GOST R ISO 12176-1-2011
ГОСТ Р ИСО 12176-1-2011
|
|
Plastics pipes and fittings. Equipment for fusion jointing polyethylene systems. Part 1. Butt fusion
Трубы и фитинги пластмассовые. Оборудование для сварки полиэтиленовых систем. Часть 1. Сварка нагретым инструментом встык
Status: Effective - Introduced for the first time. IUS 12-2012
This standard establishes the main characteristics and requirements for the operation of equipment for hot-butt-welding welding of polyethylene pipe systems using electric heating tools. For welding of pipes and fittings intended for gas transportation according to ISO 4437 and ISO 8085-2, or water transportation according to ISO 4427-2 and ISO 4427-3, equipment with manual and mechanical drive is used. Welding equipment is designed to operate in a temperature range of minus 10 degrees. C to plus 40 degrees. C. Use of equipment outside this range must be consistent between the user of the equipment and its supplier.
Настоящий стандарт устанавливает основные характеристики и требования к эксплуатации оборудования для сварки нагретым инструментом встык полиэтиленовых трубных систем с использованием электрических нагревательных инструментов. Для сварки труб и фитингов, предназначенных для транспортирования газа согласно ИСО 4437 и ИСО 8085-2, или транспортирования воды согласно ИСО 4427-2 и ИСО 4427-3, применяют оборудование с ручным и механическим приводом. Оборудование для сварки предназначено работать в температурном диапазоне от минус 10 град. С до плюс 40 град. С. Применение оборудования за пределами этого диапазона должно согласовываться между пользователем оборудования и его поставщиком
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/13/2011
SKU: RUSS70271
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
23 Hydraulic and pneumatic systems and components for general use. »
Construction (Max) »
Standards »
Other state standards used in construction »
75 Extraction and processing of oil, gas and related production »
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Pipelines »
Welding regulations »
welding equipment »
Welding regulations »
Welding staff »
Welding regulations »
Documentation »
Welding regulations »
Heat treatment »
Welding regulations »
Assembly devices »
Welding regulations »
Welding work »
Mechanized welding »
Welding regulations »
Welding work »
Automatic welding »
Welding regulations »
Welding work »
Dusting »
Welding regulations »
Main materials »
Polymers »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.20 Plastic pipes »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.20 Plastic pipes »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.45 Plastic fittings »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.45 Plastic fittings »
ISO classifier »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.200 Equipment for oil refining, oil products and natural gas »
National standards »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.200 Equipment for oil refining, oil products and natural gas »
ISO classifier »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.200 Equipment for oil refining, oil products and natural gas »
75.200.01 Transportation and storage in general »
National standards »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.200 Equipment for oil refining, oil products and natural gas »
75.200.01 Transportation and storage in general »
The Document is Replaced With:
GOST R ISO 12176-1-2021: Plastic pipes and fittings. Equipment for welding polyethylene systems. Part 1. Welding with a heated tool butt
The Document References:
Federal Law 184-FZ: About technical regulation
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 50838-2009: Polyethylene pipes for the supply of gaseous fuel. Specifications
GOST R 52779-2007: Polyethylene fittings for gas pipelines. General specifications
The Document is Referenced By:
GOST 10854-2015: Oil seeds. Methods for determination of weed, oil-producing and foreign matters
GOST 32740-2014: Foodstuffs of processed poultry eggs. Determination of lipid phosphorus content by colorimetric method
GOST 32916-2014: Milk and milk products. Determination of vitamin D mass fraction by high performance liquid chromatography method
GOST 33028-2014: Public roads. Rubble and gravel from rocks. Moisture determination
GOST 33030-2014: Public roads. Rubble and gravel from rocks. Fracture determination
GOST 33319-2015: Meat and meat products. Method for determination of moisture content
GOST 33600-2015: Milk and dairy products. Method for determination of the lactoferrin by high performance liquid chromatography
GOST 34119-2017: Meat and meat products. Method for the determination of polycyclic aromatic hydrocarbons by high performance liquid chromatography with mass spectrometric detection
GOST 34136-2017: Food products, food raw materials. Method for determination of the residual content of macrolides, lincosamides and pleuromutilins by high performance liquid chromatography-mass spectrometry
GOST 9717.3-2018: Copper. Method of spectral analysis by oxide standard specimens
GOST ISO 1167-4-2013: Thermoplastics pipes, fittings and assemblies for the conveyance of fluids. Determination of the resistance to internal pressure. Part 4. Preparation of assemblies
GOST R 55276-2012: Plastics pipes and fittings. Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems
GOST R 55473-2013: Gas distribution systems. Requirements for gas distribution networks. Part 1. Polyethylene gas pipelines
GOST R 55473-2019: Gas distribution systems. Gas distribution networks of natural gas. Part 1. Polyethylene gas pipelines
GOST R 58121.3-2018: Plastic pipings for the supply of gaseous fuels. Polyethylene (PE). Part 3. Fittings
GOST R ISO 11414-2014: Plastics pipes and fittings. Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion
MUK 4.1.3343-16: Measurement of residual content of glufosinate ammonium and its metabolite 3-methylphosphino-propionic acid in sunflower seeds and oil, seeds and rapeseed oil, pea seeds by high performance liquid chromatography with tandem mass spectrometry
PND F 14.1:2.141-98: Quantitative chemical analysis of water. Methods of measuring mass concentrations of fats in samples of natural and waste waters by gas chromatography
RD 52.24.535-2019: Mass fraction of cadmium, cobalt, lead and chromium in bottom sediments. Atomic absorption measurement method using microwave sample processing
RMD 40-20-2013 Sankt-Peterburg: Designing and installation pipelines for water supply and sewage systems in Saint-Petersburg
RMD 40-20-2016 Sankt-Peterburg: Installation of water supply and drainage networks in St. Petersburg
SP 399.1325800.2018: External water supply and sewage systems made of polymer materials. Rules for design and installation
|
Customers Who Viewed This Item Also Viewed:
 |
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
