GOST R 55472-2013
ГОСТ Р 55472-2013
|
|
Gas distribution systems. Requirements for gas distribution networks. Part 0. General
Системы газораспределительные. Требования к сетям газораспределения. Часть 0. Общие положения
Status: Effective - Introduced for the first time till 09/01/2019. IUS 5-2014
This standard establishes general requirements for gas distribution networks transporting gas in accordance with GOST 5542. The requirements of this standard apply to gas distribution networks with pressure up to 1.2 MPa inclusive, including: - external gas pipelines; - technological devices located on external gas pipelines, including gas reduction and metering stations; - technical devices and facilities located on the external gas pipelines of gas distribution networks
Настоящий стандарт устанавливает общие требования к сетям газораспределения, транспортирующим газ по ГОСТ 5542. Требования настоящего стандарта распространяются на сети газораспределения давлением до 1,2 МПа включительно, в том числе: - наружные газопроводы; - технологические устройства, расположенные на наружных газопроводах, в том числе пункты редуцирования и учета газа; - технические устройства и сооружения, расположенные на наружных газопроводах сетей газораспределения
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
6/5/2013
SKU: RUSS70029
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
23 Hydraulic and pneumatic systems and components for general use. »
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Pipelines »
Welding regulations »
Metal structures »
Welding regulations »
Welding materials »
Welding regulations »
Certification »
Welding regulations »
Documentation »
Welding regulations »
Non-destructive control »
Welding regulations »
Assembly devices »
Welding regulations »
Welding work »
Dusting »
Welding regulations »
Main materials »
Steel, cast iron »
Welding regulations »
Main materials »
Polymers »
Welding regulations »
Welding materials »
Gases »
Standards for pipe fittings (TPA) »
3. Piping valves (TPA) standards for industries »
3.7 For construction and housing and communal services »
Standards for pipe fittings (TPA) »
3. Piping valves (TPA) standards for industries »
3.2 For gas industry »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.01 Pipelines and their components in general »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.01 Pipelines and their components in general »
The Document is Replaced With:
GOST R 55472-2019: Gas distribution systems. Gas distribution networks of natural gas. Part 0. General
The Document References:
Code 190-FZ: Town Planning Code of the Russian Federation
Federal Law 7-FZ: Environmental Protection
GOST 10007-80: Polytetrafluoroethylene. Specifications
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 12.1.003-83: Noise. General safety requirements
GOST 1215-79: Malleable iron castings
GOST 12815-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). Types. Connecting dimensions and dimensions of sealing surfaces
GOST 12816-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). General technical requirements
GOST 12817-80: Cast grey iron flanges for Pnom from 0,1 to 1,6 MPa (from 1 to 16 kgf/sq sm). Design and dimensions
GOST 12818-80: Cast malleable iron flanges for Pnom from 1,6 to 4,0 MPa (from 16 to 40 kgf/cm2). Design and dimensions
GOST 12819-80: Cast steel flanges for Pnom from 1,6 to 20,0 MPa (from 16 to 200 kgf/sq sm). Design and dimensions
GOST 12820-80: Steel plane welded flanges for Pnom from 0,1 to 2,5 MPa (from 1 to 25 kgf/cm2). Design and dimensions
GOST 12821-80: Steel butt-welded flanges for Pnom from 0,1 to 20,0 MPa (from 1 to 200 kgf/cm2). Design and dimensions
GOST 12822-80: Steel loose flanges with welded ring for Pnom from 0,1 to 2,5 MPa (from 1 to 25 kgf/sq sm). Design and dimensions
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15180-86: Flexible flat gaskets. Main parameters and dimensions
GOST 15527-2004: Pressure treated copper zinc alloys (brasses). Grades
GOST 1583-93: Aluminium casting alloys. Specifications
GOST 16350-80: Climate of the USSR. Regionalizing and statistical parameters of climatic factors for technical purposes
GOST 17375-2001: Carbon and low-alloy steel butt-welding fittings. Sharply curved bends type 3D (R=1,5 DN). Design
GOST 17376-2001: Carbon and low-alloy steel butt-welding fittings. Tees. Design
GOST 17378-2001: Carbon and low-alloy steel butt-welding fittings. Reducers. Design
GOST 17379-2001: Carbon and low-alloy steel butt-welding fittings. Elliptical caps. Design
GOST 17380-2001: Carbon and low-alloy steel butt-welding fittings. General specifications
GOST 17711-93: Cast copper-zink alloys (brass). Grades
GOST 19281-89: Rolled steel with increased strength. General specifications
GOST 21488-97: Pressed bars of aluminium and aluminium alloys. Specifications
GOST 22235-2010: Freight cars for 1520 mm gauge main line railways. General requirements for safety in loading-unloading and shunting operations
GOST 25100-2011: Soils. Classification
GOST 28394-89: Vermicular graphite iron for castings grades
GOST 30753-2001: Carbon and low-alloy steel butt-weldings fittings. Sharply curved bends type 2D (R=DN). Design
GOST 31294-2005: Direct-acting safety valves. General specifications
GOST 31458-2012: Steel pipes, tubes and pipe products. Inspection documents
GOST 34.003-90: Information technology. Set of standards for automated systems. Automated systems. Terms and definitions
