GOST R 52931-2008
ГОСТ Р 52931-2008
|
|
Instruments for process monitoring and control. General specifications
Приборы контроля и регулирования технологических процессов. Общие технические условия
Status: Effective - Introduced for the first time
This standard applies to devices designed to control and regulate technological processes and perform one or more of the following functions: - to obtain information; - transfer, input and (or) information output; - transformation, processing and storage of information
Настоящий стандарт распространяется на приборы, предназначенные для контроля и регулирования технологических процессов и выполнения одной или нескольких из следующих функций: - получения информации; - передачи, ввода и (или) вывода информации; - преобразования, обработки и хранения информации
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
6/27/2008
SKU: RUSS70595
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
17 Metrology and measurements. Physical phenomena »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
001/2011 TR TS. On safety of railway rolling stock »
Regulations and standards (to TR CU 001/2011) »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
003/2011 TR TS. On safety of railway infrastructure »
Regulations and standards (for TR CU 003/2011) »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
3 Activities of testing laboratories »
3.2 Technical equipment of testing laboratories »
3.2.2 Measuring instruments and test equipment »
3.2.2.1 Basic requirements for instruments and test equipment »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.020 Metrology and measurements in general »
National standards »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.020 Metrology and measurements in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
P Measuring devices. Automation and computing facilities »
P0 General rules and regulations for instrument-making industry »
P01 Technical documentation and general technical requirements. »
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 10434-82: Electric contact connections. Classification. General technical requirements
GOST 12.1.003-83: Noise. General safety requirements
GOST 12.1.009-76: Occupational safety standards system. Electrical safety. Terms and definitions
GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements
GOST 12.3.019-80: Occupational safety standards system. Electrical tests and measurements. General safety requirements
GOST 14192-96: Cargo marking
GOST 14254-96: Degrees of protection provided by enclosures (IP Code)
GOST 15.005-86: Creation of articles manufactured individually or in small batches and assembled at the place of operation
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15151-69: Machines, instuments and other industrial products for tropics. General specifications.
GOST 15846-2002: Production for transportation to the areas of Far North and similar regions. Packing, marking, transportation and storage
GOST 17216-2001: Industrial cleanliness. Grades of liquids purity
GOST 17433-80: Industrial purity. Compressed air. Grades of contamination
GOST 19104-88: Low-frequency voltage up to 1500 V cylindrical connectors. Basic parameters and dimensions
GOST 19768-93: Information technology. 8-bit coded character sets. Binary code for information processing
GOST 2.601-2006: Unified system for design documentation. Exploitative documents
GOST 2.610-2006: Unified system for design documentation. Rules for making exploitative documents
GOST 20.57.406-81: Electrical equipment, devices for electronic technology and quantum electronics
GOST 20504-81: System of standardized type structures of SSI aggregated complexes. Types and basic dimensions
GOST 22782.3-77: Explosion-proof electrical equipment with special means
GOST 23170-78: Packing for products of engineering industry. General requirements.
GOST 23222-88: Precision characteristics fulfilment of automation means prescript function. Requirements for rating. General control methods
GOST 24054-80: Engineering and instrument production items. Leak detection methods. General requirements
GOST 24754-81: General purpose mining electric equipment
GOST 25034-85: Screw contact terminals
GOST 25154-82: Terminal contact blocks with flat terminals. Design, main parameters and dimensions
GOST 25164-96: Connections of instruments and devices with external hydraulic and gas lines. Types, basic parameters and dimensions. Technical requirements
GOST 25165-82: Connections of SSI instruments and devices with external pneumatic lines. Types, basic parameters and dimensions. Technical requirements
GOST 26.010-80: Unified system of standards for instrument-making. Measuring and automation devices. Input and output frequency electric continuous signals
GOST 26.011-80: Measuring and automation devices. Input and output current and voltage continuous signals
GOST 26.012-94: Measuring and automation devices. Hydraulic input and output signals
GOST 26.013-81: Measurement and automation means. Input and output electrical signals with discrete change of parameters
GOST 26.014-81: Measurement and automation means. Input and output electric coding signals
GOST 26.015-81: Measuring and automation devices. Pneumatic input and output signals
GOST 26331-94: Joints fastening primary temperature transducers to process pipe-lines and apparatus. Types and basic dimensions. Technical requirements
GOST 26828-86: Instrumentation and machine building products. Marking
GOST 26883-86: Exposure factors. Terms and definitions
GOST 28601.1-90: System of bearing structures of the 482,6 mm series. Panels and racks. Main dimensions
GOST 28601.2-90: System of bearing structures of the 482,6 mm series. Cabinets and rack structures. Main dimensions
GOST 28601.3-90: System of bearing structures of the 482,6 mm series. Subracks and associated plug-in units. Main dimensions
GOST 30630.0.0-99: Environment stabilty test methods for machines, instruments and other industrial products. General requirements
GOST 31273-2003: Noise of machines. Determination of sound power levels using sound pressure. Precision methods for anechoic and semi-anechoic rooms
GOST 31274-2004: Noise of machines. Determination of sound power levels using sound pressure. Precision methods for reverberation rooms
GOST 356-80: Valves and details for piping. Pressures conditional, test and operational. Lines.
