imgalt

GOST 530-2012

ГОСТ 530-2012

Ceramic brick and stone. General specifications

Кирпич и камень керамические. Общие технические условия

Status: Effective

This standard applies to brick and stone, ceramic (hereinafter - products) used for laying and facing bearing, self-supporting and non-bearing walls and other elements of buildings and structures, as well as clinker brick used for laying foundations, arches, walls subjected to heavy loads, and brick for external laying of chimneys, industrial and household stoves

Настоящий стандарт распространяется на кирпич и камень керамические (далее - изделия), применяемые для кладки и облицовки несущих, самонесущих и ненесущих стен и других элементов зданий и сооружений, а также клинкерный кирпич, применяемый для кладки фундаментов, сводов, стен, подверженных большой нагрузке, и кирпич для наружной кладки дымовых труб, промышленных и бытовых печей

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 12/27/2012

SKU: RUSS70543

Price: $247.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Documents System of normative documents in construction » 6. Regulatory documents for building materials and products » к.60 Wall masonry materials »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.11 Testing and control of glass and ceramic products » 4.11.2 Non-refractory ceramic products »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.100 Building Materials » 91.100.15 Mineral materials and products »

National standards » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.100 Building Materials » 91.100.15 Mineral materials and products »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.100 Building Materials » 91.100.25 Ceramic products for construction »

National standards » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.100 Building Materials » 91.100.25 Ceramic products for construction »


As a Replacement Of:

GOST 530-2007: Ceramic bricks and stones. General specifications

The Document References:

GOST 1.0-92: State System for Standardization of Russian Federation. Basic principles

GOST 1.2-2009: Interstate system for standardization. Interstate standards, rules and recommendations on interstate standardization. Rules for development, taking over, application, renovation and cancellation

GOST 14192-96: Cargo marking

GOST 166-89: Vernier callipers. Specifications

GOST 18343-80: Pallets for bricks and hollow clay tiles

GOST 25706-83: Magnifiers

GOST 26254-84: Buildings and structures. Methods of determination of thermal resistance of enclosing structures

GOST 30108-94: Building materials and elements. Determination of specific activity of natural radioactive nuclei

GOST 30244-94: Building materials. Methods for combustibility test

GOST 3749-77: Checking 90° squares. Specifications

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 473.1-81: Chemically resistant and heat resistant ceramic wares. The method for determination of acid resistance

GOST 530-2007: Ceramic bricks and stones. General specifications

GOST 7025-91: Ceramic and calcium silicate bricks and stones. Methods for water absorption and density determination and frost resistance control

GOST 8462-85: Wall materials. Methods for determination of ultimate compressive and bending strength

The Document is Referenced By:

GOST 33126-2014: Expanded clay concrete blocs. Specifications

GOST 34518-2019: Industrial furnaces and thermal units. Rules for the organization and production of work, monitoring of performance and requirements for the results of work

GOST 34519-2019: Industrial chimney and ventilation pipes. Rules for the organization and production of work, monitoring of performance and requirements for the results of work

GOST 379-2015: Silicate bricks, stones, blocks and partition blocks. General specifications

GOST R 55338-2012: Masonry and masonry products. Methods for determining estimates of the thermal protection

GOST R 55567-2013: The order of the organization and conducting technical engineering studies on researches on objects of cultural heritage. Monuments of history and culture. General requirements

GOST R 55646-2013: Resource saving. Production of ceramic bricks and stones. Guidance on implementing of best available techniques for improving energy efficiency and environmental performance

GOST R 56591-2015: Expanded claydite-plaster blocks. Specifications

GOST R 56828.21-2017: Best available techniques. Production of ceramic bricks and stones. Aspects for improving energy and environmental efficiency

GOST R 57333-2016: Wall blocks made of concrete on the dense and porous fillers. Specifications

GOST R 57334-2016: Autoclaved aerated concrete masonry units. Specifications

GOST R 57335-2016: Manufactured stone masonry units. Specifications

GOST R 57337-2016: Mortars for masonry. Specifications

GOST R 57346-2016: Lintes for masonry. Specifications

GOST R 57347-2016: Ceramic bricks. Specifications

GOST R 57348-2016: Calcium silicate masonry units and blocks. Specifications

GOST R 57349-2016: Bricks and blocks. Compressive strength determination method

GOST R 57842-2017: Masonry from large-format ceramic stones. Methods for determining thermal properties, sound insulation and air-tightness

GOST R 58026-2017: Masonry units. Methods of test. Determination of net and gross dry density of masonry units (except for natural stone)

GOST R 58272-2018: Dry building masonry mixes. Technical conditions

GOST R 58360-2019: Dish-shaped anchors for fastening a heat-insulating layer in facade heat-insulating composite systems with external plaster layers. Test methods

GOST R 58527-2019: Wall materials. Methods for determining compressive and bending strengths

ITS 4-2015: Manufacture of ceramic ware

R 78.36.035-2013: Recommendations for the organization of a comprehensive centralized protection of banking self-service devices

RMD 51-25-2018 St. Petersburg: Recommendations for the design, installation and operation of facade systems for new construction, reconstruction and repair of residential and public buildings in St. Petersburg. Part II Recommendations for the operation and repair of facade systems for new construction and reconstruction of residential and public buildings in St. Petersburg

SP 15.13330.2012: Masonry and reinforced masonry structures

SP 247.1325800.2016: Penal system. Pretrial detention facilities. Design rules

SP 27.13330.2017: Concrete and reinforced concrete structures intended for the service in elevated and high temperatures

SP 308.1325800.2017: Correctional institutions and centers of criminaly-executive system. Design rules

SP 327.1325800.2017: Exterior masonry walls with brick veneer. Rules of design, operation and repair

SP 343.1325800.2017: Constructions of the industrial enterprises. The rules of operation

SP 375.1325800.2017: Industrial chimneys. Design rules

SP 375.1325800.2023: Industrial flue pipes. Design rules

SP 43.13330.2012: Structures for industrial installations

SP 434.1325800.2018: Polystyrene concrete enclosures. Design rules

SP 469.1325800.2019: The construction of livestock, poultry and animal husbandry enterprises. Terms of Use

SP 507.1325800.2021: Buildings and premises of weapons, ammunition and special means for the needs of the penal system. Design Rules

SP 509.1325800.2021: Prisons. Design rules

SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87

SP 83.13330.2016: Industrial furnaces and brick chimneys

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English
Price: $745.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English
Price: $349.00
imgalt
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $549.00
imgalt
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English
Price: $414.00
imgalt
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English
Price: $700.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!