
Price: $843.90
Thermal-sensitive paper for printing devices. General specifications
Language: English
Price: $153.26
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English
Price: $178.20
Vessels and apparatus. Norms and methods of strength calculation. Calculation of cylindrical and conical shells, convex and flat bottoms and covers
Language: English
Price: $287.10
Vessels and apparatus. Norms and methods of strength calculation. Strengthening the holes in the shells and bottoms at internal and external pressures. Calculation of the strength of the shells and the bottoms with external static loads on the fitting
Language: English
Price: $227.70
Vessels and apparatus. Norms and methods of strength calculation. Calculation of the strength and tightness of flange connections
Language: English
Price: $227.70
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English
Price: $473.36
Seismic building design code
Language: English
Price: $594.00
Explosive atmospheres. Part 15. Equipment with type of protection
Language: English
Price: $890.46
Non-destructive testing. Optical methods. General requirements
Language: English
Price: $121.77
Hazard classification of chemical products. General requirements
Language: English
Price: $356.40

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!