GOST 31438.2-2011
ГОСТ 31438.2-2011
|
|
Explosive atmospheres. Explosion protection and prevention. Part 2. Basic concepts and methodology (for mining)
Взрывоопасные среды. Взрывозащита и предотвращение взрыва. Часть 2. Основополагающая концепция и методология (для подземных выработок)
Status: Effective - Introduced for the first time. IUS 3-2013
The standard establishes a fundamental concept and methodology for explosion protection and explosion prevention in underground workings by applying basic explosion protection methods in the design and manufacture of equipment, protection systems and components. The standard applies to equipment of Group I, intended for use in underground mines and their ground structures, hazardous mine gas and
Стандарт устанавливает основополагающую концепцию и методологию взрывозащиты и предотвращения взрыва в подземных выработках путем применения основных методов взрывозащиты при разработке и изготовлении оборудования, систем защиты и компонентов. Стандарт распространяется на оборудование Группы I, предназначенное для применения в подземных выработках шахт и их наземных строениях, опасных по рудничному газу и/или горючей пыли
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/22/2011
SKU: RUSS70536
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
13 Environmental protection, protection of people from environmental exposure. Security »
Construction (Max) »
Standards »
Other state standards used in construction »
29 Electrical Engineering »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
012/2011 TR CU. On safety equipment for work in explosive environments »
Regulations and standards (to TR CU 012/2011) »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
IV Fire safety »
1 Organizational and technical measures for ensuring fire safety »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.230 Explosion protection »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.230 Explosion protection »
ISO classifier »
29 ELECTRICAL ENGINEERING »
29.260 Electrical equipment for working in special conditions »
29.260.20 Electrical equipment for an explosive atmosphere »
National standards »
29 ELECTRICAL ENGINEERING »
29.260 Electrical equipment for working in special conditions »
29.260.20 Electrical equipment for an explosive atmosphere »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T5 Documentation System »
T58 System of standards infield of nature conservation and improvement of use of natural resources, labor safety, scientific organization of labor »
The Document References:
GOST 31438.1-2011: Explosive atmospheres.Explosion prevention and protection. Part 1. Basic concerpts and methodology
GOST 31441.1-2011: Non-electrical equipment for potentially explosive atmospheres. Part 1. General requirements
GOST 31442-2011: Group I, equipment protection level Ma intended to remain functional in atmosphere endangered by firedamp and/or coal dust
GOST 31610.5-2012: Electrical apparatus for explosive gas atmospheres. Part 5. Powder filling «q»
GOST 31610.7-2012: Electrical apparatus for explosive gas atmospheres. Part 7. Increased safety «e»
GOST IEC 60079-1-2011: Explosive atmospheres. Part 1. Equipment protection by flameproof enclosures 'd'
GOST IEC 60079-18-2011: Explosive atmospheres. Part 18. Equipment protection by encapsulation 'm'
GOST R 52350.29.1-2010: Explosive atmospheres. Part 29-1. Gas detectors. General technical requirements and test methods for the detectors for flammable gases
GOST R IEC 61508-1-2007: Functional safety of electrical, electronic, programmable electronic safety-related systems. Part 1. General requirements
GOST R IEC 61508-2-2007: Functional safety of electrical, electronic, programmable electronic safety-related systems. Part 2. Requirements for systems
GOST R IEC 61508-3-2007: Functional safety of electrical, electronic, programmable electronic safety-related systems. Part 3. Software requirements
GOST R IEC 61508-4-2007: Functional safety of electrical, electronic, programmable electronic safety-related systems. Part 4. Terms and definitions
GOST R IEC 61508-5-2007: Functional safety of electrical, electronic, programmable electronic safety-related systems. Part 5. Guidelines for methods of the determination of safety integrity levels
GOST R IEC 61508-6-2007: Functional safety of electrical, electronic, programmable electronic safety-related systems. Part 6. Guidelines on the application of GOST R IEC 61508-2-2007 and GOST R IEC 61508-3-2007
GOST R IEC 61508-7-2007: Functional safety of electrical, electronic, programmable electronic safety-related systems. Part 7. Techniques and measures
GOST R ISO 13849-1-2003: Safety of machinery. Safety-related parts of control systems. Part 1. General principles for design
The Document is Referenced By:
GOST 31438.1-2011: Explosive atmospheres.Explosion prevention and protection. Part 1. Basic concerpts and methodology
GOST 31439-2011: Equipment and components intended for use in potentially explosive atmospheres in underground mines
GOST 31440.1-2011: Reciprocating internal combustion engines. Safety requirements for design and construction of engines for use in potentially explosive atmospheres. Part 1. Group II engines for use in flammable gas and vapour atmospheres
GOST 31440.2-2011: Reciprocating internal combustion engines. Safety requirements for design and construction of engines for use in potentially explosive atmospheres. Part 2. Group I engines for use in underground workings susceptible to fired amp and/or combustible dust
GOST 31440.3-2011: Reciprocating internal combustion engines. Safety requirements for design and construction of engines for use in potentially explosive atmospheres. Part 3. Group III engines for use in flammable dust atmospheres
GOST 31441.1-2011: Non-electrical equipment for potentially explosive atmospheres. Part 1. General requirements
GOST 31441.3-2011: Non-electrical equipment for potentially explosive atmospheres. Part 3. Protection by flameproof enclosure «d»
GOST 31441.5-2011: Non-electrical equipment for potentially explosive atmospheres. Part 5. Protection by constructional safety «c»
GOST 31441.6-2011: Non-electrical equipment for use in potentially explosive atmospheres. Part 6. Protection by control of ignition source «b»
GOST 31441.8-2011: Non-electrical equipment for use in potentially explosive atmospheres. Part 8. Protection by liquid immersion «k»
GOST R 55153-2012: The mountain-mine equipment. Underground loading-transport machines. The safety requisitions and test methods
GOST R 55159-2012: The mountain-mine equipment. Underground loading machines. General technical requirements and test methods
GOST R 55163-2012: Mining equipment. Underground self-propelled cars. Safety requirements and test methods
GOST R 55728-2013: Mining equipment. Underground hydromonitors. Safety requirements and test methods
GOST R 55737-2013: Mining equipment. Mine electric locomotive transport. Accumulator electric locomotives. General technical requirements and test methods
GOST R 55816-2013: Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres
GOST R 57717-2017: Safety in coal mines. Terms and definitions
GOST R 57736-2017: Mining equpment. Mine auxiliary fans. General specifications
GOST R 58494-2019: Mining equipment. Multifunctional coal mine safety systems. Remote control system for hazardous production facilities
GOST R 58584-2019: Mining engineering. Switch points in self-rescuers. Safety requirements. Test methods
GOST R 58652-2019: Mining equipment. Multifunctional coal mine safety systems. Industrial Safety Principles
GOST R 70297-2022: Mining equipment. Turbines. General technical requirements and test methods
PNST 368-2019: Mining engineering. Explosion proof. General requirements
PNST 369-2019: Mining engineering. Mining Explosion Systems. General technical requirements
|
Customers Who Viewed This Item Also Viewed:
 |
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
