GOST 2999-75

ГОСТ 2999-75

Metals and alloys. Vickers hardness teat by diamond pyramid

Металлы и сплавы. Метод измерения твердости по Виккерсу

Status: Effective - Supersedes. The limitation of effectiveness has been lifted: Protocol No. 2-92 of the IGU dated 05.10.92 (IUS 2-1993)

The standard establishes a method for measuring Vickers hardness of ferrous and non-ferrous metals and alloys.

Стандарт устанавливает метод измерения твердости по Виккерсу черных и цветных металлов и сплавов

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 32

Approved: State Committee of Standards of the Council of Ministers of the USSR, 7/28/1975

SKU: RUSS70528

Price: $210.00

English keywords: mechanical testing of metals;



The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 77 Metallurgy »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 001/2011 TR TS. On safety of railway rolling stock » Regulations and standards (to TR CU 001/2011) »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 002/2011 TR TS. On safety of high-speed rail » Regulations and standards (to TR CU 002/2011) »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 003/2011 TR TS. On safety of railway infrastructure » Regulations and standards (for TR CU 003/2011) »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 2 Tests for external factors » 2.2 Testing of manufacturing products »

ISO classifier » 77 METALLURGY » 77.040 Metal Testing » 77.040.10 Mechanical testing of metals »

National standards » 77 METALLURGY » 77.040 Metal Testing » 77.040.10 Mechanical testing of metals »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V0 General rules and regulations on metallurgy » V09 Test methods. Packaging. Marking »

National Standards for OKSTU » CAST IRON, FERRO ALLOYS, STEEL » Control methods (testing, analysis, measurements) »

National Standards for OKSTU » FINISHED ROLLED STEELS (INCLUDING BILL FOR EXPORT) » Control methods (testing, analysis, measurements) »

National Standards for OKSTU » RAW MATERIALS OF NON-FERROUS METALS, NON-FERROUS METALS AND THEIR ALLOYS » Control methods (testing, analysis, measurements) »

National Standards for OKSTU » PRODUCTS OF ELECTRODE AND CARBIDE INDUSTRY. PRODUCTS FROM NON-FERROUS METALS » Control methods (testing, analysis, measurements) »


As a Replacement Of:

GOST 2999-59: Metals. Test methods. Measurement of hardness by a diamond pyramid (according to Vickers)

The Document References:

GOST 23677-79: Hardness meters for metals

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST 9031-75: Reference hardness standards

GOST 9377-81: Diamond indenters and hammers for metal and alloys hardness testing machines. Specifications

The Document is Referenced By:

DiOR 05: Methodology of diagnosing of technical condition and determining of residual life of process equipment of oil refineries and petrochemical plants

GOST 10092-2006: Cupro-nickel tubes for heat-exchange apparatus. Specifications

GOST 10092-75: Cupro-nickel tubes for heat-exchanging apparatus. Specifications

GOST 10411-74: Axles for diesel locomotives of narrow gauge railways. Technical requirements

GOST 10461-81: Shake-proof washers with teeth. General specifications

GOST 10778-83: Spatulos. Specifications

GOST 10884-81: Heat strengthened steel bars of periodical section for concrete reinforcement. Technical requirements

GOST 10884-94: Thermomechanically hardened steel bars for reinforced concrete constructions. Specifications

GOST 11529-2016: Polyvinylchloride materials for floors. Control methods

GOST 11529-86: PVC materials for floors. Methods of control

GOST 11648-75: Quick removable thrust washers. Specifications

GOST 11871-88: Slotted round nuts, product grade A. Specifications

GOST 11964-81: Fraction pig-iron and steel technical

GOST 12253-88: Clips for the ball-and-socket joints of line accessories and insulators

GOST 13585-68: Steel. The bead method for determining the allowed welding and building procedures.

GOST 14333-79: Rubber working mills. General specifications

GOST 1452-2011: Helical springs for trucks and draw-and-buffer gears of railway rolling stock. Specifications

GOST 14901-93: Moulds for the manufacture of industrial rubber articles

GOST 1535-2006: Copper rods. Specifications

GOST 1535-2016: Copper rods. Specifications

GOST 15835-2013: Beryllium bronze bars. Specifications

GOST 15835-70: Beryllium bronze bars. Specifications

GOST 17019-78: Fixing parts for pipelines and cables. Specifications

GOST 1759.4-87: Bolts, screws and studs. Mechanical properties and test methods

GOST 1759.5-87: Nuts. Mechanical properties and test methods

GOST 1789-2013: Beryllium bronze strips and tapes. Specifications

GOST 1789-70: Beryllium bronze strips and ribbons. Specifications

GOST 18661-73: Steel. Method for measurement of hardness by shock indentation

GOST 19126-2007: Medical metallic instruments. General specifications

GOST 19126-79: Metallic medical instruments

GOST 19853-74: Lubricating plugs. Specifications

GOST 20329-74: Cutting off saws for cutting thermosetting plastics and thermoplast. Specifications

