GOST R 53676-2009

ГОСТ Р 53676-2009

Filters for the trunk oil pipelines. General requirements

Фильтры для магистральных нефтепроводов. Общие требования

Status: Effective - Introduced for the first time

This standard applies to filters placed on oil pumping stations of trunk oil pipelines with a conditional passage of up to 1200 mm and an operating pressure of up to 10.0 MPa inclusive. This standard establishes requirements for filters designed to clean pumped oil from solid objects and particles contained in it. This standard is mandatory for use in the design, manufacture and acceptance, as well as the operation, transportation and disposal of filters for trunk pipelines. This standard is applicable when carrying out work on conformity assessment, including the certification of products

Настоящий стандарт распространяется на фильтры, размещаемые на нефтеперекачивающих станциях магистральных нефтепроводов с условным проходом до 1200 мм и рабочим давлением до 10,0 МПа включительно. Настоящий стандарт устанавливает требования на фильтры, предназначенные для очистки перекачиваемой нефти от содержащихся в ней твердых предметов и частиц. Настоящий стандарт является обязательным для применения при проектировании, изготовлении и приемке, а также эксплуатации, транспортировании и утилизации фильтров для магистральных нефтепроводов. Настоящий стандарт применим при проведении работ по подтверждению соответствия, в том числе при сертификации продукции

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 32

Approved: Federal Agency for Technical Regulation and Metrology, 12/15/2009

SKU: RUSS70796

Price: $422.92




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 23 Hydraulic and pneumatic systems and components for general use. »

Welding regulations » Welding work »

Welding regulations » Main materials »

Welding regulations » Pipelines »

Welding regulations » Metal structures »

Welding regulations » Welding staff »

Welding regulations » Certification »

Welding regulations » Documentation »

Welding regulations » Non-destructive control »

Welding regulations » Mechanical Testing »

Welding regulations » Heat treatment »

Welding regulations » Defects »

Welding regulations » Welding work » Dusting »

Welding regulations » Main materials » Steel, cast iron »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 010/2011 TR CU. On safety of machinery and equipment » Regulations and standards (to ТР ТС ТС 010/2011) »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 032/2013 TR CU. On safety of overpressure equipment » Regulations and standards (to 032/2013 TR CU) »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.13 Testing and control of products of engineering industry » 4.13.1 Machinery, equipment and components for general engineering applications » 4.13.1.7 Gas generators and cleaning devices »

ISO classifier » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.040 Pipelines and their components » 23.040.01 Pipelines and their components in general »

National standards » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.040 Pipelines and their components » 23.040.01 Pipelines and their components in general »

ISO classifier » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.100 Volumetric hydraulic actuators and pneumatic actuators » 23.100.60 Filters, seals and pollution of liquids and gases »

National standards » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.100 Volumetric hydraulic actuators and pneumatic actuators » 23.100.60 Filters, seals and pollution of liquids and gases »

National Standards for KGS (State Standards Classification) » Latest edition » G Machines, equipment and tools » G4 Machinery and equipment for heavy industry » G43 Machines and equipment for oil producing, oil refining and gas industry »


The Document References:

GOST 12.1.005-88: General sanitary requirements for working zone air

GOST 12.1.007-76: Noxious substances. Classification and general safety requirements

GOST 12.1.010-76: Explosion safety. General requirements

GOST 12.2.003-91: Industrial equipment. General safety requirements

GOST 12.2.044-80: Occupational safety standards system. Machines and equipment for oil transportation. Safety requirements

GOST 12.2.063-81: Occupational safety standards system. Industrial pipeline valves. General safety requirements

GOST 12.3.009-76: Occupational safety standards system. Loading and unloading works General safety requirements

GOST 12816-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). General technical requirements

GOST 12971-67: Rectangular plates for machines and devices. Dimensions

GOST 13716-73: Slinging arrangements for vessels and apparatus. Specifications

GOST 14192-96: Cargo marking

GOST 14249-89: Vessels and apparatus. Norms and methods of strength calculation

GOST 15.309-98: System of product development and launching into manufacture. Test and acceptance of produced goods. Principal positions

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 16350-80: Climate of the USSR. Regionalizing and statistical parameters of climatic factors for technical purposes

GOST 19281-89: Rolled steel with increased strength. General specifications

GOST 20799-88: Industrial oils Specifications

GOST 21752-76: Man-machine system Control hand wheels and steering wheels General ergonomic requirements

GOST 22727-88: Rolled sheet. Ultrasonic test methods

GOST 23170-78: Packing for products of engineering industry. General requirements.

