GOST 8536-79

ГОСТ 8536-79

Blanks for marine shafts and rudder stocks. Specifications

Заготовки судовых валов и баллеров рулей. Технические условия

Status: Effective - Supersedes. The limitation of effectiveness has been lifted: Protocol No. 5-94 of the IGU dated 05.17.94 (IUS 11-12-1994)

The standard applies to workpieces: - ship shafts (rowing, stern, intermediate, resistant); - drive shafts and rotor shafts of propellers (CD); - rulers and pins of rudders, stabilizers of pitching and swivel tips; - bullets and shafts thrusters, turntables and various devices with propellers as a working body; - shafts, rods and cylinders of the mechanism for changing the pitch of propellers adjustable pitch (CPP); - removable couplings for connection of the specified shafts and rulers; - for ships, ships and boats.

Стандарт распространяется на заготовки: - судовых валов (гребных, дейдвудных, промежуточных, упорных); - ведущих валов и валов ротора крыльчатых движителей (КД); - баллеров и штырей рулей, успокоителей качки и поворотных насадок; - баллеров и валов подруливающих устройств, поворотных колонок и различных устройств с движителями в качестве рабочего органа; - валов, штанг и цилиндров механизма изменения шага гребных винтов регулируемого шага (ВРШ); - съемных муфт для соединения указанных валов и баллеров; - для судов, кораблей и плавсредств.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: USSR State Committee for Standards, 2/26/1979

SKU: RUSS70551

Price: $216.00




The Product is Contained in the Following Classifiers:

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.14 Testing and monitoring of vehicles and equipment » 4.14.2 Ships and ship equipment »

ISO classifier » 47 SHIPBUILDING AND MARINE STRUCTURES » 47.020 Shipbuilding and marine structures in general » 47.020.20 Marine engines and propulsion systems »

National standards » 47 SHIPBUILDING AND MARINE STRUCTURES » 47.020 Shipbuilding and marine structures in general » 47.020.20 Marine engines and propulsion systems »

National Standards for KGS (State Standards Classification) » Latest edition » D Vehicles and packaging » D4 Shipbuilding (water transport) » D44 Ship Mechanisms and Boilers »

National Standards for OKSTU » CAST IRON, FERRO ALLOYS, STEEL » Billet from roll, pipes from ingots and forgings from ingots »

National Standards for OKSTU » FINISHED ROLLED STEELS (INCLUDING BILL FOR EXPORT) » Commodity blank »


As a Replacement Of:

GOST 8536-68: Blanks for marine shafts and rudder stocks. Technical requirements

The Document References:

GOST 10243-75: Steel. Methods of test and estimation of macrostructure

GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications

GOST 12344-2003: Alloyed and high-alloyed steels. Methods for determination of carbon

GOST 12344-78: Alloyed and high-alloyed steels. Methods for determination of carbon

GOST 12345-2001: Alloyed and high-alloyed steels. Methods of sulphur determination

GOST 12346-78: Alloyed and high-alloyed steels. Methods of silicon determination

GOST 12347-77: Alloyed and high-alloyed steels. Methods for determination of phosphorus

GOST 12348-78: Alloyed and high-alloyed steels. Methods of manganese determination

GOST 12349-83: Alloyed and high-alloyed steels. Methods for determination of tungsten

GOST 12350-78: Alloyed and high-alloyed steels. Methods of chromium determination

GOST 12351-81: Steels alloyed and highalloyed. Methods for the determination of vanadium

GOST 12352-81: Steels alloyed and highalloyed. Methods for the determination of nickel

GOST 12353-78: Alloyed and high-alloyed steels. Methods of cobalt determination

GOST 12354-81: Steels alloyed and highalloyed. Methods for the determination of molybdenum

GOST 12355-78: Alloyed and high-alloyed steels. Methods of copper determination

GOST 12356-81: Steels alloyed and highalloyed. Methods of the determination of titanium

GOST 12357-84: Steels alloyed and highalloyed. Methods for the, determination of aluminium

GOST 12358-2002: Alloyed and highalloyed steels. Methods for determination of arsenic

GOST 12359-99: Carbon, alloyed and high-alloyed steels. Methods for determination of nitrogen

GOST 12360-82: Steels alloyed and highalloyed. Methods for the determination of boron

GOST 12361-2002: Alloyed and highalloyed steels. Methods for determination of niobium

GOST 12362-79: Alloy and high-alloy steels. Methods for determination of stibium, lead, tin, zinc and cadmium

GOST 12363-79: Steels alloyed and highalloyed. Methods for the determination of selenium

GOST 12364-84: Steels alloyed and highalloyed. Methods for the determination of cetium

GOST 12365-84: Steels alloyed and highalloyed. Methods for the determination of zirconium

GOST 14019-2003: Metallic materials. Bend test method

GOST 14019-80: Metals. Methods of bend tests

GOST 1497-84: Metals. Methods of tension test

GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis

GOST 22536.10-88: Carbon steel and unalloyed cast iron. Methods for determination of alluminium