GOST 2060-2006: Brass rods. Specifications

GOST 2060-73: Brass rods. Specifications

GOST 2060-90: Brass rods. Specifications

GOST 21238-93: Surgical instruments-non-cutting, articulated instruments-general requirements and test methods

GOST 21239-93: Instruments for surgery. Scissors. General requirements and test methods

GOST 21427.2-83: Cold-rolled isotropic electrical-sheet steel

GOST 21708-76: Brown coals, hard coals and anthracite. Method for determination of abrasive coefficient of ash

GOST 21708-96: Solid mineral fuel. Method for determination of ash abrasiveness coefficient

GOST 21996-76: Cold-rolled heat treated steel-cord belt

GOST 21997-76: Steel flattened strip of high strength

GOST 2208-2007: Brass foil, ribbons, strips, sheets and plates. Specifications

GOST 2284-79: Cold-rolled carbon structural steel strip

GOST 23.201-78: Products wear resistance assurance. Gas abrasive wear testing of materials and coatings with centrifugal accelerator

GOST 23.207-79: Ensuring of wear resistance of products. Testing of engineering materials for impact abrasive wear

GOST 23.208-79: Ensuring of wear resistance of products. Wear resistance testing of materials by friction against loosely fixed abrasive particles

GOST 23.212-82: Products wear resistance assurance. The method of testing materials for wear under shock under law temperature conditions

GOST 23.218-84: Ensuring of wear resistance of products. Determination of energy-consumption while plastic deformation of materials

GOST 23.224-86: Products wear resistance assurance. Re-established machine parts. Experimental evaluation of wear resistance ability

GOST 23249-78: End cutters for use on NC machine tools for machining parts of high-resistant steels, titanium and light alloys. Specifications

GOST 23677-79: Hardness meters for metals

GOST 23870-79: Weldability of steels. Test method for evaluation of fusion welding effect on parent metal

GOST 25172-82: Sintered hard metals. Method of determination of Vickers hardness

GOST 25556-82: Set screws. Mechanical properties and test methods

GOST 25698-83: Powder articles. Methods of determination of hardness

GOST 25698-98: Sintered metal materials, excluding hard metals. Determination of apparent hardness. Materials of essentially uniform section hardness

GOST 26007-83: Strength calculations and tests. Methods of mechanical testing of metals

GOST 26582-85: Food (manufacturing) industry machines and equipment

GOST 26634-91: Dental rotary instruments. Shanks

GOST 2679-73: Slitting and cut-off cutters

GOST 26862-86: Rins. General specifications

GOST 27310-87: Potato combines

GOST 27640-88: Engineering materials and lubricants. Experimental evaluation of coefficient of friction

GOST 27860-88: Machine parts. Measurement of wear

GOST 27953-88: Detonation coatings. General requirements

GOST 27962-88: Industrial equipment

GOST 28380-89: Solderless connections. Part 1. Solderless wrapped connections. General requirements, test methods and practical guidance

GOST 28426-90: Thermo diffusion strengthening and protection of metal products. General requirements for technological process

GOST 28844-90: Thermal sprayed coatings strenghtive and reductive. General requirements

GOST 28868-90: Non-ferrous metals and alloys. Hardness measurement by shock indentation method

GOST 29212-91: Plain bearings. Hardness testing of bearing metals. Compound materials

GOST 30415-96: Steel. Non-destructive testing of mechanical properties and microstructure of steel products by magnetic method

GOST 3057-90: Disk springs. Specifications

GOST 30803-2014: Transmission tooth gears of the traction railway stock. Specifications

GOST 30827-2002: Solid mineral fuel. Determination of abrasiveness

GOST 31.111.42-83: Parts and subunits of modular work tools for metal-cutting machines

GOST 31.211.42-93: Elements and assembly units of detachable fixtures for assembly and welding

GOST 31373-2008: Wheelsets of locomotives and motor-powered units. Strength calculations and tests