GOST 8.009-84: State system for ensuring the uniformity of measurements. Standardized metrological characteristics of measuring instruments
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 50043.3-2000: Connecting devices for low voltage circuits for household and similar purposes. Part 2-2. Particular requirements for connecting devices as separate entities with screwless-type clamping units
GOST R 51317.3.2-2006: Electromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <=16 A per phase). Limits and test methods.
GOST R 51317.3.3-2008: Electromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A (per phase) and not subject to conditional connection. Limits and test methods
GOST R 51317.3.3-99: Electromagnetic compatibility of technical equipment. Voltage fluctuation and flicker impressed on low-voltage supply systems by equipment with rated current <=16 A. Limits and test methods
GOST R 51318.11-2006: Electromagnetic compatibility of technical equipment. Industrial, scientific, medical and domestic (ISMD) high-frequency equipment. Radio disturbance. Limits and methods of measurement
GOST R 51318.14.1-2006: Electromagnetic compatibility of technical equipment. Household appliances, electric tools and similar apparatus. Radio disturbance. Limits and methods of measurements
GOST R 51318.22-2006: Electromagnetic compatibility of technical equipment. Information technology equipment. Man-made radio disturbance. Limits and methods of measurement
GOST R 51320-99: Electromagnetic compatibility of technical equipment. Man-made radio disturbance. Test methods for technical equipment which are man-made radio disturbance sources
GOST R 51330.0-99: Explosionproof electrical apparatus. Part 0. General requirements
GOST R 51330.10-99: Electrical apparatus for explosive gas atmospheres. Part 11. Spark-free power line, type i
GOST R 51330.1-99: Electrical apparatus for explosive gas atmospheres. Part 1. Construction and verification test of flameproof enclosures of electrical apparatus
GOST R 51330.20-99: Mining electrical equipment. Insulation, leakage paths and electrical gaps. Technical requirements and testing methods
GOST R 51330.3-99: Explosion protected electrical equipment. Part 2. Filling or purging of the pressurized enclosure P
GOST R 51371-99: Mechanical environment stability test methods for machines, instruments and other industrial products. Test for influence of shocks
GOST R 51400-99: Noise of machines. Determination of sound power levels using sound pressure. Engineering methods for small, movable sources in reverberant fields for hard - walls test rooms and for special reverberation test rooms
GOST R 51401-99: Noise of machines. Determination of sound power levels of noise sources using sound pressure. Engineering method in an essentially free field over a reflecting plane
GOST R 51402-99: Noise of machine. Determination of power levels of noise sources using sound pressure. Survey method using an enveloping measurement surface over a reflecting plane
GOST R 51522-99: Electromagnetic compatibility of technical equipment. Electrical equipment for measurement, control and laboratory use. Requirements and test methods
GOST R 52319-2005: Safety requirements for electrical equipment for measurement, control and laboratory use. Part 1. General requirements
GOST R 52543-2006: Hydraulic drives. Safety requirements
GOST R 8.568-97: State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
GOST R 8.585-2001: State system for ensuring the uniformity of measurements. Thermocouples. Nominal static characteristics of conversion
GOST R ISO 3951-1-2007: Statistical methods. Sampling procedures for inspection by variables. Part 1. Specification for single sampling plans indexed by acceptance quality limit for lot-by-lot inspection for a single quality characteristic and a single AQL
POT R M-016-2001: Inter-Industry Occupational Safety and Health Regulations (Safety Regulations) for Operation of Electrical Installations
PR 50.2.006-94: Procedure for calibration of measurement equipment
The Document is Referenced By:
GOST 13196-93: Means of level measuring and sampling of oil and oil products
GOST 1532-81: Viscosimeters of relative viscosity. Specifications
GOST 24.104-2023: Unified system of standards for automated control systems. Automated control systems. General requirements
GOST 24.104-85: Unified system of standards of computer control systems. Computer control systems. General requirements
GOST 26781-85: Milk. Method of pH measuring
GOST 31516-2012: Medical maximum glass thermometrs. General specifications
GOST 31817.1.1-2012: Alarm systems. Part 1. General requirements. Section 1. General
GOST 31830-2012: Electrostatic precipitators. Safety requirement and methods of testing
GOST 32320-2013: Anti-theft protection technical means and systems. General requirements and test methods
GOST 32321-2013: Alarms guarding surface shock-contact glass break detectors for use in buildings. General requirements and test methods
GOST 33974-2016: Remote control for railway energy supply system. General specifications