GOST 22536.11-87: Carbon steel and unalloyed cast iron. Methods for determination of titanium

GOST 22536.12-88: Carbon steel and unalloyed cast iron. Methods for determination of vanadium

GOST 22536.1-88: Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite

GOST 22536.2-87: Carbon steel and unalloyed cast iron. Methods for the determination of sulfur

GOST 22536.3-88: Carbon steel and unalloyed cast iron. Methods for determination of phosphorus

GOST 22536.4-88: Carbon steel and unalloyed cast iron. Methods for determination of silicon

GOST 22536.5-87: Carbon steel and unalloyed cast iron. Methods for determination of manganese

GOST 22536.6-88: Carbon steel and unalloyed cast iron. Methods for determination of arsenic

GOST 22536.7-88: Carbon steel and unalloyed cast iron. Methods for determination of chromium

GOST 22536.8-87: Carbon steel and unalloyed cast iron. Methods for determination of copper

GOST 22536.9-88: Carbon steel and unalloyed cast iron. Methods for determination of nickel

GOST 24507-80: Non-destructive testing. Forgings from ferrous and non-ferrous metals. Ultrasonic methods of slow defection

GOST 25346-89: Basic norms of interchangeability. Unified system of tolerances and fits. General, series of tolerances and fundamental deviations

GOST 25347-82: Basic norms of interchangeability. Unified system of tolerances and fits. Tolerance zones and recommendable fits

GOST 27809-95: Cast iron and steel. Methods of spectrographic analysis

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST 28473-90: Iron, steel, ferroalloys, metal chromium and metal manganese. General requirements for methods of analysis

GOST 4165-78: Reageuts. Copper II sulphate pentahydrate. Specifications

GOST 4204-77: Reagents. Sulphuric acid. Specifications

GOST 4543-71: Structural alloyed steel

GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades

GOST 5949-75: Gauged corrosion-resistant, heat-resistant and high-temperature steel shape

GOST 6032-2003: Corrosion-resistant steels and alloys. Test methods of intercrystalline corrosion resistance

GOST 6032-89: Corrosion-resistant steels and alloys. Methods for determination of intercrystalline corrosion resistance

GOST 7062-90: Carbon and alloyed steel forgings fabricated by press forging. Allowances and tolerances

GOST 7417-75: Calibrated round steel

GOST 7505-74: Steel stamping forgings. Tolerances, allowances and forging laps

GOST 7505-89: Steel stamping forgings. Tolerances, allowances and forging laps

GOST 7564-97: Rolled products general rules of samples, rough specimens and test pieces selection for mechanical and technological testing

GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition

GOST 7566-94: Metal products

GOST 7829-70: Carbon and alloyed steel forgings fabricated by hammer forging. Allowances and tolerances

GOST 8479-70: Structural carbon and alloy steel forgings

GOST 9012-59: Metals. Method of Brinell hardness measurement

GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature

The Document is Referenced By:

GOST 24725-81: Shafts of ship shafting. General specifications

GOST 8838-81: Shaftline conical joints. Types, construction and dimensions

Customers Who Viewed This Item Also Viewed:

Petroleum for oil-processing plants. Specifications
Language: English
Price: $18.00
Electrical articles. General requirement for environment mechanical stability
Language: English
Price: $28.00
Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
Power transformer on-load tap-changing devices. General specifications
Language: English
Price: $167.00
Conical pipe thread. Profile, basic dimensions and tolerances
Language: English
Price: $71.00
Glass and glass products. Visual faults. Terms and definitions
Language: English
Price: $158.00
Glass and glass products. Inspection methods for geometric parameters and appearance
Language: English
Price: $110.00
Weldable deformed reinforcing rolled products of A500C and B500C classes for reinforcement of concrete constructions. Specifications
Language: English
Price: $112.00
Crude petroleum. General specifications
Language: English
Price: $58.00
Power transformers. Test methods of tap changing devices
Language: English
Price: $626.00
Unified system for design documentation. Stages of designing
Language: English
Price: $71.00
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $215.00
Rolled of normal, increased - and high-strength steel for shipbuilding. Specifications
Language: English
Price: $1,639.74
Guidelines for the photometric determination of hydrogen sulfide in the air
Language: English
Price: $62.00
Tempered glass. Specifications.
Language: English
Price: $149.00
Glass with low emissivity hard coating. Specifications.
Language: English
Price: $212.00
Glass laminated. Specifications.
Language: English
Price: $231.00
Water quality. Sewage water
Language: English
Price: $120.30
Passenger cars. Windscreen defrosting and demisting systems. Technical requirements and test methods
Language: English
Price: $97.00
Passenger cars. Windscreen wiper and washer systems. Technical requirements and test methods
Language: English
Price: $171.00

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!