GOST 31443-2012: Steel pipes for crafts pipelines. Specifications

GOST 31569-2012: Corrosion-resistant (stainless) steel billets for cast dentures of orthopedic dentistry. General specifications

GOST 31570-2012: Nickel-base alloy billets for orthopedic dentistry. General specifications

GOST 31627-2012: Corrosion-resistant cobalt-base alloy billets for orthopedic stomatology. General specifications

GOST 32484.1-2013: High-strength structural bolting assemblies for preloading. General requirements

GOST 32598-2013: Tubes copper round for water and gas. Specifications

GOST 33189-2014: Transmission tooth gears of the traction railway stock. Scales of standards of macro- and microstructures

GOST 33200-2014: Axles for wheelsets of railway rolling stock. General specifications

GOST 33212-2014: Non-grain oriented electrical steel strip. Specifications

GOST 33368-2015: Oil and oil products trunk pipeline transportation. Filters. General technical specifications

GOST 33852-2016: Pipeline valves. Knife gate valves for trunk pipelines. General specifications

GOST 34029-2016: Pipeline accessories. Check fittings for main oil pipelines and oil product pipelines. General specifications

GOST 34468-2018: Pyatniki freight cars of 1520 mm gauge railways. General technical conditions

GOST 34473-2018: Pipe fittings. Cranes spherical steel all-welded for water thermal networks. General technical conditions

GOST 3449-84: Taps. Specifications

GOST 3608-78: Rings for ring spinning and ring doubling frames. Specifications

GOST 3722-2014: Rolling bearings. Steel balls. Specifications

GOST 3749-77: Checking 90° squares. Specifications

GOST 4.446-86: System of product-quality indices. Measuring means for linear and angular measurements in mechanical engineering. Nomenclature of indices

GOST 494-2014: Brass tubes. Specifications

GOST 494-90: Pipes of brass

GOST 617-2006: General-purpose copper and brass tubes of round section. Specifications

GOST 617-90: Copper tubes. Specifications

GOST 6996-66: Welded joints. Methods of mechanical properties determination

GOST 7063-72: T-slot cutters. Specifications

GOST 7370-2015: Railway frogs. Specifications

GOST 8.063-2012: State system for ensuring the uniformity of measurements. State verification schedule for means measuring of metals and alloys on Vickers scales hardness

GOST 8.335-2004: State system for ensuring the uniformity of measurements. Hardness standard blocks. Methods of verification

GOST 8.335-78: State system for ensuring the uniformity of measurements. Harness standard blocks. Methods and means of verification

GOST 8.398-80: State system for ensuring the uniformity of measurements. Hardness testing machines for metals and alloys. Methods and means of verification

GOST 882-75: Probes. Specification

GOST 9031-75: Reference hardness standards

GOST 9038-90: Gauge blocks. Specifications

GOST 9244-75: Inside callipers graduated in 0,001 and 0,002 mm. Specifications

GOST 9509-74: Scales and dosimeters. Knife-edges and bearings of steel. General requirements

GOST ISO 2702-2015: Heat-treated steel tapping screws. Mechanical properties

GOST ISO 3506-1-2014: Mechanical properties of fasteners made from corrosion-resistant stainless steel. Part 1. Bolts, screws and studs

GOST ISO 3506-2-2014: Mechanical properties of fasteners made from corrosion-resistant stainless steel. Part 2. Nuts

GOST ISO 3506-3-2014: Mechanical properties of fasteners made from corrosion-resistant stainless steel. Part 3. Setting screws and similar fasteners not under tensile stress

GOST ISO 3506-4-2014: Mechanical properties of fasteners made from corrosion-resistant stainless steel. Part 4. Self-tapping screws

GOST ISO 898-1-2014: Mechanical properties of fasteners made of carbon and alloyed steels. Part 1. Bolts, screws and studs with specified property classes with large and small thread pitch

GOST ISO 898-2-2015: Mechanical properties of fasteners made of carbon steel and alloy steel. Part 2. Nuts with specified property classes with coarse thread and fine pitch thread

GOST ISO 898-5-2014: Mechanical properties of fasteners made of carbon and alloyed steels. Part 5. Setting screws and similar threaded fasteners of established classes of hardness with large and small thread pitch

GOST R 50.04.02-2018: Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of testing. Qualification testing of heat treatment processes

GOST R 50.04.04-2018: Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of testing. Qualification testing for technologies of working procedures by pressure

GOST R 50271-92: Prevailing torque type steel hexagon nuts. Mechanical and performance properties

