GOST R 50571.16-2007
ГОСТ Р 50571.16-2007
|
|
Low-voltage electrical installations. Part 6. Tests
Электроустановки низковольтные. Часть 6. Испытания
Status: Not effective - Superseded. Registration information 127-st dated 04/09/2019 (official website of Rosstandart); IUS 6-2019
This standard applies to low-voltage electrical installations: residential buildings; trade enterprises; public buildings; industrial buildings; agricultural and horticultural buildings; buildings of prefabricated elements; caravans and parking for them; construction sites, entertainment facilities, fairs and other temporary facilities; berths for yachts and pleasure boats; devices for external lighting of buildings and structures; medical institutions; mobile or vehicle; photovoltaic systems; low-voltage power generators. This standard also applies to: a) electrical networks with a rated voltage of 1000 V AC or 1500 V DC; For alternating current preferred frequency adopted in accordance with this standard, 50; 60 and 400 Hz. Other frequencies may be used for special purposes; b) electrical circuits with voltages greater than 1000 V, powered by installations with a voltage of no more than 1000 V AC (except for internal wiring of electrical devices), such as gas discharge lamps, electrostatic filters; c) any electrical wiring that is not covered by current standards for electrical products; d) consumer electrical installations outside buildings; e) stationary wiring, alarms, controls, etc. (except for the internal wiring of these devices); f) reconstructed or modified electrical installations, as well as for parts of an existing electrical installation that are affected by a specific extension. This standard does not apply to: electric traction equipment; automotive equipment; electrical installations on board ships; electrical installations of aircraft; electrical installations of street lighting; electrical installations of underground mines and workings; anti-interference radio equipment; safety fences; lightning protection of buildings; electrical equipment of machines and mechanisms
Настоящий стандарт распространяется на низковольтные электроустановки: жилых зданий; торговых предприятий; общественных зданий; производственных зданий; сельскохозяйственных и садоводческих строений; зданий из сборных элементов; жилых автофургонов и стоянок для них; строительных площадок, зрелищных сооружений, ярмарок и других временных сооружений; причалов для яхт и прогулочных катеров; устройств внешнего освещения зданий и сооружений; медицинских учреждений; мобильных или транспортных средств; фотогальванических систем; низковольтных электрогенераторов. Настоящий стандарт также распространяется на: a) электрические сети с номинальным напряжением 1000 В переменного тока или 1500 В постоянного тока; Для переменного тока предпочтительны частоты, принятые в соответствии с настоящим стандартом, 50; 60 и 400 Гц. Допускается использование других частот для специальных целей; b) электрические цепи напряжением, превышающим 1000 В, питаемые от установки напряжением не более 1000 В переменного тока (за исключением внутренней проводки электротехнических устройств), например газоразрядные лампы, электростатические фильтры; c) любые электропроводки, на которые не распространяются действующие стандарты на электротехнические изделия; d) электроустановки потребителя вне зданий; e) проводки стационарные, сигнализации, управления и т.п. (за исключением внутренней проводки этих устройств); f) реконструируемые или изменные электроустановки, а также для частей существующей электроустановки, на которые влияет конкретное расширение. Настоящий стандарт не распространяется на: электрическое тяговое оборудование; автотракторное оборудование; электроустановки на борту судов; электроустановки самолетов; электроустановки уличного освещения; электроустановки подземных шахт и выработок; помехоподавляющая радиоаппаратура; предохранительные ограждения; молниезащиту зданий; электрооборудование машин и механизмов
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/27/2007
SKU: RUSS70774
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
91 Building materials and construction »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.10 Operation of electrical installations, electrical equipment and power tools »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
II Industrial sanitation and occupational health »
6 Protection against electromagnetic radiation »
6.1 Non-ionizing electromagnetic fields and radiation »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.140 Installations in buildings »
91.140.50 Power supply systems »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.140 Installations in buildings »
91.140.50 Power supply systems »
National Standards for KGS (State Standards Classification) »
Latest edition »
E Power and electrical equipment »
E0 General rules and regulations for electrical and heat engineering »
E08 Application and operation »
National Standards for OKSTU »