GOST 6651-2009: State system for ensuring the uniformity of measurements. Platinum, copper, and nickel resistance resistive temperature transducers. General requirements and test methods
GOST 8.629-2013: State system for ensuring the traceability of measurements. Stationary and mobile verification means for combustible gases and vapours gas analysers and gas alarm devices. General technical requirements
GOST R 22.1.14-2013: Safety in emergencies. Information-computational complexes of Structured system for monitoring and control of building/construction engineering equipment. Technical requirements. Test methods
GOST R 22.9.29-2015: Safety in emergencies. Emergency and rescue vehicles. Test methods
GOST R 50659-2012: Microwave Doppler detectors for use in buildings and open areas. General requirements and test methods
GOST R 50777-2014: Passive infrared detectors for using at different conditions. General requirements and test methods
GOST R 51241-2008: Access control units and systems. Classification. General technical requirements. Test methods
GOST R 51649-2014: Heat meters for water heat supply systems. General specifications
GOST R 52016-2003: Point-to-point radio communication MF-HF receivers. Parameters, general technical requirements and methods of measuring
GOST R 52434-2005: Active infra-red detectors. General technical requirements and test methods
GOST R 52435-2015: Alarm intruder technical means. Classification. General technical requirements and test methods
GOST R 52582-2006: Looks for protective designs. Requirements and test methods for resistance to criminal open without lock breakage and to burglary
GOST R 52651-2022: Linear radio-wave intrusion detectors for perimeters. General technical requirements and test methods
GOST R 52932-2008: Electromagnetic, ultrasonic, vortex and fluid oscillator counters for water heat supply systems. General specifications
GOST R 52933-2008: Capacitance intrusion detectors for rooms. General technical requirements and test methods
GOST R 53325-2012: Fire techniques. Means of fire automatics. General technical requirements and test methods
GOST R 53326-2009: Fire equipment. Self-contained open-circuit compressed air breathing apparatus. General technical requirements. Test methods
GOST R 53560-2022: Alarm systems. Power supply sources. Classification. General technical requirements and test methods
GOST R 53702-2009: Alarms guarding surface vibration detectors for blocking of structures and safes. General technical requirements and test methods
GOST R 53705-2009: Complex security systems. Stationary metal detectors for apartments. General technical requirements. Test methods
GOST R 54344-2011: Fire equipment. Mobile manipulation vehicle systems for eliminating of emergencies and fire extinguishing. Classification. General technical requirements. Test methods
GOST R 54455-2011: Alarm systems. Environmental test methods
GOST R 54831-2011: Control access systems. Controlled barrier units. General technical requirements. Test methods
GOST R 54832-2011: Alarms are guarding point magnetic contact. General requirements and test methods
GOST R 55149-2012: Fire techniques. Individual fire alarm devices. General technical requirements and test methods
GOST R 55150-2012: Combined passive infrared ultrasonic intrusion detectors for use in buildings. General technical requirements and test methods
GOST R 55182-2012: Passenger cars on locomotive traction. General technical requirements
GOST R 55197-2012: Remote control for railway energy supply system. General specifications
GOST R 55233-2012: Intelligent gas sensor modules. General technical requirements and methods of testing
GOST R 55614-2013: Non-destructive testing. Ultrasonic thickness gauges. General technical requirements
GOST R 56102.3-2019: Centralized surveillance systems. Part 3. Subsystem of information transfer. General technical requirements and test methods
GOST R 56830-2015: Petroleum and natural gas industries. Electrical submersible pump units. General technical requirements
GOST R 56942-2016: Automated measuring system of accountancy and control of thermal energy. General specifications
GOST R 57121-2016: Intelligent terminal for feeder bay of traction substations, for pole-mounted substations and for specific electric railways equipment. Technical requirements
GOST R 57238-2016: Rentgeno-television conveyor-based installations (introscopes). General technical requirements
GOST R 57552-2017: Fire techniques. Multi-criteria fire detectors. General technical requirements and test methods
GOST R 58399-2019: Non-destructive testing. Optical methods. General requirements
GOST R 58604-2019: Unified energy system and isolated energy systems. Thermal power plants. Automated process control systems. Terms of creation. Norms and Requirements
GOST R 58858-2020: Alarm systems. Aerosol systems. General technical requirements and test methods
GOST R 58927-2020: Fuel dispensing columns. General specifications
GOST R 70451-2022: Unified energy system and isolated power systems. Electrical substations. Automated control systems of technological processes. Conditions for creation. Norms and requirements.