GOST R 50529-2015: Civilian and duty firearms, devices for industrial and special purposes. Safety requirements and test methods for safety

GOST R 50530-2015: Cartridges for civilian and duty firearms and for devices for industrial and special purposes. Safety requirements and test methods for safety

GOST R 50629-93: Special form radioactive material. General technical requirements and test methods

GOST R 51178-98: Clips for ball-socket couplings of line hardware and insulators. Specifications

GOST R 51381-99: Corrosion-resistant cobalt-base alloy billets for orthopaedic stomatology. General specifications

GOST R 51767-2001: Nickel-base alloy billets for orthopaedic dentistry. General specifications

GOST R 52318-2005: Round copper tubes for water and gas. Specifications

GOST R 52627-2006: Bolts, screws and studs. Mechanical properties and test methods

GOST R 52628-2006: Nuts. Mechanical properties and test methods

GOST R 53129-2008: Corrosion-resistant (stainless) steel billets for cast dentures of orthopaedic dentistry. General specifications

GOST R 53374-2009: Liquid - propellant rocket engines. General technical requirements for production and quality inspection during supply for use

GOST R 53443-2009: Motor vehicles. Piston pins of automobile engines. General technical requirements and methods of tests

GOST R 53444-2009: Motor vehicles. Crankshafts of engines. General technical requirements and methods of tests

GOST R 53580-2009: Steel pipes for crafts pipelines. Specifications

GOST R 53675-2009: National standard of the Russian Federation. Pumps for the trunk oil pipelines. General Requirements

GOST R 53676-2009: Filters for the trunk oil pipelines. General requirements

GOST R 54480-2011: Non-grain oriented electrical steel strip. Specifications

GOST R 54803-2011: High-pressure welded steel vessels. General technical requirements

GOST R 55020-2012: Pipeline valves. Knife gate valves for trunk pipelines. General specifications

GOST R 55738-2013: Studs and ceramic ferrules for stud welding

GOST R 55989-2014: Trunk gas pipelines. Design standard for pressure over 10 MPa. Principal requirements

GOST R 56143-2014: Destructive tests on welds in metallic materials. Cold cracking tests for weldments. Arc welding processes. Part 3. Externally loaded tests

GOST R 56403-2015: Trunk pipelines for oil and oil products transportation. Welded steel pipes. Specifications

GOST R 56685-2015: Trunk pipelines for oil and oil products transportation. Fittings for diameters from 530 to 1220 mm. General specifications

GOST R 57179-2016: Thermite welding of rails. The method of testing and quality control

GOST R 57910-2017: Materials for additive process. Control and tests methods

GOST R 58064-2018: Steel welded pipes for building structure. Technical specifications

GOST R 58177-2018: United power system and isolated power systems. Thermal power plants. Thermal-mechanical equipment of thermal power plants. Control of condition of metal. Norms and requirements

GOST R 58419-2019: Additive technology. Products made of titanium alloys made by selective electron beam fusion. General specifications

GOST R 58867-2020: Instrument rolling bearings. Methods for measuring the hardness of bearing parts

GOST R 8.977-2019: State system for ensuring the uniformity of measurements. Standard hardness measures. Verification Method

GOST R ISO 1562-2008: Dental casting gold alloys. Technical requirements. Test methods

GOST R ISO 2702-2009: Heat-treated steel tapping screws. Mechanical properties

GOST R ISO 2702-93: Heat-treated steel tapping screws. General specifications

GOST R ISO 3126-2007: Plastics piping systems. Plastics components of piping systems. Determination of dimensions

I 1.2.1.02.019.1121-2016: Determination of mechanical properties of metal of equipment of nuclear power plants by means of non-reference technique in terms of hardness characteristics. Instructions

Manual for SNiP III-18-75: A manual on quality control methods for welded joints of metal structures and pipelines performed in construction

NB ZhT TM 02-98: The safety standards for rail transport. Metal products for railway rolling stock. Standards of safety.

ODM 218.2.044-2014: Recommendations for the performance of instrument and instrumental measurements in assessing the technical condition of bridge structures on highways

OST 108.004.10-86: Quality control program of nuclear energetics products.

OST 108.030.124-85: Details and prefabricated units made of pearlitic steels for pipelines with environment pressure P>2.2 MPa (22 kg/cm2) in nuclear power plants. General Specifications.

OST 24.125.60-89: Details and prefabricated units of steam and hot water in thermal power plants. General Specifications.

