GOST R 12.4.276-1-2012
ГОСТ Р 12.4.276-1-2012
|
|
Occupational safety standards system. Respiratory protective devices. Compressed air line supply breathing apparatus. Part 1. Apparatus with a full face mask. Technical requirements. Test methods. Marking
Система стандартов безопасности труда. Средства индив��дуальной защиты органов дыхания. Дыхательный аппарат с линией подачи сжатого воздуха. Часть 1. Аппараты с полной маской. Технические требования. Методы испытаний. Маркировка
Status: Effective - Introduced for the first time. IUS 5-2014
This standard applies to hose non-autonomous breathing apparatus with a compressed air supply line, with a full-face mask and a lung machine, an open circuit for protection of the respiratory organs and eyes of a person from the harmful effects of an unsuitable for breathing toxic and smoky gas environment during rescue operations in buildings and structures and production facilities for various purposes, as well as ships and vessels of various ministries and departments of the Russian Federation. This standard establishes general technical requirements, test methods and labeling requirements for apparatuses. This standard does not apply to the following special respiratory protective equipment: - firefighters; - military; - medical; - aviation; - for underwater work; - for mine-rescue underground work. This standard is suitable for certification purposes.
Настоящий стандарт распространяется на шланговые неавтономные дыхательные аппараты с линией подачи сжатого воздуха, с полнолицевой маской и легочным автоматом, открытым контуром для защиты органов дыхания и зрения человека от вредного воздействия непригодной для дыхания токсичной и задымленной газовой среды при аварийно-спасательных работах в зданиях, сооружениях и производственных объектах различного назначения, а также кораблях и судах различных министерств и ведомств Российской Федерации. Настоящий стандарт устанавливает общие технические требования, методы испытаний и требования к маркировке аппаратов. Настоящий стандарт не распространяется на следующие специальные средства индивидуальной защиты органов дыхания: - пожарные; - военные; - медицинские; - авиационные; - для подводных работ; - для горноспасательных подземных работ. Настоящий стандарт пригоден для целей сертификации
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
11/29/2012
SKU: RUSS69954
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
13 Environmental protection, protection of people from environmental exposure. Security »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
019/2011 TR CU. On safety of personal protective equipment »
Regulations and standards (to ТР ТС 019/2011) »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
II Industrial sanitation and occupational health »
8 Personal protective equipment »
8.2 Respiratory, hearing protection »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.340 Protective equipment »
13.340.30 Respiratory Protection Devices »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.340 Protective equipment »
13.340.30 Respiratory Protection Devices »
The Document References:
GOST 12.4.157-75: Occupational safety standards system. Industrial filtering gas masks and respirators. Nephelometric methods for determination of penetration coefficient of oil mist under the face part
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions
GOST 2.103-68: Unified system for design documentation. Stages of designing
GOST 24997-2004: Gauges for metric thread. Tolerances
GOST 6433.2-71: Solid electrical insulating materials. Methods for evaluation of electrical resistance at d. c. voltages
GOST 8762-75: Round threading diameter 40 mm for gas-mask with the gauges main dimensions and the tolerances
GOST R 12.4.186-2012: Occupational safety standards system. Respiratory individual protective devices. Closed-circuit breathing apparatus compressed air type. Technical requirements. Test methods. Marking. Simples selection rules
GOST R 12.4.189-99: Occupational safety standards system. Respiratory protective devices. Masks. General specifications
GOST R 12.4.214-99: Occupational safety standards system. Respiratory protective equipment. Thread for facepieces. Standard thread connection
GOST R 12.4.215-99: Occupational safety standards system. Respiratory protective devices. Thread for facepieces. Centre thread connection
GOST R 12.4.252-2009: Occupational safety standards system. Respiratory protective devices. Fresh air hose breathing apparatus. Requirements, testing, marking
GOST R 12.4.274-2012: Occupational safety standards system. Self-contained open-circuit compressed air breathing apparatus incorporating a hood for escape. Requirements, testing, marking
GOST R 15.201-2000: System of product development and launching into manufacture. Products of industrial and technical designation. Procedure of product development and launching into manufacture
GOST R 51652-2000: Rectified ethyl alcohol of food raw material. Specifications
GOST R 8.568-97: State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
PR 50.2.006-94: Procedure for calibration of measurement equipment
The Document is Referenced By:
Decision 30: On approval of the list of products in respect of which the customs declaration is accompanied by a document about the conformity assessment requirements of the technical regulations of the Customs Union "On safety of agricultural and forestry tractors and trailers to them" (TR TS 031/2012) (as amended on March 21, 2017)
Decision 30: On the list of international and regional (interstate) standards, and in their absence - national (state) standards, resulting in voluntary compliance with the requirements of technical regulations of the Customs Union "On Personal Protective Equipment Safety" (TR CU 019/2011), and the list of international and regional (interstate) standards, and in their absence - national (state) standards, containing rules and methods of research (tests) and measurements, including
GOST 34891.3-2022: Refrigeration and heat pump systems. Safety and environmental requirements. Part 3. Equipment layout and personnel protection
|
Customers Who Viewed This Item Also Viewed:
 |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
High strength rolled steel. General specification
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