ELECTRICAL EQUIPMENT AND MATERIALS »
General rules and regulations »
The Document is Replaced With:
GOST R 50571.16-2019: Electrical installations are low voltage. Part 6. Tests
As a Replacement Of:
GOST R 50571.16-99: Electrical installations of buildings. Part 6. Verification. Chapter 61. Initial verification
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 30331.2-95: Electrical installations of buildings. Part 3. General characteristics
GOST 30331.3-95: Electrical installations of buildings. Part 4. Protection for safety. Protection against electric shock
GOST 30331.4-95: Electrical installations of buildings. Part 4. Protection for safety. Protection against thermal effects
GOST 30331.5-95: Electrical installations of buildings. Part 4. Protection for safety. Protection against overcurrent
GOST 30331.8-95: Electrical installations of buildings. Part 4. Protection for safety. Applisation of protective measues for safety. Measures of protection against electric shock
GOST 7746-2001: Current transformers. General specifications
GOST 8594-80: Installation boxes for switches and plug sockets for flush wiring
GOST ISO/IEC 17025-2009: General requirements for the competence of testing and calibration laboratories
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 50571.10-96: Electrical installations of buildings. Part 5. Selection and erection of electrical equipment. Chapter 54. Earthing arrangements and protective conductors
GOST R 50571.1-2009: Low-voltage electrical installations. Part 1. Fundamental principles, assessment of general characteristics and definitions
GOST R 50571.15-97: Electrical installations of buildings
GOST R 50571.16-2007: Low-voltage electrical installations. Part 6. Tests
GOST R 50571.16-99: Electrical installations of buildings. Part 6. Verification. Chapter 61. Initial verification
GOST R 50571.17-2000: Electrical installations of buildings. Part 4. Protection for safety. Chapter 48. Choice of protective measures as a function of external influences. Section 482. Protection against fire
GOST R 50571.18-2000: Electrical installations of buildings. Part 4. Protection for safety. Chapter 44. Protection against overvoltages. Section 442. Protection of low-voltage installations against faults between high-voltage systems and earth
GOST R 50571.19-2000: Electrical installations of buildings. Part 4. Protection for safety. Chapter 44. Protection against overvoltages. Section 443. Protection against overvoltages of atmospheric origin or due to switching
GOST R 50571.20-2000: Electrical installations of buildings. Part 4. Protection for safety. Chapter 44. Protection against overvoltages. Section 444. Protection against electromagnetic interferences (EMI) in installations of buildings
GOST R 50571.24-2000: Electrical installations of buildings. Part 5. Selection and erection of electrical equipment. Chapter 51. Common rules
GOST R 50571.2-94: Electrical installations of buildings. Part 3. General characteristics
GOST R 50571.3-2009: Low-voltage electrical installations. Part 4-41. Requirements for safety ensuring. Protection against electric shock
GOST R 50571.3-94: Electrical installations of buildings. Part 4. Protection for safety. Protection against elecric shock
GOST R 50571.4-94: Electrical installations of buildings. Part 4. Protection for safety. Protection against thermal effects
GOST R 50571.5-94: Electrical installations of buildings. Part 4. Protection for safety. Protection against overcurrent
GOST R 50571.9-94: Electrical installations of buildings. Part 4. Security requirements. Application of overcurrent protection measures
GOST R 50571-4-44-2011: Low-voltage electrical installations. Part 4-44. Safety requirements. Protection against voltage disturbances and electromagnetic disturbances
GOST R 51322.1-2011: Plugs and socket-outlets for household and similar purposes. Part 1. General requirements and methods of tests
GOST R 51322.1-99: Plugs and socket-outlets for household and similar purposes. Part 1. Requirements and methods of tests
GOST R 51324.1-2005: Switches for household and similar fixed electrical installations. General requirements and tests methods
GOST R 51324.1-99: Switches for household and similar fixed electrical installations. Part 1. General specifications and methods of tests
GOST R 51350-99: Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 1. General requirements
GOST R 51672-2000: Metrological ensuring of product testing for the assurance of conformity. General principles
GOST R 52350.17-2006: Electrical apparatus for explosive gas atmospheres. Part 17. Inspection and maintenance of electrical installations in hazardous areas (other than mines)
GOST R IEC 61557-2-2005: Low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 2. Insulation resistance
GOST R ISO/IEC 17025-2006: General requirements for the competence of testing and calibration laboratories
RD 34.45-51.300-97: Electrical equipment testing scope and standards.
