GOST R 55599-2013

ГОСТ Р 55599-2013

High pressure pipeline assembly units and components above 10 up to 100 MPa. General technical requirements

Сборочные единицы и детали трубопроводов на давление свыше 10 до 100 МПа. Общие технические требования

Status: Effective - Introduced for the first time. IUS 7-2014

This standard applies to assembly units and parts of technological and other pipelines according to GOST 22791 - GOST 22826, intended for the transportation of gaseous, vaporous and liquid media in the pressure range above 10 to 100 MPa with a nominal diameter of 6 to 200 mm and operating temperatures from minus 70 ° C to plus 540 oC. This standard establishes the basic technical requirements for the manufacture, acceptance and delivery of assembly units and parts of high-pressure pipelines, materials for their manufacture, and test methods. In addition to the requirements of this standard, you should follow the rules and regulations on industrial safety.

Настоящий стандарт распространяется на сборочные единицы и детали технологических и других трубопроводов по ГОСТ 22791 - ГОСТ 22826, предназначенных для транспортирования газообразных, парообразных и жидких сред в диапазоне давлений свыше 10 до 100 МПа номинальным диаметром от 6 до 200 мм и рабочих температур от минус 70 оС до плюс 540 оС. Настоящий стандарт устанавливает основные технические требования к изготовлению, приемке и поставке сборочных единиц и деталей трубопроводов высокого давления, материалам для их изготовления, методам испытаний. В дополнение к требованиям настоящего стандарта следует руководствоваться нормами и правилами по промышленной безопасности

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 9/6/2013

SKU: RUSS70615

Price: $410.31




The Product is Contained in the Following Classifiers:

Welding regulations » Main materials »

Welding regulations » Pipelines »

Welding regulations » Admission Testing »

Welding regulations » Documentation »

Welding regulations » Non-destructive control »

Welding regulations » Mechanical Testing »

Welding regulations » Heat treatment »

Welding regulations » Defects »

Welding regulations » Main materials » Steel, cast iron »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 032/2013 TR CU. On safety of overpressure equipment » Regulations and standards (to 032/2013 TR CU) »

ISO classifier » 71 CHEMICAL INDUSTRY » 71.120 Equipment for chemical industry » 71.120.99 Other chemical industry equipment »

National standards » 71 CHEMICAL INDUSTRY » 71.120 Equipment for chemical industry » 71.120.99 Other chemical industry equipment »

National Standards for KGS (State Standards Classification) » Latest edition » G Machines, equipment and tools » G4 Machinery and equipment for heavy industry » G47 Machines and equipment for chemical industry »


The Document References:

GOST 10006-80: Metal pipes

GOST 10198-91: Wooden boxes for weights of mass over 200 up to 20000 kg. General specifications

GOST 10354-82: Polyethylene film Specifications

GOST 10493-81: Rigid and compensating

GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications

GOST 10549-80: Screw thread runout. Washout threads, total thread runouts, undercuts and chamfers

GOST 11878-66: Austenitic steel bars. Methods for the determination of the ferrite-phase

GOST 12.2.052-81: Occupational safety standards system. Equipment working with gaseous oxygen. General safety requirements

GOST 14140-81: Basic norms of interchangeability. Position tolerances of bore axes for fasteners

GOST 14192-96: Cargo marking

GOST 1497-84: Metals. Methods of tension test

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 15846-2002: Production for transportation to the areas of Far North and similar regions. Packing, marking, transportation and storage

GOST 16093-2004: Basic norms of interchangeability. Metric screw thread. Tolerances. Clearance fits

GOST 16295-93: Anticorrosion paper

GOST 1778-70: Steel. Metallographic methods for the determination of non-metallic inclusions

GOST 18442-80: Non-destructive testing. Capillary methods. General requirements

GOST 19281-89: Rolled steel with increased strength. General specifications

GOST 2.610-2006: Unified system for design documentation. Rules for making exploitative documents

GOST 20072-74: Heat-resistant steel

GOST 21105-87: Non-destructive testing. Method of magnetic particle testing

GOST 21140-88: Containers

GOST 22241-76: Transportation plugs. General specifications

GOST 22791-83: Assembly units and pipeline parts. Dead lenses with indicator for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions

GOST 22792-83: Assembly units and pipeline parts. Unions for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions

GOST 22793-83: Assembly units and pipeline parts. Bend arms for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions

GOST 22794-83: Assembly units and pipeline parts. Flanged elbow bends for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions

GOST 22795-83: Assembly units and pipeline parts. Abutment and flanged elbow bends for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions

GOST 22796-83: Assembly units and pipeline parts. Unequal flanged elbow bends for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions

GOST 22797-83: Assembly units and pipeline parts. Abutment for bends for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions

GOST 22798-83: Assembly units and pipeline parts. Flanged double bends for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions

GOST 22799-83: Assembly units and pipeline parts. Flanged angles for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions

GOST 22800-83: Assembly units and pipeline parts. Armed and flanged angles for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions

GOST 22801-83: Assembly units and pipeline parts. Flanged reducing and open branches for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions

GOST 22802-83: Assembly units and pipeline parts. Flanged and armed open T-branches for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions

GOST 22803-83: Assembly units and pipeline parts. Flanged asymmetric reducing T-branches for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions

GOST 22804-83: Assembly units and pipeline parts. Flanged reducing T-branches for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions

GOST 22805-83: Assembly units and pipeline parts. Flanged inserting T-branches for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions

GOST 22806-83: Assembly units and pipeline parts. Flanged fillets for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions

GOST 22807-83: Assembly units and pipeline parts. Flanged lens metering diaphragms for Pnom 9,81-63 MPa (100-630 kgf/sm sq). Construction and dimensions

