imgalt

GOST 26917-2000

ГОСТ 26917-2000

Underground loading machines. General technical requirements and test methods

Машины погрузочные шахтные. Общие технические требования и методы испытаний

Status: Not effective - Canceled in the Russian Federation. Registration information 1081-st dated November 22, 2012 (official website of Rosstandart); IUS 10-2014

The standard applies to loading mine machines designed for loading rock mass into vehicles during underground mining and construction of underground structures. The standard establishes general technical requirements for machines and methods for monitoring indicators during testing. The standard does not establish a procedure for testing and does not apply to components of machines and machines, the production of which began before the introduction of the standard.

Стандарт распространяется на погрузочные шахтные машины, предназначенные для погрузки горной массы в транспортные средства при подземной разработке полезных ископаемых и строительстве подземных сооружений. Стандарт устанавливает общие технические требования к машинам и методы контроля показателей при проведении испытаний. Стандарт не устанавливает процедуру проведения испытаний и не распространяется на комплектующие изделия машин и на машины, производство которых начато до введения стандарта.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: State Committee of the Russian Federation for Standardization and Metrology, 4/18/2001

SKU: RUSS70739

Price: $542.00



imgalt

The Product is Contained in the Following Classifiers:

Evidence base (TR CU, Technical Regulation of the Customs Union) » 010/2011 TR CU. On safety of machinery and equipment » Regulations and standards (to ТР ТС ТС 010/2011) »

ISO classifier » 73 MINING AND MINERAL PRODUCTS » 73.020 Mining and opencast mining »

National standards » 73 MINING AND MINERAL PRODUCTS » 73.020 Mining and opencast mining »

National Standards for KGS (State Standards Classification) » Latest edition » G Machines, equipment and tools » G4 Machinery and equipment for heavy industry » G41 Exploration, mining and mineral processing equipment »

National Standards for OKSTU » HEAVY, POWER AND TRANSPORTATION ENGINEERING PRODUCTS » Equipment for excavation of mine workings »


The Document References:

GOST 10198-91: Wooden boxes for weights of mass over 200 up to 20000 kg. General specifications

GOST 12.1.003-83: Noise. General safety requirements

GOST 12.1.005-88: General sanitary requirements for working zone air

GOST 12.1.012-90: SSBT. Occupational Safety Standards System. Vibrational safety. General requirements

GOST 12.1.016-79: Work area air

GOST 12.1.028-80: System of the standards for safety of work

GOST 12.2.003-91: Industrial equipment. General safety requirements

GOST 12.2.020-76: Explosion proof electrical apparatus. Terms and definitions. Classification. Marking

GOST 12.2.106-85: Occupational safety standards system. Machines and mechanisms for mining of ore, non-ore and placer deposits. General hygienic requirements and methods of testing

GOST 12.4.012-83: Occupational safety standards system. Vibration. Means for measurement and control of vibration in site. Technical requirements

GOST 12.4.051-87: Individual hearing protection means

GOST 12969-67: Plates for machines and devices. Technical requirements

GOST 12971-67: Rectangular plates for machines and devices. Dimensions

GOST 13837-79: General purpose dynamometers

GOST 14192-96: Cargo marking

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 15846-79: Products for transportation to the areas of the far north and remote regions

GOST 17168-82: Octave and one-third-of-octave electronic filters

GOST 17187-81: Noise meters

GOST 17216-71: Industrial purity

GOST 17433-80: Industrial purity. Compressed air. Grades of contamination

GOST 19300-86: Instruments for measurement of surface roughness by the profile method. Contact profilographs and profilometers. Types and main parameters

GOST 19862-87: Pneumatic drives. Methods of measuring parameters

GOST 19862-93: Pneumatic actuators. Methods for measurement of parameters

GOST 2.601-95: Operational documents

GOST 20799-88: Industrial oils Specifications

GOST 21153.0-75: Rocks. Sampling and general requirements for the methods of physical testing

GOST 21153.1-75: Rocks. Method for the determination of strength factor according to Protodyakonov

GOST 21753-76: Man -machine system control levers

GOST 22782.0-81: Explosion-proof electrical equipment

GOST 23170-78: Packing for products of engineering industry. General requirements.

GOST 23543-88: Geodesic instruments

GOST 23941-79: Noise of machines. Methods for determination of noise characteristics. General requirements

GOST 2405-88: Pressure gauges, vacuum gauges, pressure-vacuum gauges, pressure meters, draft gauges and draft-pressure gauges

GOST 24634-81: Wooden boxes for export products. General specifications

GOST 24754-81: General purpose mining electric equipment

GOST 24940-96: Buildings and structures. Methods of measuring luminance

GOST 27.410-87: Industrial product dependability. Inspection methods of reliability indices and plans of check tests on reliability

GOST 28197-90: National conformity mark. Form, sizes and technical requirements

GOST 28723-90: Velocity, electromagnetic and vortex flow meters

GOST 29329-92: Balance for static weightings

GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 5378-88: Vernier protractors. Specifications

GOST 6570-96: Electrical induction active and reactive energy meters

GOST 7502-98: Measuring metal tapes. Specifications

GOST 8476-93: Direct acting indicating analogue electrical measuring instruments and their accessories. Part 3. Special requirements for wattmeters and varmeters

GOST 8711-93: Direct acting indicating analogue electrical measuring instruments and their accessories. Part 2. Special requirements for ammeters and voltmeters

GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements

GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations

GOST 9.104-79: Unified system corrosion of corrosion and ageing protection. Paint coatings. Croups of operation conditions

GOST 9.401-91: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the action of climatic factors.

GOST 9.402-80: Metal surface preparation for painting

GOST 9871-75: Mercury-in-glass electric-contact thermometers

GOST R 50460-92: Mark of conformity for obligatory certification form, dimensions dnd technical requirements

GOST R 51330.0-99: Explosionproof electrical apparatus. Part 0. General requirements

GOST R 51402-99: Noise of machine. Determination of power levels of noise sources using sound pressure. Survey method using an enveloping measurement surface over a reflecting plane

The Document is Referenced By:

GOST R 55153-2012: The mountain-mine equipment. Underground loading-transport machines. The safety requisitions and test methods

GOST R 55730-2013: Mining equipment. Loading-transport machines. General technical requirements

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English
Price: $634.00
imgalt
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English
Price: $87.00
imgalt
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English
Price: $71.00
imgalt
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English
Price: $139.00
imgalt
Ice cream. General technical requirements
Language: English
Price: $162.60
imgalt
Pipe fittings. Ball valves made of brass. General specifications
Language: English
Price: $398.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!