SNiP 3.01.04-87: Project acceptance for operation after construction
The Document is Referenced By:
GOST 30852.16-2002: Explosion-prooof electrical apparatus. Part 17. Inspection and maintenance of electrical installations in hazardous areas (other than mines)
GOST IEC 62135-1-2017: Resistance welding eguipment. Part 1. Safety reguirements for design, manufacture and installation
GOST R 50571.16-2007: Low-voltage electrical installations. Part 6. Tests
GOST R 50571.25-2001: Electrical installations of buildings. Part 7. Requirements for special installations. Electrical installations of buildings and structures with electrical heating of floors and surfaces
GOST R 50571.5.53-2013: Low-voltage electrical installations. Part 5-53. Selection and erection of electrical equipment. Isolation, switching and control
GOST R 50571.7.717-2011: Low-voltage electrical installations. Part 7-717. Requirements for special installations or locations. Mobil or transportable units
GOST R 50571.7.722-2017: Low-voltage electrical installations. Part 7-722. Requirements for special installations or locations. Supplies for electric vehicles
GOST R 50571-4-44-2011: Low-voltage electrical installations. Part 4-44. Safety requirements. Protection against voltage disturbances and electromagnetic disturbances
GOST R 50571-7-753-2013: Low-voltage electrical installations. Part 7-753. Requirements for special installations or locations. Floor and ceiling heating systems
GOST R 51838-2012: Safety of machinery. Electrical equipment for industrial machines. Test methods
GOST R 54418.1-2012: Renewable power engineering. Wind power engineering. Wind turbines. Part 1. Technical requirements
GOST R 54435-2011: Wind power plant constructions. Base safety requirements
GOST R 55605-2013: Design and installation of electrical installations of coal mines and underground workings
GOST R 58092.2.1-2020: Electric energy storage systems (EES). Installation parameters and test methods. general description
GOST R 58092.3.1-2020: Electric energy storage systems (EES). Design and evaluation of operating parameters. General requirements
GOST R 58761-2019: Mobile buildings (inventory). Electrical installations. Technical specifications
GOST R IEC 60079-17-2010: Explosive atmospheres. Part 17. Electrical installations inspection and maintenance
GOST R IEC 60950-22-2009: Information technology equipment. Safety. Part 22. Equipment to be installed outdoors
GOST R IEC 61241-17-2009: Electrical apparatus for use in the presence of combustible dust. Part 17. Inspection and maintenance of electrical installations in hazardous areas (other than mines)
GOST R ISO 22734-2-2014: Hydrogen generators using water electrolysis process. Part 2. Residential applications
SP 256.1325800.2016: Electrical equipment of residential and public buildings. Rules of design and erection
TSN 21-302-2000: Requirements for Installation and Operation of Fire Alarm Devices and Electric Power Emergency Disconnect Means. Design of Refuse Removal Systems and Automatic Fire Suppression Systems for Refuse Chutes in Residential, Public, and Utility Occupancies
|
Customers Who Viewed This Item Also Viewed:
 |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
High strength rolled steel. General specification
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
