GOST R 51321.5-2011
ГОСТ Р 51321.5-2011
|
|
Low-voltage switchgear and control gear assemblies. Part 5. Particular requirements for low-voltage assemblies for power distribution in public networks (distribution cabinets and boards)
Устройства комплектные низковольтные распределения и управления. Часть 5. Дополнительные требования к низковольтным комплектным устройствам, предназначенным для наружной установки в общедоступных местах (распределительным шкафам и щитам)
Status: Effective
This standard applies to switchboards and switchboards of substations for cable connection (ShRKP) and (ShRKP) intended for distribution of electricity in the networks of consumers and must comply with all the requirements of GOST R 51321.1, if not otherwise specified, as well as additional requirements contained in this standard. This standard formulates additional requirements for ShRKP and ShRKP as part of stationary complete devices, fully tested (PI NKU). They are used to distribute electricity in three-phase systems. This standard does not apply to open low-voltage complete devices GCC
Настоящий стандарт распространяется на распределительные щиты и распределительные шкафы подстанций для кабельного подсоединения (ЩРКП) и (ШРКП), предназначенные для распределения электроэнергии в сетях потребителей и должны соответствовать всем требованиям ГОСТ Р 51321.1, если далее не указано иное, а также дополнительным требованиям, содержащимся в настоящем стандарте. Настоящий стандарт формулирует дополнительные требования к ЩРКП и ШРКП в составе стационарных комплектных устройств, полностью испытанных (ПИ НКУ). Их применяют для распределения электроэнергии в трехфазных системах. Настоящий стандарт не распространяется на открытые низковольтные комплектные устройства НКУ
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/6/2011
SKU: RUSS70371
The Product is Contained in the Following Classifiers:
Evidence base (TR CU, Technical Regulation of the Customs Union) »
004/2011 TR CU. About safety of low voltage equipment »
Regulations and standards (to TR CU 004/2011) »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.10 Operation of electrical installations, electrical equipment and power tools »
ISO classifier »
29 ELECTRICAL ENGINEERING »
29.130 Switching and control equipment »
29.130.20 Low-voltage switching equipment and control equipment »
National standards »
29 ELECTRICAL ENGINEERING »
29.130 Switching and control equipment »
29.130.20 Low-voltage switching equipment and control equipment »
ISO classifier »
29 ELECTRICAL ENGINEERING »
29.240 Power transmission networks and distribution networks »
29.240.99 Equipment related to power and distribution networks »
National standards »
29 ELECTRICAL ENGINEERING »
29.240 Power transmission networks and distribution networks »
29.240.99 Equipment related to power and distribution networks »
National Standards for KGS (State Standards Classification) »
Latest edition »
E Power and electrical equipment »
E7 Electrical apparatus and fittings »
E71 Devices with voltage up to 1000 V »
National Standards for OKSTU »
ELECTRICAL EQUIPMENT AND MATERIALS »
Complete devices for voltages up to 1000 V »
As a Replacement Of:
GOST R 51321.5-99: Low-voltage switchgear and control gear assemblies. Part 5. Particular requirements for assemblies intended to be installed outdoors in public places. Cable distribution cabinets (CDCs) for power distribution in networks
The Document References:
GOST 14254-96: Degrees of protection provided by enclosures (IP Code)
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15543.1-89: Electrical articles. General requirements for environmental climatic aspects stability
GOST 17516-72: Electrical articles. Operating conditions as to environment mechanical aspects influence
GOST 23216-78: Electrotechnical products. Storage, transportation, temporary corrosion protection and packing. General requirements and test methods
GOST 28207-89: Basic environmental testing procedures. Part 2. Tests. Test Ka: Salt mist
GOST 28216-89: Basic environmental testing procedures. Part 2. Tests. Test Db and guidance: damp heat, cyclic (12 + 12 hour cycle)
GOST 9012-59: Metals. Method of Brinell hardness measurement
GOST R 12.4.026-2001: Occupational safety standards system. Safety colors, safety signs and signal marking. Purpose and rules of application. General technical requirements and characteristics. Test methods
GOST R 15.201-2000: System of product development and launching into manufacture. Products of industrial and technical designation. Procedure of product development and launching into manufacture
GOST R 50339.0-2003: Low-voltage fuses. Part 1. General requirements
GOST R 50462-2009: Basic and safety principles for man-machine interface, marking and identification. Identification of conductors by colours and alphanumerics.
GOST R 51321.1-2007: Low-voltage switchgear and control gear assemblies. Part 1. Type-tested and partially type-tested assemblies. General technical requirements and test methods
GOST R IEC 60238-99: Edison screw lampholders
The Document is Referenced By:
GOST 12.2.232-2012: Occupational safety standards system. Surface drilling equipment. Safety requirements
GOST 33322-2015: Railway rolling stock. Requirements for protection against electrical hazards
GOST R IEC 61969-3-2015: Mechanical structures for electronic equipment. Outdoor enclosures. Part 3. The environmental demands concern, testing and safety
|
Customers Who Viewed This Item Also Viewed:
 |
Liquids for aircrafts systems. Method for determination thermo oxidizing stability and corrosion activity
Language: English |
Plastics structured-wall pipes and their fittings for sewerage systems outside the buildings. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
