GOST R 54909-2012

ГОСТ Р 54909-2012

Metal products from alloyed steel and alloys for valves of internal combustion engines. Specifications

Металлопродукция из легированной стали и сплавов для клапанов двигателей внутреннего сгорания. Технические условия

Status: Effective - Introduced for the first time. IUS 1-2013

This standard applies to metal products from alloyed wrought steel and alloys, intended for the manufacture of valves for internal combustion engines: - rods; - wire; - rolled wire; - forgings. This standard does not apply to wear-resistant and corrosion-resistant steels that are used to protect the surfaces of the valve seat. In addition to the requirements of this standard apply the general technical conditions for the standard (1)

Настоящий стандарт распространяется на металлопродукцию из легированной деформируемой стали и сплавов, предназначенную для изготовления клапанов двигателей внутреннего сгорания: - прутки; - проволоку; - катанку; - поковки. Настоящий стандарт не распространяется на износостойкие и коррозионно-стойкие стали, которые применяют для защиты поверхностей седла клапана. В дополнение в требованиям настоящего стандарта применяют общие технические условия по стандарту (1)

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 6/1/2012

SKU: RUSS70403

Price: $410.00




The Product is Contained in the Following Classifiers:

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.13 Testing and control of products of engineering industry » 4.13.1 Machinery, equipment and components for general engineering applications » 4.13.1.2 Engines, turbines »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.12 Testing and control of products of metallurgical industry » 4.12.4 Iron and steel products »

ISO classifier » 27 ENERGY AND HEATING TECHNOLOGY » 27.020 Internal combustion engines »

National standards » 27 ENERGY AND HEATING TECHNOLOGY » 27.020 Internal combustion engines »

ISO classifier » 77 METALLURGY » 77.140 Iron and steel products » 77.140.10 Thermoablative steels »

National standards » 77 METALLURGY » 77.140 Iron and steel products » 77.140.10 Thermoablative steels »

ISO classifier » 77 METALLURGY » 77.140 Iron and steel products » 77.140.20 Stainless steels »

National standards » 77 METALLURGY » 77.140 Iron and steel products » 77.140.20 Stainless steels »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V3 Steel quality and high quality (quality stock) » V32 Rolled and shaped steel »


The Document References:

Federal Law 184-FZ: About technical regulation

GN 2.6.1.2159-07: Content of technogenic radionuclides in metals

GOST 10243-75: Steel. Methods of test and estimation of macrostructure

GOST 12344-2003: Alloyed and high-alloyed steels. Methods for determination of carbon

GOST 12345-2001: Alloyed and high-alloyed steels. Methods of sulphur determination

GOST 12346-78: Alloyed and high-alloyed steels. Methods of silicon determination

GOST 12347-77: Alloyed and high-alloyed steels. Methods for determination of phosphorus

GOST 12348-78: Alloyed and high-alloyed steels. Methods of manganese determination

GOST 12350-78: Alloyed and high-alloyed steels. Methods of chromium determination

GOST 12352-81: Steels alloyed and highalloyed. Methods for the determination of nickel

GOST 12354-81: Steels alloyed and highalloyed. Methods for the determination of molybdenum

GOST 12355-78: Alloyed and high-alloyed steels. Methods of copper determination

GOST 12356-81: Steels alloyed and highalloyed. Methods of the determination of titanium

GOST 12357-84: Steels alloyed and highalloyed. Methods for the, determination of aluminium

GOST 12361-2002: Alloyed and highalloyed steels. Methods for determination of niobium

GOST 12363-79: Steels alloyed and highalloyed. Methods for the determination of selenium

GOST 12364-84: Steels alloyed and highalloyed. Methods for the determination of cetium

GOST 14955-77: Quality round steel with a special surface finish

GOST 17745-90: Steels and alloys. Methods for determination of gases

GOST 18143-72: Corrosion resistant

GOST 18895-97: Steel. Method of photoelectric spectral analysis

GOST 25054-81: Forgings made of corrosion-resistant steels and alloys

GOST 2590-2006: Round hot-rolled steel bars. Dimensions

GOST 28033-89: Steel. Method of X-ray-fluorescent analysis

GOST 5582-75: Corrosion-resistant, heat-proof, and heat-resistant thin-sheet rolled stock

GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades

GOST 5949-75: Gauged corrosion-resistant, heat-resistant and high-temperature steel shape

GOST 7350-77: Plate, corrosion-resistant, heat-resistant, and high-temperature steel

GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition

GOST 7566-94: Metal products

GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions

GOST R 1.5-2004: Standardization in the Russian Federation. National standards of the Russian Federation. Rules of structure, drafting, presentation and indication

GOST R 53845-2010: Steel rolled products. General rules of sampling, rough specimens and test pieces selection for mechanical and technological testing

The Document is Referenced By:

GOST R 54908-2012: Heat-resistant steel metal products. Specifications

Customers Who Viewed This Item Also Viewed:

Petroleum for oil-processing plants. Specifications
Language: English
Price: $18.00
Industrial gas burners. General technical requirements
Language: English
Price: $152.00
Electrical articles. General requirement for environment mechanical stability
Language: English
Price: $28.00
Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
Power transformer on-load tap-changing devices. General specifications
Language: English
Price: $167.00
Conical pipe thread. Profile, basic dimensions and tolerances
Language: English
Price: $71.00
Glass and glass products. Visual faults. Terms and definitions
Language: English
Price: $158.00
Industrial gas burners. Test methods
Language: English
Price: $204.00
Glass and glass products. Inspection methods for geometric parameters and appearance
Language: English
Price: $110.00
Weldable deformed reinforcing rolled products of A500C and B500C classes for reinforcement of concrete constructions. Specifications
Language: English
Price: $112.00
Crude petroleum. General specifications
Language: English
Price: $58.00
Power transformers. Test methods of tap changing devices
Language: English
Price: $626.00
Unified system for design documentation. Stages of designing
Language: English
Price: $71.00
White sugar. Specifications
Language: English
Price: $279.00
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $215.00
Rolled of normal, increased - and high-strength steel for shipbuilding. Specifications
Language: English
Price: $1,639.74
Guidelines for the photometric determination of hydrogen sulfide in the air
Language: English
Price: $62.00
Tempered glass. Specifications.
Language: English
Price: $149.00
Glass with low emissivity hard coating. Specifications.
Language: English
Price: $212.00
Glass laminated. Specifications.
Language: English
Price: $231.00

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!