GOST 34.201-89: Information technology. Set of standards for automated systems. Types, sets and indication of documents for automated systems making
GOST 34.601-90: Information technology. Set of standards for automated systems. Automated systems. Stages of development
GOST 34.602-89: Information technology. Set of standards for automated systems. Technical directions for automated system making
GOST 380-2005: Common quality carbon steel. Grades
GOST 4543-71: Structural alloyed steel
GOST 481-80: Compressed asbestos fibre sheets and gaskets from it. Specifications
GOST 5152-84: Gland Packing Specifications
GOST 5520-79: Carbon, low-alloy and alloy sheet steel for boilers and pressure vessels. Specifications
GOST 5542-87: Natural fuel gases for industrial and domestic use
GOST 613-79: Tin foundry bronzes. Grades
GOST 6527-68: Female ends with pipe cylindrical thread. Dimensions
GOST 7293-85: Cast iron with globular graphite for foundry
GOST 7338-90: Rubber and rubber-fabric sheets. Specifications
GOST 8295-73: Graphite of lubricants. Specifications
GOST 8969-75: Pipe steel connections with cylindrical thread for pipelines P=1,6 МPа. Adapter couplings. Basic dimensions
GOST 9.602-2005: Unified system of corrosion and ageing protection. Underground constructions. General requirements for corrosion protection
GOST ISO 9001-2011: Quality management systems. Requirements
GOST R 1.0-2012: Standardization in the Russian Federation. Basic provisions
GOST R 15.201-2000: System of product development and launching into manufacture. Products of industrial and technical designation. Procedure of product development and launching into manufacture
GOST R 21.1003-2009: System of design documents for construction. Registration and storage rules design documentation
GOST R 51872-2002: Executive geodetic documentation in construction. Performance rules
GOST R 52760-2007: Pipeline valves. Requirements for the marking and distinctive painting
GOST R 52779-2007: Polyethylene fittings for gas pipelines. General specifications
GOST R 53672-2009: Pipeline valves. General safety requirements
GOST R 53865-2010: Gas distribution systems. Terms and definitions
GOST R 54808-2011: Pipeline valves. Leakage rates of valves.
GOST R 54960-2012: Gas distribution systems. Block gas delivery stations. Cabinet gas delivery stations. General technical requirements
GOST R 54983-2012: Gas distribution systems. Natural gas distribution networks. General requirements for operation. Operational documentation
GOST R 55473-2013: Gas distribution systems. Requirements for gas distribution networks. Part 1. Polyethylene gas pipelines
GOST R 55474-2013: Gas distribution systems. Requirements for gas distribution networks. Part 2. Steel gas pipelines
GOST R 56019-2014: Gas distribution systems. Gas pressure regulating stations. Functional requirements
GOST R 8.596-2002: State system for ensuring the uniformity of measurement. Metrological assurance for measuring system. Main principles.
GOST R IEC 870-1-1-93: Telecontrol equipment and systems. Part 1. General considerations. Section One - General principles
GOST R ISO 14001-2007: Environmental management systems. Requirements with guidance for use
RD 11-02-2006: Requirements to the contents and as-built documentation for construction, reconstruction, major overhaul of capital construction facilities and the requirements applying to acts for the performed work, structures, utility network sections
RD 50-34.698-90: Methodological instructions. Information technology. Set of standards and guidelines for automated systems. Automated systems. Requirements for the content of documents.
Resolution 83: Rules for determining and providing technical conditions for connection of capital construction objects to engineering support networks
Resolution 87: The list of names of communication services included in the license for the implementation of activities in the field of rendering communication services
Resolution 87: Regulations on the composition of sections of design documentation and requirements for their content
SP 18.13330.2011: Master plans for industrial enterprises
SP 22.13330.2011: Buildings and structures foundations
SP 28.13330.2012: Corrosion protection of buildings structures. Updated living edition of SNiP 2.03.11-85
The Document is Referenced By:
GOST 33979-2016: Gas distribution systems. Management systems of gas distribution network
GOST R 55471-2013: Gas distribution systems. Management system of gas distribution network
GOST R 55473-2013: Gas distribution systems. Requirements for gas distribution networks. Part 1. Polyethylene gas pipelines
GOST R 55474-2013: Gas distribution systems. Requirements for gas distribution networks. Part 2. Steel gas pipelines
GOST R 56290-2014: Gas distribution systems. Requirements to gas distribution networks. Part 3. Renovation
GOST R 58094-2018: Gas distribution systems. Gas distribution networks. Service life assessment in design of outdoor steel gas pipelines
GOST R 58095.0-2018: Gas distribution systems. Requirements for gas consumption networks. Part 0. General
GOST R 58096-2018: Gas distribution systems. Requirements to gas distribution networks. Part 6. Gas pipelines, sanified flexible sleeve
Order 498: List of questions proposed in the qualification examination for certification of experts in the field of industrial safety
Customers Who Viewed This Item Also Viewed:
|
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.