GOST R ISO 4254-1-2011
ГОСТ Р ИСО 4254-1-2011
|
|
Agricultural machinery. Safety requirements. Part 1. General requirements
Машины сельскохозяйственные. Требования безопасности. Часть 1. Общие требования
Status: Effective - Introduced for the first time
This standard establishes general safety requirements and their assessment in the design and manufacture of self-propelled, mounted, semi-mounted and trailed agricultural machines, except for tractors, agricultural aviation, transport equipment on air cushions and gardening equipment. This standard may not contain all hazards specific to the design of a particular type of machine. In this case, the provisions of the standard for a particular machine have an advantage over this standard. This standard does not consider environmental, safety, traffic, electromagnetic compatibility, and power transmission shafts. The standard also does not contain safety requirements for rotating parts for transmitting torque (except for requirements for fencing and vibration. This standard does not consider safety requirements related to the types of maintenance and repair that should be carried out by professionally trained service personnel. The requirements of this standard apply to machines developed after its introduction
Настоящий стандарт устанавливает общие требования безопасности и их оценку при разработке и производстве самоходных, навесных, полунавесных и прицепных сельскохозяйственных машин, кроме тракторов, сельскохозяйственной авиационной, транспортной техники на воздушных подушках и садово-огородного инвентаря. Данный стандарт может содержать не все опасности, характерные для конструкции конкретного типа машин. В этом случае положения стандарта на конкретную машину обладают преимуществом по отношению к данному стандарту. В настоящем стандарте не рассматриваются экологические требования, требования безопасности, относящиеся к дорожному движению, электромагнитной совместимости и валу передачи мощности. Стандарт не содержит также требований безопасности к вращающимся частям для передачи крутящего момента (кроме требований к ограждениям и вибрации. В данном стандарте не рассматриваются требования безопасности, связанные с видами технического обслуживания и ремонта, которые должны осуществляться профессионально подготовленным обслуживающим персоналом. Требования данного стандарта распространяются на машины, разработанные после введения его в действие
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
7/8/2011
SKU: RUSS70856
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.2 Operation of production machines and equipment »
ISO classifier »
65 AGRICULTURE »
65.060 Agricultural machinery, accessories and equipment »
65.060.01 Agricultural machinery and equipment in general »
National standards »
65 AGRICULTURE »
65.060 Agricultural machinery, accessories and equipment »
65.060.01 Agricultural machinery and equipment in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T5 Documentation System »
T58 System of standards infield of nature conservation and improvement of use of natural resources, labor safety, scientific organization of labor »
The Document References:
GOST 12.1.003-83: Noise. General safety requirements
GOST 12.1.050-86: Occupational safety standards system. Methods of noise measurement at work-places
GOST 12.2.120-2005: Occupational safety standards system. Cabs and operator’s workplaces of tractors and powered agricultural machines. General safety requirements
GOST 26336-84: Tractors, machinery for agricultural and forestry, powered lawn and garden equipment. System of symbols for designation of operating controls and means of illustration of information. Symbols
GOST 26879-88: Agricultural tractors. Safety belts. Specification and test methods
GOST 27388-87: Documents for operation and maintenance of agricultural technique
GOST 30869-2003: Safety of machinery. Safety requirements for fluid power systems and their components. Pneumatics
GOST 31177-2003: Safety of machinery. Safety requirements for fluid power systems and their components. Hydraulics
GOST 31296.1-2005: Noise. Description, measurement and assessment of environmental noise. Part 1. Basic quantities and assessment procedures
GOST ISO 4253-2005: Agricultural tractors. Operator's seating accommodation. Dimensions
GOST R 12.4.026-2001: Occupational safety standards system. Safety colors, safety signs and signal marking. Purpose and rules of application. General technical requirements and characteristics. Test methods
GOST R 51334-99: Safety of machinery. Safety distances to prevent danger zones being reached by the upper limbs
GOST R ISO 12100-1-2007: Safety of machinery. Basic concepts, general principles for design. Part 1. Basic terminology, methodology
The Document is Referenced By:
GOST 12.2.019-2015: Occupational safety standards system. Tractors and agricultural machinery. General safety requirements
GOST 12.2.042-2013: Occupational safety standards system. Machines and technological equipment for live-stock-raising and forage production. General safety requirements
GOST 12.2.120-2015: Occupational safety standards system. Cabs and operator’s workplaces of tractors and powered agricultural machines. General safety requirements
GOST 28301-2015: Grain harvesters. Test methods
GOST 28306-2018: Agricultural machinery. Potato planters. Test methods
GOST 28718-2016: Agricultural machinery. Machine for introduction of solid organic fertilizers. Test methods
GOST 28722-2018: Agricultural machinery. Mowers and mower conditioners. Test methods
GOST 31345-2017: Agricultural machinery. Tractor seeders. Test methods
GOST 32617-2014: Irrigation machines. Safety
GOST 33687-2015: Machines and tools for surface treatment of soil. Methods of tests
GOST 33734-2016: Agricultural machinery. Combines and machines for cleaning up of flax. Test methods
GOST 34265-2017: Agricultural machinery. Forage harvesting machines. Test methods
GOST 34390-2018: Agricultural machinery. Machines for harvesting the tops of root crops. Test methods
GOST 34391-2018: Agricultural machinery. Technical grape harvesting machines. Test methods
GOST 34392-2018: Agricultural machinery. Planting machines. Test methods
GOST 34499-2018: Agricultural machinery. Machines for harvesting vegetables and gourds. Test methods
GOST 34629-2019: Agricultural machinery. Roller headers. Test methods
GOST 34748-2021: Agricultural machinery. Feed dispensers. Test methods
GOST R 58249-2018: Machines for planting, harvesting, post-harvest processing of potatoes. Technical requirements
|
Customers Who Viewed This Item Also Viewed:
 |
Tight and slack wooden barrels
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Software for measuring instruments. Procedure for of certification. General provisions
Language: English |
Vegetable oils. General technical requirements
Language: English |
Current transformers. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
