GOST R 54153-2010
ГОСТ Р 54153-2010
Steel. Method of atomic emission spectral analysis
Сталь. Метод атомно-эмиссионного спектрального анализа
Status: Effective - Introduced for the first time. IUS 4-2012
This standard establishes the atomic emission spectral method with photoelectric registration of the spectrum to determine the mass fraction of elements in steel
Настоящий стандарт устанавливае�� атомно-эмиссионный спектральный метод с фотоэлектрической регистрацией спектра для определения в стали массовой доли элементов
Format: Electronic (pdf/doc)
Page Count: 32
Approved: Federal Agency for Technical Regulation and Metrology,
The Product is Contained in the Following Classifiers:
Construction (Max) »
Other state standards used in construction »
77 Metallurgy »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.12 Testing and control of products of metallurgical industry »
4.12.1 Ferrous metals »
ISO classifier »
77 METALLURGY »
77.080 Ferrous metals »
77.080.20 Steel »
National standards »
77 METALLURGY »
77.080 Ferrous metals »
77.080.20 Steel »
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 10157-79: Gaseous and liquid argon. Specifications
GOST 12.0.004-90: Organization of training for labor safety. General rules
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.019-79: Occupational safety standards system. Electric safety. General requirements and nomenclature of kinds of protection
GOST 12.4.009-83: Fire-fighting equipment for protection of units. Basic types. Location and maintenance
GOST 21963-2002: Grinding wheels for cutting-off. Specifications
GOST 6456-82: Abrasive paper
GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition
GOST 8.315-97: Standard samples for composition and properties of substances and materials
GOST 859-2001: Copper. Grades
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 52361-2005: Analytical control of the object. Terms and definitions
GOST R 52781-2007: Grinding and tool-grinding wheels. Specifications
GOST R 8.563-2009: State system for ensuring the uniformity of measurements. Procedures of measurements
GOST R ISO 5725-1-2002: Accuracy (trueness and precision) of measurement methods and results. Part 1. General principles and definitions
GOST R ISO 5725-6-2002: Accuracy (trueness and precision) of measurement methods and results. Part 6. Use in practice of accuracy values
MI 1317-2004: State system for ensuring uniformity of measurements. Results and characteristics of the measurement error. Forms of representation. Ways to use during testing of product samples and control over the parameters of product samples and control of their para
R 50.2.056-2007: State system for ensuring the uniformity of measurements. Certified reference materials. Terms and definitions
RMG 29-99: State system for ensuring the uniformity of measurements. Metrology. Basic terms and definitions
RMG 61-2003: State system for ensuring the uniformity of measurements. Accuracy, trueness and precision measures of the procedures for quantitative chemical analysis. Methods of determination
RMG 91-2009: State system for ensuring the uniformity of measurements. Joint use of concepts 'error of measurement' and 'uncertainty of measurement'. General principles
The Document is Referenced By:
GOST 1050-2013: Metal products from nonalloyed structural quality and special steels. General specification
GOST 14959-2016: Spring nonalloy and alloy steel product. Specifications
GOST 30803-2014: Transmission tooth gears of the traction railway stock. Specifications
GOST 34028-2016: Reinforcing rolled products for reinforced concrete constructions. Specifications
GOST 34636-2020: Pipe billet. General specifications
GOST 4041-2017: Hot-rolled thick-rolled for cold stamping from non-alloyed constructional quality steel. Technical conditions
GOST 4543-2016: Metal products from structural alloy steel. Specification
GOST 5632-2014: Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
GOST 5949-2018: Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
GOST 7370-2015: Railway frogs. Specifications
GOST R 50.05.17-2019: Conformity assessment system in the field of atomic energy use. Steel castings for equipment and pipelines of nuclear power plants. Control procedure
GOST R 51045-2014: Rails of ways technological railways transport. General specifications
GOST R 51685-2013: Railway rails. General specifications.
GOST R 55374-2012: Alloyed structural rolled steel for bridge building. General specifications
GOST R 55498-2013: Rolled wheel centres for railway rolling stock. Technical specifications
GOST R 55820-2013: Switch and crossing rails. Specifications
GOST R 56299-2014: Rolled products from bearing steel. Specifications
GOST R 57179-2016: Thermite welding of rails. The method of testing and quality control
GOST R 57180-2016: Welding joints. Methods for determination of mechanical properties, macrostructure and microstructure
GOST R 57837-2017: Hot-rolled steel I-beams with parallel edges of flanges. Specifications
GOST R 58177-2018: United power system and isolated power systems. Thermal power plants. Thermal-mechanical equipment of thermal power plants. Control of condition of metal. Norms and requirements
GOST R 58389-2019: Bent steel sheet profiles with trapezoidal corrugations for steel-reinforced concrete structures. Technical specifications
GOST R 58915-2020: Rolled plates of cryogenic steels. Specifications
PNST 394-2020: Steel pipes for the manufacture of equipment and pipelines of nuclear plants. General specifications. Part 1. Seamless steel pipes from unalloyed and alloyed steels
ST RK 2432-2013: Railway rails differentially strengthened and not-heat-strengthened. General specification
Customers Who Viewed This Item Also Viewed:
Man-machine system. Operator's arm-chair. General ergonomic requirements
Traction railway stock wheelsets of 1520 mm gauge railways. General specifications
Safety of machinery. Guards. General requirements for the design and construction of fixed and movable guards
Safety of machinery. Interlocking devices associated with guards. Principles for design and selection
Seismic building design code
Conformity assessment. The procedure for conducting inspection control in certification procedures
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.