GOST R 70518-2022: Automated systems of nuclear facilities. Metrological Support. General provisions.
GOST R 70852-2023: Tractors and agricultural machines. Hardware-software complex for control of highly automated machine-tractor units. Technical requirements and test methods
GOST R 8.1015-2022: State System for Ensuring Uniformity of Measurements (GSI). Metrological expertise of normative and technical documentation in the field of atomic energy use. Organization and basic requirements to the content
GOST R 8.666-2009: State system for ensuring the uniformity of measurements. Moisture meters neutron. The method of verification
GOST R 8.704-2010: State system for ensuring the uniformity of measurements. Working dilatometers. Verification procedure
GOST R 8.730-2010: State system for ensuring the uniformity of measurements. Interference refractometers for gas analysis. Verification procedure
GOST R 8.758-2011: State system for ensuring the uniformity of measurements. Coulometric hygrometers. General specifications
GOST R 8.779-2012: State system for ensuring the uniformity of measurements. Standards thermoelectric platinum-rhodium/platinum-rhodium converters of the first, second and third grades. Verification procedure
GOST R 8.812-2013: State system for ensuring the traceability of measurements. Multifunctional information measuring systems for mines and underground digging safety. Dust and gas measuring heads for mine air. Verification procedure
GOST R 8.823-2013: State system for ensuring the uniformity of measurements. Meters for hot water. General metrological and technical requirements
GOST R 8.854-2013: State system for ensuring the uniformity of measurements. Standard platinum and rhodium-iron resistance thermometers. Methods of calibration
GOST R 8.855-2013: State system for ensuring the uniformity of measurements. Standard platinum and rhodium-iron resistance thermometers. General requirements and test methods
GOST R 8.905-2015: State system for ensuring the uniformity of measurements. Indicating pressure gauges. Ordinary measuring instruments. Metrological requirements and test methods
GOST R 8.906-2015: State system for ensuring the uniformity of measurements. Indication pressure gauges. Reference measuring instruments. Metrological requirements and test methods
GOST R 8.915-2016: State system for ensuring the uniformity of measurements. Diaphragm volumetric gas meters. General technical requirements, test and calibration methods
GOST R 8.922-2016: State system for ensuring the traceability of measurements. Gas analyzers and gas alarm devices for determination of combustible gases and vapors in working zone air. Testing method
GOST R 8.958-2019: State system for ensuring uniformity of measurements. The best technology available. Automatic measuring systems for controlling harmful industrial emissions. Test Methods and Tools
MP 94-221-2019: State system for ensuring the uniformity of measurements. Differential scanning calorimeters. DSC-500B. Verification Method
MP 94-221-2019: State system for ensuring the uniformity of measurements. Differential scanning calorimeters. DSC-500B. Verification Method
MVI.MN 5562-2016: Determination of the concentrations of Agidol-2, Captax, Altax, Tsimat, Ethylcimate, Diphenylguanidine, Thiuram D and Thiuram E in aqueous extracts from materials. Liquid Chromatography Measurement Procedure
ODM 218.5.009-2008: Technology for magnetic diagnostics of prestressed reinforcement and assessment of the technical condition of reinforced concrete beams of bridge structures
PNST 16-2014: Mining equipment. Multipurpose safety systems for coal mines. Monitoring system of an aerological condition of excavations. General technical requirements and test methods
PNST 17-2014: Mining equipment. Multipurpose safety systems for coal mines. Systems for observation and notification of an accident. General technical requirements
PNST 18-2014: Mining equipment. Multipurpose safety systems for coal mines. System for searching and localization persons in accident. General technical requirements and test methods
PNST 370-2019: Automated remote control systems for shunting locomotives. General technical requirements
PNST 640-2022: Control systems for railway rolling stock in automatic and remote modes. General technical requirements
PNST 641-2022: Control systems for railway rolling stock in automatic and remote modes. Requirements for the object recognition subsystem
RD 52.44.916-2021: Organization and conduct of routine observations of the background state of environmental pollution and transboundary transport of pollutants
ST TsKBA 087-2010: Pipe fittings. Electric drives. General technical conditions
|
Customers Who Viewed This Item Also Viewed:
 |
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English |
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English |
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English |
Diesel fuel EURO. Specifications
Language: English |
Inch thread with a profile angle of 55 degrees
Language: English |
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English |
Norms of structural design of nuclear power plants with reactors of different types
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