GOST 22808-83: Assembly units and pipelines parts. Flanged lens arms for Pnom 9,81-63 MPa (100-630 kgf/sm sq). Construction and dimensions

GOST 22809-83: Assembly units and pipeline parts. Flanged lenses with two arms for Pnom 9,81-40 MPa (100-400 kgf/sm sq). Construction and dimensions

GOST 22810-83: Assembly units and pipeline parts. Pocket angles for resistance thermometers and thermocouple thermometers for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions

GOST 22811-83: Assembly units and pipeline parts. Arms for resistance thermometers and thermocouple thermometers for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions

GOST 22812-83: Assembly units and pipeline parts. Pockets for resistance thermometers and thermocouple thermometers for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions

GOST 22813-83: Assembly units and pipeline parts. Reducing flanges for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions

GOST 22815-83: Assembly units and pipeline parts. Flanged plugs for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions

GOST 22816-83: Assembly units and pipeline parts. Flanged plugs with inserts for Pnom 9,81-40 MPa (100-400 kgf/sm sq). Construction and dimensions

GOST 22817-83: Assembly units and pipeline parts. Flanged bent arms for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions

GOST 22818-83: Assembly units and pipeline parts. Elbow bends with abutments for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions

GOST 22819-83: Assembly units and pipeline parts. Double bends for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions

GOST 22820-83: Assembly units and pipeline parts. Angles for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions

GOST 22821-83: Assembly units and pipeline parts. Armed angles for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions

GOST 22822-83: Assembly units and pipeline parts. Reducing T-branches for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions

GOST 22823-83: Assembly units and pipeline parts. Open armed T-branches for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions

GOST 22824-83: Assembly units and pipeline parts. Asymmetric reducing T-branches for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions

GOST 22825-83: Assembly units and pipeline parts. Inserting T-branches for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions

GOST 22826-83: Assembly units and pipeline parts. Fillets for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions

GOST 24507-80: Non-destructive testing. Forgings from ferrous and non-ferrous metals. Ultrasonic methods of slow defection

GOST 24643-81: Basic norms of interchangeability. Tolerances of form and position of surfaces. Numerical values

GOST 24705-2004: Вasic norms of interchangeability. Metric screw thread. Basic dimensions

GOST 25054-81: Forgings made of corrosion-resistant steels and alloys

GOST 25346-89: Basic norms of interchangeability. Unified system of tolerances and fits. General, series of tolerances and fundamental deviations

GOST 25347-82: Basic norms of interchangeability. Unified system of tolerances and fits. Tolerance zones and recommendable fits

GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications

GOST 356-80: Valves and details for piping. Pressures conditional, test and operational. Lines.

GOST 4543-71: Structural alloyed steel

GOST 515-77: Bitumized and tarred packaging paper

GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades

GOST 6032-2003: Corrosion-resistant steels and alloys. Test methods of intercrystalline corrosion resistance

GOST 7505-89: Steel stamping forgings. Tolerances, allowances and forging laps

GOST 7564-97: Rolled products general rules of samples, rough specimens and test pieces selection for mechanical and technological testing

GOST 8479-70: Structural carbon and alloy steel forgings

GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements

GOST 9012-59: Metals. Method of Brinell hardness measurement

GOST 9150-2002: Basic norms of interchangeability. Metric screw threads. Profile

GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature

OST 108.030.113-87: Carbon and alloy steel forgings for thermal and nuclear power stations equipment and pipelines. Technical specifications.

PB 03-585-03: Process Pipelines Design and Safe Operation Rules

SNiP 3.05.05-84: Processing equipment and process pipelines

GOST 22814-83: Assembly Units and Pipeline Parts. Armed reducing flanges. For Pn above 10 to 40 МPа . ( above 100 tо 400 кgf/сm2)

The Document is Referenced By:

GOST 32569-2013: Steel pipe technology. Requirements for design and operation of explosive and chemically dangerous production

SP 77.13330.2016: Systems of automation. 

Customers Who Viewed This Item Also Viewed:

Electromagnetic compatibility of technical equipment. Immunity of equipment for general lighting purposes to electromagnetic disturbance. Requirements and test methods
Language: English
Price: $218.25
Еlectromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <= 16 A per phase). Limits and test methods
Language: English
Price: $410.31
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
Language: English
Price: $714.89
Pipeline valves. General safety requirements
Language: English
Price: $213.84
Еlectromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A and not subject to conditional connection. Limits and test methods
Language: English
Price: $359.87
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Conformity assessment system for the use of nuclear energy. Personnel in the non-destructive and destructive testing of metal. Requirements and qualification procedure Дата введения в действие 15.03.2018
Language: English
Price: $207.90
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Language: English
Price: $121.77
Unified system of corrosion and ageing protection. Paint coatings. Groups of operation conditions
Language: English
Price: $158.40
Atom stations. Equipment, instruments, means of monitoring and control systems. General technical requirements
Language: English
Price: $1,146.54
System of design documents for construction. Basic requirements for design and working documentation
Language: English
Price: $867.18
Reinforcing rolled products for reinforced concrete constructions. Specifications
Language: English
Price: $298.98
Passenger cars on locomotive traction. Requirements for structural strength and dynamic qualities
Language: English
Price: $595.58
Non-destructive Testing. Welded Joints. Ultrasonic Methods
Language: English
Price: $140.58
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $293.04
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $212.85
Pipeline valves. Leakage rates of valves
Language: English
Price: $173.25
Compilation and execution of safety data sheet of chemical products
Language: English
Price: $175.23
Supports for Cylindrical and Conical Upright Apparatus. Types and Basic Parameters
Language: English
Price: $573.20

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!