OST 26.260.18-2004: Process modules for oil and gas industry. General technical specifications

OST 26-07-1419-76: Forgings, stampings and blanks of rolled metal for pipeline fittings.

OST 26-07-2040-81: Pipeline Fittings. Abbreviated life tests. The general requirements to development of techniques of abbreviated tests.

OST 3-1686-90: Billets made of structural steel for engineering. General Specifications.

OST 36-39-80: Steel technological pipelines made of carbon and alloy steels for pressure Ру up to 9.81 MPa (100 kgf / cm2). Shielded manual metal arc welding. Typical technological process.

OST 4.054.035-78: Spring elements from alloys of ferrous and non-ferrous metals. Heat treatment. Typical Processes

PB 03-164-97: Standards for Fabrication of Steam and Hot-Water Boilers, Pressure Vessels, and Steam and Hot Water Piping by Welding

R 4.054.004-89: Details from alloys of ferrous and non-ferrous metals. Thermal and chemical-thermal treatment. Typical Processes

RD 03-380-00: Guidelines for Inspection of Spherical Tanks and Gas Holders for Storage of Liquefied Gases Under Pressure

RD 03-410-01: Instructions on the procedure of comprehensive engineering certification of cryogenic tanks for liquefied gases

RD 102-002-88: Machines, tools and equipment for pipeline construction. Designing and manufacturing.

RD 22-16-2005*: Guiding regulatory material. Hoisting machines. Selection of materials for the manufacture, repair and reconstruction of welded steel structures

RD 26.260.16-2002: Expert technical diagnostics of vessels and equipment operating under pressure at gas and gas condensate and oil production and processing facilities in the northern regions of the Russian Federation and underground gas storage facilities

RD 26-11-08-86: Welded Joints. Mechanical Tests

RD 26-17-086-88: Weld joints. Quality control of heat treatment equipment

RD 34.17.427-89: Procedural Guidelines. Nondestructive Testing at Thermal Power Stations. General Requirements

RD 50-187-80: Guidelines. Reliability in technology. Hardening of steel products by chemical and heat treatment. Diffusion chrome plating

RD 50-412-83: Reliability in technics. Machine parts hardening. Selecting of aluminizing durability modes. General requirements

RD 50-460-84: Guidelines. Ensuring the durability of products. Method for experimental evaluation of plasticity of the surface layers of machine parts

RD EO 0027-2005: Instructions for determining the mechanical properties of metal of equipment of nuclear power plants using gumless methods according to hardness characteristics

RD EO 1.1.2.99.0867-2012: Methods for assessing the technical condition and residual life of building structures of nuclear power plants

Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope

SDA 24-2008: Rules for assessment (certification) of testing laboratories personnel

ST CKBA 125-2020: Pipe fittings. Types of control and testing

ST TsKBA 010-2004: Pipe fittings. Forgings, stampings and rolled products. Technical requirements

ST TsKBA 015-2005: Pipe fittings. The program of quality control of fittings of nuclear power plants

ST TsKBA 088-2010: Pipe fittings. The quality control program of valves used for hydrogen sulfide environments

ST TsKBA 091-2011: Pipe fittings. Determination of mechanical properties of steel based on hardness measurement

TU 1381-003-47966425-2006: Steel electric-welded steel pipes with an outer diameter of 610 - 1420 mm for gas pipelines for operating pressures up to 9.8 MPa

TU 14-3R-1128-2007: Seamless cold-resistant steel pipes for gas pipelines of gas-lift systems for oil production and gas field equipment. Technical conditions

TU 2-034-228-87: Threaded and Radius Patterns

VSN 169-80: Guidelines for Using Manual and Automated Welding in Shop-Fabrication of Structural Steel Components for Bridges

VSN 39-87: Ordinance for Planned Preventive Maintenance and Operation of Production Equipment at Construction Industry Companies Administered by the USSR Gosagprom. Part 1

Customers Who Viewed This Item Also Viewed:

Man-machine system. Operator's arm-chair. General ergonomic requirements
Language: English
Price: $73.00
Traction railway stock wheelsets of 1520 mm gauge railways. General specifications
Language: English
Price: $137.00
Safety of machinery. Guards. General requirements for the design and construction of fixed and movable guards
Language: English
Price: $332.00
Safety of machinery. Interlocking devices associated with guards. Principles for design and selection
Language: English
Price: $436.00
Seismic building design code
Language: English
Price: $594.00
Conformity assessment. The procedure for conducting inspection control in certification procedures
Language: English
Price: $491.82

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!