GOST 24297-87: Input inspection of products. General provisions.

GOST 26349-84: Tube connections and fittings. Nominal pressures. Series

GOST 27.002-89: Industrial product dependability. General principles. Terms and definitions

GOST 28338-89: Nominal bores (nominal sizes)

GOST 28702-90: Non-destructive testing. Ultrasonic thickness gauges. General technical requirements

GOST 28759.5-90: Flanges of vessels and apparatuses

GOST 2999-75: Metals and alloys. Vickers hardness teat by diamond pyramid

GOST 30546.1-98: General requirements for machines, instruments and other industrial products and calculation methods for their complex structures as to seismic stability

GOST 305-82: Diesel fuel. Specifications

GOST 4543-71: Structural alloyed steel

GOST 5520-79: Carbon, low-alloy and alloy sheet steel for boilers and pressure vessels. Specifications

GOST 6533-78: Ellipsoidaldished heads flanged made of steel for vess els apparatus and boilers. Basis dimensions

GOST 6996-66: Welded joints. Methods of mechanical properties determination

GOST 8479-70: Structural carbon and alloy steel forgings

GOST 8732-78: Seamless hot-deformed steel pipes. Range of sizes

GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements

GOST 9.407-84: Unified system of corrosion and ageing protection. Paint coatings. Method of appearance rating.

GOST 9012-59: Metals. Method of Brinell hardness measurement

GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature

GOST 9544-2005: Pipeline gate valves. Classes and rates of gates sealibility

GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions

GOST R 51164-98: Steel pipe mains. General requirements for corrosion protection

GOST R 51313-99: Motor petrols. General technical requirements

GOST R 51858-2002: Crude petroleum. General specifications

GOST R 52079-2003: Steel welded pipes for trunk gas pipelines, oil pipelines and oil products pipelines. Specifications

GOST R 52720-2007: Pipeline valves. Terms and definitions

PB 03-273-99: Rules for qualification test of welders and welding production specialists

PB 03-576-03: Regulations of design and safe operation of pressure vessels

PB 03-584-03: Rules of design, manufacturing and acceptance of welded steel vessels and apparatuses

Federal Law 184-FZ: About technical regulation

GOST 27.003-90: Reliability in engineering. Make-up and general rules for assigning reliability requirements

Customers Who Viewed This Item Also Viewed:

Electromagnetic compatibility of technical equipment. Immunity of equipment for general lighting purposes to electromagnetic disturbance. Requirements and test methods
Language: English
Price: $218.25
Unified system for design documentation. Exploitative documents
Language: English
Price: $150.48
Еlectromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <= 16 A per phase). Limits and test methods
Language: English
Price: $410.31
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
Language: English
Price: $714.89
Еlectromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A and not subject to conditional connection. Limits and test methods
Language: English
Price: $359.87
Pipeline valves. General safety requirements
Language: English
Price: $213.84
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Conformity assessment system for the use of nuclear energy. Personnel in the non-destructive and destructive testing of metal. Requirements and qualification procedure Дата введения в действие 15.03.2018
Language: English
Price: $207.90
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Language: English
Price: $121.77
Unified system of corrosion and ageing protection. Paint coatings. Groups of operation conditions
Language: English
Price: $158.40
Atom stations. Equipment, instruments, means of monitoring and control systems. General technical requirements
Language: English
Price: $1,146.54
System of design documents for construction. Basic requirements for design and working documentation
Language: English
Price: $867.18
Hoisting cranes. Rules and test methods
Language: English
Price: $393.39
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $212.85
Non-destructive Testing. Welded Joints. Ultrasonic Methods
Language: English
Price: $140.58
Compilation and execution of safety data sheet of chemical products
Language: English
Price: $175.23
Cable products for nuclear power plants. Technical requirements of the operating organization
Language: English
Price: $449.11
Rolling stock of railways. Springs cylindrical screw. Certification requirements
Language: English
Price: $175.65
Loads and actions
Language: English
Price: $495.00
Technical Regulations of the Eurasian Economic Union "On Restriction of the Use of Hazardous Substances in Electrical and Radioelectronic Products"
Language: English
Price: $83.16

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!